No changes between revisions
/Designs/Measuring_instruments/RMDS01B/HDL/gtime/src/gtime.vhd
0,0 → 1,365
----------------------------------------------------------------------------------
-- Company: www.mlab.cz
-- Based on code written by MIHO.
--
-- HW Design Name: S3AN01A
-- Project Name: gtime
-- Target Devices: XC3S50AN-4
-- Tool versions: ISE 13.3
-- Description: Time and frequency synchronisation for RDMS01A.
--
-- Dependencies: CLKGEN01B, GPS01A, STM32F10xRxT01A
--
-- Version: $Id$
--
----------------------------------------------------------------------------------
 
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.numeric_std.ALL;
 
library UNISIM;
use UNISIM.vcomponents.all;
 
entity gtime is
generic (
-- Top Value for 100MHz Clock Counter
MAXCOUNT: integer := 10_000; -- Maximum for the first counter
MUXCOUNT: integer := 100_000 -- LED Display Multiplex Clock Divider
);
port (
-- Clock on PCB
CLK100MHz: in std_logic;
-- Mode Signals (usualy not used)
M: in std_logic_vector(2 downto 0);
VS: in std_logic_vector(2 downto 0);
 
-- Dipswitch Inputs
DIPSW: in std_logic_vector(7 downto 0);
 
-- Push Buttons
PB: in std_logic_vector(3 downto 0);
 
-- LED Bar Outputs
LED: out std_logic_vector(7 downto 0);
 
-- LED Display (8 digit with 7 segments and ddecimal point)
LD_A_n: out std_logic;
LD_B_n: out std_logic;
LD_C_n: out std_logic;
LD_D_n: out std_logic;
LD_E_n: out std_logic;
LD_F_n: out std_logic;
LD_G_n: out std_logic;
LD_DP_n: out std_logic;
LD_0_n: out std_logic;
LD_1_n: out std_logic;
LD_2_n: out std_logic;
LD_3_n: out std_logic;
LD_4_n: out std_logic;
LD_5_n: out std_logic;
LD_6_n: out std_logic;
LD_7_n: out std_logic;
 
-- VGA Video Out Port
VGA_R: out std_logic_vector(1 downto 0);
VGA_G: out std_logic_vector(1 downto 0);
VGA_B: out std_logic_vector(1 downto 0);
VGA_VS: out std_logic;
VGA_HS: out std_logic;
 
-- Bank 1 Pins - Inputs for this Test
B: inout std_logic_vector(24 downto 0);
-- PS/2 Bidirectional Port (open collector, J31 and J32)
PS2_CLK1: inout std_logic;
PS2_DATA1: inout std_logic;
PS2_CLK2: inout std_logic;
PS2_DATA2: inout std_logic;
 
-- Diferencial Signals on 4 pin header (J7)
DIF1P: inout std_logic;
DIF1N: inout std_logic;
DIF2P: inout std_logic;
DIF2N: inout std_logic;
 
-- I2C Signals (on connector J30)
I2C_SCL: inout std_logic;
I2C_SDA: inout std_logic;
 
-- Diferencial Signals on SATA like connectors (not SATA capable, J28 and J29)
SD1AP: inout std_logic;
SD1AN: inout std_logic;
SD1BP: inout std_logic;
SD1BN: inout std_logic;
SD2AP: inout std_logic;
SD2AN: inout std_logic;
SD2BP: inout std_logic;
SD2BN: inout std_logic;
 
-- Analog In Out
ANA_OUTD: out std_logic;
ANA_REFD: out std_logic;
ANA_IND: in std_logic;
 
-- SPI Memory Interface
SPI_CS_n: inout std_logic;
SPI_DO: inout std_logic;
SPI_DI: inout std_logic;
SPI_CLK: inout std_logic;
SPI_WP_n: inout std_logic
);
end entity gtime;
 
 
architecture gtime_a of gtime is
 
 
-- Counter
-- ----------------
 
signal Counter: unsigned(31 downto 0) := X"00000000"; -- Main Counter 2 Hz (binary)
 
 
-- LED Display
-- -----------
 
signal Number: std_logic_vector(31 downto 0) := X"00000000"; -- LED Display Input
signal Freq: std_logic_vector(31 downto 0) := X"00000000"; -- Measured Frequency
signal MuxCounter: unsigned(31 downto 0) := (others => '0'); -- LED Multiplex - Multiplex Clock Divider
signal Enable: std_logic;
signal Digits: std_logic_vector(7 downto 0) := X"01"; -- LED Multiplex - Digit Counter - LED Digit Output
signal Segments: std_logic_vector(0 to 7); -- LED Segment Output
signal Code: std_logic_vector(3 downto 0); -- BCD to 7 Segment Decoder Output
 
-- signal LO_CLOCK: std_logic; -- Frequency divided by 2
signal EXT_CLOCK: std_logic; -- Input Frequency
 
signal Decko: std_logic; -- D flip-flop
signal State: unsigned(2 downto 0) := (others => '0'); -- Inner states of automata
signal SCLK: std_logic;
signal SCLK2: std_logic;
 
 
begin
 
-- Counter
process (EXT_CLOCK)
begin
if rising_edge(EXT_CLOCK) then
if (State = 2) or (State = 0) then
Counter <= Counter + 1;
end if;
if (State = 1) then
Freq(31 downto 0) <= std_logic_vector(Counter);
Counter <= (others => '0');
end if;
end if;
 
end process;
 
 
-- Sampling 1PPS signal
process (EXT_CLOCK)
begin
if rising_edge(EXT_CLOCK) then
Decko <= B(22);
end if;
end process;
 
-- Automata for controlling the Counter
process (EXT_CLOCK)
begin
if rising_edge(EXT_CLOCK) then
if (Decko = '1') then
if (State < 2) then
State <= State + 1;
end if;
else
State <= (others => '0');
end if;
end if;
end process;
 
process (Decko)
begin
if Decko = '0' then
LED(6) <= '1';
else
LED(6) <= '0';
end if;
end process;
SCLK <= B(0);
-- Output Shift Register
process (Decko,SCLK)
begin
if (Decko = '0') then
Number(31 downto 0) <= Freq(31 downto 0);
else
if rising_edge(SCLK) then
Number(30 downto 0) <= Number(31 downto 1);
end if;
end if;
end process;
 
B(1) <= Number(0);
B(2) <= Decko;
 
LED(7) <= Decko; -- Display 1PPS pulse on LEDbar
LED(5 downto 0) <= (others => '0');
 
-- LED Display (multiplexed)
-- =========================
 
-- Connect LED Display Output Ports (negative outputs)
LD_A_n <= not (Segments(0) and Enable);
LD_B_n <= not (Segments(1) and Enable);
LD_C_n <= not (Segments(2) and Enable);
LD_D_n <= not (Segments(3) and Enable);
LD_E_n <= not (Segments(4) and Enable);
LD_F_n <= not (Segments(5) and Enable);
LD_G_n <= not (Segments(6) and Enable);
LD_DP_n <= not (Segments(7) and Enable);
 
LD_0_n <= not Digits(0);
LD_1_n <= not Digits(1);
LD_2_n <= not Digits(2);
LD_3_n <= not Digits(3);
LD_4_n <= not Digits(4);
LD_5_n <= not Digits(5);
LD_6_n <= not Digits(6);
LD_7_n <= not Digits(7);
 
-- Time Multiplex
process (CLK100MHz)
begin
if rising_edge(CLK100MHz) then
if MuxCounter < MUXCOUNT-1 then
MuxCounter <= MuxCounter + 1;
else
MuxCounter <= (others => '0');
Digits(7 downto 0) <= Digits(6 downto 0) & Digits(7); -- Rotate Left
Enable <= '0';
end if;
if MuxCounter > (MUXCOUNT-4) then
Enable <= '1';
end if;
end if;
end process;
 
-- HEX to 7 Segmet Decoder
-- -- A
-- | | F B
-- -- G
-- | | E C
-- -- D H
-- ABCDEFGH
Segments <= "11111100" when Code="0000" else -- Digit 0
"01100000" when Code="0001" else -- Digit 1
"11011010" when Code="0010" else -- Digit 2
"11110010" when Code="0011" else -- Digit 3
"01100110" when Code="0100" else -- Digit 4
"10110110" when Code="0101" else -- Digit 5
"10111110" when Code="0110" else -- Digit 6
"11100000" when Code="0111" else -- Digit 7
"11111110" when Code="1000" else -- Digit 8
"11110110" when Code="1001" else -- Digit 9
"11101110" when Code="1010" else -- Digit A
"00111110" when Code="1011" else -- Digit b
"10011100" when Code="1100" else -- Digit C
"01111010" when Code="1101" else -- Digit d
"10011110" when Code="1110" else -- Digit E
"10001110" when Code="1111" else -- Digit F
"00000000";
 
Code <= Number( 3 downto 0) when Digits="00000001" else
Number( 7 downto 4) when Digits="00000010" else
Number(11 downto 8) when Digits="00000100" else
Number(15 downto 12) when Digits="00001000" else
Number(19 downto 16) when Digits="00010000" else
Number(23 downto 20) when Digits="00100000" else
Number(27 downto 24) when Digits="01000000" else
Number(31 downto 28) when Digits="10000000" else
"0000";
 
 
-- Diferencial In/Outs
-- ========================
DIFbuffer1 : IBUFGDS
generic map (
DIFF_TERM => FALSE, -- Differential Termination
IBUF_DELAY_VALUE => "0", -- Specify the amount of added input delay for buffer,
-- "0"-"16"
IOSTANDARD => "LVPECL_33")
port map (
I => SD1AP, -- Diff_p buffer input (connect directly to top-level port)
IB => SD1AN, -- Diff_n buffer input (connect directly to top-level port)
O => EXT_CLOCK -- Buffer output - Counter INPUT
);
 
OBUFDS_inst : OBUFDS
generic map (
IOSTANDARD => "LVDS_33")
port map (
O => SD2AP, -- Diff_p output (connect directly to top-level port)
OB => SD2AN, -- Diff_n output (connect directly to top-level port)
I => EXT_CLOCK -- Buffer input are connected directly to IBUFGDS
);
-- Output Signal on SATA Connector
-- SD1AP <= 'Z'; -- Counter INPUT
-- SD1AN <= 'Z';
SD1BP <= 'Z';
SD1BN <= 'Z';
 
-- Input Here via SATA Cable
-- SD2AP <= 'Z'; -- Counter OUTPUT
-- SD2AN <= 'Z';
SD2BP <= 'Z';
SD2BN <= 'Z';
 
 
-- Unused Signals
-- ==============
 
-- Differential inputs onn header
DIF1N <= 'Z';
DIF1P <= 'Z';
DIF2N <= 'Z';
DIF2P <= 'Z';
 
-- I2C Signals (on connector J30)
I2C_SCL <= 'Z';
I2C_SDA <= 'Z';
 
-- SPI Memory Interface
SPI_CS_n <= 'Z';
SPI_DO <= 'Z';
SPI_DI <= 'Z';
SPI_CLK <= 'Z';
SPI_WP_n <= 'Z';
 
-- A/D
ANA_OUTD <= 'Z';
ANA_REFD <= 'Z';
 
-- VGA
VGA_R <= "ZZ";
VGA_G <= "ZZ";
VGA_B <= "ZZ";
VGA_VS <= 'Z';
VGA_HS <= 'Z';
 
-- PS2
PS2_DATA2 <= 'Z';
PS2_CLK2 <='Z';
 
end architecture gtime_a;
Property changes:
Added: svn:keywords
+Id
\ No newline at end of property
/Designs/Measuring_instruments/RMDS01B/HDL/gtime/src/S3AN01B.ucf
0,0 → 1,160
# Board: www.mlab.cz S3AN01A
# Device: XC3S50AN-4C
# Setting: Generate Programming File / Startup Options / Drive Done Pin High: yes
# Main Clock (Embedded 100MHz board oscillator)
NET "CLK100MHz" LOC = P60 |IOSTANDARD = LVCMOS33;
#NET "CLK100MHz" LOC = P125 | IOSTANDARD = LVCMOS33;
#NET "SCLK" LOC = P1 |IOSTANDARD = LVCMOS33;
 
NET "CLK100MHz" TNM_NET = CLK100MHz;
TIMESPEC TS_CLK100MHz = PERIOD "CLK100MHz" 100 MHz HIGH 50%;
 
NET "EXT_CLOCK" TNM_NET = EXT_CLOCK;
TIMESPEC TS_EXT_CLOCK = PERIOD "EXT_CLOCK" 4.5 ns HIGH 50%;
 
#NET "SCLK" TNM_NET = SCLK;
#TIMESPEC TS_SCLK = PERIOD "SCLK" 50 MHz HIGH 10%;
NET "B<0>" CLOCK_DEDICATED_ROUTE = FALSE;
 
# For DCM connection across the whole chip
NET "CLK100MHz" CLOCK_DEDICATED_ROUTE = FALSE;
NET "PS2_CLK2" CLOCK_DEDICATED_ROUTE = FALSE;
 
# Mode signals
NET "M[0]" LOC = P38 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "M[1]" LOC = P37 |IOSTANDARD = LVCMOS33 |PULLUP = YES; # Use jumper on M1 and M2 for boot from external SPI Flash Memory
NET "M[2]" LOC = P39 |IOSTANDARD = LVCMOS33 |PULLUP = YES; # Use jumper on M2 for boot from internal Flash memory
# SPI Flash Vendor Mode Select (for external SPI boot Flash)
NET "VS[0]" LOC = P45 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "VS[1]" LOC = P44 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "VS[2]" LOC = P43 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
 
# DIP Switches (positive signals with pull-down)
NET "DIPSW[0]" LOC = P143 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "DIPSW[1]" LOC = P142 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "DIPSW[2]" LOC = P140 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "DIPSW[3]" LOC = P139 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "DIPSW[4]" LOC = P138 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "DIPSW[5]" LOC = P135 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "DIPSW[6]" LOC = P134 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "DIPSW[7]" LOC = P132 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
 
# Push Buttons (positive signals with pull-down)
NET "PB[0]" LOC = P121 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "PB[1]" LOC = P120 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "PB[2]" LOC = P117 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "PB[3]" LOC = P116 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
 
# LED String (positive output signals)
NET "LED[0]" LOC = P64 |IOSTANDARD = LVCMOS33;
NET "LED[1]" LOC = P63 |IOSTANDARD = LVCMOS33;
NET "LED[2]" LOC = P51 |IOSTANDARD = LVCMOS33;
NET "LED[3]" LOC = P50 |IOSTANDARD = LVCMOS33;
NET "LED[4]" LOC = P49 |IOSTANDARD = LVCMOS33;
NET "LED[5]" LOC = P48 |IOSTANDARD = LVCMOS33;
NET "LED[6]" LOC = P47 |IOSTANDARD = LVCMOS33;
NET "LED[7]" LOC = P46 |IOSTANDARD = LVCMOS33;
 
# LED Display Output Signals (negative, multiplexed)
NET "LD_A_n" LOC = P15 |IOSTANDARD = LVCMOS33;
NET "LD_B_n" LOC = P30 |IOSTANDARD = LVCMOS33;
NET "LD_C_n" LOC = P21 |IOSTANDARD = LVCMOS33;
NET "LD_D_n" LOC = P19 |IOSTANDARD = LVCMOS33;
NET "LD_E_n" LOC = P18 |IOSTANDARD = LVCMOS33;
NET "LD_F_n" LOC = P16 |IOSTANDARD = LVCMOS33;
NET "LD_G_n" LOC = P24 |IOSTANDARD = LVCMOS33;
NET "LD_DP_n" LOC = P20 |IOSTANDARD = LVCMOS33;
 
NET "LD_0_n" LOC = P25 |IOSTANDARD = LVCMOS33;
NET "LD_1_n" LOC = P31 |IOSTANDARD = LVCMOS33;
NET "LD_2_n" LOC = P32 |IOSTANDARD = LVCMOS33;
NET "LD_3_n" LOC = P13 |IOSTANDARD = LVCMOS33; # !!! Connect U1.13 with U1.33
NET "LD_4_n" LOC = P27 |IOSTANDARD = LVCMOS33;
NET "LD_5_n" LOC = P29 |IOSTANDARD = LVCMOS33;
NET "LD_6_n" LOC = P28 |IOSTANDARD = LVCMOS33;
NET "LD_7_n" LOC = P12 |IOSTANDARD = LVCMOS33; # !!! Connect U1.12 with U1.35
# VGA Analog Display Connection (outputs)
NET "VGA_R[0]" LOC = P3 |IOSTANDARD = LVCMOS33;
NET "VGA_R[1]" LOC = P4 |IOSTANDARD = LVCMOS33;
NET "VGA_G[0]" LOC = P5 |IOSTANDARD = LVCMOS33;
NET "VGA_G[1]" LOC = P6 |IOSTANDARD = LVCMOS33;
NET "VGA_B[0]" LOC = P7 |IOSTANDARD = LVCMOS33;
NET "VGA_B[1]" LOC = P8 |IOSTANDARD = LVCMOS33;
NET "VGA_VS" LOC = P10 |IOSTANDARD = LVCMOS33;
NET "VGA_HS" LOC = P11 |IOSTANDARD = LVCMOS33;
 
# Bank 1 Port (input for tests, pull-up)
NET "B[0]" LOC = P75 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[1]" LOC = P76 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[2]" LOC = P77 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[3]" LOC = P78 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[4]" LOC = P82 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[5]" LOC = P83 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[6]" LOC = P84 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[7]" LOC = P85 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[8]" LOC = P87 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[9]" LOC = P88 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[10]" LOC = P90 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[11]" LOC = P91 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[12]" LOC = P92 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[13]" LOC = P93 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[14]" LOC = P96 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[15]" LOC = P98 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[16]" LOC = P99 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[17]" LOC = P101 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[18]" LOC = P102 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[19]" LOC = P103 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[20]" LOC = P104 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[21]" LOC = P105 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[22]" LOC = P79 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[23]" LOC = P80 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "B[24]" LOC = P97 |IOSTANDARD = LVCMOS33 |PULLUP = YES; # Connected with B[23] on PCB
# PS/2 Bidirectional Port (open collector, J31 and J32)
#NET "PS2_CLK1" LOC = P | IOSTANDARD = LVCMOS33 | PULLUP = YES; # S3AN01A PCB Design has bug so these pins
#NET "PS2_DATA1" LOC = P | IOSTANDARD = LVCMOS33 | PULLUP = YES; # will be assinged after PCB redesign
NET "PS2_CLK2" LOC = P42 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "PS2_DATA2" LOC = P58 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
 
# Diferencial Signals on 4 pin header (J7)
NET "DIF1P" LOC = P110 |IOSTANDARD = LVCMOS33 ;
NET "DIF1N" LOC = P111 |IOSTANDARD = LVCMOS33 ;
NET "DIF2P" LOC = P112 |IOSTANDARD = LVCMOS33 ;
NET "DIF2N" LOC = P113 |IOSTANDARD = LVCMOS33 ;
 
# I2C Signals (on connector J30)
NET "I2C_SCL" LOC = P115 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "I2C_SDA" LOC = P114 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
 
# Diferencial Signals on SATA like connectors (not SATA capable, J28 and J29)
NET "SD1AP" LOC = P54 |IOSTANDARD = LVPECL_33;
NET "SD1AN" LOC = P55 |IOSTANDARD = LVPECL_33;
NET "SD1BP" LOC = P59 |IOSTANDARD = LVCMOS33 ;
NET "SD1BN" LOC = P57 |IOSTANDARD = LVCMOS33 ;
NET "SD2AP" LOC = P124 |IOSTANDARD = LVDS_33 ;
NET "SD2AN" LOC = P126 |IOSTANDARD = LVDS_33 ;
NET "SD2BP" LOC = P131 |IOSTANDARD = LVCMOS33 ;
NET "SD2BN" LOC = P129 |IOSTANDARD = LVCMOS33 ;
 
# SPI Memory Interface
NET "SPI_CS_n" LOC = P41 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
NET "SPI_DO" LOC = P71 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "SPI_DI" LOC = P62 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "SPI_CLK" LOC = P72 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
NET "SPI_WP_n" LOC = P70 |IOSTANDARD = LVCMOS33 |PULLUP = YES;
 
# Analog In Out
NET "ANA_OUTD" LOC = P67 |IOSTANDARD = LVCMOS33;
NET "ANA_REFD" LOC = P68 |IOSTANDARD = LVCMOS33;
NET "ANA_IND" LOC = P69 |IOSTANDARD = LVCMOS33 |PULLDOWN = YES;
 
/*
# Used Signals (test points)
NET "TPS1" LOC = P53 | IOSTANDARD = LVCMOS33 | PULLDOWN = YES;
NET "TPS2" LOC = P125 | IOSTANDARD = LVCMOS33 | PULLDOWN = YES;
NET "TPS3" LOC = P127 | IOSTANDARD = LVCMOS33 | PULLDOWN = YES;
NET "TPS4" LOC = P130 | IOSTANDARD = LVCMOS33 | PULLDOWN = YES;
NET "TPS5" LOC = P141 | IOSTANDARD = LVCMOS33 | PULLDOWN = YES;
NET "TPS6" LOC = P123 | IOSTANDARD = LVCMOS33 | PULLDOWN = YES;
NET "XXX1" LOC = P33 | IOSTANDARD = LVCMOS33 | PULLDOWN = YES; # input only
NET "XXX2" LOC = P35 | IOSTANDARD = LVCMOS33 | PULLDOWN = YES; # input only
*/