Rev Author Line No. Line
4252 kaklik 1 DISPLAY_height = 101;
2 DISPLAY_width = 166;
4260 kaklik 3 DISPLAY_depth = 5.4;
4 DISPLAY_visible_height = 91.6;
5 DISPLAY_visible_width = 158.6;
4213 kaklik 6  
4260 kaklik 7  
4213 kaklik 8 FP_width = 234;
9 FP_height = 125;
4260 kaklik 10 FP_thickness = 7;
4213 kaklik 11 clearance = 0.75;
12  
4260 kaklik 13 use <./../../../../../Library/Graphics/MLAB_logo.scad>
4213 kaklik 14  
15  
4252 kaklik 16 difference () {
4213 kaklik 17  
4252 kaklik 18 difference () {
19 color("green")
4260 kaklik 20 linear_extrude(height = FP_thickness, scale = 0.98)
4252 kaklik 21 square([FP_width, FP_height], center = true);
22  
4260 kaklik 23 translate([-23,0,DISPLAY_depth/2]){
24 translate([(-2.4/2),(4.4/2),0])
25 cube([DISPLAY_visible_width, DISPLAY_visible_height, DISPLAY_depth+10], center= true);
4252 kaklik 26 cube([DISPLAY_width, DISPLAY_height, DISPLAY_depth], center= true);
27 }
28  
29  
30 // Front metal panel mount holes - not mounting of printed pannel
31 //=====================================
32 translate([0,61,0]) // center top screw
33 cylinder(20, d=10, center=true);
4213 kaklik 34  
4252 kaklik 35 translate([-100,61,0]) // top left screw.
36 cylinder(20, d=10, center=true);
4213 kaklik 37  
4252 kaklik 38 translate([-115.5,40,0]) // top left screw.
39 cylinder(20, d=10, center=true);
4213 kaklik 40  
4252 kaklik 41 translate([-115.5,-40,0]) // top left screw.
42 cylinder(20, d=10, center=true);
4213 kaklik 43  
4252 kaklik 44 translate([-100,-61,0]) // bottom left screw.
45 cylinder(20, d=10, center=true);
4213 kaklik 46  
4252 kaklik 47 translate([0,-61,0]) // center bottom screw
48 cylinder(20, d=10, center=true);
4213 kaklik 49  
4252 kaklik 50 translate([100,61,0]) // top right screw.
51 cylinder(20, d=10, center=true);
4213 kaklik 52  
4252 kaklik 53 translate([115.5,40,0]) // top right screw.
54 cylinder(20, d=10, center=true);
4213 kaklik 55  
4252 kaklik 56 translate([115.5,-40,0]) // top right screw.
57 cylinder(20, d=10, center=true);
58  
59 translate([100,-61,0]) // bottom right screw.
60 cylinder(20, d=10, center=true);
61 //=======================================
62 //Printed panel mount holes.
63 ///////////////////////////////////////////////////////////
64  
65 translate([5.5, 52, 0]) // center top screw
66 cylinder(20, d=3.5, center=true);
67  
68 translate([-107.5, 52, 0]) // top left screw.
69 cylinder(20, d=3.5, center=true);
70  
71 translate([-5.5, 52 ,0]) // top left screw.
72 cylinder(20, d=3.5, center=true);
73  
74 translate([107.5, 52,0]) // top left screw.
75 cylinder(20, d=3.5, center=true);
76  
77  
78  
79  
80 translate([-107.5,5,0]) // center left screw.
81 cylinder(20, d=3.5, center=true);
82  
83 translate([-107.5,-5,0]) // center left screw
84 cylinder(20, d=3.5, center=true);
85  
86 translate([107.5,5,0]) // top right screw.
87 cylinder(20, d=3.5, center=true);
88  
89 translate([107.5,-5,0]) // top right screw.
90 cylinder(20, d=3.5, center=true);
91  
92  
93  
94 translate([-107.5, -52,0]) // top right screw.
95 cylinder(20, d=3.5, center=true);
96 translate([-5.5, -52,0]) // bottom right screw.
97 cylinder(20, d=3.5, center=true);
98 translate([5.5, -52,0]) // bottom right screw.
99 cylinder(20, d=3.5, center=true);
100 translate([107.5, -52,0]) // top right screw.
101 cylinder(20, d=3.5, center=true);
4260 kaklik 102  
103 // MLAB logo on the side
104  
105 union (){
106 translate ([83,30, 6]) // ODROIDs passive components hole.
107 scale(v = [0.2, 0.2, 0.2])
108 MLAB_logo_short();
109 }
110  
4252 kaklik 111 }
112 // translate([100, 0, 0]) // top right screw. // crop left or right half of the panel to fit it in printer
113 translate([-100, 0, 0]) // top right screw. // crop left or right half of the panel to fit it in printer
114 cube(200, 200, 20, center=true);
4260 kaklik 115 }