Problem with comparison.
| /Designs/Measuring_instruments/RMDS02D/CAD/src/terarium_pad.scad |
|---|
| 0,0 → 1,70 |
| x_size = 20; // horizontal outer size of the aquarium pedestal. |
| y_size = 20; // |
| thickness = 10; // thickness of the pad bellow aquarium. hairs lenght is 12mm. |
| rim_height = 7; // height of upper rim for fixing the aquarium in position. |
| mount_hole = 3.5; |
| clear = 0.175; |
| // aquarium pad |
| difference () { |
| intersection() { |
| union(){ // bottom part with rim/fixing pin |
| rotate([0,0,45]) |
| cube([x_size, y_size ,thickness], center = true); |
| translate ([sqrt(pow(x_size,2) + pow(x_size,2))/4, sqrt(pow(x_size,2) + pow(x_size,2))/4, thickness/2 + rim_height/2]) |
| cube([sqrt(pow(x_size,2) + pow(x_size,2))/2, sqrt(pow(x_size,2) + pow(x_size,2))/2, rim_height], center = true); |
| }; |
| rotate([0,0,45]) |
| cube([x_size, y_size ,4*thickness], center = true); |
| } |
| cylinder (h = thickness + rim_height, r= mount_hole, $fn=20); // hole for screw head |
| translate ([0, 0, -thickness]) // hole for the screw |
| cylinder (h = thickness + rim_height, r= mount_hole/2, $fn=10); |
| rotate([0,0,-45]) // hole for top part mounting nut |
| translate ([ 0, -x_size/3, thickness/3]) |
| cube([5.5, 2.5, thickness], center = true); |
| rotate([90,0,-45]) // hole for top part mounting screw. |
| translate ([ 0, thickness/4, 0]) |
| cylinder (h = thickness + rim_height, r= mount_hole/2, $fn=10); |
| } |
| translate ([0, 0, 3*thickness]) // separate two parts |
| //Top part |
| difference () { |
| rotate([0,0,-45]) |
| translate ([0, -3, rim_height/3]) |
| cube([x_size, y_size ,thickness + rim_height/4 ], center = true); |
| rotate([90,0,-45]) |
| translate ([0, 0, rim_height/3]) |
| minkowski() { |
| cube([0.5,3,10]); |
| cylinder(r=1.5,h=1,$fn=50); |
| } |
| wall_thickness = 2; |
| union(){ // copy of bottom part |
| rotate([0,0,45]) |
| cube([x_size, y_size ,thickness], center = true); |
| translate ([sqrt(pow(x_size,2) + pow(x_size,2))/4 -wall_thickness, sqrt(pow(x_size,2) + pow(x_size,2))/4 -wall_thickness, thickness/2 + rim_height/2]) |
| cube([sqrt(pow(x_size,2) + pow(x_size,2))/2, sqrt(pow(x_size,2) + pow(x_size,2))/2, rim_height], center = true); |
| }; |
| } |
| /Designs/Measuring_instruments/RMDS02D/CAD/src/Enclosure_pedestal.scad |
|---|
| 0,0 → 1,15 |
| pedestal_height = 130; // height of pedestal |
| x_size = 250; // horizontal outer size of the aquarium pedestal. |
| y_size = 300; // |
| thickness = 10; // thickness of walls |
| rim_height = 10; // height of upper rim for fixing the aquarium in position. |
| difference () { |
| cube([x_size, y_size ,pedestal_height]); |
| translate ([thickness, thickness, pedestal_height - rim_height) |
| cube([x_size - 2* thickness, y_size - 2* thickness, thickness]); |
| cube([x_size - 2* thickness, y_size - 2* thickness, pedestal_height - rim_height - thickness]); |
| } |
| /Designs/Measuring_instruments/RMDS02D/DOC/SRC/img/RMDS02D_station.jpg |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /Designs/Measuring_instruments/RMDS02D/PrjInfo.txt |
|---|
| 0,0 → 1,16 |
| [InfoShortDescription.en] |
| Radio Meteor Detection Station with GPS |
| [InfoShortDescription.cs] |
| Stanice pro radiovou detekci meteorů s GPS |
| [InfoLongDescription.en] |
| Radio meteor trail detection set. It is upgraded by GPS time and frequency synchronization to determining itner-station reflection variation and doppler shift. Station computer is single board ARM computer. Signal is digitalised by SDR-Widget and power supply system is improved. |
| [InfoLongDescription.cs] |
| Set pro radiovou detekci meteorů. Je rozšířen o časovou synchronizaci a kmitočtovou stabilizaci LO k určení variací a doplerovského posunu odrazu přijatého několika stanicemi. Staniční počítač je jednodeskový ARM signál je digitalizován konstrukcí SDR-Widget a je vylepšen systém napájecích zdrojů. |
| [End] |
| /Designs/Measuring_instruments/RMDS02D/RMDS02D_Small.JPG |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /Designs/Measuring_instruments/RMDS02D/SCH/RMDS02D_system.dia |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |