Rev Author Line No. Line
2978 kaklik 1 #define VERSION "0.1"
2 #define ID "$Id: main.c 2916 2013-04-14 17:42:03Z kaklik $"
2917 jacho 3  
2948 kaklik 4 #include "main.h"
2917 jacho 5  
2978 kaklik 6 #use i2c(master, sda=PIN_B0, scl=PIN_B1)
2917 jacho 7 #use rs232(baud=9600,parity=N,xmit=PIN_B3,rcv=PIN_B2,bits=8) //rcv TXD xmit RXD
8  
9 #define MPL3115_ADDR_R 0xC1 //addresa pro cteni
10 #define MPL3115_ADDR_W 0xC0
11  
12  
13 void mpl3115_setA (void) //nastavení pro výšku
14 {
15  
16  
17 i2c_start(); //STANDBY mode
18 I2C_Write(MPL3115_ADDR_W);
19 I2C_write(0x26);
20 I2C_write(0xB8);
21 i2c_stop();
22  
23 i2c_start(); //PT_DATA_CFG set
24 I2C_Write(MPL3115_ADDR_W);
25 I2C_write(0x13);
26 I2C_write(0x07); //hodnota
27 i2c_stop();
28  
29 i2c_start(); //ACTIVE mode
30 I2C_Write(MPL3115_ADDR_W);
31 I2C_write(0x26);
32 I2C_write(0xB9);
33 i2c_stop();
34 }
35  
36 void mpl3115_setP (void) //nastavení pro tlak
37 {
38  
39  
40 i2c_start(); //STANDBY mode
41 I2C_Write(MPL3115_ADDR_W);
42 I2C_write(0x26);
43 I2C_write(0xB8);
44 i2c_stop();
45  
46 i2c_start(); //PT_DATA_CFG set
47 I2C_Write(MPL3115_ADDR_W);
48 I2C_write(0x13);
49 I2C_write(0x07); //hodnota
50 i2c_stop();
51  
52 i2c_start(); //ACTIVE mode
53 I2C_Write(MPL3115_ADDR_W);
54 I2C_write(0x26);
55 I2C_write(0x39);
56 i2c_stop();
57 }
58  
59  
60 byte mpl3115_read (byte reg)
61 {
62 byte i;
63  
64 i2c_start();
65 I2C_Write(MPL3115_ADDR_W);
66 I2C_write(reg);
67 i2c_start();
68 I2C_Write(MPL3115_ADDR_R);
69 i=i2c_read(0);
70 i2c_stop();
71  
72 return i;
73 }
74  
75  
76 float mpl3115_T (void) //teplota ve stupnich
77 {
78 int m;
79 float l, t;
80  
2978 kaklik 81 m = mpl3115_read (0x04);
82 l = (float)(mpl3115_read(0x05)>>4)/16.0;
2917 jacho 83 t = (float)(M + L);
84 return t;
85 }
86  
87 float mpl3115_A (void) //vyska v m
88 {
89  
90 int16 m, c;
91 float l, a;
92  
2978 kaklik 93 m = mpl3115_read (0x01);
94 c = mpl3115_read (0x02);
95 l = (float)(mpl3115_read(0x03)>>4)/16.0;
2917 jacho 96 a = (float)((m << 8)|c) + l;
97 return a;
98 }
99  
100  
101 float mpl3115_P (void) //tlak v Pa
102 {
103 unsigned int32 m;
104 unsigned int16 c;
105 unsigned int l;
106 float p, l1;
107  
2978 kaklik 108 m = mpl3115_read (0x01);
109 c = mpl3115_read (0x02);
110 l = mpl3115_read(0x03);
2917 jacho 111  
112 l1= (float)(l>>4)/4.0;
113 p = (float)((m << 10)|(c<<2)|(l>>6)) + l1;
114  
115 return p;
116 }
117  
118 void main()
119 {
120  
121 float p, t, a;
122 printf("Tlakomer nebo vyskomer \r\n",);
123  
124 while(TRUE)
125 {
126 mpl3115_setP(); //nastaveni pro tlak a teplotu
127 delay_ms (500);
128 t=mpl3115_T();
129 p=mpl3115_P();
130  
131 mpl3115_setA(); //nastaveni pro vysku a teplotu
132 delay_ms (500);
133 a=mpl3115_A();
134  
135  
2978 kaklik 136 printf("Teplota: %1.4f\r\n", t);
2917 jacho 137 printf("Tlak: %10.4f(Pa)\r\n", p);
138 printf("Výška: %10.4f(m)\r\n", a);
139  
2978 kaklik 140 delay_ms (1000);
141 }
2917 jacho 142 }
143  
144