| 1,5 → 1,11 |
|---|
| /**** Automatic weather station 01A ****/ |
| #define VERSION "0.1" |
| #define ID "$Id: irmrak4.c 2177 2011-09-05 18:56:16Z kaklik $" |
| #include "main.h" |
| #include <string.h> |
| |
| #CASE // Case sensitive compiler |
| |
| #define LCD_ENABLE_PIN PIN_E0 //// |
| #define LCD_RS_PIN PIN_E1 //// |
| #define LCD_RW_PIN PIN_E2 //// |
| 9,11 → 15,35 |
|---|
| #define LCD_DATA7 PIN_D7 |
| #include <lcd.c> |
| |
| #define SEND_DELAY 50 // Time between two characters on RS232 |
| |
| char VER[4]=VERSION; // Buffer for concatenate of a version string |
| |
| #define ONE_WIRE_PIN PIN_C7 |
| #include "..\ds1820.c" |
| |
| void welcome(void) // Welcome message |
| { |
| char REV[50]=ID; // Buffer for concatenate of a version string |
| |
| if (REV[strlen(REV)-1]=='$') REV[strlen(REV)-1]=0; |
| printf("\r\n\r\n# Mrakomer %s (C) 2011 UST\r\n",VER); // Welcome message |
| printf("#%s\r\n",&REV[4]); |
| // printf("#\r\n"); |
| // printf("# commands: h, c, o, l, x, i, r, a, s, u\r\n"); |
| // printf("# h_eat, c_old, o_pen, l_ock, x_open, "); |
| // printf("i_nfo, r_epeat, a_uto, s_single, u_pdate\r\n"); |
| // printf("#\r\n"); |
| // printf("# ver seq in[1/100 C] sky[1/100 C] sky[1/100 C] "); |
| // printf("out[1/100 C] heat[s] dome[s] check\r\n\r\n"); |
| |
| //---WDT |
| restart_wdt(); |
| } |
| |
| void main() |
| { |
| unsigned int16 seq=0; |
| |
| setup_adc_ports(NO_ANALOGS|VSS_VDD); |
| setup_adc(ADC_CLOCK_DIV_2); |
| 30,6 → 60,8 |
|---|
| printf("(c) Kaklik 2013\r\n"); |
| printf("www.mlab.cz\r\n"); |
| |
| welcome(); |
| |
| /* lcd_init(); |
| lcd_putc("(c) Kaklik 2013"); |
| lcd_gotoxy(3,2); |
| 40,8 → 72,34 |
|---|
| { |
| lcd_gotoxy(1,2); |
| // printf(lcd_putc,"T: %f K ",ds1820_read()+273.15); |
| printf("$T1.0 %f \r\n",ds1820_read()+273.15); |
| Delay_ms(100); |
| |
| // printf("$T1.0 %f \r\n",ds1820_read()+273.15); |
| delay_ms(100); |
| { // printf |
| char output[8]; // Output buffer |
| int8 j; // String pointer |
| int8 check=0; // Checksum is calculated between '$' and '*' |
| |
| delay_us(SEND_DELAY); |
| putc('$'); |
| delay_us(SEND_DELAY); |
| sprintf(output,"AWS%s \0",VER); |
| j=0; while(output[j]!=0) { delay_us(SEND_DELAY); putc(output[j]); check^=output[j++]; } |
| sprintf(output,"%Lu \0", seq); |
| j=0; while(output[j]!=0) { delay_us(SEND_DELAY); putc(output[j]); check^=output[j++]; } |
| sprintf(output,"%f \0", ds1820_read()+273.15); |
| j=0; while(output[j]!=0) { delay_us(SEND_DELAY); putc(output[j]); check^=output[j++]; } |
| sprintf(output,"*%X\r\n\0", check); |
| j=0; while(output[j]!=0) { delay_us(SEND_DELAY); putc(output[j++]); } |
| delay_us(SEND_DELAY); |
| } |
| |
| //---WDT |
| restart_wdt(); |
| seq++; // Increment the number of measurement |
| |
| } |
| |
| } |
| |
| //#include "dbloader.c" // Space reservation for the BootLoader |