16,13 → 16,13 |
#FUSES NOWRTD //Data EEPROM not write protected |
#FUSES IESO //Internal External Switch Over mode enabled |
#FUSES FCMEN //Fail-safe clock monitor enabled |
#FUSES PBADEN //PORTB pins are configured as analog input channels on RESET |
#FUSES NOPBADEN //PORTB pins are configured as analog input channels on RESET |
#FUSES NOWRTC //configuration not registers write protected |
#FUSES NOWRTB //Boot block not write protected |
#FUSES NOEBTR //Memory not protected from table reads |
#FUSES NOEBTRB //Boot block not protected from table reads |
#FUSES NOCPB //No Boot Block code protection |
#FUSES MCLR //Master Clear pin enabled |
#FUSES NOMCLR //Master Clear pin disabled |
#FUSES LPT1OSC //Timer1 configured for low-power operation |
#FUSES NOXINST //Extended set extension and Indexed Addressing mode disabled (Legacy mode) |
#FUSES PLL5 //Divide By 5(48MHz oscillator input) |
33,5 → 33,4 |
|
#use delay(clock=48000000) |
#use rs232(baud=9600,parity=N,xmit=PIN_C6,rcv=PIN_C7,bits=8) |
#use rs232(baud=9600,parity=N,xmit=PIN_C6,rcv=PIN_C7,bits=8) |
|