No changes between revisions
/Designs/LABduino/SW/demos/Blink/Blink.pde
0,0 → 1,29
/**
* Blink the Wiring board LED
* by BARRAGAN http://barraganstudio.com
*
* turns on and off the Wiring board LED, with
* intervals of 1 second (1000 milliseconds).
* For the Wiring boards v1 the on-board LED is on pin 48,
* on Wiring S the on-board LED is on pin 15.
* it is also possible to use the WLED constant with the
* digitalWrite command: digitalWrite(WLED, HIGH). WLED will be the
* correct pin in the current board selected in the
* Tools -> Board menu.
*/
 
// blinks the board LED, use 48 for Wiring 1.0 boards, use pin 15
// for Wiring S
 
void setup()
{
pinMode(2, OUTPUT); // set pin as output
}
 
void loop()
{
digitalWrite(2, HIGH); // set the LED on
delay(1000); // wait for a second
digitalWrite(2, LOW); // set the LED off
delay(1000); // wait for a second
}
/Designs/LABduino/SW/demos/Blink/build/Blink.cpp
0,0 → 1,33
/**
* Blink the Wiring board LED
* by BARRAGAN http://barraganstudio.com
*
* turns on and off the Wiring board LED, with
* intervals of 1 second (1000 milliseconds).
* For the Wiring boards v1 the on-board LED is on pin 48,
* on Wiring S the on-board LED is on pin 15.
* it is also possible to use the WLED constant with the
* digitalWrite command: digitalWrite(WLED, HIGH). WLED will be the
* correct pin in the current board selected in the
* Tools -> Board menu.
*/
 
// blinks the board LED, use 48 for Wiring 1.0 boards, use pin 15
// for Wiring S
 
#include "WProgram.h"
void setup();
void loop();
void setup()
{
pinMode(2, OUTPUT); // set pin as output
}
 
void loop()
{
digitalWrite(2, HIGH); // set the LED on
delay(1000); // wait for a second
digitalWrite(2, LOW); // set the LED off
delay(1000); // wait for a second
}
 
/Designs/LABduino/SW/demos/Blink/build/Blink.cpp.eep
0,0 → 1,0
:00000001FF
/Designs/LABduino/SW/demos/Blink/build/Blink.cpp.elf
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Property changes:
Added: svn:mime-type
+application/octet-stream
\ No newline at end of property
/Designs/LABduino/SW/demos/Blink/build/Blink.cpp.hex
0,0 → 1,129
:100000000C9435000C945D000C945D000C945D0024
:100010000C945D000C945D000C945D000C947A01CE
:100020000C94A3010C94CC010C9470020C94F50177
:100030000C941E020C9447020C94FF000C942801AF
:100040000C9451010C945D000C945D000C945D00C7
:100050000C945D000C945D000C945D000C945D00AC
:100060000C945D000C945D00E20311241FBECFEFE1
:10007000D8E0DEBFCDBF11E0A0E0B1E0E4EFF7E0F3
:1000800002C005900D92A030B107D9F711E0A0E0B1
:10009000B1E001C01D92AF36B107E1F710E0CAE64A
:1000A000D0E004C02297FE010E94F403C836D107B5
:1000B000C9F70E94CD000C94F8030C940000529AEA
:1000C00008955A9A68EE73E080E090E00E94A300E1
:1000D0005A9868EE73E080E090E00E94A3000895D3
:1000E0008091040190910501A0910601B091070152
:1000F000309108010196A11DB11D232F2D5F2D37D1
:1001000020F02D570196A11DB11D20930801809369
:10011000040190930501A0930601B093070180911B
:10012000000190910101A0910201B091030101969B
:10013000A11DB11D8093000190930101A0930201C4
:10014000B09303010895EF92FF920F931F937B01E9
:100150008C018FB7F8944091040150910501609192
:100160000601709107018FBF2FB7F89480910401A9
:1001700090910501A0910601B09107012FBF841B4A
:10018000950BA60BB70B8E159F05A007B10760F363
:100190001F910F91FF90EF9008950E94D4000E944C
:1001A0005F000E946100FDCF0F931F9309E011E0F3
:1001B000C80163E00E94C903C80160E040E750E065
:1001C00021E00E949E03C80164E00E9499020BE2B4
:1001D00011E0C80161E00E94C903C80164E00E9407
:1001E00099020DE411E0C80161E00E94C903C80151
:1001F00064E00E94990278941F910F9108951F92D4
:100200000F920FB60F9211242F933F934F935F934A
:100210006F937F938F939F93AF93BF93EF93FF93CE
:10022000E0912301F0912401309709F00995FF91A5
:10023000EF91BF91AF919F918F917F916F915F915E
:100240004F913F912F910F900FBE0F901F901895D7
:100250001F920F920FB60F9211242F933F934F933B
:100260005F936F937F938F939F93AF93BF93EF931E
:10027000FF93E0912501F0912601309709F009954F
:10028000FF91EF91BF91AF919F918F917F916F916E
:100290005F914F913F912F910F900FBE0F901F9044
:1002A00018951F920F920FB60F9211242F933F9320
:1002B0004F935F936F937F938F939F93AF93BF936E
:1002C000EF93FF93E0912101F0912201309709F023
:1002D0000995FF91EF91BF91AF919F918F917F9180
:1002E0006F915F914F913F912F910F900FBE0F90A3
:1002F0001F9018951F920F920FB60F9211242F93F3
:100300003F934F935F936F937F938F939F93AF939D
:10031000BF93EF93FF93E0916701F09168013097ED
:1003200009F00995FF91EF91BF91AF919F918F9146
:100330007F916F915F914F913F912F910F900FBEE1
:100340000F901F9018951F920F920FB60F921124C5
:100350002F933F934F935F936F937F938F939F93CD
:10036000AF93BF93EF93FF93E0916901F0916A011E
:10037000309709F00995FF91EF91BF91AF919F914F
:100380008F917F916F915F914F913F912F910F903E
:100390000FBE0F901F9018951F920F920FB60F92DD
:1003A00011242F933F934F935F936F937F938F937A
:1003B0009F93AF93BF93EF93FF93E0916501F0910B
:1003C0006601309709F00995FF91EF91BF91AF91C8
:1003D0009F918F917F916F915F914F913F912F915D
:1003E0000F900FBE0F901F9018951F920F920FB68F
:1003F0000F9211242F933F934F935F936F937F93AB
:100400008F939F93AF93BF93EF93FF93E091450139
:10041000F0914601309709F00995FF91EF91BF9156
:10042000AF919F918F917F916F915F914F913F918C
:100430002F910F900FBE0F901F9018951F920F9243
:100440000FB60F9211242F933F934F935F936F93A7
:100450007F938F939F93AF93BF93EF93FF93E0911D
:100460004701F0914801309709F00995FF91EF910C
:10047000BF91AF919F918F917F916F915F914F91BC
:100480003F912F910F900FBE0F901F9018951F92C4
:100490000F920FB60F9211242F933F934F935F93B8
:1004A0006F937F938F939F93AF93BF93EF93FF933C
:1004B000E0914301F0914401309709F00995FF91D3
:1004C000EF91BF91AF919F918F917F916F915F91CC
:1004D0004F913F912F910F900FBE0F901F90189545
:1004E0001F920F920FB60F9211242F933F934F93A9
:1004F0005F936F937F938F939F93AF93BF93EF938C
:10050000FF93E0914B01F0914C01309709F0099570
:10051000FF91EF91BF91AF919F918F917F916F91DB
:100520005F914F913F912F910F900FBE0F901F90B1
:100530001895FC018081823081F4643031F165309E
:1005400028F46230E1F06330F0F40FC0663009F156
:100550006630E8F0673009F51EC06630B1F06730EC
:1005600038F4623061F0643071F06130B1F409C088
:10057000683079F0683058F0693079F40CC092E056
:100580000DC091E00BC093E009C094E007C095E076
:1005900005C096E003C097E001C090E00284F385B7
:1005A000E02D8081887F982B90830895CF93DF93EF
:1005B000EC016883613019F1613020F0623009F09C
:1005C0006CC048C01B821A8286E490E09D838C83B5
:1005D0008EE690E09F838E8384E490E099878887FD
:1005E00085E490E09B878A871D861C8687E490E0DF
:1005F0009F878E87198A188A88E490E022C08FE648
:1006000090E09F838E8385E890E09B838A8384E8D3
:1006100090E09D838C8380E890E09987888781E8CB
:1006200090E09B878A8789E890E09D878C8788E89F
:1006300090E09F878E878BE890E0998B888B8AE883
:1006400090E09B8B8A8B1D8A1C8A1F8A1E8A82E0FF
:10065000898323C01B821A8282EB90E09D838C8366
:1006600080E790E09F838E8380EB90E09987888776
:1006700081EB90E09B878A871D861C8683EB90E048
:100680009F878E87198A188A84EB90E09B8B8A8BD0
:100690001D8A1C8A1F8A1E8A6983CE0160E00E941F
:1006A0009902EA81FB81309709F01082EC81FD818B
:1006B0001082198E188E1B8E1A8E1D8E1C8E1F8E08
:1006C0001E8E19A218A2DF91CF910895FC0162300D
:1006D00071F0633028F4662381F0613071F505C054
:1006E000633039F0643049F506C081E007C082E02C
:1006F00005C083E003C085E001C080E00680F7818B
:10070000E02D2081682F772767FD709581E090E0CC
:10071000062E02C0880F991F0A94E2F78095822363
:1007200020E030E0442311F021E030E002C0220F4D
:10073000331F6A95E2F7822B80830895FC016230B3
:1007400091F0633028F4662341F06130A1F408C0D1
:10075000633061F0643079F40CC0518F408F0BC06E
:10076000538F428F08C0558F448F05C0578F468FD7
:1007700002C051A340A3452B29F4CF0140E00E94C1
:1007800066030895222321F0CF0141E00E94660311
:100790000895CF93DF93EC01E885F9858081962F4A
:1007A00093708C7F982B9083EA85FB85808170E025
:1007B0006C707070660F771F877E862B8083DF9149
:1007C000CF91089589E091E060E00E94D6028BE22B
:1007D00091E061E00E94D6028DE491E062E00E9427
:1007E000D6020895EE0FFF1F0590F491E02D0994B5
:0407F000F894FFCFAB
:00000001FF
/Designs/LABduino/SW/demos/Blink/build/Blink.pde
0,0 → 1,29
/**
* Blink the Wiring board LED
* by BARRAGAN http://barraganstudio.com
*
* turns on and off the Wiring board LED, with
* intervals of 1 second (1000 milliseconds).
* For the Wiring boards v1 the on-board LED is on pin 48,
* on Wiring S the on-board LED is on pin 15.
* it is also possible to use the WLED constant with the
* digitalWrite command: digitalWrite(WLED, HIGH). WLED will be the
* correct pin in the current board selected in the
* Tools -> Board menu.
*/
 
// blinks the board LED, use 48 for Wiring 1.0 boards, use pin 15
// for Wiring S
 
void setup()
{
pinMode(2, OUTPUT); // set pin as output
}
 
void loop()
{
digitalWrite(2, HIGH); // set the LED on
delay(1000); // wait for a second
digitalWrite(2, LOW); // set the LED off
delay(1000); // wait for a second
}