/Designs/HAM Constructions/SDRX02B/HDL/modules/sychro1/clock_divider.vhd/clock_divider.vhd
0,0 → 1,68
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
 
library UNISIM;
use UNISIM.vcomponents.all;
 
entity clock_divider is
generic (
G_DIVISOR : positive := 2
);
port (
i_clk : in std_logic;
i_rst : in std_logic;
o_clk : out std_logic
);
end entity clock_divider;
 
architecture behavioral of clock_divider is
 
subtype t_counter is natural range 0 to ( G_DIVISOR - 1 );
signal s_counter : t_counter := 0;
 
constant C_COUNTER : t_counter := G_DIVISOR / 2 - 1;
 
signal s_clk_divided : std_logic;
attribute clock_signal : string;
attribute clock_signal of s_clk_divided : signal is "yes";
 
begin
 
assert ( G_DIVISOR > 1 ) report "The divisor should be greater than 1" severity failure;
counting : process( i_clk )
begin
if( rising_edge(i_clk) ) then
if( i_rst = '1' ) then
s_counter <= 0;
s_clk_divided <= '0';
else
if( s_counter = t_counter'high ) then
s_counter <= 0;
s_clk_divided <= '0';
else
s_counter <= s_counter + 1;
if( s_counter = C_COUNTER ) then
s_clk_divided <= '1';
end if;
end if;
end if;
end if;
end process counting;
BUFR_inst : BUFR
generic map (
BUFR_DIVIDE => "BYPASS", -- "BYPASS", "1", "2", "3", "4", "5", "6", "7", "8"
SIM_DEVICE => "VIRTEX6") -- Specify target device, "VIRTEX4", "VIRTEX5", "VIRTEX6"
port map (
O => o_clk, -- Clock buffer output
CE => '1', -- Clock enable input
CLR => '0', -- Clock buffer reset input
I => s_clk_divided -- Clock buffer input
);
end architecture;