Problem with comparison.
/Designs/Measuring_instruments/AtomicCounter/VHDL/AtomicCounter.ipf
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Property changes:
Added: svn:mime-type
+application/octet-stream
\ No newline at end of property
/Designs/Measuring_instruments/AtomicCounter/VHDL/AtomicCounter.prj
0,0 → 1,0
vhdl work "src/AtomicCounter.vhd"
/Designs/Measuring_instruments/AtomicCounter/VHDL/AtomicCounter.xise
0,0 → 1,346
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
 
<header>
<!-- ISE source project file created by Project Navigator. -->
<!-- -->
<!-- This file contains project source information including a list of -->
<!-- project source files, project and process properties. This file, -->
<!-- along with the project source files, is sufficient to open and -->
<!-- implement in ISE Project Navigator. -->
<!-- -->
<!-- Copyright (c) 1995-2013 Xilinx, Inc. All rights reserved. -->
</header>
 
<version xil_pn:ise_version="14.6" xil_pn:schema_version="2"/>
 
<files>
<file xil_pn:name="src/S3AN01B.ucf" xil_pn:type="FILE_UCF">
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="src/AtomicCounter.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="3"/>
<association xil_pn:name="Implementation" xil_pn:seqID="1"/>
</file>
</files>
 
<autoManagedFiles>
<!-- The following files are identified by `include statements in verilog -->
<!-- source files and are automatically managed by Project Navigator. -->
<!-- -->
<!-- Do not hand-edit this section, as it will be overwritten when the -->
<!-- project is analyzed based on files automatically identified as -->
<!-- include files. -->
</autoManagedFiles>
 
<properties>
<property xil_pn:name="Add I/O Buffers" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Logic Optimization Across Hierarchy" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow SelectMAP Pins to Persist" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Unexpanded Blocks" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Unmatched LOC Constraints" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Unmatched Timing Group Constraints" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Asynchronous To Synchronous" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Auto Implementation Compile Order" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Auto Implementation Top" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Automatic BRAM Packing" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Automatically Insert glbl Module in the Netlist" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Automatically Run Generate Target PROM/ACE File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="BRAM Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Bring Out Global Set/Reset Net as a Port" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Bring Out Global Tristate Net as a Port" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Bus Delimiter" xil_pn:value="&lt;>" xil_pn:valueState="default"/>
<property xil_pn:name="CLB Pack Factor Percentage" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Case" xil_pn:value="Maintain" xil_pn:valueState="default"/>
<property xil_pn:name="Case Implementation Style" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Change Device Speed To" xil_pn:value="-5" xil_pn:valueState="default"/>
<property xil_pn:name="Change Device Speed To Post Trace" xil_pn:value="-5" xil_pn:valueState="default"/>
<property xil_pn:name="Combinatorial Logic Optimization" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Compile EDK Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Compile SIMPRIM (Timing) Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Compile UNISIM (Functional) Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Compile XilinxCoreLib (CORE Generator) Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Compile for HDL Debugging" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin Done" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin Program" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Rate" xil_pn:value="25" xil_pn:valueState="default"/>
<property xil_pn:name="Correlate Output to Input Design" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create ASCII Configuration File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Binary Configuration File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Bit File" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Create I/O Pads from Ports" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create IEEE 1532 Configuration File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Logic Allocation File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Mask File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create ReadBack Data Files" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Cross Clock Analysis" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Decoder Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Delay Values To Be Read from SDF" xil_pn:value="Setup Time" xil_pn:valueState="default"/>
<property xil_pn:name="Device" xil_pn:value="xc3s50an" xil_pn:valueState="non-default"/>
<property xil_pn:name="Device Family" xil_pn:value="Spartan3A and Spartan3AN" xil_pn:valueState="non-default"/>
<property xil_pn:name="Device Speed Grade/Select ABS Minimum" xil_pn:value="-5" xil_pn:valueState="default"/>
<property xil_pn:name="Do Not Escape Signal and Instance Names in Netlist" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Done (Output Events)" xil_pn:value="Default (4)" xil_pn:valueState="default"/>
<property xil_pn:name="Drive Awake Pin During Suspend/Wake Sequence" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Drive Done Pin High" xil_pn:value="true" xil_pn:valueState="non-default"/>
<property xil_pn:name="Dummy Driver for Enable Filter on Suspend Input" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable BitStream Compression" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Cyclic Redundancy Checking (CRC)" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Debugging of Serial Mode BitStream" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Filter on Suspend Input" xil_pn:value="Please use the ENABLE_SUSPEND implementation constraint." xil_pn:valueState="default"/>
<property xil_pn:name="Enable Hardware Co-Simulation" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Internal Done Pipe" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Message Filtering" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Outputs (Output Events)" xil_pn:value="Default (5)" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Power-On Reset Detection" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Suspend/Wake Global Set/Reset" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Equivalent Register Removal XST" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Evaluation Development Board" xil_pn:value="None Specified" xil_pn:valueState="default"/>
<property xil_pn:name="Exclude Compilation of Deprecated EDK Cores" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Exclude Compilation of EDK Sub-Libraries" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Extra Effort" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Extra Effort (Highest PAR level only)" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="FPGA Start-Up Clock" xil_pn:value="CCLK" xil_pn:valueState="default"/>
<property xil_pn:name="FSM Encoding Algorithm" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="FSM Style" xil_pn:value="LUT" xil_pn:valueState="default"/>
<property xil_pn:name="Filter Files From Compile Order" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Flatten Output Netlist" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Functional Model Target Language ArchWiz" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="Functional Model Target Language Coregen" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="Functional Model Target Language Schematic" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="GTS Cycle During Suspend/Wakeup Sequence" xil_pn:value="4" xil_pn:valueState="default"/>
<property xil_pn:name="GWE Cycle During Suspend/Wakeup Sequence" xil_pn:value="5" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Architecture Only (No Entity Declaration)" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Asynchronous Delay Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Clock Region Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Constraints Interaction Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Constraints Interaction Report Post Trace" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Datasheet Section" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Datasheet Section Post Trace" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Detailed MAP Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Multiple Hierarchical Netlist Files" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Post-Place &amp; Route Power Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Post-Place &amp; Route Simulation Model" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate RTL Schematic" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Generate SAIF File for Power Optimization/Estimation Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Testbench File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Timegroups Section" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Timegroups Section Post Trace" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generics, Parameters" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Global Optimization Goal" xil_pn:value="AllClockNets" xil_pn:valueState="default"/>
<property xil_pn:name="Global Set/Reset Port Name" xil_pn:value="GSR_PORT" xil_pn:valueState="default"/>
<property xil_pn:name="Global Tristate Port Name" xil_pn:value="GTS_PORT" xil_pn:valueState="default"/>
<property xil_pn:name="Hierarchy Separator" xil_pn:value="/" xil_pn:valueState="default"/>
<property xil_pn:name="ISim UUT Instance Name" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Ignore User Timing Constraints Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Ignore User Timing Constraints Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Implementation Top" xil_pn:value="Architecture|AtomicCounter|AtomicCounter_a" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top File" xil_pn:value="src/AtomicCounter.vhd" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top Instance Path" xil_pn:value="/AtomicCounter" xil_pn:valueState="non-default"/>
<property xil_pn:name="Include 'uselib Directive in Verilog File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Include SIMPRIM Models in Verilog File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Include UNISIM Models in Verilog File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Include sdf_annotate task in Verilog File" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Incremental Compilation" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Insert Buffers to Prevent Pulse Swallowing" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Instantiation Template Target Language Xps" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TCK" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TDI" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TDO" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TMS" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Keep Hierarchy" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Language" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="Last Applied Goal" xil_pn:value="Balanced" xil_pn:valueState="default"/>
<property xil_pn:name="Last Applied Strategy" xil_pn:value="Xilinx Default (unlocked)" xil_pn:valueState="default"/>
<property xil_pn:name="Last Unlock Status" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Launch SDK after Export" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Library for Verilog Sources" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Load glbl" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Logical Shifter Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Manual Implementation Compile Order" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Map Effort Level" xil_pn:value="High" xil_pn:valueState="default"/>
<property xil_pn:name="Map Slice Logic into Unused Block RAMs" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Max Fanout" xil_pn:value="500" xil_pn:valueState="default"/>
<property xil_pn:name="Maximum Number of Lines in Report" xil_pn:value="1000" xil_pn:valueState="default"/>
<property xil_pn:name="Maximum Signal Name Length" xil_pn:value="20" xil_pn:valueState="default"/>
<property xil_pn:name="Move First Flip-Flop Stage" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Move Last Flip-Flop Stage" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Next Configuration Mode" xil_pn:value="001" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Starting Address for Next Configuration" xil_pn:value="0x00000000" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Use New Mode for Next Configuration" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Multiplier Style" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Mux Extraction" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Mux Style" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Netlist Hierarchy" xil_pn:value="As Optimized" xil_pn:valueState="default"/>
<property xil_pn:name="Netlist Translation Type" xil_pn:value="Timestamp" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Clock Buffers" xil_pn:value="24" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Paths in Error/Verbose Report" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Paths in Error/Verbose Report Post Trace" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Optimization Effort" xil_pn:value="Normal" xil_pn:valueState="default"/>
<property xil_pn:name="Optimization Goal" xil_pn:value="Speed" xil_pn:valueState="default"/>
<property xil_pn:name="Optimization Strategy (Cover Mode)" xil_pn:value="Area" xil_pn:valueState="default"/>
<property xil_pn:name="Optimize Instantiated Primitives" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Other Bitgen Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options Fit" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options Map" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options Par" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options Translate" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compxlib Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Map Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other NETGEN Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Ngdbuild Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Place &amp; Route Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Behavioral" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Post-Map" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Post-Route" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Post-Translate" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other XPWR Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other XST Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Output Extended Identifiers" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Output File Name" xil_pn:value="AtomicCounter" xil_pn:valueState="default"/>
<property xil_pn:name="Overwrite Compiled Libraries" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Pack I/O Registers into IOBs" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Pack I/O Registers/Latches into IOBs" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Package" xil_pn:value="tqg144" xil_pn:valueState="default"/>
<property xil_pn:name="Perform Advanced Analysis" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Perform Advanced Analysis Post Trace" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Perform Timing-Driven Packing and Placement" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Place &amp; Route Effort Level (Overall)" xil_pn:value="High" xil_pn:valueState="default"/>
<property xil_pn:name="Place And Route Mode" xil_pn:value="Normal Place and Route" xil_pn:valueState="default"/>
<property xil_pn:name="Place MultiBoot Settings into Bitstream" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Placer Effort Level (Overrides Overall Level)" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Port to be used" xil_pn:value="Auto - default" xil_pn:valueState="default"/>
<property xil_pn:name="Post Map Simulation Model Name" xil_pn:value="AtomicCounter_map.vhd" xil_pn:valueState="default"/>
<property xil_pn:name="Post Place &amp; Route Simulation Model Name" xil_pn:value="AtomicCounter_timesim.vhd" xil_pn:valueState="default"/>
<property xil_pn:name="Post Synthesis Simulation Model Name" xil_pn:value="AtomicCounter_synthesis.vhd" xil_pn:valueState="default"/>
<property xil_pn:name="Post Translate Simulation Model Name" xil_pn:value="AtomicCounter_translate.vhd" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Preferred Language" xil_pn:value="VHDL" xil_pn:valueState="non-default"/>
<property xil_pn:name="Priority Encoder Extraction" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Produce Verbose Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Project Description" xil_pn:value="A Counter synchronised by GPS." xil_pn:valueState="non-default"/>
<property xil_pn:name="Project Generator" xil_pn:value="ProjNav" xil_pn:valueState="default"/>
<property xil_pn:name="Property Specification in Project File" xil_pn:value="Store all values" xil_pn:valueState="default"/>
<property xil_pn:name="RAM Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="RAM Style" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="ROM Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="ROM Style" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Read Cores" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Regenerate Core" xil_pn:value="Under Current Project Setting" xil_pn:valueState="default"/>
<property xil_pn:name="Register Balancing" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Register Duplication" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Register Duplication Xst" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Release Write Enable (Output Events)" xil_pn:value="Default (6)" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Design Instance in Testbench File to" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Top Level Architecture To" xil_pn:value="Structure" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Top Level Entity to" xil_pn:value="AtomicCounter" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Top Level Module To" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Report Fastest Path(s) in Each Constraint" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Report Fastest Path(s) in Each Constraint Post Trace" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Report Paths by Endpoint" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Report Paths by Endpoint Post Trace" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Report Type" xil_pn:value="Verbose Report" xil_pn:valueState="default"/>
<property xil_pn:name="Report Type Post Trace" xil_pn:value="Verbose Report" xil_pn:valueState="default"/>
<property xil_pn:name="Report Unconstrained Paths" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Report Unconstrained Paths Post Trace" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Reset On Configuration Pulse Width" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Resource Sharing" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Retain Hierarchy" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Retry Configuration if CRC Error Occurs" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Router Effort Level (Overrides Overall Level)" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Run Design Rules Checker (DRC)" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time Map" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time Par" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time Translate" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Safe Implementation" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Security" xil_pn:value="Enable Readback and Reconfiguration" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Behavioral" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Map" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Route" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Translate" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Source Node" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Shift Register Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Show All Models" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Model Target" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time ISim" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time Map" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time Par" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time Translate" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulator" xil_pn:value="ISim (VHDL/Verilog)" xil_pn:valueState="default"/>
<property xil_pn:name="Slice Packing" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Slice Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Specify 'define Macro Name and Value" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Behavioral" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Map" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Route" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Translate" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Speed Grade" xil_pn:value="-5" xil_pn:valueState="default"/>
<property xil_pn:name="Starting Placer Cost Table (1-100) Map" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Starting Placer Cost Table (1-100) Par" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Synthesis Tool" xil_pn:value="XST (VHDL/Verilog)" xil_pn:valueState="default"/>
<property xil_pn:name="Target Simulator" xil_pn:value="Please Specify" xil_pn:valueState="default"/>
<property xil_pn:name="Timing Mode Map" xil_pn:value="Non Timing Driven" xil_pn:valueState="default"/>
<property xil_pn:name="Timing Mode Par" xil_pn:value="Performance Evaluation" xil_pn:valueState="default"/>
<property xil_pn:name="Top-Level Module Name in Output Netlist" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Top-Level Source Type" xil_pn:value="HDL" xil_pn:valueState="default"/>
<property xil_pn:name="Trim Unconnected Signals" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Tristate On Configuration Pulse Width" xil_pn:value="0" xil_pn:valueState="default"/>
<property xil_pn:name="Unused IOB Pins" xil_pn:value="Pull Down" xil_pn:valueState="default"/>
<property xil_pn:name="Use 64-bit PlanAhead on 64-bit Systems" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Use Clock Enable" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Behavioral" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Post-Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Post-Route" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Post-Translate" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Behavioral" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Translate" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Behav" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Translate" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use LOC Constraints" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Use RLOC Constraints" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Use Smart Guide" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synchronous Reset" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synchronous Set" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synthesis Constraints File" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="User Browsed Strategy Files" xil_pn:value="C:/Xilinx/13.3/ISE_DS/ISE/data/default.xds" xil_pn:valueState="non-default"/>
<property xil_pn:name="UserID Code (8 Digit Hexadecimal)" xil_pn:value="0xFFFFFFFF" xil_pn:valueState="default"/>
<property xil_pn:name="VHDL Source Analysis Standard" xil_pn:value="VHDL-200X" xil_pn:valueState="non-default"/>
<property xil_pn:name="Value Range Check" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Verilog 2001 Xst" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Verilog Macros" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Wait for DLL Lock (Output Events)" xil_pn:value="Default (NoWait)" xil_pn:valueState="default"/>
<property xil_pn:name="Wakeup Clock" xil_pn:value="Startup Clock" xil_pn:valueState="default"/>
<property xil_pn:name="Working Directory" xil_pn:value="." xil_pn:valueState="non-default"/>
<property xil_pn:name="Write Timing Constraints" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="XOR Collapsing" xil_pn:value="true" xil_pn:valueState="default"/>
<!-- -->
<!-- The following properties are for internal use only. These should not be modified.-->
<!-- -->
<property xil_pn:name="PROP_BehavioralSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_DesignName" xil_pn:value="gtime" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_DevFamilyPMName" xil_pn:value="spartan3a" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_FPGAConfiguration" xil_pn:value="FPGAConfiguration" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostFitSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostMapSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostParSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostSynthSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostXlateSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PreSynthesis" xil_pn:value="PreSynthesis" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_intProjectCreationTimestamp" xil_pn:value="2012-08-28T23:51:54" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWbtProjectID" xil_pn:value="AAC6D7E01D414DD992A4DDE7C0B857EB" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWorkingDirLocWRTProjDir" xil_pn:value="Same" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWorkingDirUsed" xil_pn:value="No" xil_pn:valueState="non-default"/>
</properties>
 
<bindings/>
 
<libraries/>
 
</project>
/Designs/Measuring_instruments/AtomicCounter/VHDL/atomiccounter.bit
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Property changes:
Added: svn:mime-type
+application/octet-stream
\ No newline at end of property
/Designs/Measuring_instruments/AtomicCounter/VHDL/src/AtomicCounter.vhd
0,0 → 1,411
----------------------------------------------------------------------------------
-- Company: www.mlab.cz
-- Based on code written by MIHO.
--
-- HW Design Name: S3AN01A
-- Project Name: Atomic Counter
-- Target Devices: XC3S50AN-4
-- Tool versions: ISE 13.3
-- Description: Counter synchonised by GPS.
--
-- Dependencies: TTLPECL01A, GPS01A
--
-- Version: $Id: gtime.vhd 3177 2013-07-17 23:48:47Z kakl $
--
----------------------------------------------------------------------------------
 
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.numeric_std.ALL;
 
library UNISIM;
use UNISIM.vcomponents.all;
 
entity AtomicCounter is
generic (
-- Top Value for 100MHz Clock Counter
MAXCOUNT: integer := 10_000; -- Maximum for the first counter
MUXCOUNT: integer := 100_000 -- LED Display Multiplex Clock Divider
);
port (
-- Clock on PCB
CLK100MHz: in std_logic;
 
-- Mode Signals (usualy not used)
M: in std_logic_vector(2 downto 0);
VS: in std_logic_vector(2 downto 0);
 
-- Dipswitch Inputs
DIPSW: in std_logic_vector(7 downto 0);
 
-- Push Buttons
PB: in std_logic_vector(3 downto 0);
 
-- LED Bar Outputs
LED: out std_logic_vector(7 downto 0);
 
-- LED Display (8 digit with 7 segments and ddecimal point)
LD_A_n: out std_logic;
LD_B_n: out std_logic;
LD_C_n: out std_logic;
LD_D_n: out std_logic;
LD_E_n: out std_logic;
LD_F_n: out std_logic;
LD_G_n: out std_logic;
LD_DP_n: out std_logic;
LD_0_n: out std_logic;
LD_1_n: out std_logic;
LD_2_n: out std_logic;
LD_3_n: out std_logic;
LD_4_n: out std_logic;
LD_5_n: out std_logic;
LD_6_n: out std_logic;
LD_7_n: out std_logic;
 
-- VGA Video Out Port
VGA_R: out std_logic_vector(1 downto 0);
VGA_G: out std_logic_vector(1 downto 0);
VGA_B: out std_logic_vector(1 downto 0);
VGA_VS: out std_logic;
VGA_HS: out std_logic;
 
-- Bank 1 Pins - Inputs for this Test
B: inout std_logic_vector(24 downto 0);
-- PS/2 Bidirectional Port (open collector, J31 and J32)
PS2_CLK1: inout std_logic;
PS2_DATA1: inout std_logic;
PS2_CLK2: inout std_logic;
PS2_DATA2: inout std_logic;
 
-- Diferencial Signals on 4 pin header (J7)
DIF1P: inout std_logic;
DIF1N: inout std_logic;
DIF2P: inout std_logic;
DIF2N: inout std_logic;
 
-- I2C Signals (on connector J30)
I2C_SCL: inout std_logic;
I2C_SDA: inout std_logic;
 
-- Diferencial Signals on SATA like connectors (not SATA capable, J28 and J29)
SD1AP: inout std_logic;
SD1AN: inout std_logic;
SD1BP: inout std_logic;
SD1BN: inout std_logic;
SD2AP: inout std_logic;
SD2AN: inout std_logic;
SD2BP: inout std_logic;
SD2BN: inout std_logic;
 
-- Analog In Out
ANA_OUTD: out std_logic;
ANA_REFD: out std_logic;
ANA_IND: in std_logic;
 
-- SPI Memory Interface
SPI_CS_n: inout std_logic;
SPI_DO: inout std_logic;
SPI_DI: inout std_logic;
SPI_CLK: inout std_logic;
SPI_WP_n: inout std_logic
);
end entity AtomicCounter;
 
 
architecture AtomicCounter_a of AtomicCounter is
 
function to_bcd ( bin : std_logic_vector(15 downto 0) ) return std_logic_vector is
variable i : integer:=0;
variable mybcd : std_logic_vector(19 downto 0) := (others => '0');
variable bint : std_logic_vector(15 downto 0) := bin;
begin
for i in 0 to 15 loop -- repeating 16 times.
mybcd(19 downto 1) := mybcd(18 downto 0); --shifting the bits.
mybcd(0) := bint(15);
bint(15 downto 1) := bint(14 downto 0);
bint(0) :='0';
 
 
if(i < 15 and mybcd(3 downto 0) > "0100") then --add 3 if BCD digit is greater than 4.
mybcd(3 downto 0) := std_logic_vector(unsigned(mybcd(3 downto 0)) + 3);
end if;
 
if(i < 15 and mybcd(7 downto 4) > "0100") then --add 3 if BCD digit is greater than 4.
mybcd(7 downto 4) := std_logic_vector(unsigned(mybcd(7 downto 4)) + 3);
end if;
 
if(i < 15 and mybcd(11 downto 8) > "0100") then --add 3 if BCD digit is greater than 4.
mybcd(11 downto 8) := std_logic_vector(unsigned(mybcd(11 downto 8)) + 3);
end if;
 
if(i < 15 and mybcd(15 downto 12) > "0100") then --add 3 if BCD digit is greater than 4.
mybcd(15 downto 12) := std_logic_vector(unsigned(mybcd(15 downto 12)) + 3);
end if;
 
if(i < 15 and mybcd(19 downto 16) > "0100") then --add 3 if BCD digit is greater than 4.
mybcd(19 downto 16) := std_logic_vector(unsigned(mybcd(19 downto 16)) + 3);
end if;
 
end loop;
return mybcd;
end to_bcd;
 
 
-- Counters
-- ----------------
 
signal Counter: unsigned(13 downto 0) := "00000000000000"; -- Main Counter 1 Hz, max. 9.999 kHz (binary)
signal CounterMaxcount: unsigned(15 downto 0) := "0000000000000000"; -- Main Counter 10 kHz, max. 655.35 MHz (binary)
 
 
-- LED Display
-- -----------
 
signal NumberPom: std_logic_vector(35 downto 0) := X"000000000"; -- Variable for bin/BCD conversion
signal Number: std_logic_vector(35 downto 0) := X"000000000"; -- LED Display Input
signal Freq: std_logic_vector(31 downto 0) := X"00000000"; -- Measured Frequency
signal MuxCounter: unsigned(31 downto 0) := (others => '0'); -- LED Multiplex - Multiplex Clock Divider
signal Enable: std_logic;
signal Digits: std_logic_vector(7 downto 0) := X"01"; -- LED Multiplex - Digit Counter - LED Digit Output
signal Segments: std_logic_vector(0 to 7); -- LED Segment Output
signal Code: std_logic_vector(3 downto 0); -- BCD to 7 Segment Decoder Output
 
signal LO_CLOCK: std_logic; -- Frequency divided by 2
signal EXT_CLOCK: std_logic; -- Input Frequency
 
signal Decko: std_logic; -- D flip-flop
signal State: unsigned(2 downto 0) := (others => '0'); -- Inner states of automata
begin
 
-- Input divider by 2
process (EXT_CLOCK)
begin
if rising_edge(EXT_CLOCK) then
LO_CLOCK <= not LO_CLOCK;
end if;
end process;
 
 
-- Counter
process (LO_CLOCK)
begin
if rising_edge(LO_CLOCK) then
if (State = 3) or (State = 0) then
if Counter < MAXCOUNT-1 then
Counter <= Counter + 1;
else
Counter <= (others => '0');
CounterMaxcount <= CounterMaxcount + 1;
end if;
end if;
if (State = 1) then
Freq(15 downto 0) <= std_logic_vector("00"&Counter);
Freq(31 downto 16) <= std_logic_vector(CounterMaxcount);
end if;
if (State = 2) then
CounterMaxcount <= (others => '0');
Counter <= (others => '0');
end if;
end if;
 
end process;
 
 
-- Sampling 1PPS signal
process (LO_CLOCK)
begin
if rising_edge(LO_CLOCK) then
Decko <= B(22);
end if;
end process;
 
-- Automata for controlling the Counter
process (LO_CLOCK)
begin
if rising_edge(LO_CLOCK) then
if (Decko = '1') then
if (State < 3) then
State <= State + 1;
end if;
else
State <= (others => '0');
end if;
end if;
end process;
 
-- Coding to BCD for LED Display
 
process (Decko)
begin
if falling_edge(Decko) then
if DIPSW(7) = '0' then
NumberPom(15 downto 0) <= to_bcd(Freq(15 downto 0))(15 downto 0); -- Half frequency
NumberPom(35 downto 16) <= to_bcd(Freq(31 downto 16))(19 downto 0);
else
NumberPom(15 downto 0) <= to_bcd(Freq(14 downto 1)&"0")(15 downto 0); -- Full frequency
NumberPom(35 downto 16) <= to_bcd(Freq(30 downto 15))(19 downto 0);
end if;
end if;
end process;
 
Number(35 downto 0) <= NumberPom(35 downto 0);
LED(7) <= Decko; -- Disply 1PPS pulse on LEDbar
LED(6 downto 4) <= (others => '0');
LED(3 downto 0) <= Number(35 downto 32); -- Disply 100-th of MHz on LEDbar
 
-- LED Display (multiplexed)
-- =========================
 
-- Connect LED Display Output Ports (negative outputs)
LD_A_n <= not (Segments(0) and Enable);
LD_B_n <= not (Segments(1) and Enable);
LD_C_n <= not (Segments(2) and Enable);
LD_D_n <= not (Segments(3) and Enable);
LD_E_n <= not (Segments(4) and Enable);
LD_F_n <= not (Segments(5) and Enable);
LD_G_n <= not (Segments(6) and Enable);
LD_DP_n <= not (Segments(7) and Enable);
 
LD_0_n <= not Digits(0);
LD_1_n <= not Digits(1);
LD_2_n <= not Digits(2);
LD_3_n <= not Digits(3);
LD_4_n <= not Digits(4);
LD_5_n <= not Digits(5);
LD_6_n <= not Digits(6);
LD_7_n <= not Digits(7);
 
-- Time Multiplex
process (CLK100MHz)
begin
if rising_edge(CLK100MHz) then
if MuxCounter < MUXCOUNT-1 then
MuxCounter <= MuxCounter + 1;
else
MuxCounter <= (others => '0');
Digits(7 downto 0) <= Digits(6 downto 0) & Digits(7); -- Rotate Left
Enable <= '0';
end if;
if MuxCounter > (MUXCOUNT-4) then
Enable <= '1';
end if;
end if;
end process;
 
-- HEX to 7 Segmet Decoder
-- -- A
-- | | F B
-- -- G
-- | | E C
-- -- D H
-- ABCDEFGH
Segments <= "11111100" when Code="0000" else -- Digit 0
"01100000" when Code="0001" else -- Digit 1
"11011010" when Code="0010" else -- Digit 2
"11110010" when Code="0011" else -- Digit 3
"01100110" when Code="0100" else -- Digit 4
"10110110" when Code="0101" else -- Digit 5
"10111110" when Code="0110" else -- Digit 6
"11100000" when Code="0111" else -- Digit 7
"11111110" when Code="1000" else -- Digit 8
"11110110" when Code="1001" else -- Digit 9
"11101110" when Code="1010" else -- Digit A
"00111110" when Code="1011" else -- Digit b
"10011100" when Code="1100" else -- Digit C
"01111010" when Code="1101" else -- Digit d
"10011110" when Code="1110" else -- Digit E
"10001110" when Code="1111" else -- Digit F
"00000000";
 
Code <= Number( 3 downto 0) when Digits="00000001" else
Number( 7 downto 4) when Digits="00000010" else
Number(11 downto 8) when Digits="00000100" else
Number(15 downto 12) when Digits="00001000" else
Number(19 downto 16) when Digits="00010000" else
Number(23 downto 20) when Digits="00100000" else
Number(27 downto 24) when Digits="01000000" else
Number(31 downto 28) when Digits="10000000" else
"0000";
 
 
 
-- Diferencial In/Outs
-- ========================
DIFbuffer1 : IBUFGDS
generic map (
DIFF_TERM => FALSE, -- Differential Termination
IBUF_DELAY_VALUE => "0", -- Specify the amount of added input delay for buffer,
-- "0"-"16"
IOSTANDARD => "LVPECL_33")
port map (
I => SD1AP, -- Diff_p buffer input (connect directly to top-level port)
IB => SD1AN, -- Diff_n buffer input (connect directly to top-level port)
O => EXT_CLOCK -- Buffer output - Counter INPUT
);
 
OBUFDS_inst : OBUFDS
generic map (
IOSTANDARD => "LVDS_33")
port map (
O => SD2AP, -- Diff_p output (connect directly to top-level port)
OB => SD2AN, -- Diff_n output (connect directly to top-level port)
I => EXT_CLOCK -- Buffer input are connected directly to IBUFGDS
);
-- Output Signal on SATA Connector
-- SD1AP <= 'Z'; -- Counter INPUT
-- SD1AN <= 'Z';
SD1BP <= 'Z';
SD1BN <= 'Z';
 
-- Input Here via SATA Cable
-- SD2AP <= 'Z'; -- Counter OUTPUT
-- SD2AN <= 'Z';
SD2BP <= 'Z';
SD2BN <= 'Z';
 
 
-- Unused Signals
-- ==============
 
-- Differential inputs onn header
DIF1N <= 'Z';
DIF1P <= 'Z';
DIF2N <= 'Z';
DIF2P <= 'Z';
 
-- I2C Signals (on connector J30)
I2C_SCL <= 'Z';
I2C_SDA <= 'Z';
 
-- SPI Memory Interface
SPI_CS_n <= 'Z';
SPI_DO <= 'Z';
SPI_DI <= 'Z';
SPI_CLK <= 'Z';
SPI_WP_n <= 'Z';
 
-- A/D
ANA_OUTD <= 'Z';
ANA_REFD <= 'Z';
 
-- VGA
VGA_R <= "ZZ";
VGA_G <= "ZZ";
VGA_B <= "ZZ";
VGA_VS <= 'Z';
VGA_HS <= 'Z';
 
-- PS2
PS2_DATA2 <= 'Z';
PS2_CLK2 <='Z';
 
end architecture AtomicCounter_a;
/Designs/Measuring_instruments/AtomicCounter/VHDL/src/S3AN01B.ucf
0,0 → 1,155
# Board: www.mlab.cz S3AN01A
# Device: XC3S50AN-4C
# Setting: Generate Programming File / Startup Options / Drive Done Pin High: yes
# Main Clock (Embedded 100MHz board oscillator)
NET "CLK100MHz" LOC = P60 |IOSTANDARD = LVCMOS33;
#NET "CLK100MHz" LOC = P125 | IOSTANDARD = LVCMOS33;
 
NET "CLK100MHz" TNM_NET = CLK100MHz;
TIMESPEC TS_CLK100MHz = PERIOD "CLK100MHz" 100 MHz HIGH 50%;
 
NET "LO_CLOCK" TNM_NET = LO_CLOCK;
TIMESPEC TS_LO_CLOCK = PERIOD "LO_CLOCK" 5.0 ns HIGH 50%;
 
# For DCM connection across the whole chip
NET "CLK100MHz" CLOCK_DEDICATED_ROUTE = FALSE;
NET "PS2_CLK2" CLOCK_DEDICATED_ROUTE = FALSE;
 
# Mode signals
NET "M[0]" LOC = P38 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "M[1]" LOC = P37 |IOSTANDARD = LVCMOS33 |PULLUP = YES; # Use jumper on M1 and M2 for boot from external SPI Flash Memory
NET "M[2]" LOC = P39 |IOSTANDARD = LVCMOS33 |PULLUP = YES; # Use jumper on M2 for boot from internal Flash memory
# SPI Flash Vendor Mode Select (for external SPI boot Flash)
NET "VS[0]" LOC = P45 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "VS[1]" LOC = P44 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "VS[2]" LOC = P43 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
 
# DIP Switches (positive signals with pull-down)
NET "DIPSW[0]" LOC = P143 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "DIPSW[1]" LOC = P142 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "DIPSW[2]" LOC = P140 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "DIPSW[3]" LOC = P139 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "DIPSW[4]" LOC = P138 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "DIPSW[5]" LOC = P135 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "DIPSW[6]" LOC = P134 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "DIPSW[7]" LOC = P132 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
 
# Push Buttons (positive signals with pull-down)
NET "PB[0]" LOC = P121 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "PB[1]" LOC = P120 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "PB[2]" LOC = P117 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "PB[3]" LOC = P116 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
 
# LED String (positive output signals)
NET "LED[0]" LOC = P64 |IOSTANDARD = LVCMOS33;
NET "LED[1]" LOC = P63 |IOSTANDARD = LVCMOS33;
NET "LED[2]" LOC = P51 |IOSTANDARD = LVCMOS33;
NET "LED[3]" LOC = P50 |IOSTANDARD = LVCMOS33;
NET "LED[4]" LOC = P49 |IOSTANDARD = LVCMOS33;
NET "LED[5]" LOC = P48 |IOSTANDARD = LVCMOS33;
NET "LED[6]" LOC = P47 |IOSTANDARD = LVCMOS33;
NET "LED[7]" LOC = P46 |IOSTANDARD = LVCMOS33;
 
# LED Display Output Signals (negative, multiplexed)
NET "LD_A_n" LOC = P15 |IOSTANDARD = LVCMOS33;
NET "LD_B_n" LOC = P30 |IOSTANDARD = LVCMOS33;
NET "LD_C_n" LOC = P21 |IOSTANDARD = LVCMOS33;
NET "LD_D_n" LOC = P19 |IOSTANDARD = LVCMOS33;
NET "LD_E_n" LOC = P18 |IOSTANDARD = LVCMOS33;
NET "LD_F_n" LOC = P16 |IOSTANDARD = LVCMOS33;
NET "LD_G_n" LOC = P24 |IOSTANDARD = LVCMOS33;
NET "LD_DP_n" LOC = P20 |IOSTANDARD = LVCMOS33;
 
NET "LD_0_n" LOC = P25 |IOSTANDARD = LVCMOS33;
NET "LD_1_n" LOC = P31 |IOSTANDARD = LVCMOS33;
NET "LD_2_n" LOC = P32 |IOSTANDARD = LVCMOS33;
NET "LD_3_n" LOC = P13 |IOSTANDARD = LVCMOS33; # !!! Connect U1.13 with U1.33
NET "LD_4_n" LOC = P27 |IOSTANDARD = LVCMOS33;
NET "LD_5_n" LOC = P29 |IOSTANDARD = LVCMOS33;
NET "LD_6_n" LOC = P28 |IOSTANDARD = LVCMOS33;
NET "LD_7_n" LOC = P12 |IOSTANDARD = LVCMOS33; # !!! Connect U1.12 with U1.35
# VGA Analog Display Connection (outputs)
NET "VGA_R[0]" LOC = P3 |IOSTANDARD = LVCMOS33;
NET "VGA_R[1]" LOC = P4 |IOSTANDARD = LVCMOS33;
NET "VGA_G[0]" LOC = P5 |IOSTANDARD = LVCMOS33;
NET "VGA_G[1]" LOC = P6 |IOSTANDARD = LVCMOS33;
NET "VGA_B[0]" LOC = P7 |IOSTANDARD = LVCMOS33;
NET "VGA_B[1]" LOC = P8 |IOSTANDARD = LVCMOS33;
NET "VGA_VS" LOC = P10 |IOSTANDARD = LVCMOS33;
NET "VGA_HS" LOC = P11 |IOSTANDARD = LVCMOS33;
 
# Bank 1 Port (input for tests, pull-up)
NET "B[0]" LOC = P75 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[1]" LOC = P76 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[2]" LOC = P77 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[3]" LOC = P78 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[4]" LOC = P82 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[5]" LOC = P83 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[6]" LOC = P84 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[7]" LOC = P85 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[8]" LOC = P87 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[9]" LOC = P88 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[10]" LOC = P90 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[11]" LOC = P91 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[12]" LOC = P92 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[13]" LOC = P93 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[14]" LOC = P96 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[15]" LOC = P98 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[16]" LOC = P99 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[17]" LOC = P101 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[18]" LOC = P102 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[19]" LOC = P103 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[20]" LOC = P104 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[21]" LOC = P105 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[22]" LOC = P79 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[23]" LOC = P80 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[24]" LOC = P97 |IOSTANDARD = LVCMOS33 |PULLUP = YES; # Connected with B[23] on PCB
# PS/2 Bidirectional Port (open collector, J31 and J32)
#NET "PS2_CLK1" LOC = P | IOSTANDARD = LVCMOS33 | PULLUP = YES; # S3AN01A PCB Design has bug so these pins
#NET "PS2_DATA1" LOC = P | IOSTANDARD = LVCMOS33 | PULLUP = YES; # will be assinged after PCB redesign
NET "PS2_CLK2" LOC = P42 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "PS2_DATA2" LOC = P58 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
 
# Diferencial Signals on 4 pin header (J7)
NET "DIF1P" LOC = P110 |IOSTANDARD = LVCMOS33 ;
NET "DIF1N" LOC = P111 |IOSTANDARD = LVCMOS33 ;
NET "DIF2P" LOC = P112 |IOSTANDARD = LVCMOS33 ;
NET "DIF2N" LOC = P113 |IOSTANDARD = LVCMOS33 ;
 
# I2C Signals (on connector J30)
NET "I2C_SCL" LOC = P115 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "I2C_SDA" LOC = P114 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
 
# Diferencial Signals on SATA like connectors (not SATA capable, J28 and J29)
NET "SD1AP" LOC = P54 |IOSTANDARD = LVPECL_33;
NET "SD1AN" LOC = P55 |IOSTANDARD = LVPECL_33;
NET "SD1BP" LOC = P59 |IOSTANDARD = LVCMOS33 ;
NET "SD1BN" LOC = P57 |IOSTANDARD = LVCMOS33 ;
NET "SD2AP" LOC = P124 |IOSTANDARD = LVDS_33 ;
NET "SD2AN" LOC = P126 |IOSTANDARD = LVDS_33 ;
NET "SD2BP" LOC = P131 |IOSTANDARD = LVCMOS33 ;
NET "SD2BN" LOC = P129 |IOSTANDARD = LVCMOS33 ;
 
# SPI Memory Interface
NET "SPI_CS_n" LOC = P41 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "SPI_DO" LOC = P71 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "SPI_DI" LOC = P62 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "SPI_CLK" LOC = P72 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "SPI_WP_n" LOC = P70 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
 
# Analog In Out
NET "ANA_OUTD" LOC = P67 |IOSTANDARD = LVCMOS33;
NET "ANA_REFD" LOC = P68 |IOSTANDARD = LVCMOS33;
NET "ANA_IND" LOC = P69 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
 
/*
# Used Signals (test points)
NET "TPS1" LOC = P53 | IOSTANDARD = LVCMOS33 | PULLDOWN = YES;
NET "TPS2" LOC = P125 | IOSTANDARD = LVCMOS33 | PULLDOWN = YES;
NET "TPS3" LOC = P127 | IOSTANDARD = LVCMOS33 | PULLDOWN = YES;
NET "TPS4" LOC = P130 | IOSTANDARD = LVCMOS33 | PULLDOWN = YES;
NET "TPS5" LOC = P141 | IOSTANDARD = LVCMOS33 | PULLDOWN = YES;
NET "TPS6" LOC = P123 | IOSTANDARD = LVCMOS33 | PULLDOWN = YES;
NET "XXX1" LOC = P33 | IOSTANDARD = LVCMOS33 | PULLDOWN = YES; # input only
NET "XXX2" LOC = P35 | IOSTANDARD = LVCMOS33 | PULLDOWN = YES; # input only
*/