Rev Author Line No. Line
130 kaklik 1 <?php
2 # vim:et:ts=3:sts=3:sw=3:fdm=marker:
3  
4 // WebSVN - Subversion repository viewing via the web using PHP
5 // Copyright © 2004-2006 Tim Armes, Matt Sicker
6 //
7 // This program is free software; you can redistribute it and/or modify
8 // it under the terms of the GNU General Public License as published by
9 // the Free Software Foundation; either version 2 of the License, or
10 // (at your option) any later version.
11 //
12 // This program is distributed in the hope that it will be useful,
13 // but WITHOUT ANY WARRANTY; without even the implied warranty of
14 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 // GNU General Public License for more details.
16 //
17 // You should have received a copy of the GNU General Public License
18 // along with this program; if not, write to the Free Software
19 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 //
21 // --
22 //
23 // config.inc
24 //
25 // Configuration parameters
26  
27 // --- FOLLOW THE INSTRUCTIONS BELOW TO CONFIGURE YOUR SETUP ---
28  
29 // {{{ PLATFORM CONFIGURATION ---
30  
31 // Uncomment the next line if your running a windows server
32 //
33 // $config->setServerIsWindows();
34  
35 // Configure these lines if your commands aren't on your path.
36 //
37 // $config->setSVNCommandPath('Path/to/svn and svnlook/ e.g. c:\\program files\\subversion\\bin');
38 // $config->setDiffPath('Path/to/diff/command/');
39  
40 // For syntax colouring, if option enabled...
41 // $config->setEnscriptPath('Path/to/enscript/command/');
42 // $config->setSedPath('Path/to/sed/command/');
43  
44 // For delivered tarballs, if option enabled...
45 // $config->setTarPath('Path/to/tar/command/');
46  
47 // For delivered GZIP'd files and tarballs, if option enabled...
48 // $config->setGZipPath('Path/to/gzip/command/');
49  
50 // }}}
51  
52 // {{{ REPOSITORY SETUP ---
53  
54 // There are 2 methods for defining the repositiories available on the system. Either you list
55 // them by hand, in which case you can give each one the name of your choice, or you use the
56 // parent path function, in which case the name of the directory is used as the repository name.
57 //
58 // In all cases, you may optionally supply a group name to the repositories. This is useful in the
59 // case that you need to separate your projects. Grouped Repositories are referred to using the
60 // convention GroupName.RepositoryName
61 //
62 // Performance is much better on local repositories (e.g. accessed by file:///). However, you
63 // can also provide an interface onto a remote repository. In this case you should supply the
64 // username and password needed to access it.
65 //
66 // To configure the repositories by hand, copy the appropriate line below, uncomment it and
67 // replace the name and URL of your repository.
68  
69 // Local repositories (without and with optional group):
70 //
71 // $config->addRepository('NameToDisplay', 'URL to repository (e.g. file:///c:/svn/proj)');
72 // $config->addRepository('NameToDisplay', 'URL to repository (e.g. file:///c:/svn/proj)', 'group');
73  
74 $config->addRepository('MLAB', 'file:///home/MLAB');
75  
76 //
77 // Remote repositories (without and with optional group):
78 //
79 // $config->addRepository('NameToDisplay', 'URL (e.g. http://path/to/rep)', NULL, 'username', 'password');
80 // $config->addRepository('NameToDisplay', 'URL (e.g. http://path/to/rep)', 'group', 'username', 'password');
81 //
82 // To use the parent path method, uncomment the newt line and and replace the path with your one. You
83 // can call the function several times if you have several parent paths. Note that in this case the
84 // path is a filesystem path
85 //
86 // $config->parentPath('Path/to/parent (e.g. c:\\svn)');
87  
88 //$config->parentPath('/home/');
89 // }}}
90  
91 // {{{ LOOK AND FEEL ---
92 //
93 // Uncomment ONLY the template file that you want.
94  
95 $config->setTemplatePath("$locwebsvnreal/templates/Standard/");
96 // $config->setTemplatePath("$locwebsvnreal/templates/BlueGrey/");
97 // $config->setTemplatePath("$locwebsvnreal/templates/Zinn/");
98  
99 // You may also specify a per repository template file by uncommenting and changing the following
100 // line as necessary. Use the convention "groupname.myrep" if your repository is in a group.
101  
102 // $config->setTemplatePath('$locwebsvnreal/templates/Standard/', 'myrep'); // Access file for myrep
103  
104 // The index page containing the projects may either be displayed as a flat view (the default),
105 // where grouped repositories are displayed as "GroupName.RepName" or as a tree view.
106 // In the case of a tree view, you may choose whether the entire tree is open by default.
107  
108 // $config->useTreeIndex(false); // Tree index, closed by default
109 // $config->useTreeIndex(true); // Tree index, open by default
110  
111 // By default, WebSVN displays a tree view onto the current directory. You can however
112 // choose to display a flat view of the current directory only, which may make the display
113 // load faster. Uncomment this line if you want that.
114  
115 // $config->useFlatView();
116  
117 // }}}
118  
119 // {{{ LANGUAGE SETUP ---
120  
121 // WebSVN uses the iconv module to convert messages from your system's character set to the
122 // UTF-8 output encoding. If you find that your log messages aren't displayed correctly then
123 // you'll need to change the value here.
124 //
125 // You may also specify the character encoding of the repository contents if different from
126 // the system encoding. This is typically the case for windows users, whereby the command
127 // line returns, for example, CP850 encoded strings, whereas the source files are encoded
128 // as iso-8859-1 by Windows based text editors. When display text file, WebSVN will convert
129 // them from the content encoding to the output encoding (UTF-8).
130 //
131 // WebSVN does its best to automate all this, so only use the following if it doesn't work
132 // "out of the box". Uncomment and change one of the examples below.
133 //
134 // $config->setInputEncoding('CP850'); // Encoding of result returned by svn command line, etc.
135 // $config->setContentEncoding('iso-8859-1'); // Content encoding of all your repositories // repositories
136  
137 // You may also specify a content encoding on a per repository basis. Uncomment and copy this
138 // line as necessary.
139 //
140 // $config->setContentEncoding('iso-8859-1', 'MyEnc');
141  
142 // Note for Windows users: To enable iconv you'll need to enable the extension in your php.ini file
143 // AND copy iconv.dll (not php_iconv.dll) to your Windows system folder. In most cases the correct
144 // encoding is set when you call $config->setServerIsWindows();.
145  
146 // Note for *nix users. You'll need to have iconv compiled into your binary. The default input and
147 // output encodings are taken from your locale informations. Override these if they aren't correct.
148  
149 // Uncomment the default language. If you want English then don't do anything here.
150 //
151 // include('languages/german.inc');
152 // include('languages/french.inc');
153 // include('languages/spanish.inc');
154 // include('languages/portuguese.inc');
155 // include('languages/swedish.inc');
156 // include('languages/slovenian.inc');
157 // include('languages/dutch.inc');
158 // include('languages/danish.inc');
159 // include('languages/finnish.inc');
160 // include('languages/turkish.inc');
161 // include('languages/norwegian.inc');
162 // include('languages/polish.inc');
163 // include('languages/japanese.inc');
164 // include('languages/korean.inc');
165 // include('languages/tchinese.inc');
166 // include('languages/schinese.inc');
167 // include 'languages/russian.inc';
168 // include 'languages/japanese.inc';
169 include 'languages/czech.inc';
170  
171 // }}}
172  
173 // {{{ MULTIVIEWS ---
174  
175 // Uncomment this line if you want to use MultiView to access the repository by, for example:
176 //
177 // http://servername/wsvn/repname/path/in/repository
178 //
179 // Note: The websvn directory will need to have Multiviews turned on in Apache, and you'll need to configure
180 // wsvn.php
181  
182 // $config->useMultiViews();
183  
184 // }}}
185  
186 // {{{ ACCESS RIGHTS ---
187  
188 // Uncomment this line if you want to use your Subversion access file to control access
189 // rights via WebSVN. For this to work, you'll need to set up the same Apache based authentication
190 // to the WebSVN (or wsvn) directory as you have for Subversion itself. More information can be
191 // found in install.txt
192  
193 // $config->useAuthenticationFile('/path/to/accessfile'); // Global access file
194  
195 // You may also specify a per repository access file by uncommenting and copying the following
196 // line as necessary. Use the convention 'groupname.myrep' if your repository is in a group.
197  
198 // $config->useAuthenticationFile('/path/to/accessfile', 'myrep'); // Access file for myrep
199  
200 // }}}
201  
202 // {{{ FILE CONTENT ---
203 //
204 // You may wish certain file types to be GZIP'd and delieved to the user when clicked apon.
205 // This is useful for binary files and the like that don't display well in a browser window!
206 // Copy, uncomment and modify this line for each extension to which this rule should apply.
207 // (Don't forget the . before the extension. You don't need an index between the []'s).
208 // If you'd rather that the files were delivered uncompressed with the associated MIME type,
209 // then read below.
210 //
211 // $zipped[] = '.dll';
212  
213 // Subversion controlled files have an svn:mime-type property that can
214 // be set on a file indicating its mime type. By default binary files
215 // are set to the generic appcliation/octet-stream, and other files
216 // don't have it set at all. WebSVN also has a built-in list of
217 // associations from file extension to MIME content type. (You can
218 // view this list in setup.inc).
219 //
220 // Determining the content-type: By default, if the svn:mime-type
221 // property exists and is different from application/octet-stream, it
222 // is used. Otherwise, if the built-in list has a contentType entry
223 // for the extension of the file, that is used. Otherwise, if the
224 // svn:mime-type property exists has the generic binary value of
225 // application/octet-stream, the file will be served as a binary
226 // file. Otherwise, the file will be brought up as ASCII text in the
227 // browser window (although this text may optionally be colourised.
228 // See below).
229 //
230 // Uncomment this if you want to ignore any svn:mime-type property on your
231 // files.
232 //
233 // $config->ignoreSvnMimeTypes();
234 //
235 // Uncomment this if you want skip WebSVN's custom mime-type handling
236 //
237 // $config->ignoreWebSVNContentTypes();
238 //
239 // Following the examples below, you can add new associations, modify
240 // the default ones or even delete them entirely (to show them in
241 // ASCII via WebSVN).
242  
243 // $contentType['.c'] = 'plain/text'; // Create a new association
244 // $contentType['.doc'] = 'plain/text'; // Modify an existing one
245 // unset($contentType['.m'] // Remove a default association
246  
247 // }}}
248  
249 // {{{ TARBALLS ---
250  
251 // You need tar and gzip installed on your system. Set the paths above if necessary
252 //
253 // Uncomment the line below to offer a tarball download option across all your
254 // repositories.
255 //
256 $config->allowDownload();
257 //
258 // To change the global option for individual repositories, uncomment and replicate
259 // the required line below (replacing 'myrep' for the name of the repository to be changed).
260 // Use the convention 'groupname.myrep' if your repository is in a group.
261  
262 // $config->allowDownload('myrep'); // Specifically allow downloading for 'myrep'
263 // $config->disallowDownload('myrep'); // Specifically disallow downloading for 'myrep'
264  
265 // You can also choose the minimum directory level from which you'll allow downloading.
266 // A value of zero will allow downloading from the root. 1 will allow downloding of directories
267 // in the root, etc.
268 //
269 // If your project is arranged with trunk, tags and branches at the root level, then a value of 2
270 // would allow the downloading of directories within branches/tags while disallowing the download
271 // of the entire branches or tags directories. This would also stop downloading of the trunk, but
272 // see after for path exceptions.
273 //
274 // Change the line below to set the download level across all your repositories.
275  
276 $config->setMinDownloadLevel(0);
277  
278 // To change the level for individual repositories, uncomment and replicate
279 // the required line below (replacing 'myrep' for the name of the repository to be changed).
280 // Use the convention 'groupname.myrep' if your repository is in a group.
281  
282 // $config->setMinDownloadLevel(2, 'myrep');
283  
284 // Finally, you may add or remove certain directories (and their contents) either globally
285 // or on a per repository basis. Uncomment and copy the following lines as necessary. Note
286 // that the these are searched in the order than you give them until a match is made (with the
287 // exception that all the per repository exceptions are tested before the global ones). This means
288 // that you must disallow /a/b/c/ before you allow /a/b/ otherwise the allowed match on /a/b/ will
289 // stop any further searching, thereby allowing downloads on /a/b/c/.
290  
291 // Global exceptions possibilties:
292 //
293 // $config->addAllowedDownloadException('/path/to/allowed/directory/');
294 // $config->addDisAllowedDownloadException('/path/to/disallowed/directory/');
295 //
296 // Per repository exception possibilties:
297 // Use the convention 'groupname.myrep' if your repository is in a group.
298 //
299 // $config->addAllowedDownloadException('/path/to/allowed/directory/', 'myrep');
300 // $config->addDisAllowedDownloadException('/path/to/disallowed/directory/', 'myrep');
301  
302 // }}}
303  
304 // {{{ COLOURISATION ---
305  
306 // Uncomment this line if you want to use Enscript to colourise your file listings
307 //
308 // You'll need Enscript version 1.6 or higher AND Sed installed to use this feature.
309 // Set the path above.
310 //
311 // $config->useEnscript();
312  
313 // Enscript need to be told what the contents of a file are so that it can be colourised
314 // correctly. WebSVN includes a predefined list of mappings from file extension to Enscript
315 // file type (viewable in setup.inc).
316 //
317 // Here you should add and other extensions not already listed or redefine the default ones. eg:
318 //
319 // $extEnscript['.pas'] = 'pascal';
320 //
321 // Note that extensions are case sensitive.
322  
323 // }}}
324  
325 // {{{ RSSFEED ---
326  
327 // Uncomment this line if you wish to hide the RSS feed links across all repositories
328 //
329 // $config->hideRSS();
330 //
331 // To change the global option for individual repositories, uncomment and replicate
332 // the required line below (replacing 'myrep' for the name of the repository to be changed).
333 // Use the convention 'groupname.myrep' if your repository is in a group.
334  
335 // $config->hideRSS('myrep'); // Specifically hide RSS links for 'myrep'
336 // $config->showRSS('myrep'); // Specifically show RSS links for 'myrep'
337  
338 // }}}
339  
340 // {{{ BUGTRAQ ---
341  
342 // Uncomment this line if you wish to use bugtraq: properties to show links to your BugTracker
343 // from the log messages.
344 //
345 // $config->useBugtraqProperties();
346 //
347 // To change the global option for individual repositories, uncomment and replicate
348 // the required line below (replacing 'myrep' for the name of the repository to be changed).
349 // Use the convention 'groupname.myrep' if your repository is in a group.
350  
351 // $config->useBugtraqProperties('myrep'); // Specifically use bugtraq properties for 'myrep'
352 // $config->ignoreBugtraqProperties('myrep'); // Specifically ignore bugtraq properties for 'myrep'
353  
354 // }}}
355  
356 // {{{ MISCELLANEOUS ---
357  
358 // Comment out this if you don't have the right to use it. Be warned that you may need it however!
359 set_time_limit(0);
360  
361 // Comment this line to turn off caching of repo information. This will slow down your browsing.
362 $config->setCachingOn();
363  
364 // Number of spaces to expand tabs to in diff/listing view across all repositories
365  
366 $config->expandTabsBy(8);
367  
368 // To change the global option for individual repositories, uncomment and replicate
369 // the required line below (replacing 'myrep' for the name of the repository to be changed).
370 // Use the convention 'groupname.myrep' if your repository is in a group.
371  
372 // $config->expandTabsBy(3, 'myrep'); // Expand Tabs by 3 for repository 'myrep'
373  
374 // For installations without PHP5, a copy of PEAR's PHP Compat library is included.
375 // If you have your own version of Compat you wish to use, go ahead and specify here.
376  
377 // $config->setPHPCompatPath('/usr/share/php/PHP/');
378  
379 // }}}
380 ?>