0,0 → 1,31 |
***************************************************************************** |
** ChibiOS/RT port for ARM-Cortex-M3 STM32L152. ** |
***************************************************************************** |
|
** TARGET ** |
|
The demo runs on an ST STM32L-Discovery board. |
|
** The Demo ** |
|
The demo shows how to use the ADC, PWM and SPI drivers using asynchronous |
APIs. The ADC samples two channels (temperature sensor and PC0) and modulates |
the PWM using the sampled values. The sample data is also transmitted using |
the SPI port 2 (NSS=PB12, SCK=PB13, MISO=PB14, MOSI=PB15). |
By pressing the button located on the board the test procedure is activated |
with output on the serial port COM1 (USART1). |
|
** Build Procedure ** |
|
The demo has been tested by using the free Codesourcery GCC-based toolchain |
and YAGARTO. just modify the TRGT line in the makefile in order to use |
different GCC toolchains. |
|
** Notes ** |
|
Some files used by the demo are not part of ChibiOS/RT but are copyright of |
ST Microelectronics and are licensed under a different license. |
Also note that not all the files present in the ST library are distributed |
with ChibiOS/RT, you can find the whole library on the ST web site: |
|
http://www.st.com |