/Designs/ROBOTS/TEFO01B/CAD/TEFO01B_BOX01A/CAD/print_data/TEFO01B_BOX01A.scad
File deleted
/Designs/ROBOTS/TEFO01B/CAD/TEFO01B_BOX01A/CAD/print_data/TEFO01B_BOX01A_PLBASE_bottom.scad
0,0 → 1,16
use <../configuration/celicko.scad>
use <../configuration/sloupek.scad>
use <../configuration/lista.scad>
use <../configuration/plbase.scad>
use <../uravena_celicka.scad>
 
 
include <../configuration/manufactury_conf.scad>
include <../configuration.scad>
 
 
//plbase s nožičkama
plbase_s_nozickama(pocet_der1+3,pocet_der2+3,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,tloustka_plbase,prekryti_der,vyska_nozicky,vyska_hlavy,prumer_hlavy);
 
 
 
/Designs/ROBOTS/TEFO01B/CAD/TEFO01B_BOX01A/CAD/print_data/TEFO01B_BOX01A_plate1.scad
0,0 → 1,42
use <../configuration/celicko.scad>
use <../configuration/sloupek.scad>
use <../configuration/lista.scad>
use <../uravena_celicka.scad>
 
 
include <../configuration/manufactury_conf.scad>
include <../configuration.scad>
 
 
 
banister_color = "cyan";
slat_color = "red";
 
/*
// box banisters
color(banister_color)
translate([(-(pocet_der2+2)*vzdalenost_der)/2,0,0])
rotate(a=[90,0,0])
sloupek (vyska,zapust1,vzdalenost_der,vzdalenost_od_okraje,vzdalenost_od_diry,radidus_hrany,prumer_sroubu,prumer_matice,vyska_matice,posuv_dorazu,matice_sila_materialu);
*/
 
// box slats
color(slat_color)
translate([0,0,0])
rotate(a=[0,0,0])
lista (vzdalenost_der,pocet_der2,vzdalenost_od_okraje,vzdalenost_od_diry,vzdalenost_1,vzdalenost_2, zapust,vyska_listy,tloustka_celicka,sirka_materialu,vyska_hlavy,prumer_hlavy,prumer_sroubu,prumer_matice,vyska_matice,posuv_dorazu,matice_sila_materialu);
 
color(slat_color)
translate([0,20,0])
rotate(a=[0,0,0])
lista (vzdalenost_der,pocet_der2,vzdalenost_od_okraje,vzdalenost_od_diry,vzdalenost_1,vzdalenost_2, zapust,vyska_listy,tloustka_celicka,sirka_materialu,vyska_hlavy,prumer_hlavy,prumer_sroubu,prumer_matice,vyska_matice,posuv_dorazu,matice_sila_materialu);
 
color(slat_color)
translate([0,-20,0])
rotate(a=[0,0,0])
lista (vzdalenost_der,pocet_der2,vzdalenost_od_okraje,vzdalenost_od_diry,vzdalenost_1,vzdalenost_2, zapust,vyska_listy,tloustka_celicka,sirka_materialu,vyska_hlavy,prumer_hlavy,prumer_sroubu,prumer_matice,vyska_matice,posuv_dorazu,matice_sila_materialu);
color(slat_color)
translate([0,-40,0])
rotate(a=[0,0,0])
lista (vzdalenost_der,pocet_der2,vzdalenost_od_okraje,vzdalenost_od_diry,vzdalenost_1,vzdalenost_2, zapust,vyska_listy,tloustka_celicka,sirka_materialu,vyska_hlavy,prumer_hlavy,prumer_sroubu,prumer_matice,vyska_matice,posuv_dorazu,matice_sila_materialu);
/Designs/ROBOTS/TEFO01B/CAD/TEFO01B_BOX01A/CAD/print_data/TEFO01B_BOX01A_plate2.scad
0,0 → 1,38
use <../configuration/celicko.scad>
use <../configuration/sloupek.scad>
use <../configuration/lista.scad>
use <../uravena_celicka.scad>
 
 
include <../configuration/manufactury_conf.scad>
include <../configuration.scad>
 
 
 
banister_color = "cyan";
slat_color = "red";
 
/*
// box banisters
color(banister_color)
translate([(-(pocet_der2+2)*vzdalenost_der)/2,0,0])
rotate(a=[90,0,0])
sloupek (vyska,zapust1,vzdalenost_der,vzdalenost_od_okraje,vzdalenost_od_diry,radidus_hrany,prumer_sroubu,prumer_matice,vyska_matice,posuv_dorazu,matice_sila_materialu);
*/
 
// box slats
color(slat_color)
translate([0,0,0])
lista (vzdalenost_der,pocet_der1,vzdalenost_od_okraje,vzdalenost_od_diry,vzdalenost_1,vzdalenost_2, zapust,vyska_listy,tloustka_celicka,sirka_materialu,vyska_hlavy,prumer_hlavy,prumer_sroubu,prumer_matice,vyska_matice,posuv_dorazu,matice_sila_materialu);
 
color(slat_color)
translate([0,20,0])
lista (vzdalenost_der,pocet_der1,vzdalenost_od_okraje,vzdalenost_od_diry,vzdalenost_1,vzdalenost_2, zapust,vyska_listy,tloustka_celicka,sirka_materialu,vyska_hlavy,prumer_hlavy,prumer_sroubu,prumer_matice,vyska_matice,posuv_dorazu,matice_sila_materialu);
 
color(slat_color)
translate([0,-20,0])
lista (vzdalenost_der,pocet_der1,vzdalenost_od_okraje,vzdalenost_od_diry,vzdalenost_1,vzdalenost_2, zapust,vyska_listy,tloustka_celicka,sirka_materialu,vyska_hlavy,prumer_hlavy,prumer_sroubu,prumer_matice,vyska_matice,posuv_dorazu,matice_sila_materialu);
color(slat_color)
translate([0,-40,0])
lista (vzdalenost_der,pocet_der1,vzdalenost_od_okraje,vzdalenost_od_diry,vzdalenost_1,vzdalenost_2, zapust,vyska_listy,tloustka_celicka,sirka_materialu,vyska_hlavy,prumer_hlavy,prumer_sroubu,prumer_matice,vyska_matice,posuv_dorazu,matice_sila_materialu);
/Designs/ROBOTS/TEFO01B/CAD/TEFO01B_BOX01A/CAD/print_data/TEFO01B_BOX01A_plate3.scad
0,0 → 1,29
use <../configuration/celicko.scad>
use <../configuration/sloupek.scad>
use <../configuration/lista.scad>
use <../configuration/plbase.scad>
use <../uravena_celicka.scad>
 
 
include <../configuration/manufactury_conf.scad>
include <../configuration.scad>
 
barva_predni = "cyan";
barva_zadni = "red";
 
 
//celicko predni
//--------------------------------------------------------------
translate([0,-(10+vyska),0])
color(barva_predni)
rotate(a=[-90,0,0])
 
celicko_predni (vyska,zapust,vule_vysky_celicka,pocet_der2,vzdalenost_der,vule_delky_celicka,tloustka_celicka,vule_tlousky);
 
//celicko zadni
//--------------------------------------------------------------
translate([0,(10+vyska),0])
color(barva_zadni)
rotate(a=[-90,0,180])
 
celicko_zadni (vyska,zapust,vule_vysky_celicka,pocet_der2,vzdalenost_der,vule_delky_celicka,tloustka_celicka,vule_tlousky);
/Designs/ROBOTS/TEFO01B/CAD/TEFO01B_BOX01A/CAD/print_data/TEFO01B_BOX01A_plate4.scad
0,0 → 1,31
use <../configuration/celicko.scad>
use <../configuration/sloupek.scad>
use <../configuration/lista.scad>
use <../configuration/plbase.scad>
use <../uravena_celicka.scad>
 
 
include <../configuration/manufactury_conf.scad>
include <../configuration.scad>
 
barva_leve = "green";
barva_prave = "yellow";
 
 
//celicko prave
//-----------------------------------------------------------
color(barva_prave)
translate([vyska+10,0,0])
rotate(a=[-90,0,90])
 
celicko_prave (vyska,zapust,vule_vysky_celicka,pocet_der1,vzdalenost_der,vule_delky_celicka,tloustka_celicka,vule_tlousky);
//*/
 
 
//celicko leve
//-----------------------------------------------------------
color(barva_leve)
translate([-(vyska+10),0,0])
rotate(a=[-90,0,270])
 
celicko_leve (vyska,zapust,vule_vysky_celicka,pocet_der1,vzdalenost_der,vule_delky_celicka,tloustka_celicka,vule_tlousky);
/Designs/ROBOTS/TEFO01B/CAD/TEFO01B_BOX01A/CAD/print_data/TEFO01B_BOX01A_upright.scad
0,0 → 1,43
use <../configuration/celicko.scad>
use <../configuration/sloupek.scad>
use <../configuration/lista.scad>
use <../configuration/plbase.scad>
use <../uravena_celicka.scad>
 
 
include <../configuration/manufactury_conf.scad>
include <../configuration.scad>
 
barva_sloupku = "green";
 
vzdalenost_mezi_sloupky=5;
 
//SLOUPKY
//------------------------------------------------------------
//sloupek 1
color(barva_sloupku)
rotate(a=[90,0,0])
translate([-(2*(3/2*vzdalenost_der)+vzdalenost_od_okraje)-3/2*vzdalenost_mezi_sloupky,0,0])
translate([0,vzdalenost_od_okraje,0])
sloupek (vyska,zapust1,vzdalenost_der,vzdalenost_od_okraje,vzdalenost_od_diry,radidus_hrany,prumer_sroubu,prumer_matice,vyska_matice,posuv_dorazu,matice_sila_materialu,logo_vyska,logo_sirka);
//sloupek 2
color(barva_sloupku)
rotate(a=[90,0,0])
translate([-3/2*vzdalenost_der-vzdalenost_mezi_sloupky/2,0,0])
translate([0,vzdalenost_od_okraje,0])
sloupek (vyska,zapust1,vzdalenost_der,vzdalenost_od_okraje,vzdalenost_od_diry,radidus_hrany,prumer_sroubu,prumer_matice,vyska_matice,posuv_dorazu,matice_sila_materialu,logo_vyska,logo_sirka);
 
//sloupek 3
color(barva_sloupku)
rotate(a=[90,0,0])
translate([vzdalenost_od_okraje+vzdalenost_mezi_sloupky/2,0,0])
translate([0,vzdalenost_od_okraje,0])
sloupek (vyska,zapust1,vzdalenost_der,vzdalenost_od_okraje,vzdalenost_od_diry,radidus_hrany,prumer_sroubu,prumer_matice,vyska_matice,posuv_dorazu,matice_sila_materialu,logo_vyska,logo_sirka);
//sloupek 4
color(barva_sloupku)
rotate(a=[90,0,0])
translate([2*vzdalenost_od_okraje+3/2*vzdalenost_mezi_sloupky+3/2*vzdalenost_der,0,0])
translate([0,vzdalenost_od_okraje,0])
sloupek (vyska,zapust1,vzdalenost_der,vzdalenost_od_okraje,vzdalenost_od_diry,radidus_hrany,prumer_sroubu,prumer_matice,vyska_matice,posuv_dorazu,matice_sila_materialu,logo_vyska,logo_sirka);
/Designs/ROBOTS/TEFO01B/CAD/TEFO01B_BOX01A/CAD/configuration/celicko.scad
0,0 → 1,11
//Funkce generujici plne celicko
module celicko (vyska,zapust,vule_vysky_celicka,pocet_der,vzdalenost_der,vule_delky_celicka,tloustka_celicka,vule_tlousky,vyska_listy) {
difference () {
color("cyan")
translate([0, 0, 0])
linear_extrude(height = vyska-2*zapust-vule_vysky_celicka)
square([(pocet_der-1)*vzdalenost_der-vule_delky_celicka, tloustka_celicka-vule_tlousky], center = true);
}
}
 
 
/Designs/ROBOTS/TEFO01B/CAD/TEFO01B_BOX01A/CAD/uravena_celicka.scad
0,0 → 1,99
use <configuration/celicko.scad>
use <configuration/sloupek.scad>
use <configuration/lista.scad>
use <configuration/plbase.scad>
use <uravena_celicka.scad>
use <configuration/otvory.scad>
 
include <configuration/manufactury_conf.scad>
include <configuration.scad>
include <configuration/otvory_conf.scad>
 
//Slouzi pro vytvoreni vlastnich celicek dle potreby
 
//Vytvoreni predniho celicka krabicky
//--------------------------------------------------------
module celicko_predni()
difference() {
union() {
 
celicko (vyska,zapust,vule_vysky_celicka,pocet_der2,vzdalenost_der,vule_delky_celicka,tloustka_celicka,vule_tlousky,vyska_listy,vzdalenost_der_x,vzdalenost_der_y,prumer_otvoru,prumer_sloupku,ramecek_x,ramecek_y,ramecek_vyska);
}
}
 
 
 
 
//Vytvoreni zadniho celicka krabicky - cervena
//--------------------------------------------------------
module celicko_zadni()
{
translate([0,0,0])
difference() {
celicko (vyska,zapust,vule_vysky_celicka,pocet_der2,vzdalenost_der,vule_delky_celicka,tloustka_celicka,vule_tlousky,vyska_listy);
 
}
}
 
 
//Vytvoreni leveho celicka krabicky
//--------------------------------------------------------
module celicko_leve()
{
translate([0,0,0])
difference() {
celicko (vyska,zapust,vule_vysky_celicka,pocet_der1,vzdalenost_der,vule_delky_celicka,tloustka_celicka,vule_tlousky,vyska_listy);
posun_od_kraje1=1.5;
MIC338(tloustka_celicka,vyska,zapust,vule_vysky_celicka,posun_od_kraje1,vzdalenost_der);
posun_od_kraje2=-1.5;
MIC338(tloustka_celicka,vyska,zapust,vule_vysky_celicka,posun_od_kraje2,vzdalenost_der);
 
}
}
 
 
 
//Vytvoreni praveho celicka krabicky
//--------------------------------------------------------
module celicko_prave()
{
translate([0,0,0])
difference() {
celicko (vyska,zapust,vule_vysky_celicka,pocet_der1,vzdalenost_der,vule_delky_celicka,tloustka_celicka,vule_tlousky,vyska_listy);
posun_od_kraje3=0;
pocet_der_dane_strany1=pocet_der1+3;
I2CDIFF01A(tloustka_celicka,pocet_der_dane_strany1,posun_od_kraje3,vzdalenost_der,vyska_listy);
 
}
}
barva_predni = "cyan";
barva_zadni = "red";
barva_leve = "green";
barva_prave = "yellow";
 
//Zobrazeni vzhledu navrhovanych celicek
color(barva_predni)
translate([0,-50,0])
celicko_predni();
 
color(barva_zadni)
translate([0,50,0])
rotate(a=[0,0,180])
celicko_zadni();
 
color(barva_leve)
translate([-60,0,0])
rotate(a=[0,0,270])
celicko_leve();
 
color(barva_prave)
translate([60,0,0])
rotate(a=[0,0,90])
celicko_prave();