| 0,0 → 1,44 |
|---|
| // File: Application_18f4550.lkr |
| |
| // Use this linker for the USB application that will be self programmed by the HID bootloader. |
| // The HID bootloader project itself uses the BootModified.18f4450.lkr file instead. |
| |
| // THIS LINKER SCRIPT HAS BEEN MODIFIED... This version is intended to be used |
| // with the "PROGRAMMABLE_WITH_USB_HID_BOOTLOADER" bootloader. The HID |
| // bootloader occupies memory ranges 0x000-0xFFF. In order for the code generated |
| // by this project to work with the bootloader, the linker must not put any code |
| // in the 0x00-0xFFF address range. |
| |
| // This linker script was originated from the 18f4550.lkr file provided by |
| // the MCC18 distribution. |
| |
| LIBPATH . |
| |
| FILES c018i.o |
| FILES clib.lib |
| FILES p18f4550.lib |
| |
| CODEPAGE NAME=bootloader START=0x0 END=0xFFF PROTECTED |
| CODEPAGE NAME=vectors START=0x1000 END=0x1029 PROTECTED |
| CODEPAGE NAME=page START=0x102A END=0x7FFF |
| CODEPAGE NAME=idlocs START=0x200000 END=0x200007 PROTECTED |
| CODEPAGE NAME=config START=0x300000 END=0x30000D PROTECTED |
| CODEPAGE NAME=devid START=0x3FFFFE END=0x3FFFFF PROTECTED |
| CODEPAGE NAME=eedata START=0xF00000 END=0xF000FF PROTECTED |
| |
| ACCESSBANK NAME=accessram START=0x0 END=0x5F |
| DATABANK NAME=gpr0 START=0x60 END=0xFF |
| DATABANK NAME=gpr1 START=0x100 END=0x1FF |
| DATABANK NAME=gpr2 START=0x200 END=0x2FF |
| DATABANK NAME=gpr3 START=0x300 END=0x3FF |
| DATABANK NAME=usb4 START=0x400 END=0x4FF PROTECTED |
| DATABANK NAME=usb5 START=0x500 END=0x5FF PROTECTED |
| DATABANK NAME=usb6 START=0x600 END=0x6FF PROTECTED |
| DATABANK NAME=usb7 START=0x700 END=0x7FF PROTECTED |
| ACCESSBANK NAME=accesssfr START=0xF60 END=0xFFF PROTECTED |
| |
| SECTION NAME=CONFIG ROM=config |
| |
| STACK SIZE=0x100 RAM=gpr3 |
| |
| SECTION NAME=USB_VARS RAM=usb4 |