Rev Author Line No. Line
2752 kaklik 1 /**** Automatic weather station 01A ****/
2 #define VERSION "0.1"
2806 kakl 3 #define ID "$Id: main.c 2837 2013-03-15 18:24:46Z kaklik $"
2751 kaklik 4 #include "main.h"
2828 kaklik 5 #include ".\common\dbloader.h"
2752 kaklik 6 #include <string.h>
2751 kaklik 7  
2752 kaklik 8 #CASE // Case sensitive compiler
9  
10 #define SEND_DELAY 50 // Time between two characters on RS232
11  
12 char VER[4]=VERSION; // Buffer for concatenate of a version string
13  
2826 kaklik 14 #define ONE_WIRE_PIN PIN_B1 // DS18B20 sensor connection
2751 kaklik 15 #include "..\ds1820.c"
16  
2781 kaklik 17 #define sht_data_pin PIN_D0 // SHT11 sensor connection
2779 kaklik 18 #define sht_clk_pin PIN_D1
2768 kaklik 19 #include "..\SHT.c"
20  
2781 kaklik 21 #define CSN_SPI PIN_C2 // preassure sensor connection
2779 kaklik 22 #include "..\MPL115A1.c"
2768 kaklik 23  
2782 kaklik 24 unsigned int16 timer0_overflow_count=0;
25 float anemo=0;
26  
27  
28 #int_TIMER1
29 void TIMER1_isr(void)
30 {
31 output_toggle(PIN_D1);
32 anemo = ((timer0_overflow_count * 0xFF) + get_timer0())/(32768.0/0xFFFF);
2788 kaklik 33 timer0_overflow_count=0;
34 set_timer0(0);
2782 kaklik 35 }
36  
37 #int_TIMER0
38 void TIMER0_isr(void)
39 {
40 timer0_overflow_count++;
41 }
42  
43  
44  
2752 kaklik 45 void welcome(void) // Welcome message
46 {
47 char REV[50]=ID; // Buffer for concatenate of a version string
48  
49 if (REV[strlen(REV)-1]=='$') REV[strlen(REV)-1]=0;
2780 kaklik 50 printf("\r\n\r\n# AWS01A %s (C) 2013 www.mlab.cz \r\n",VER); // Welcome message
2752 kaklik 51 printf("#%s\r\n",&REV[4]);
2835 kaklik 52 printf("# ver seq temp[mK] hum_temp[mK] hum[%%] ");
53 printf("bar_temp[mK] pressure[hPa] Anemo[pls/s]check\r\n\r\n");
2752 kaklik 54  
2827 kaklik 55 restart_wdt(); //---WDT
2752 kaklik 56 }
57  
2751 kaklik 58 void main()
59 {
2752 kaklik 60 unsigned int16 seq=0;
2751 kaklik 61  
2822 kaklik 62 setup_adc_ports(NO_ANALOGS|VSS_VDD);
2751 kaklik 63 setup_adc(ADC_CLOCK_DIV_2);
2782 kaklik 64 setup_timer_0(RTCC_EXT_L_TO_H|RTCC_DIV_1);
65 setup_timer_1(T1_EXTERNAL|T1_DIV_BY_1|T1_CLK_OUT);
2751 kaklik 66 setup_timer_2(T2_DISABLED,0,1);
67 setup_ccp1(CCP_OFF);
2823 kaklik 68 setup_comparator(NC_NC_NC_NC); // This device COMP currently not supported by the PICWizard
2834 kaklik 69 // setup_oscillator(OSC_8MHZ); // pri prouziti bootloaderu neni treba nastavovat
70 // setup_wdt(WDT_1152MS|WDT_DIV_16);
2779 kaklik 71 setup_spi(SPI_MASTER | SPI_MODE_0 | SPI_CLK_DIV_64);
72 output_high(CSN_SPI);
2782 kaklik 73  
2779 kaklik 74 delay_ms(100);
2751 kaklik 75  
2834 kaklik 76 welcome(); // welcome print and device indentification
2752 kaklik 77  
2768 kaklik 78 sht_init();
2779 kaklik 79 MPL_init(); // get correction coefficients from the sensor
2768 kaklik 80  
2834 kaklik 81 // enable_interrupts(INT_TIMER1); // interrupts used for anemometer readings
82 // enable_interrupts(INT_TIMER0);
83 // enable_interrupts(GLOBAL);
2822 kaklik 84  
2751 kaklik 85 while (TRUE)
86 {
2768 kaklik 87 char output[8]; // Output buffer
88 int8 j; // String pointer
89 int8 check=0; // Checksum is calculated between '$' and '*'
90 float SHT_temp,SHT_hum;
2779 kaklik 91 float local_temp;
92 float barometer_temperature, barometer_pressure;
2768 kaklik 93  
2835 kaklik 94 delay_ms(1000);
2752 kaklik 95 { // printf
96  
2835 kaklik 97 local_temp = ds1820_read()+27315;
2768 kaklik 98 sht_rd(SHT_temp,SHT_hum);
2837 kaklik 99 SHT_temp = (SHT_temp + 273.15)*100;
100 barometer_temperature = (MPL_get_temperature() + 273.15)*100;
2835 kaklik 101 barometer_pressure = MPL_get_pressure() * 10.0; // conversion to hectopascals
2779 kaklik 102  
2752 kaklik 103 delay_us(SEND_DELAY);
104 putc('$');
105 delay_us(SEND_DELAY);
106 sprintf(output,"AWS%s \0",VER);
107 j=0; while(output[j]!=0) { delay_us(SEND_DELAY); putc(output[j]); check^=output[j++]; }
108 sprintf(output,"%Lu \0", seq);
109 j=0; while(output[j]!=0) { delay_us(SEND_DELAY); putc(output[j]); check^=output[j++]; }
2835 kaklik 110 sprintf(output,"%5.0f \0", local_temp );
2752 kaklik 111 j=0; while(output[j]!=0) { delay_us(SEND_DELAY); putc(output[j]); check^=output[j++]; }
2837 kaklik 112 sprintf(output,"%5.0f \0", SHT_temp);
2768 kaklik 113 j=0; while(output[j]!=0) { delay_us(SEND_DELAY); putc(output[j]); check^=output[j++]; }
2779 kaklik 114 sprintf(output,"%3.1f \0", SHT_hum);
2768 kaklik 115 j=0; while(output[j]!=0) { delay_us(SEND_DELAY); putc(output[j]); check^=output[j++]; }
2837 kaklik 116 sprintf(output,"%5.0f \0", barometer_temperature);
2779 kaklik 117 j=0; while(output[j]!=0) { delay_us(SEND_DELAY); putc(output[j]); check^=output[j++]; }
118 sprintf(output,"%5.1f \0", barometer_pressure);
119 j=0; while(output[j]!=0) { delay_us(SEND_DELAY); putc(output[j]); check^=output[j++]; }
2782 kaklik 120 sprintf(output,"%3.1f \0", anemo);
121 j=0; while(output[j]!=0) { delay_us(SEND_DELAY); putc(output[j]); check^=output[j++]; }
2752 kaklik 122 sprintf(output,"*%X\r\n\0", check);
123 j=0; while(output[j]!=0) { delay_us(SEND_DELAY); putc(output[j++]); }
124 delay_us(SEND_DELAY);
125 }
126  
127 //---WDT
128 restart_wdt();
129 seq++; // Increment the number of measurement
2751 kaklik 130 }
131 }
2828 kaklik 132