| /Designs/ROBOTS/TEFO01B/CAD/TEFO01B_BOX02A_USB/CAD/assembly.scad |
|---|
| 1,6 → 1,7 |
| use <configuration/sloupek.scad> |
| use <configuration/plbase.scad> |
| use <configuration/bocnice.scad> |
| use <configuration/spodni_kryt.scad> |
| use <configuration/otvory.scad> |
| use <configuration/text/Write.scad> |
| use <upravena_bocnice.scad> |
| 42,6 → 43,8 |
| plbase_vrchni_kryt_pro_odecet(pocet_der1-1,pocet_der2-1,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice,-0.2,tloustka_plbase); |
| } |
| translate([0,0,-vyska_bocnice/2-2*tloustka_plbase]) |
| spodni_kryt(pocet_der1-1,pocet_der2-1,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice); |
| 49,5 → 52,3 |
| /Designs/ROBOTS/TEFO01B/CAD/TEFO01B_BOX02A_USB/CAD/configuration/manufactury_conf.scad |
|---|
| 22,6 → 22,10 |
| vzdalenost_od_diry = 5; //vzdalenost od stredu upevnovaci diry na druhou stranu |
| //Spodní Kryt |
| vyska_prekryti_spodni=3; |
| vyska_prekryti_vrchni=4; |
| prekryti_tolerance=0.6; |
| tolerance_na_nasunuti=0.3; |
| sila_spodniho_krytu=1; |
| /Designs/ROBOTS/TEFO01B/CAD/TEFO01B_BOX02A_USB/CAD/configuration/plbase.scad |
|---|
| 197,8 → 197,33 |
| } |
| } |
| //PLBASE ZAKLADNI - bez der |
| //------------------------------------------------------------ |
| module plbase_bez_der(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,tloustka_plbase,prekryti_der,tloustka_bocnice){ |
| difference () { |
| //union () { |
| translate([radidus_hrany,radidus_hrany,0]) |
| minkowski() |
| { |
| cube([(pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*tloustka_bocnice,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*tloustka_bocnice,tloustka_plbase]); // base plastics brick |
| cylinder(r=radidus_hrany,h=0.1); |
| } |
| } |
| } |
| //PLbase vrchní |
| //------------------------------------------------------------ |
| /Designs/ROBOTS/TEFO01B/CAD/TEFO01B_BOX02A_USB/CAD/print_data/TEFO01B_BOX02A_USB_kryt.scad |
|---|
| 0,0 → 1,16 |
| use <../configuration/spodni_kryt.scad> |
| include <../configuration/manufactury_conf.scad> |
| include <../configuration.scad> |
| translate([0,0,tloustka_plbase/2]) |
| rotate(a=[0,0,0]) |
| { |
| spodni_kryt(pocet_der1-1,pocet_der2-1,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice); |
| } |