/Modules/Mechanical/WINDGAUGE01A/CAD/stator2.scad
5,6 → 5,7
vyska_rotoru2=5;
prumer_sroubu=3.2;
prumer_hlavy_sroubu=6;
vyska_hlavy_sroubu=4;
vyska_matky=3;
sirka_matky=6;
prumer_orechu=10;
26,7 → 27,7
 
//stator3
stator3_sila_steny=2;
stator3_vzdalenost_od_steny=2; //definuje vzdalenost hlavy sroubu od steny statrou 4
stator3_vzdalenost_od_steny=1; //definuje vzdalenost hlavy sroubu od steny statrou 4
 
vule1=2; //vůle mezi statorem a rotorem ze strany
 
83,17 → 84,30
//otvory pro uchyceni senzoru
//otvor pro sroub 1
rotate(a=[0,0,0])
translate([(vzdalenost_der_x/2),-vzdalenost_der_y/2,0])
 
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_sroubu/2, center = true, $fn=100);
 
//otvor pro sroub 1
translate([(vzdalenost_der_x/2),-vzdalenost_der_y/2,(lozisko_vyska+sila_pod_loziskem-vyska_hlavy_sroubu)/2])
 
cylinder (h = vyska_hlavy_sroubu+0.1, r=prumer_hlavy_sroubu/2, center = true, $fn=100);
 
 
 
//otvor pro sroub 2
rotate(a=[0,0,0])
translate([(-vzdalenost_der_x/2),-vzdalenost_der_y/2,0])
 
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_sroubu/2, center = true, $fn=100);
 
translate([(-vzdalenost_der_x/2),-vzdalenost_der_y/2,(lozisko_vyska+sila_pod_loziskem-vyska_hlavy_sroubu)/2])
 
cylinder (h = vyska_hlavy_sroubu+0.1, r=prumer_hlavy_sroubu/2, center = true, $fn=100);
 
 
 
 
//otvor pro sroub 1
rotate(a=[0,0,0])
translate([(vzdalenost_der_x/2),vzdalenost_der_y/2,0])
100,6 → 114,11
 
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_sroubu/2, center = true, $fn=100);
 
translate([(vzdalenost_der_x/2),vzdalenost_der_y/2,(lozisko_vyska+sila_pod_loziskem-vyska_hlavy_sroubu)/2])
 
cylinder (h = vyska_hlavy_sroubu+0.1, r=prumer_hlavy_sroubu/2, center = true, $fn=100);
 
 
//otvor pro sroub 1
rotate(a=[0,0,0])
translate([(-vzdalenost_der_x/2),vzdalenost_der_y/2,0])
106,7 → 125,9
 
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_sroubu/2, center = true, $fn=100);
 
translate([(-vzdalenost_der_x/2),vzdalenost_der_y/2,(lozisko_vyska+sila_pod_loziskem-vyska_hlavy_sroubu)/2])
 
cylinder (h = vyska_hlavy_sroubu+0.1, r=prumer_hlavy_sroubu/2, center = true, $fn=100);
 
 
 
116,9 → 137,19
//otvory pro uchyceni stator 3
//otvor pro sroub 1
translate([0,(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,0])
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=3, center = true, $fn=100);
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_sroubu/2, center = true, $fn=100);
 
translate([0,(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,2])
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_hlavy_sroubu/2, center = true, $fn=100);
 
//otvor pro sroub 2
translate([0,-(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,0])
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_sroubu/2, center = true, $fn=100);
 
translate([0,-(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,2])
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_hlavy_sroubu/2, center = true, $fn=100);
 
 
}
 
 
/Modules/Mechanical/WINDGAUGE01A/CAD/stator3.scad
0,0 → 1,114
$fn=40; // model faces resolution.
 
prumer_rotoru1=60;
vyska_rotoru1=5;
vyska_rotoru2=5;
prumer_sroubu=3.2;
prumer_hlavy_sroubu=6;
vyska_hlavy_sroubu=4;
vyska_matky=3;
sirka_matky=6;
prumer_orechu=10;
sila_materialu=2;
sila_materialu_vule=0.2;
hloubka_prekryti=2;
 
//lozisko
lozisko_prumer_vnitrni=5;
lozisko_prumer_vnejsi=16;
lozisko_vyska=5;
lozisko_prekryv=1.5;
 
//stator1
stator1_sila=2;
 
//stator2
sila_pod_loziskem=1;
 
//stator3
stator3_sila_steny=2;
stator3_vzdalenost_od_steny=1; //definuje vzdalenost hlavy sroubu od steny statrou 4
stator3_vyska=60;
stator3_vyska_prekryti=5;
 
vule1=1; //vůle mezi statorem a rotorem ze strany
 
//nastevní rotoru2
vyska_kryti=5;
 
//lopatka
hloubka_uchytu=20;
sila_uchytu=12;
vyska_uchytu=10;
tolerance_uchytu=0.1;
 
//parametry uchytu senzoru
roztec_der=10.16;
vzdalenost_der_x=2*roztec_der;
vzdalenost_der_y=1*roztec_der;
 
 
 
 
 
 
 
difference()
{
cylinder (h = stator3_vyska, r=(prumer_rotoru1)/2, center = true, $fn=100);
translate([0,0,(stator3_vyska-lozisko_vyska-sila_pod_loziskem)/2])
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=(prumer_rotoru1-2*sila_materialu-2*vule1-stator3_sila_steny)/2, center = true, $fn=100);
 
cylinder (h = stator3_vyska+0.1, r=(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny)/2, center = true, $fn=100);
translate([0,0,(stator3_vyska-stator3_vyska_prekryti)/2])
difference()
{
cylinder (h = stator3_vyska_prekryti+0.1, r=(prumer_rotoru1+0.1)/2, center = true, $fn=100);
cylinder (h = stator3_vyska_prekryti+0.1, r=(prumer_rotoru1-2*sila_materialu-2*vule1)/2, center = true, $fn=100);
}
 
 
 
 
 
 
//otvory pro uchyceni stator 3
//otvor pro sroub 1
translate([0,(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,0])
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_sroubu/2, center = true, $fn=100);
 
translate([0,(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,2])
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_hlavy_sroubu/2, center = true, $fn=100);
 
//otvor pro sroub 2
translate([0,-(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,0])
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_sroubu/2, center = true, $fn=100);
 
translate([0,-(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,2])
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_hlavy_sroubu/2, center = true, $fn=100);
 
 
}