No changes between revisions
/Designs/Measuring_instruments/Echo01A/SW/sonar/debug/config.status |
---|
0,0 → 1,2032 |
#! /bin/bash |
# Generated by configure. |
# Run this file to recreate the current configuration. |
# Compiler output produced by configure, useful for debugging |
# configure, is in config.log if it exists. |
debug=false |
ac_cs_recheck=false |
ac_cs_silent=false |
SHELL=${CONFIG_SHELL-/bin/bash} |
## --------------------- ## |
## M4sh Initialization. ## |
## --------------------- ## |
# Be more Bourne compatible |
DUALCASE=1; export DUALCASE # for MKS sh |
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
emulate sh |
NULLCMD=: |
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which |
# is contrary to our usage. Disable this feature. |
alias -g '${1+"$@"}'='"$@"' |
setopt NO_GLOB_SUBST |
else |
case `(set -o) 2>/dev/null` in |
*posix*) set -o posix ;; |
esac |
fi |
# PATH needs CR |
# Avoid depending upon Character Ranges. |
as_cr_letters='abcdefghijklmnopqrstuvwxyz' |
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
as_cr_Letters=$as_cr_letters$as_cr_LETTERS |
as_cr_digits='0123456789' |
as_cr_alnum=$as_cr_Letters$as_cr_digits |
as_nl=' |
' |
export as_nl |
# Printing a long string crashes Solaris 7 /usr/bin/printf. |
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' |
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo |
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo |
if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then |
as_echo='printf %s\n' |
as_echo_n='printf %s' |
else |
if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then |
as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' |
as_echo_n='/usr/ucb/echo -n' |
else |
as_echo_body='eval expr "X$1" : "X\\(.*\\)"' |
as_echo_n_body='eval |
arg=$1; |
case $arg in |
*"$as_nl"*) |
expr "X$arg" : "X\\(.*\\)$as_nl"; |
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; |
esac; |
expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" |
' |
export as_echo_n_body |
as_echo_n='sh -c $as_echo_n_body as_echo' |
fi |
export as_echo_body |
as_echo='sh -c $as_echo_body as_echo' |
fi |
# The user is always right. |
if test "${PATH_SEPARATOR+set}" != set; then |
PATH_SEPARATOR=: |
(PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { |
(PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || |
PATH_SEPARATOR=';' |
} |
fi |
# Support unset when possible. |
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then |
as_unset=unset |
else |
as_unset=false |
fi |
# IFS |
# We need space, tab and new line, in precisely that order. Quoting is |
# there to prevent editors from complaining about space-tab. |
# (If _AS_PATH_WALK were called with IFS unset, it would disable word |
# splitting by setting IFS to empty value.) |
IFS=" "" $as_nl" |
# Find who we are. Look in the path if we contain no directory separator. |
case $0 in |
*[\\/]* ) as_myself=$0 ;; |
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break |
done |
IFS=$as_save_IFS |
;; |
esac |
# We did not find ourselves, most probably we were run as `sh COMMAND' |
# in which case we are not to be found in the path. |
if test "x$as_myself" = x; then |
as_myself=$0 |
fi |
if test ! -f "$as_myself"; then |
$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 |
{ (exit 1); exit 1; } |
fi |
# Work around bugs in pre-3.0 UWIN ksh. |
for as_var in ENV MAIL MAILPATH |
do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
done |
PS1='$ ' |
PS2='> ' |
PS4='+ ' |
# NLS nuisances. |
LC_ALL=C |
export LC_ALL |
LANGUAGE=C |
export LANGUAGE |
# Required to use basename. |
if expr a : '\(a\)' >/dev/null 2>&1 && |
test "X`expr 00001 : '.*\(...\)'`" = X001; then |
as_expr=expr |
else |
as_expr=false |
fi |
if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then |
as_basename=basename |
else |
as_basename=false |
fi |
# Name of the executable. |
as_me=`$as_basename -- "$0" || |
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ |
X"$0" : 'X\(//\)$' \| \ |
X"$0" : 'X\(/\)' \| . 2>/dev/null || |
$as_echo X/"$0" | |
sed '/^.*\/\([^/][^/]*\)\/*$/{ |
s//\1/ |
q |
} |
/^X\/\(\/\/\)$/{ |
s//\1/ |
q |
} |
/^X\/\(\/\).*/{ |
s//\1/ |
q |
} |
s/.*/./; q'` |
# CDPATH. |
$as_unset CDPATH |
as_lineno_1=$LINENO |
as_lineno_2=$LINENO |
test "x$as_lineno_1" != "x$as_lineno_2" && |
test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { |
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO |
# uniformly replaced by the line number. The first 'sed' inserts a |
# line-number line after each line using $LINENO; the second 'sed' |
# does the real work. The second script uses 'N' to pair each |
# line-number line with the line containing $LINENO, and appends |
# trailing '-' during substitution so that $LINENO is not a special |
# case at line end. |
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the |
# scripts with optimization help from Paolo Bonzini. Blame Lee |
# E. McMahon (1931-1989) for sed's syntax. :-) |
sed -n ' |
p |
/[$]LINENO/= |
' <$as_myself | |
sed ' |
s/[$]LINENO.*/&-/ |
t lineno |
b |
:lineno |
N |
:loop |
s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ |
t loop |
s/-\n.*// |
' >$as_me.lineno && |
chmod +x "$as_me.lineno" || |
{ $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 |
{ (exit 1); exit 1; }; } |
# Don't try to exec as it changes $[0], causing all sort of problems |
# (the dirname of $[0] is not the place where we might find the |
# original and so on. Autoconf is especially sensitive to this). |
. "./$as_me.lineno" |
# Exit status is that of the last command. |
exit |
} |
if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then |
as_dirname=dirname |
else |
as_dirname=false |
fi |
ECHO_C= ECHO_N= ECHO_T= |
case `echo -n x` in |
-n*) |
case `echo 'x\c'` in |
*c*) ECHO_T=' ';; # ECHO_T is single tab character. |
*) ECHO_C='\c';; |
esac;; |
*) |
ECHO_N='-n';; |
esac |
if expr a : '\(a\)' >/dev/null 2>&1 && |
test "X`expr 00001 : '.*\(...\)'`" = X001; then |
as_expr=expr |
else |
as_expr=false |
fi |
rm -f conf$$ conf$$.exe conf$$.file |
if test -d conf$$.dir; then |
rm -f conf$$.dir/conf$$.file |
else |
rm -f conf$$.dir |
mkdir conf$$.dir 2>/dev/null |
fi |
if (echo >conf$$.file) 2>/dev/null; then |
if ln -s conf$$.file conf$$ 2>/dev/null; then |
as_ln_s='ln -s' |
# ... but there are two gotchas: |
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. |
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. |
# In both cases, we have to default to `cp -p'. |
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || |
as_ln_s='cp -p' |
elif ln conf$$.file conf$$ 2>/dev/null; then |
as_ln_s=ln |
else |
as_ln_s='cp -p' |
fi |
else |
as_ln_s='cp -p' |
fi |
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file |
rmdir conf$$.dir 2>/dev/null |
if mkdir -p . 2>/dev/null; then |
as_mkdir_p=: |
else |
test -d ./-p && rmdir ./-p |
as_mkdir_p=false |
fi |
if test -x / >/dev/null 2>&1; then |
as_test_x='test -x' |
else |
if ls -dL / >/dev/null 2>&1; then |
as_ls_L_option=L |
else |
as_ls_L_option= |
fi |
as_test_x=' |
eval sh -c '\'' |
if test -d "$1"; then |
test -d "$1/."; |
else |
case $1 in |
-*)set "./$1";; |
esac; |
case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in |
???[sx]*):;;*)false;;esac;fi |
'\'' sh |
' |
fi |
as_executable_p=$as_test_x |
# Sed expression to map a string onto a valid CPP name. |
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" |
# Sed expression to map a string onto a valid variable name. |
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" |
exec 6>&1 |
# Save the log message, to keep $[0] and so on meaningful, and to |
# report actual input values of CONFIG_FILES etc. instead of their |
# values after options handling. |
ac_log=" |
This file was extended by $as_me, which was |
generated by GNU Autoconf 2.63. Invocation command line was |
CONFIG_FILES = $CONFIG_FILES |
CONFIG_HEADERS = $CONFIG_HEADERS |
CONFIG_LINKS = $CONFIG_LINKS |
CONFIG_COMMANDS = $CONFIG_COMMANDS |
$ $0 $@ |
on `(hostname || uname -n) 2>/dev/null | sed 1q` |
" |
# Files that config.status was made for. |
config_files=" Makefile src/Makefile" |
config_headers=" config.h" |
config_commands=" depfiles libtool" |
ac_cs_usage="\ |
\`$as_me' instantiates files from templates according to the |
current configuration. |
Usage: $0 [OPTION]... [FILE]... |
-h, --help print this help, then exit |
-V, --version print version number and configuration settings, then exit |
-q, --quiet, --silent |
do not print progress messages |
-d, --debug don't remove temporary files |
--recheck update $as_me by reconfiguring in the same conditions |
--file=FILE[:TEMPLATE] |
instantiate the configuration file FILE |
--header=FILE[:TEMPLATE] |
instantiate the configuration header FILE |
Configuration files: |
$config_files |
Configuration headers: |
$config_headers |
Configuration commands: |
$config_commands |
Report bugs to <bug-autoconf@gnu.org>." |
ac_cs_version="\ |
config.status |
configured by /home/kaklik/projects/programy/C/ix86/echo/SW/sonar/configure, generated by GNU Autoconf 2.63, |
with options \"'--enable-debug=full' 'CFLAGS=-O0 -g3 ' 'LDFLAGS=-lasound'\" |
Copyright (C) 2008 Free Software Foundation, Inc. |
This config.status script is free software; the Free Software Foundation |
gives unlimited permission to copy, distribute and modify it." |
ac_pwd='/home/kaklik/projects/programy/C/ix86/echo/SW/sonar/debug' |
srcdir='/home/kaklik/projects/programy/C/ix86/echo/SW/sonar' |
INSTALL='/usr/bin/install -c' |
MKDIR_P='/bin/mkdir -p' |
AWK='gawk' |
test -n "$AWK" || AWK=awk |
# The default lists apply if the user does not specify any file. |
ac_need_defaults=: |
while test $# != 0 |
do |
case $1 in |
--*=*) |
ac_option=`expr "X$1" : 'X\([^=]*\)='` |
ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` |
ac_shift=: |
;; |
*) |
ac_option=$1 |
ac_optarg=$2 |
ac_shift=shift |
;; |
esac |
case $ac_option in |
# Handling of the options. |
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) |
ac_cs_recheck=: ;; |
--version | --versio | --versi | --vers | --ver | --ve | --v | -V ) |
$as_echo "$ac_cs_version"; exit ;; |
--debug | --debu | --deb | --de | --d | -d ) |
debug=: ;; |
--file | --fil | --fi | --f ) |
$ac_shift |
case $ac_optarg in |
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; |
esac |
CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" |
ac_need_defaults=false;; |
--header | --heade | --head | --hea ) |
$ac_shift |
case $ac_optarg in |
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; |
esac |
CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" |
ac_need_defaults=false;; |
--he | --h) |
# Conflict between --help and --header |
{ $as_echo "$as_me: error: ambiguous option: $1 |
Try \`$0 --help' for more information." >&2 |
{ (exit 1); exit 1; }; };; |
--help | --hel | -h ) |
$as_echo "$ac_cs_usage"; exit ;; |
-q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| -silent | --silent | --silen | --sile | --sil | --si | --s) |
ac_cs_silent=: ;; |
# This is an error. |
-*) { $as_echo "$as_me: error: unrecognized option: $1 |
Try \`$0 --help' for more information." >&2 |
{ (exit 1); exit 1; }; } ;; |
*) ac_config_targets="$ac_config_targets $1" |
ac_need_defaults=false ;; |
esac |
shift |
done |
ac_configure_extra_args= |
if $ac_cs_silent; then |
exec 6>/dev/null |
ac_configure_extra_args="$ac_configure_extra_args --silent" |
fi |
if $ac_cs_recheck; then |
set X '/bin/bash' '/home/kaklik/projects/programy/C/ix86/echo/SW/sonar/configure' '--enable-debug=full' 'CFLAGS=-O0 -g3 ' 'LDFLAGS=-lasound' $ac_configure_extra_args --no-create --no-recursion |
shift |
$as_echo "running CONFIG_SHELL=/bin/bash $*" >&6 |
CONFIG_SHELL='/bin/bash' |
export CONFIG_SHELL |
exec "$@" |
fi |
exec 5>>config.log |
{ |
echo |
sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX |
## Running $as_me. ## |
_ASBOX |
$as_echo "$ac_log" |
} >&5 |
# |
# INIT-COMMANDS |
# |
AMDEP_TRUE="" ac_aux_dir="/home/kaklik/projects/programy/C/ix86/echo/SW/sonar" |
# The HP-UX ksh and POSIX shell print the target directory to stdout |
# if CDPATH is set. |
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH |
sed_quote_subst='s/\(["`$\\]\)/\\\1/g' |
double_quote_subst='s/\(["`\\]\)/\\\1/g' |
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' |
macro_version='2.2.6' |
macro_revision='1.3012' |
enable_shared='yes' |
enable_static='yes' |
pic_mode='default' |
enable_fast_install='yes' |
host_alias='' |
host='x86_64-unknown-linux-gnu' |
host_os='linux-gnu' |
build_alias='' |
build='x86_64-unknown-linux-gnu' |
build_os='linux-gnu' |
SED='/bin/sed' |
Xsed='/bin/sed -e 1s/^X//' |
GREP='/bin/grep' |
EGREP='/bin/grep -E' |
FGREP='/bin/grep -F' |
LD='/usr/bin/ld -m elf_x86_64' |
NM='/usr/bin/nm -B' |
LN_S='ln -s' |
max_cmd_len='1572864' |
ac_objext='o' |
exeext='' |
lt_unset='unset' |
lt_SP2NL='tr \040 \012' |
lt_NL2SP='tr \015\012 \040\040' |
reload_flag=' -r' |
reload_cmds='$LD$reload_flag -o $output$reload_objs' |
OBJDUMP='objdump' |
deplibs_check_method='pass_all' |
file_magic_cmd='$MAGIC_CMD' |
AR='ar' |
AR_FLAGS='cru' |
STRIP='strip' |
RANLIB='ranlib' |
old_postinstall_cmds='chmod 644 $oldlib~$RANLIB $oldlib' |
old_postuninstall_cmds='' |
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs~$RANLIB $oldlib' |
CC='gcc' |
CFLAGS='-O0 -g3 ' |
compiler='gcc' |
GCC='yes' |
lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\''' |
lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\''' |
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"\2", (void *) \&\2},/p'\''' |
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \(lib[^ ]*\)$/ {"\2", (void *) \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"lib\2", (void *) \&\2},/p'\''' |
objdir='.libs' |
SHELL='/bin/bash' |
ECHO='echo' |
MAGIC_CMD='file' |
lt_prog_compiler_no_builtin_flag=' -fno-builtin' |
lt_prog_compiler_wl='-Wl,' |
lt_prog_compiler_pic=' -fPIC -DPIC' |
lt_prog_compiler_static='-static' |
lt_cv_prog_compiler_c_o='yes' |
need_locks='no' |
DSYMUTIL='' |
NMEDIT='' |
LIPO='' |
OTOOL='' |
OTOOL64='' |
libext='a' |
shrext_cmds='.so' |
extract_expsyms_cmds='' |
archive_cmds_need_lc='no' |
enable_shared_with_static_runtimes='no' |
export_dynamic_flag_spec='${wl}--export-dynamic' |
whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' |
compiler_needs_object='no' |
old_archive_from_new_cmds='' |
old_archive_from_expsyms_cmds='' |
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' |
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ |
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ |
echo "local: *; };" >> $output_objdir/$libname.ver~ |
$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' |
module_cmds='' |
module_expsym_cmds='' |
with_gnu_ld='yes' |
allow_undefined_flag='' |
no_undefined_flag='' |
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' |
hardcode_libdir_flag_spec_ld='' |
hardcode_libdir_separator='' |
hardcode_direct='no' |
hardcode_direct_absolute='no' |
hardcode_minus_L='no' |
hardcode_shlibpath_var='unsupported' |
hardcode_automatic='no' |
inherit_rpath='no' |
link_all_deplibs='unknown' |
fix_srcfile_path='' |
always_export_symbols='no' |
export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' |
exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' |
include_expsyms='' |
prelink_cmds='' |
file_list_spec='' |
variables_saved_for_relink='PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH' |
need_lib_prefix='no' |
need_version='no' |
version_type='linux' |
runpath_var='LD_RUN_PATH' |
shlibpath_var='LD_LIBRARY_PATH' |
shlibpath_overrides_runpath='no' |
libname_spec='lib$name' |
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' |
soname_spec='${libname}${release}${shared_ext}$major' |
postinstall_cmds='' |
postuninstall_cmds='' |
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' |
finish_eval='' |
hardcode_into_libs='yes' |
sys_lib_search_path_spec='/usr/lib/gcc/x86_64-linux-gnu/4.3.3 /usr/lib /lib' |
sys_lib_dlsearch_path_spec='/lib /usr/lib /usr/lib32/alsa-lib /usr/lib/alsa-lib /usr/local/lib /lib/x86_64-linux-gnu /usr/lib/x86_64-linux-gnu ' |
hardcode_action='immediate' |
enable_dlopen='unknown' |
enable_dlopen_self='unknown' |
enable_dlopen_self_static='unknown' |
old_striplib='strip --strip-debug' |
striplib='strip --strip-unneeded' |
LTCC='gcc' |
LTCFLAGS='-O0 -g3 ' |
compiler='gcc' |
# Quote evaled strings. |
for var in SED GREP EGREP FGREP LD NM LN_S lt_SP2NL lt_NL2SP reload_flag OBJDUMP deplibs_check_method file_magic_cmd AR AR_FLAGS STRIP RANLIB CC CFLAGS compiler lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl lt_cv_sys_global_symbol_to_c_name_address lt_cv_sys_global_symbol_to_c_name_address_lib_prefix SHELL ECHO lt_prog_compiler_no_builtin_flag lt_prog_compiler_wl lt_prog_compiler_pic lt_prog_compiler_static lt_cv_prog_compiler_c_o need_locks DSYMUTIL NMEDIT LIPO OTOOL OTOOL64 shrext_cmds export_dynamic_flag_spec whole_archive_flag_spec compiler_needs_object with_gnu_ld allow_undefined_flag no_undefined_flag hardcode_libdir_flag_spec hardcode_libdir_flag_spec_ld hardcode_libdir_separator fix_srcfile_path exclude_expsyms include_expsyms file_list_spec variables_saved_for_relink libname_spec library_names_spec soname_spec finish_eval old_striplib striplib; do |
case `eval \\$ECHO "X\\$$var"` in |
*[\\\`\"\$]*) |
eval "lt_$var=\\\"\`\$ECHO \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" |
;; |
*) |
eval "lt_$var=\\\"\$$var\\\"" |
;; |
esac |
done |
# Double-quote double-evaled strings. |
for var in reload_cmds old_postinstall_cmds old_postuninstall_cmds old_archive_cmds extract_expsyms_cmds old_archive_from_new_cmds old_archive_from_expsyms_cmds archive_cmds archive_expsym_cmds module_cmds module_expsym_cmds export_symbols_cmds prelink_cmds postinstall_cmds postuninstall_cmds finish_cmds sys_lib_search_path_spec sys_lib_dlsearch_path_spec; do |
case `eval \\$ECHO "X\\$$var"` in |
*[\\\`\"\$]*) |
eval "lt_$var=\\\"\`\$ECHO \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" |
;; |
*) |
eval "lt_$var=\\\"\$$var\\\"" |
;; |
esac |
done |
# Fix-up fallback echo if it was mangled by the above quoting rules. |
case $lt_ECHO in |
*'\$0 --fallback-echo"') lt_ECHO=`$ECHO "X$lt_ECHO" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` |
;; |
esac |
ac_aux_dir='/home/kaklik/projects/programy/C/ix86/echo/SW/sonar' |
xsi_shell='yes' |
lt_shell_append='yes' |
# See if we are running on zsh, and set the options which allow our |
# commands through without removal of \ escapes INIT. |
if test -n "${ZSH_VERSION+set}" ; then |
setopt NO_GLOB_SUBST |
fi |
PACKAGE='sonar' |
VERSION='0.1' |
TIMESTAMP='' |
RM='rm -f' |
ofile='libtool' |
# Handling of arguments. |
for ac_config_target in $ac_config_targets |
do |
case $ac_config_target in |
"config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; |
"depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; |
"libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; |
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; |
"src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; |
*) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 |
$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} |
{ (exit 1); exit 1; }; };; |
esac |
done |
# If the user did not use the arguments to specify the items to instantiate, |
# then the envvar interface is used. Set only those that are not. |
# We use the long form for the default assignment because of an extremely |
# bizarre bug on SunOS 4.1.3. |
if $ac_need_defaults; then |
test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files |
test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers |
test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands |
fi |
# Have a temporary directory for convenience. Make it in the build tree |
# simply because there is no reason against having it here, and in addition, |
# creating and moving files from /tmp can sometimes cause problems. |
# Hook for its removal unless debugging. |
# Note that there is a small window in which the directory will not be cleaned: |
# after its creation but before its name has been assigned to `$tmp'. |
$debug || |
{ |
tmp= |
trap 'exit_status=$? |
{ test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status |
' 0 |
trap '{ (exit 1); exit 1; }' 1 2 13 15 |
} |
# Create a (secure) tmp directory for tmp files. |
{ |
tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && |
test -n "$tmp" && test -d "$tmp" |
} || |
{ |
tmp=./conf$$-$RANDOM |
(umask 077 && mkdir "$tmp") |
} || |
{ |
$as_echo "$as_me: cannot create a temporary directory in ." >&2 |
{ (exit 1); exit 1; } |
} |
# Set up the scripts for CONFIG_FILES section. |
# No need to generate them if there are no CONFIG_FILES. |
# This happens for instance with `./config.status config.h'. |
if test -n "$CONFIG_FILES"; then |
+' |
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null` |
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then |
+ ac_cs_awk_cr='\\r' |
+else |
+ ac_cs_awk_cr=$ac_cr |
+fi |
+ |
+echo 'BEGIN {' >"$tmp/subs1.awk" && |
+cat >>"$tmp/subs1.awk" <<\_ACAWK && |
+S["LTLIBOBJS"]="" |
+S["LIBOBJS"]="" |
+S["CPP"]="gcc -E" |
+S["OTOOL64"]="" |
+S["OTOOL"]="" |
+S["LIPO"]="" |
+S["NMEDIT"]="" |
+S["DSYMUTIL"]="" |
+S["lt_ECHO"]="echo" |
+S["RANLIB"]="ranlib" |
+S["AR"]="ar" |
+S["OBJDUMP"]="objdump" |
+S["LN_S"]="ln -s" |
+S["NM"]="/usr/bin/nm -B" |
+S["ac_ct_DUMPBIN"]="" |
+S["DUMPBIN"]="" |
+S["LD"]="/usr/bin/ld -m elf_x86_64" |
+S["FGREP"]="/bin/grep -F" |
+S["EGREP"]="/bin/grep -E" |
+S["GREP"]="/bin/grep" |
+S["SED"]="/bin/sed" |
+S["host_os"]="linux-gnu" |
+S["host_vendor"]="unknown" |
+S["host_cpu"]="x86_64" |
+S["host"]="x86_64-unknown-linux-gnu" |
+S["build_os"]="linux-gnu" |
+S["build_vendor"]="unknown" |
+S["build_cpu"]="x86_64" |
+S["build"]="x86_64-unknown-linux-gnu" |
+S["LIBTOOL"]="$(SHELL) $(top_builddir)/libtool" |
+S["am__fastdepCC_FALSE"]="#" |
+S["am__fastdepCC_TRUE"]="" |
+S["CCDEPMODE"]="depmode=gcc3" |
+S["AMDEPBACKSLASH"]="\\" |
+S["AMDEP_FALSE"]="#" |
+S["AMDEP_TRUE"]="" |
+S["am__quote"]="" |
+S["am__include"]="include" |
+S["DEPDIR"]=".deps" |
+S["OBJEXT"]="o" |
+S["EXEEXT"]="" |
+S["ac_ct_CC"]="gcc" |
+S["CPPFLAGS"]="" |
+S["LDFLAGS"]="-lasound" |
+S["CFLAGS"]="-O0 -g3 " |
+S["CC"]="gcc" |
+S["am__untar"]="${AMTAR} xf -" |
+S["am__tar"]="${AMTAR} chof - \"$$tardir\"" |
+S["AMTAR"]="${SHELL} /home/kaklik/projects/programy/C/ix86/echo/SW/sonar/missing --run tar" |
+S["am__leading_dot"]="." |
+S["SET_MAKE"]="" |
+S["AWK"]="gawk" |
+S["mkdir_p"]="/bin/mkdir -p" |
+S["MKDIR_P"]="/bin/mkdir -p" |
+S["INSTALL_STRIP_PROGRAM"]="$(install_sh) -c -s" |
+S["STRIP"]="strip" |
+S["install_sh"]="$(SHELL) /home/kaklik/projects/programy/C/ix86/echo/SW/sonar/install-sh" |
+S["MAKEINFO"]="${SHELL} /home/kaklik/projects/programy/C/ix86/echo/SW/sonar/missing --run makeinfo" |
+S["AUTOHEADER"]="${SHELL} /home/kaklik/projects/programy/C/ix86/echo/SW/sonar/missing --run autoheader" |
+S["AUTOMAKE"]="${SHELL} /home/kaklik/projects/programy/C/ix86/echo/SW/sonar/missing --run automake-1.10" |
+S["AUTOCONF"]="${SHELL} /home/kaklik/projects/programy/C/ix86/echo/SW/sonar/missing --run autoconf" |
+S["ACLOCAL"]="${SHELL} /home/kaklik/projects/programy/C/ix86/echo/SW/sonar/missing --run aclocal-1.10" |
+S["VERSION"]="0.1" |
+S["PACKAGE"]="sonar" |
+S["CYGPATH_W"]="echo" |
+S["am__isrc"]=" -I$(srcdir)" |
+S["INSTALL_DATA"]="${INSTALL} -m 644" |
+S["INSTALL_SCRIPT"]="${INSTALL}" |
+S["INSTALL_PROGRAM"]="${INSTALL}" |
+S["target_alias"]="" |
+S["host_alias"]="" |
+S["build_alias"]="" |
+S["LIBS"]="" |
+S["ECHO_T"]="" |
+S["ECHO_N"]="-n" |
+S["ECHO_C"]="" |
+S["DEFS"]="-DHAVE_CONFIG_H" |
+S["mandir"]="${datarootdir}/man" |
+S["localedir"]="${datarootdir}/locale" |
+S["libdir"]="${exec_prefix}/lib" |
+S["psdir"]="${docdir}" |
+S["pdfdir"]="${docdir}" |
+S["dvidir"]="${docdir}" |
+S["htmldir"]="${docdir}" |
+S["infodir"]="${datarootdir}/info" |
+S["docdir"]="${datarootdir}/doc/${PACKAGE}" |
+S["oldincludedir"]="/usr/include" |
+S["includedir"]="${prefix}/include" |
+S["localstatedir"]="${prefix}/var" |
+S["sharedstatedir"]="${prefix}/com" |
+S["sysconfdir"]="${prefix}/etc" |
+S["datadir"]="${datarootdir}" |
+S["datarootdir"]="${prefix}/share" |
+S["libexecdir"]="${exec_prefix}/libexec" |
+S["sbindir"]="${exec_prefix}/sbin" |
+S["bindir"]="${exec_prefix}/bin" |
+S["program_transform_name"]="s,x,x," |
+S["prefix"]="/usr/local" |
+S["exec_prefix"]="${prefix}" |
+S["PACKAGE_BUGREPORT"]="" |
+S["PACKAGE_STRING"]="" |
+S["PACKAGE_VERSION"]="" |
+S["PACKAGE_TARNAME"]="" |
+S["PACKAGE_NAME"]="" |
+S["PATH_SEPARATOR"]=":" |
+S["SHELL"]="/bin/bash" |
+_ACAWK |
+cat >>"$tmp/subs1.awk" <<_ACAWK && |
+ for (key in S) S_is_set[key] = 1 |
+ FS = "" |
+ |
+} |
+{ |
+ line = $ 0 |
+ nfields = split(line, field, "@") |
+ substed = 0 |
+ len = length(field[1]) |
+ for (i = 2; i < nfields; i++) { |
+ key = field[i] |
+ keylen = length(key) |
+ if (S_is_set[key]) { |
+ value = S[key] |
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) |
+ len += length(value) + length(field[++i]) |
+ substed = 1 |
+ } else |
+ len += 1 + keylen |
+ } |
+ |
+ print line |
+} |
+ |
+_ACAWK |
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then |
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" |
+else |
+ cat |
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ |
+ || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 |
+$as_echo "$as_me: error: could not setup config files machinery" >&2;} |
+ { (exit 1); exit 1; }; } |
+fi # test -n "$CONFIG_FILES" |
+ |
+# Set up the scripts for CONFIG_HEADERS section. |
+# No need to generate them if there are no CONFIG_HEADERS. |
+# This happens for instance with `./config.status Makefile'. |
+if test -n "$CONFIG_HEADERS"; then |
+cat >"$tmp/defines.awk" <<\_ACAWK || |
+BEGIN { |
+D["PACKAGE_NAME"]=" \"\"" |
+D["PACKAGE_TARNAME"]=" \"\"" |
+D["PACKAGE_VERSION"]=" \"\"" |
+D["PACKAGE_STRING"]=" \"\"" |
+D["PACKAGE_BUGREPORT"]=" \"\"" |
+D["PACKAGE"]=" \"sonar\"" |
+D["VERSION"]=" \"0.1\"" |
+D["STDC_HEADERS"]=" 1" |
+D["HAVE_SYS_TYPES_H"]=" 1" |
+D["HAVE_SYS_STAT_H"]=" 1" |
+D["HAVE_STDLIB_H"]=" 1" |
+D["HAVE_STRING_H"]=" 1" |
+D["HAVE_MEMORY_H"]=" 1" |
+D["HAVE_STRINGS_H"]=" 1" |
+D["HAVE_INTTYPES_H"]=" 1" |
+D["HAVE_STDINT_H"]=" 1" |
+D["HAVE_UNISTD_H"]=" 1" |
+D["HAVE_DLFCN_H"]=" 1" |
+D["LT_OBJDIR"]=" \".libs/\"" |
+ for (key in D) D_is_set[key] = 1 |
+ FS = "" |
+} |
+/^[\t ]*#[\t ]*(define|undef)[\t ]+[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*([\t (]|$)/ { |
+ line = $ 0 |
+ split(line, arg, " ") |
+ if (arg[1] == "#") { |
+ defundef = arg[2] |
+ mac1 = arg[3] |
+ } else { |
+ defundef = substr(arg[1], 2) |
+ mac1 = arg[2] |
+ } |
+ split(mac1, mac2, "(") #) |
+ macro = mac2[1] |
+ prefix = substr(line, 1, index(line, defundef) - 1) |
+ if (D_is_set[macro]) { |
+ # Preserve the white space surrounding the "#". |
+ print prefix "define", macro P[macro] D[macro] |
+ next |
+ } else { |
+ # Replace #undef with comments. This is necessary, for example, |
+ # in the case of _POSIX_SOURCE, which is predefined and required |
+ # on some systems where configure will not decide to define it. |
+ if (defundef == "undef") { |
+ print "/*", prefix defundef, macro, "*/" |
+ next |
+ } |
+ } |
+} |
+{ print } |
+_ACAWK |
+ { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 |
+$as_echo "$as_me: error: could not setup config headers machinery" >&2;} |
+ { (exit 1); exit 1; }; } |
+fi # test -n "$CONFIG_HEADERS" |
+ |
+ |
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" |
+shift |
+for ac_tag |
+do |
+ case $ac_tag in |
+ :[FHLC]) ac_mode=$ac_tag; continue;; |
+ esac |
+ case $ac_mode$ac_tag in |
+ :[FHL]*:*);; |
+ :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5 |
+$as_echo "$as_me: error: invalid tag $ac_tag" >&2;} |
+ { (exit 1); exit 1; }; };; |
+ :[FH]-) ac_tag=-:-;; |
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; |
+ esac |
+ ac_save_IFS=$IFS |
+ IFS=: |
+ set x $ac_tag |
+ IFS=$ac_save_IFS |
+ shift |
+ ac_file=$1 |
+ shift |
+ |
+ case $ac_mode in |
+ :L) ac_source=$1;; |
+ :[FH]) |
+ ac_file_inputs= |
+ for ac_f |
+ do |
+ case $ac_f in |
+ -) ac_f="$tmp/stdin";; |
+ *) # Look for the file first in the build tree, then in the source tree |
+ # (if the path is not absolute). The absolute path cannot be DOS-style, |
+ # because $ac_f cannot contain `:'. |
+ test -f "$ac_f" || |
+ case $ac_f in |
+ [\\/$]*) false;; |
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; |
+ esac || |
+ { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 |
+$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} |
+ { (exit 1); exit 1; }; };; |
+ esac |
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac |
+ ac_file_inputs="$ac_file_inputs '$ac_f'" |
+ done |
+ |
+ # Let's still pretend it is `configure' which instantiates (i.e., don't |
+ # use $as_me), people would be surprised to read: |
+ # /* config.h. Generated by config.status. */ |
+ configure_input='Generated from '` |
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' |
+ `' by configure.' |
+ if test x"$ac_file" != x-; then |
+ configure_input="$ac_file. $configure_input" |
+ { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 |
+$as_echo "$as_me: creating $ac_file" >&6;} |
+ fi |
+ # Neutralize special characters interpreted by sed in replacement strings. |
+ case $configure_input in #( |
+ *\&* | *\|* | *\\* ) |
+ ac_sed_conf_input=`$as_echo "$configure_input" | |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #( |
+ *) ac_sed_conf_input=$configure_input;; |
+ esac |
+ |
+ case $ac_tag in |
+ *:-:* | *:-) cat >"$tmp/stdin" \ |
+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 |
+$as_echo "$as_me: error: could not create $ac_file" >&2;} |
+ { (exit 1); exit 1; }; } ;; |
+ esac |
+ ;; |
+ esac |
+ |
+ ac_dir=`$as_dirname -- "$ac_file" || |
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
+ X"$ac_file" : 'X\(//\)[^/]' \| \ |
+ X"$ac_file" : 'X\(//\)$' \| \ |
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || |
+$as_echo X"$ac_file" | |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
+ s//\1/ |
+ q |
+ } |
+ /^X\(\/\/\)[^/].*/{ |
+ s//\1/ |
+ q |
+ } |
+ /^X\(\/\/\)$/{ |
+ s//\1/ |
+ q |
+ } |
+ /^X\(\/\).*/{ |
+ s//\1/ |
+ q |
+ } |
+ s/.*/./; q'` |
+ { as_dir="$ac_dir" |
+ case $as_dir in #( |
+ -*) as_dir=./$as_dir;; |
+ esac |
+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { |
+ as_dirs= |
+ while :; do |
+ case $as_dir in #( |
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( |
+ *) as_qdir=$as_dir;; |
+ esac |
+ as_dirs="'$as_qdir' $as_dirs" |
+ as_dir=`$as_dirname -- "$as_dir" || |
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
+ X"$as_dir" : 'X\(//\)[^/]' \| \ |
+ X"$as_dir" : 'X\(//\)$' \| \ |
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || |
+$as_echo X"$as_dir" | |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
+ s//\1/ |
+ q |
+ } |
+ /^X\(\/\/\)[^/].*/{ |
+ s//\1/ |
+ q |
+ } |
+ /^X\(\/\/\)$/{ |
+ s//\1/ |
+ q |
+ } |
+ /^X\(\/\).*/{ |
+ s//\1/ |
+ q |
+ } |
+ s/.*/./; q'` |
+ test -d "$as_dir" && break |
+ done |
+ test -z "$as_dirs" || eval "mkdir $as_dirs" |
+ } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 |
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} |
+ { (exit 1); exit 1; }; }; } |
+ ac_builddir=. |
+ |
+case "$ac_dir" in |
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; |
+*) |
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` |
+ # A ".." for each directory in $ac_dir_suffix. |
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` |
+ case $ac_top_builddir_sub in |
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; |
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; |
+ esac ;; |
+esac |
+ac_abs_top_builddir=$ac_pwd |
+ac_abs_builddir=$ac_pwd$ac_dir_suffix |
+# for backward compatibility: |
+ac_top_builddir=$ac_top_build_prefix |
+ |
+case $srcdir in |
+ .) # We are building in place. |
+ ac_srcdir=. |
+ ac_top_srcdir=$ac_top_builddir_sub |
+ ac_abs_top_srcdir=$ac_pwd ;; |
+ [\\/]* | ?:[\\/]* ) # Absolute name. |
+ ac_srcdir=$srcdir$ac_dir_suffix; |
+ ac_top_srcdir=$srcdir |
+ ac_abs_top_srcdir=$srcdir ;; |
+ *) # Relative name. |
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix |
+ ac_top_srcdir=$ac_top_build_prefix$srcdir |
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; |
+esac |
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix |
+ |
+ |
+ case $ac_mode in |
+ :F) |
+ # |
+ # CONFIG_FILE |
+ # |
+ |
+ case $INSTALL in |
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; |
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; |
+ esac |
+ ac_MKDIR_P=$MKDIR_P |
+ case $MKDIR_P in |
+ [\\/$]* | ?:[\\/]* ) ;; |
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; |
+ esac |
+# If the template does not know about datarootdir, expand it. |
+# FIXME: This hack should be removed a few years after 2.60. |
+ac_datarootdir_hack=; ac_datarootdir_seen= |
+ |
+ac_sed_dataroot=' |
+/datarootdir/ { |
+ p |
+ q |
+} |
+/@datadir@/p |
+/@docdir@/p |
+/@infodir@/p |
+/@localedir@/p |
+/@mandir@/p |
+' |
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in |
+*datarootdir*) ac_datarootdir_seen=yes;; |
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) |
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 |
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} |
+ ac_datarootdir_hack=' |
+ s&@datadir@&${datarootdir}&g |
+ s&@docdir@&${datarootdir}/doc/${PACKAGE}&g |
+ s&@infodir@&${datarootdir}/info&g |
+ s&@localedir@&${datarootdir}/locale&g |
+ s&@mandir@&${datarootdir}/man&g |
+ s&\${datarootdir}&${prefix}/share&g' ;; |
+esac |
+ac_sed_extra=" |
+ |
+:t |
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b |
+s|@configure_input@|$ac_sed_conf_input|;t t |
+s&@top_builddir@&$ac_top_builddir_sub&;t t |
+s&@top_build_prefix@&$ac_top_build_prefix&;t t |
+s&@srcdir@&$ac_srcdir&;t t |
+s&@abs_srcdir@&$ac_abs_srcdir&;t t |
+s&@top_srcdir@&$ac_top_srcdir&;t t |
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t |
+s&@builddir@&$ac_builddir&;t t |
+s&@abs_builddir@&$ac_abs_builddir&;t t |
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t |
+s&@INSTALL@&$ac_INSTALL&;t t |
+s&@MKDIR_P@&$ac_MKDIR_P&;t t |
+$ac_datarootdir_hack |
+" |
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ |
+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 |
+$as_echo "$as_me: error: could not create $ac_file" >&2;} |
+ { (exit 1); exit 1; }; } |
+ |
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && |
+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && |
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && |
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' |
+which seems to be undefined. Please make sure it is defined." >&5 |
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' |
+which seems to be undefined. Please make sure it is defined." >&2;} |
+ |
+ rm -f "$tmp/stdin" |
+ case $ac_file in |
+ -) cat "$tmp/out" && rm -f "$tmp/out";; |
+ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; |
+ esac \ |
+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 |
+$as_echo "$as_me: error: could not create $ac_file" >&2;} |
+ { (exit 1); exit 1; }; } |
+ ;; |
+ :H) |
+ # |
+ # CONFIG_HEADER |
+ # |
+ if test x"$ac_file" != x-; then |
+ { |
+ $as_echo "/* $configure_input */" \ |
+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" |
+ } >"$tmp/config.h" \ |
+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 |
+$as_echo "$as_me: error: could not create $ac_file" >&2;} |
+ { (exit 1); exit 1; }; } |
+ if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then |
+ { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 |
+$as_echo "$as_me: $ac_file is unchanged" >&6;} |
+ else |
+ rm -f "$ac_file" |
+ mv "$tmp/config.h" "$ac_file" \ |
+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 |
+$as_echo "$as_me: error: could not create $ac_file" >&2;} |
+ { (exit 1); exit 1; }; } |
+ fi |
+ else |
+ $as_echo "/* $configure_input */" \ |
+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ |
+ || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 |
+$as_echo "$as_me: error: could not create -" >&2;} |
+ { (exit 1); exit 1; }; } |
+ fi |
+# Compute "$ac_file"'s index in $config_headers. |
+_am_arg="$ac_file" |
+_am_stamp_count=1 |
+for _am_header in $config_headers :; do |
+ case $_am_header in |
+ $_am_arg | $_am_arg:* ) |
+ break ;; |
+ * ) |
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;; |
+ esac |
+done |
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || |
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
+ X"$_am_arg" : 'X\(//\)[^/]' \| \ |
+ X"$_am_arg" : 'X\(//\)$' \| \ |
+ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || |
+$as_echo X"$_am_arg" | |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
+ s//\1/ |
+ q |
+ } |
+ /^X\(\/\/\)[^/].*/{ |
+ s//\1/ |
+ q |
+ } |
+ /^X\(\/\/\)$/{ |
+ s//\1/ |
+ q |
+ } |
+ /^X\(\/\).*/{ |
+ s//\1/ |
+ q |
+ } |
+ s/.*/./; q'`/stamp-h$_am_stamp_count |
+ ;; |
+ |
+ :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 |
+$as_echo "$as_me: executing $ac_file commands" >&6;} |
+ ;; |
+ esac |
+ |
+ |
+ case $ac_file$ac_mode in |
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || { |
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files |
+ # are listed without --file. Let's play safe and only enable the eval |
+ # if we detect the quoting. |
+ case $CONFIG_FILES in |
+ *\'*) eval set x "$CONFIG_FILES" ;; |
+ *) set x $CONFIG_FILES ;; |
+ esac |
+ shift |
+ for mf |
+ do |
+ # Strip MF so we end up with the name of the file. |
+ mf=`echo "$mf" | sed -e 's/:.*$//'` |
+ # Check whether this is an Automake generated Makefile or not. |
+ # We used to match only the files named `Makefile.in', but |
+ # some people rename them; so instead we look at the file content. |
+ # Grep'ing the first line is not enough: some people post-process |
+ # each Makefile.in and add a new line on top of each file to say so. |
+ # Grep'ing the whole file is not good either: AIX grep has a line |
+ # limit of 2048, but all sed's we know have understand at least 4000. |
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then |
+ dirpart=`$as_dirname -- "$mf" || |
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
+ X"$mf" : 'X\(//\)[^/]' \| \ |
+ X"$mf" : 'X\(//\)$' \| \ |
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null || |
+$as_echo X"$mf" | |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
+ s//\1/ |
+ q |
+ } |
+ /^X\(\/\/\)[^/].*/{ |
+ s//\1/ |
+ q |
+ } |
+ /^X\(\/\/\)$/{ |
+ s//\1/ |
+ q |
+ } |
+ /^X\(\/\).*/{ |
+ s//\1/ |
+ q |
+ } |
+ s/.*/./; q'` |
+ else |
+ continue |
+ fi |
+ # Extract the definition of DEPDIR, am__include, and am__quote |
+ # from the Makefile without running `make'. |
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` |
+ test -z "$DEPDIR" && continue |
+ am__include=`sed -n 's/^am__include = //p' < "$mf"` |
+ test -z "am__include" && continue |
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` |
+ # When using ansi2knr, U may be empty or an underscore; expand it |
+ U=`sed -n 's/^U = //p' < "$mf"` |
+ # Find all dependency output files, they are included files with |
+ # $(DEPDIR) in their names. We invoke sed twice because it is the |
+ # simplest approach to changing $(DEPDIR) to its actual value in the |
+ # expansion. |
+ for file in `sed -n " |
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ |
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do |
+ # Make sure the directory exists. |
+ test -f "$dirpart/$file" && continue |
+ fdir=`$as_dirname -- "$file" || |
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
+ X"$file" : 'X\(//\)[^/]' \| \ |
+ X"$file" : 'X\(//\)$' \| \ |
+ X"$file" : 'X\(/\)' \| . 2>/dev/null || |
+$as_echo X"$file" | |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
+ s//\1/ |
+ q |
+ } |
+ /^X\(\/\/\)[^/].*/{ |
+ s//\1/ |
+ q |
+ } |
+ /^X\(\/\/\)$/{ |
+ s//\1/ |
+ q |
+ } |
+ /^X\(\/\).*/{ |
+ s//\1/ |
+ q |
+ } |
+ s/.*/./; q'` |
+ { as_dir=$dirpart/$fdir |
+ case $as_dir in #( |
+ -*) as_dir=./$as_dir;; |
+ esac |
+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { |
+ as_dirs= |
+ while :; do |
+ case $as_dir in #( |
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( |
+ *) as_qdir=$as_dir;; |
+ esac |
+ as_dirs="'$as_qdir' $as_dirs" |
+ as_dir=`$as_dirname -- "$as_dir" || |
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
+ X"$as_dir" : 'X\(//\)[^/]' \| \ |
+ X"$as_dir" : 'X\(//\)$' \| \ |
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || |
+$as_echo X"$as_dir" | |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
+ s//\1/ |
+ q |
+ } |
+ /^X\(\/\/\)[^/].*/{ |
+ s//\1/ |
+ q |
+ } |
+ /^X\(\/\/\)$/{ |
+ s//\1/ |
+ q |
+ } |
+ /^X\(\/\).*/{ |
+ s//\1/ |
+ q |
+ } |
+ s/.*/./; q'` |
+ test -d "$as_dir" && break |
+ done |
+ test -z "$as_dirs" || eval "mkdir $as_dirs" |
+ } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 |
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} |
+ { (exit 1); exit 1; }; }; } |
+ # echo "creating $dirpart/$file" |
+ echo '# dummy' > "$dirpart/$file" |
+ done |
+ done |
+} |
+ ;; |
+ "libtool":C) |
+ |
+ # See if we are running on zsh, and set the options which allow our |
+ # commands through without removal of \ escapes. |
+ if test -n "${ZSH_VERSION+set}" ; then |
+ setopt NO_GLOB_SUBST |
+ fi |
+ |
+ cfgfile="${ofile}T" |
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15 |
+ $RM "$cfgfile" |
+ |
+ cat <<_LT_EOF >> "$cfgfile" |
+#! $SHELL |
+ |
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. |
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION |
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: |
+# NOTE: Changes made to this file will be lost: look at ltmain.sh. |
+# |
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, |
+# 2006, 2007, 2008 Free Software Foundation, Inc. |
+# Written by Gordon Matzigkeit, 1996 |
+# |
+# This file is part of GNU Libtool. |
+# |
+# GNU Libtool is free software; you can redistribute it and/or |
+# modify it under the terms of the GNU General Public License as |
+# published by the Free Software Foundation; either version 2 of |
+# the License, or (at your option) any later version. |
+# |
+# As a special exception to the GNU General Public License, |
+# if you distribute this file as part of a program or library that |
+# is built using GNU Libtool, you may include this file under the |
+# same distribution terms that you use for the rest of that program. |
+# |
+# GNU Libtool is distributed in the hope that it will be useful, |
+# but WITHOUT ANY WARRANTY; without even the implied warranty of |
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
+# GNU General Public License for more details. |
+# |
+# You should have received a copy of the GNU General Public License |
+# along with GNU Libtool; see the file COPYING. If not, a copy |
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or |
+# obtained by writing to the Free Software Foundation, Inc., |
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. |
+ |
+ |
+# The names of the tagged configurations supported by this script. |
+available_tags="" |
+ |
+# ### BEGIN LIBTOOL CONFIG |
+ |
+# Which release of libtool.m4 was used? |
+macro_version=$macro_version |
+macro_revision=$macro_revision |
+ |
+# Whether or not to build shared libraries. |
+build_libtool_libs=$enable_shared |
+ |
+# Whether or not to build static libraries. |
+build_old_libs=$enable_static |
+ |
+# What type of objects to build. |
+pic_mode=$pic_mode |
+ |
+# Whether or not to optimize for fast installation. |
+fast_install=$enable_fast_install |
+ |
+# The host system. |
+host_alias=$host_alias |
+host=$host |
+host_os=$host_os |
+ |
+# The build system. |
+build_alias=$build_alias |
+build=$build |
+build_os=$build_os |
+ |
+# A sed program that does not truncate output. |
+SED=$lt_SED |
+ |
+# Sed that helps us avoid accidentally triggering echo(1) options like -n. |
+Xsed="\$SED -e 1s/^X//" |
+ |
+# A grep program that handles long lines. |
+GREP=$lt_GREP |
+ |
+# An ERE matcher. |
+EGREP=$lt_EGREP |
+ |
+# A literal string matcher. |
+FGREP=$lt_FGREP |
+ |
+# A BSD- or MS-compatible name lister. |
+NM=$lt_NM |
+ |
+# Whether we need soft or hard links. |
+LN_S=$lt_LN_S |
+ |
+# What is the maximum length of a command? |
+max_cmd_len=$max_cmd_len |
+ |
+# Object file suffix (normally "o"). |
+objext=$ac_objext |
+ |
+# Executable file suffix (normally ""). |
+exeext=$exeext |
+ |
+# whether the shell understands "unset". |
+lt_unset=$lt_unset |
+ |
+# turn spaces into newlines. |
+SP2NL=$lt_lt_SP2NL |
+ |
+# turn newlines into spaces. |
+NL2SP=$lt_lt_NL2SP |
+ |
+# How to create reloadable object files. |
+reload_flag=$lt_reload_flag |
+reload_cmds=$lt_reload_cmds |
+ |
+# An object symbol dumper. |
+OBJDUMP=$lt_OBJDUMP |
+ |
+# Method to check whether dependent libraries are shared objects. |
+deplibs_check_method=$lt_deplibs_check_method |
+ |
+# Command to use when deplibs_check_method == "file_magic". |
+file_magic_cmd=$lt_file_magic_cmd |
+ |
+# The archiver. |
+AR=$lt_AR |
+AR_FLAGS=$lt_AR_FLAGS |
+ |
+# A symbol stripping program. |
+STRIP=$lt_STRIP |
+ |
+# Commands used to install an old-style archive. |
+RANLIB=$lt_RANLIB |
+old_postinstall_cmds=$lt_old_postinstall_cmds |
+old_postuninstall_cmds=$lt_old_postuninstall_cmds |
+ |
+# A C compiler. |
+LTCC=$lt_CC |
+ |
+# LTCC compiler flags. |
+LTCFLAGS=$lt_CFLAGS |
+ |
+# Take the output of nm and produce a listing of raw symbols and C names. |
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe |
+ |
+# Transform the output of nm in a proper C declaration. |
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl |
+ |
+# Transform the output of nm in a C name address pair. |
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address |
+ |
+# Transform the output of nm in a C name address pair when lib prefix is needed. |
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix |
+ |
+# The name of the directory that contains temporary libtool files. |
+objdir=$objdir |
+ |
+# Shell to use when invoking shell scripts. |
+SHELL=$lt_SHELL |
+ |
+# An echo program that does not interpret backslashes. |
+ECHO=$lt_ECHO |
+ |
+# Used to examine libraries when file_magic_cmd begins with "file". |
+MAGIC_CMD=$MAGIC_CMD |
+ |
+# Must we lock files when doing compilation? |
+need_locks=$lt_need_locks |
+ |
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X. |
+DSYMUTIL=$lt_DSYMUTIL |
+ |
+# Tool to change global to local symbols on Mac OS X. |
+NMEDIT=$lt_NMEDIT |
+ |
+# Tool to manipulate fat objects and archives on Mac OS X. |
+LIPO=$lt_LIPO |
+ |
+# ldd/readelf like tool for Mach-O binaries on Mac OS X. |
+OTOOL=$lt_OTOOL |
+ |
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. |
+OTOOL64=$lt_OTOOL64 |
+ |
+# Old archive suffix (normally "a"). |
+libext=$libext |
+ |
+# Shared library suffix (normally ".so"). |
+shrext_cmds=$lt_shrext_cmds |
+ |
+# The commands to extract the exported symbol list from a shared archive. |
+extract_expsyms_cmds=$lt_extract_expsyms_cmds |
+ |
+# Variables whose values should be saved in libtool wrapper scripts and |
+# restored at link time. |
+variables_saved_for_relink=$lt_variables_saved_for_relink |
+ |
+# Do we need the "lib" prefix for modules? |
+need_lib_prefix=$need_lib_prefix |
+ |
+# Do we need a version for libraries? |
+need_version=$need_version |
+ |
+# Library versioning type. |
+version_type=$version_type |
+ |
+# Shared library runtime path variable. |
+runpath_var=$runpath_var |
+ |
+# Shared library path variable. |
+shlibpath_var=$shlibpath_var |
+ |
+# Is shlibpath searched before the hard-coded library search path? |
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath |
+ |
+# Format of library name prefix. |
+libname_spec=$lt_libname_spec |
+ |
+# List of archive names. First name is the real one, the rest are links. |
+# The last name is the one that the linker finds with -lNAME |
+library_names_spec=$lt_library_names_spec |
+ |
+# The coded name of the library, if different from the real name. |
+soname_spec=$lt_soname_spec |
+ |
+# Command to use after installation of a shared archive. |
+postinstall_cmds=$lt_postinstall_cmds |
+ |
+# Command to use after uninstallation of a shared archive. |
+postuninstall_cmds=$lt_postuninstall_cmds |
+ |
+# Commands used to finish a libtool library installation in a directory. |
+finish_cmds=$lt_finish_cmds |
+ |
+# As "finish_cmds", except a single script fragment to be evaled but |
+# not shown. |
+finish_eval=$lt_finish_eval |
+ |
+# Whether we should hardcode library paths into libraries. |
+hardcode_into_libs=$hardcode_into_libs |
+ |
+# Compile-time system search path for libraries. |
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec |
+ |
+# Run-time system search path for libraries. |
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec |
+ |
+# Whether dlopen is supported. |
+dlopen_support=$enable_dlopen |
+ |
+# Whether dlopen of programs is supported. |
+dlopen_self=$enable_dlopen_self |
+ |
+# Whether dlopen of statically linked programs is supported. |
+dlopen_self_static=$enable_dlopen_self_static |
+ |
+# Commands to strip libraries. |
+old_striplib=$lt_old_striplib |
+striplib=$lt_striplib |
+ |
+ |
+# The linker used to build libraries. |
+LD=$lt_LD |
+ |
+# Commands used to build an old-style archive. |
+old_archive_cmds=$lt_old_archive_cmds |
+ |
+# A language specific compiler. |
+CC=$lt_compiler |
+ |
+# Is the compiler the GNU compiler? |
+with_gcc=$GCC |
+ |
+# Compiler flag to turn off builtin functions. |
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag |
+ |
+# How to pass a linker flag through the compiler. |
+wl=$lt_lt_prog_compiler_wl |
+ |
+# Additional compiler flags for building library objects. |
+pic_flag=$lt_lt_prog_compiler_pic |
+ |
+# Compiler flag to prevent dynamic linking. |
+link_static_flag=$lt_lt_prog_compiler_static |
+ |
+# Does compiler simultaneously support -c and -o options? |
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o |
+ |
+# Whether or not to add -lc for building shared libraries. |
+build_libtool_need_lc=$archive_cmds_need_lc |
+ |
+# Whether or not to disallow shared libs when runtime libs are static. |
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes |
+ |
+# Compiler flag to allow reflexive dlopens. |
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec |
+ |
+# Compiler flag to generate shared objects directly from archives. |
+whole_archive_flag_spec=$lt_whole_archive_flag_spec |
+ |
+# Whether the compiler copes with passing no objects directly. |
+compiler_needs_object=$lt_compiler_needs_object |
+ |
+# Create an old-style archive from a shared archive. |
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds |
+ |
+# Create a temporary old-style archive to link instead of a shared archive. |
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds |
+ |
+# Commands used to build a shared archive. |
+archive_cmds=$lt_archive_cmds |
+archive_expsym_cmds=$lt_archive_expsym_cmds |
+ |
+# Commands used to build a loadable module if different from building |
+# a shared archive. |
+module_cmds=$lt_module_cmds |
+module_expsym_cmds=$lt_module_expsym_cmds |
+ |
+# Whether we are building with GNU ld or not. |
+with_gnu_ld=$lt_with_gnu_ld |
+ |
+# Flag that allows shared libraries with undefined symbols to be built. |
+allow_undefined_flag=$lt_allow_undefined_flag |
+ |
+# Flag that enforces no undefined symbols. |
+no_undefined_flag=$lt_no_undefined_flag |
+ |
+# Flag to hardcode \$libdir into a binary during linking. |
+# This must work even if \$libdir does not exist |
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec |
+ |
+# If ld is used when linking, flag to hardcode \$libdir into a binary |
+# during linking. This must work even if \$libdir does not exist. |
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld |
+ |
+# Whether we need a single "-rpath" flag with a separated argument. |
+hardcode_libdir_separator=$lt_hardcode_libdir_separator |
+ |
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes |
+# DIR into the resulting binary. |
+hardcode_direct=$hardcode_direct |
+ |
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes |
+# DIR into the resulting binary and the resulting library dependency is |
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the |
+# library is relocated. |
+hardcode_direct_absolute=$hardcode_direct_absolute |
+ |
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR |
+# into the resulting binary. |
+hardcode_minus_L=$hardcode_minus_L |
+ |
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR |
+# into the resulting binary. |
+hardcode_shlibpath_var=$hardcode_shlibpath_var |
+ |
+# Set to "yes" if building a shared library automatically hardcodes DIR |
+# into the library and all subsequent libraries and executables linked |
+# against it. |
+hardcode_automatic=$hardcode_automatic |
+ |
+# Set to yes if linker adds runtime paths of dependent libraries |
+# to runtime path list. |
+inherit_rpath=$inherit_rpath |
+ |
+# Whether libtool must link a program against all its dependency libraries. |
+link_all_deplibs=$link_all_deplibs |
+ |
+# Fix the shell variable \$srcfile for the compiler. |
+fix_srcfile_path=$lt_fix_srcfile_path |
+ |
+# Set to "yes" if exported symbols are required. |
+always_export_symbols=$always_export_symbols |
+ |
+# The commands to list exported symbols. |
+export_symbols_cmds=$lt_export_symbols_cmds |
+ |
+# Symbols that should not be listed in the preloaded symbols. |
+exclude_expsyms=$lt_exclude_expsyms |
+ |
+# Symbols that must always be exported. |
+include_expsyms=$lt_include_expsyms |
+ |
+# Commands necessary for linking programs (against libraries) with templates. |
+prelink_cmds=$lt_prelink_cmds |
+ |
+# Specify filename containing input files. |
+file_list_spec=$lt_file_list_spec |
+ |
+# How to hardcode a shared library path into an executable. |
+hardcode_action=$hardcode_action |
+ |
+# ### END LIBTOOL CONFIG |
+ |
+_LT_EOF |
+ |
+ case $host_os in |
+ aix3*) |
+ cat <<\_LT_EOF >> "$cfgfile" |
+# AIX sometimes has problems with the GCC collect2 program. For some |
+# reason, if we set the COLLECT_NAMES environment variable, the problems |
+# vanish in a puff of smoke. |
+if test "X${COLLECT_NAMES+set}" != Xset; then |
+ COLLECT_NAMES= |
+ export COLLECT_NAMES |
+fi |
+_LT_EOF |
+ ;; |
+ esac |
+ |
+ |
+ltmain="$ac_aux_dir/ltmain.sh" |
+ |
+ |
+ # We use sed instead of cat because bash on DJGPP gets confused if |
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in |
+ # text mode, it properly converts lines to CR/LF. This bash problem |
+ # is reportedly fixed, but why not run on old versions too? |
+ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ |
+ || (rm -f "$cfgfile"; exit 1) |
+ |
+ case $xsi_shell in |
+ yes) |
+ cat << \_LT_EOF >> "$cfgfile" |
+ |
+# func_dirname file append nondir_replacement |
+# Compute the dirname of FILE. If nonempty, add APPEND to the result, |
+# otherwise set result to NONDIR_REPLACEMENT. |
+func_dirname () |
+{ |
+ case ${1} in |
+ */*) func_dirname_result="${1%/*}${2}" ;; |
+ * ) func_dirname_result="${3}" ;; |
+ esac |
+} |
+ |
+# func_basename file |
+func_basename () |
+{ |
+ func_basename_result="${1##*/}" |
+} |
+ |
+# func_dirname_and_basename file append nondir_replacement |
+# perform func_basename and func_dirname in a single function |
+# call: |
+# dirname: Compute the dirname of FILE. If nonempty, |
+# add APPEND to the result, otherwise set result |
+# to NONDIR_REPLACEMENT. |
+# value returned in "$func_dirname_result" |
+# basename: Compute filename of FILE. |
+# value retuned in "$func_basename_result" |
+# Implementation must be kept synchronized with func_dirname |
+# and func_basename. For efficiency, we do not delegate to |
+# those functions but instead duplicate the functionality here. |
+func_dirname_and_basename () |
+{ |
+ case ${1} in |
+ */*) func_dirname_result="${1%/*}${2}" ;; |
+ * ) func_dirname_result="${3}" ;; |
+ esac |
+ func_basename_result="${1##*/}" |
+} |
+ |
+# func_stripname prefix suffix name |
+# strip PREFIX and SUFFIX off of NAME. |
+# PREFIX and SUFFIX must not contain globbing or regex special |
+# characters, hashes, percent signs, but SUFFIX may contain a leading |
+# dot (in which case that matches only a dot). |
+func_stripname () |
+{ |
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are |
+ # positional parameters, so assign one to ordinary parameter first. |
+ func_stripname_result=${3} |
+ func_stripname_result=${func_stripname_result#"${1}"} |
+ func_stripname_result=${func_stripname_result%"${2}"} |
+} |
+ |
+# func_opt_split |
+func_opt_split () |
+{ |
+ func_opt_split_opt=${1%%=*} |
+ func_opt_split_arg=${1#*=} |
+} |
+ |
+# func_lo2o object |
+func_lo2o () |
+{ |
+ case ${1} in |
+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;; |
+ *) func_lo2o_result=${1} ;; |
+ esac |
+} |
+ |
+# func_xform libobj-or-source |
+func_xform () |
+{ |
+ func_xform_result=${1%.*}.lo |
+} |
+ |
+# func_arith arithmetic-term... |
+func_arith () |
+{ |
+ func_arith_result=$(( $* )) |
+} |
+ |
+# func_len string |
+# STRING may not start with a hyphen. |
+func_len () |
+{ |
+ func_len_result=${#1} |
+} |
+ |
+_LT_EOF |
+ ;; |
+ *) # Bourne compatible functions. |
+ cat << \_LT_EOF >> "$cfgfile" |
+ |
+# func_dirname file append nondir_replacement |
+# Compute the dirname of FILE. If nonempty, add APPEND to the result, |
+# otherwise set result to NONDIR_REPLACEMENT. |
+func_dirname () |
+{ |
+ # Extract subdirectory from the argument. |
+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` |
+ if test "X$func_dirname_result" = "X${1}"; then |
+ func_dirname_result="${3}" |
+ else |
+ func_dirname_result="$func_dirname_result${2}" |
+ fi |
+} |
+ |
+# func_basename file |
+func_basename () |
+{ |
+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` |
+} |
+ |
+ |
+# func_stripname prefix suffix name |
+# strip PREFIX and SUFFIX off of NAME. |
+# PREFIX and SUFFIX must not contain globbing or regex special |
+# characters, hashes, percent signs, but SUFFIX may contain a leading |
+# dot (in which case that matches only a dot). |
+# func_strip_suffix prefix name |
+func_stripname () |
+{ |
+ case ${2} in |
+ .*) func_stripname_result=`$ECHO "X${3}" \ |
+ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; |
+ *) func_stripname_result=`$ECHO "X${3}" \ |
+ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; |
+ esac |
+} |
+ |
+# sed scripts: |
+my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' |
+my_sed_long_arg='1s/^-[^=]*=//' |
+ |
+# func_opt_split |
+func_opt_split () |
+{ |
+ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` |
+ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` |
+} |
+ |
+# func_lo2o object |
+func_lo2o () |
+{ |
+ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` |
+} |
+ |
+# func_xform libobj-or-source |
+func_xform () |
+{ |
+ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` |
+} |
+ |
+# func_arith arithmetic-term... |
+func_arith () |
+{ |
+ func_arith_result=`expr "$@"` |
+} |
+ |
+# func_len string |
+# STRING may not start with a hyphen. |
+func_len () |
+{ |
+ func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` |
+} |
+ |
+_LT_EOF |
+esac |
+ |
+case $lt_shell_append in |
+ yes) |
+ cat << \_LT_EOF >> "$cfgfile" |
+ |
+# func_append var value |
+# Append VALUE to the end of shell variable VAR. |
+func_append () |
+{ |
+ eval "$1+=\$2" |
+} |
+_LT_EOF |
+ ;; |
+ *) |
+ cat << \_LT_EOF >> "$cfgfile" |
+ |
+# func_append var value |
+# Append VALUE to the end of shell variable VAR. |
+func_append () |
+{ |
+ eval "$1=\$$1\$2" |
+} |
+ |
+_LT_EOF |
+ ;; |
+ esac |
+ |
+ |
+ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ |
+ || (rm -f "$cfgfile"; exit 1) |
+ |
+ mv -f "$cfgfile" "$ofile" || |
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") |
+ chmod +x "$ofile" |
+ |
+ ;; |
+ |
+ esac |
+done # for ac_tag |
+ |
+ |
+{ (exit 0); exit 0; } |
Property changes: |
Added: svn:executable |
+* |
\ No newline at end of property |