WebSVN – MLAB – /Modules/ Rev 4489 and /Modules/ Rev 4490 – Path Comparison

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R04.scad
2,7 → 2,7
include <../configuration.scad>

//dilec do loziska
module WINDGAUGE02A_R04 (lozisko_prumer_vnitrni,lozisko_prekryv,S01_sila_materialu,prumer_sroubu)
module WINDGAUGE02A_R04 ()
{
difference()
{
11,18 → 11,14
{
translate([0,0,0])
cylinder (h = S01_sila_materialu, r=(lozisko_prumer_vnitrni+2*lozisko_prekryv)/2, center = true, $fn=100);

translate([0,0,S01_sila_materialu])
cylinder (h = S01_sila_materialu, r=(lozisko_prumer_vnitrni+2lozisko_prekryv+2S01_sila_materialu)/2, center = true, $fn=100);

translate([0,0,-2*S01_sila_materialu])
cylinder (h = lozisko_vyska, r=(lozisko_prumer_vnitrni/2), center = true, $fn=100);


}
translate([0,0,1/2*S01_sila_materialu-(lozisko_vyska)/2])
cylinder (h = 2*S01_sila_materialu+lozisko_vyska+0.1, r=((prumer_sroubu)/2), center = true, $fn=100);
cylinder (h = 2*S01_sila_materialu+lozisko_vyska+0.1, r=((prumer_osicky)/2), center = true, $fn=100);


}
}

WINDGAUGE02A_R04 (lozisko_prumer_vnitrni,lozisko_prekryv,S01_sila_materialu,prumer_sroubu);
WINDGAUGE02A_R04 ();

 /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R05.scad
 ,35 → 1,52
 $fn=40; // model faces resolution.
 include <../configuration.scad>
-module WINDGAUGE02A_R05(vyska_pod_magnetem,magnet_zapusteni,magnet_prumer,vyska_hlavy_sroubu,prumer_hlavy_sroubu,prumer_sroubu,vyska_matky,sirka_matky,R05_sirka_matky,S01_sila_materialu)
+module WINDGAUGE02A_R05()
     {
         //setihrana matice
           difference()
         {
+            union()
+            {
         //zakladni material
-            cylinder (h = 2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_zapusteni+vyska_matky, r= R05_sirka_matky/2, $fn=6);
+            cylinder (h = 2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky-senzor_vyska_IO-senzor_odstup_od_magnetu, r= R05_sirka_matky/2, $fn=6);
-         //dira na matku
-    cylinder (h = vyska_matky+0.2, r= (sirka_matky+0.2)/2, $fn=6);
+            translate([0,0,-S01_sila_materialu/2])
+    cylinder (h = S01_sila_materialu, r=(lozisko_prumer_vnitrni+2*lozisko_prekryv)/2, center = true, $fn=100);
+                }
         //otvor pro magnet
-            translate([0,0,(2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_zapusteni+vyska_matky)-magnet_zapusteni/2+0.01])
+            translate([0,0,(2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky-senzor_vyska_IO-senzor_odstup_od_magnetu)-magnet_zapusteni/2+0.01])
                 cylinder (h = magnet_zapusteni+0.01, r=((magnet_prumer+0.2)/2), center = true, $fn=100);
-        //zapusteni uchytného sroubu
-            translate([0,0,(2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_zapusteni+vyska_matky)-vyska_hlavy_sroubu/2+0.1])
-                cylinder (h = vyska_hlavy_sroubu+1, r=((prumer_hlavy_sroubu+0.2)/2), center = true, $fn=100);
-        //otvor pro sroub
-        translate([0,0,(2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_zapusteni+vyska_matky)/2+0.1])
-            cylinder (h = (2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_zapusteni+vyska_matky)+0.1, r=(prumer_sroubu)/2, center = true, $fn=100);
-        }
+ //otvor
+translate([0,0,-S01_sila_materialu])
+cylinder (h = 3*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky-senzor_vyska_IO-senzor_odstup_od_magnetu+0.1, r=prumer_osicky/2, $fn=100);
+                translate([0,0,S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky-senzor_vyska_IO-senzor_odstup_od_magnetu+0.1])
+         difference()
+        {
+            cylinder(  S01_sila_materialu,d1=3*R05_sirka_matky, d2=3*lozisko_prumer_vnitrni+2*lozisko_prekryv  );
+                cylinder(  S01_sila_materialu, d1=R05_sirka_matky,d2=lozisko_prumer_vnitrni+2*lozisko_prekryv  );
+    }
+     //spodní zakulacení
+           difference()
+        {
+            cylinder(  S01_sila_materialu, d1=3*lozisko_prumer_vnitrni+2*lozisko_prekryv,d2=3*R05_sirka_matky  );
+                cylinder(  S01_sila_materialu, d1=lozisko_prumer_vnitrni+2*lozisko_prekryv,d2=R05_sirka_matky  );
     }
+    }
+ }
+WINDGAUGE02A_R05();
-WINDGAUGE02A_R05(vyska_pod_magnetem,magnet_zapusteni,magnet_prumer,vyska_hlavy_sroubu,prumer_hlavy_sroubu,prumer_sroubu,vyska_matky,sirka_matky,R05_sirka_matky,S01_sila_materialu);

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_S01.scad
39,21 → 39,22
//otvor skrz
translate([0,0,S01_vyska_spodniho_zavitu+3*S01_sila_drzaku_RJ11-0.3])
cylinder (h = S01_vyska-S01_vyska_horni_zavit-(S01_vyska_spodniho_zavitu+3*S01_sila_drzaku_RJ11-0.3), r=(S01_prumer_vnitrni)/2, $fn=100);
cube(300); // cut to show internal relief

}
}


difference()
{
WINDGAUGE02A_S01();

cube(300); // cut to show internal relief

}







/*
module WINDGAUGE02A_S01(R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,S01_vyska_zuzene_casti,S01_vyska_na_elektroniku,S01_vyska_zavitu_na_nasroubovani_drzaku,S01_vyska_prechodu,vule_mezi_statorem_rotorem,S01_vyska_zavitu_na_nasroubovani_drzaku,S01_sila_materialu)
{

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_S02.scad
38,20 → 38,20
cylinder (h = S01_sila_materialu+0.01, r=(lozisko_prumer_vnitrni+0.2)/2+lozisko_prekryv, center = true, $fn=100);

//otvor na šroub 1
translate([-senzor_delka/2,-senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
translate([-senzor_delka/2,-senzor_sirka/2,(lozisko_vyska+2S01_sila_materialu+2S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky)/2])
cylinder (h = lozisko_vyska+2S01_sila_materialu+2S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);

//otvor na šroub 2
translate([senzor_delka/2,-senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
translate([senzor_delka/2,-senzor_sirka/2,(lozisko_vyska+2S01_sila_materialu+2S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky)/2])
cylinder (h = lozisko_vyska+2S01_sila_materialu+2S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);

//otvor na šroub 3
translate([senzor_delka/2,senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
translate([senzor_delka/2,senzor_sirka/2,(lozisko_vyska+2S01_sila_materialu+2S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky)/2])
cylinder (h = lozisko_vyska+2S01_sila_materialu+2S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);

//otvor na šroub 4
translate([-senzor_delka/2,senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
translate([-senzor_delka/2,senzor_sirka/2,(lozisko_vyska+2S01_sila_materialu+2S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky)/2])
cylinder (h = lozisko_vyska+2S01_sila_materialu+2S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);

}
translate([0,0,lozisko_vyska/2+S01_sila_materialu])

 /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_S04.scad
 ,0 → 1,27
+$fn=40; // model faces resolution.
+include <../configuration.scad>
+include <polyScrewThread_r1.scad>
+PI=3.141592;
+module WINDGAUGE02A_S04()
+    {
+ difference()
+        {
+translate([0,0,0])
+        cylinder (h = S01_sila_drzaku_RJ11, r=(S01_prumer_vnitrni)/2-S01_hloubka_zavitu/2+0.5, $fn=100);
+translate([0,0,S01_sila_drzaku_RJ11/2])
+cube([S01_hrana_A_RJ11,S01_hrana_B_RJ11,S01_sila_drzaku_RJ11+0.01],center=true);
+}
+}
+WINDGAUGE02A_S04();

/Modules/Mechanical/WINDGAUGE02A/CAD/configuration.scad
10,7 → 10,9
S01_sila_materialu=1.3;
S01_vyska_horni_zavit=10;
S01_vyska_spodniho_zavitu=10;
S01_sila_drzaku_RJ11=2;
S01_sila_drzaku_RJ11=2; //vyška drážky
S01_hrana_A_RJ11=15;
S01_hrana_B_RJ11=25;
S01_tolerance_zavit=1.5;
S01_mezera_mezi_statorem_rotorem=1.5;

67,16 → 69,16
L01_sila_materialu_lopatky=0.9;

//WINDGAUGE02A_D01 //uchyt velky
D01_material_pod_zavitem=10;
D01_material_za_zavitem=5;
D01_material_pred_zavitem=5;
D01_material_pod_zavitem=3;
D01_material_za_zavitem=3;
D01_material_pred_zavitem=2;
D01_delka_tyce=40;
D01_sirka_tyce=20;
D01_sirka_tyce=10;



//WINDGAUGE02A_D02 //uchyt na sloup
D02_sila_materialu=4;
D02_sila_materialu=2;
D02_vyska_uchytky=40;
D02_prumer_obruby=28;
D02_delka_celeho_uchytu=70;

 /Modules/Mechanical/WINDGAUGE02A/CAD/print_data/P_WINDGAUGE02A_D01.scad
 ,7 → 3,7
 use <../SRC/polyScrewThread_r1.scad>
-use <../SRC/WINDGAUGE02A_D02.scad>
+use <../SRC/WINDGAUGE02A_D01.scad>
 PI=3.141592;
 ,58 → 10,9
-module WINDGAUGE02A_D01(S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,D01_material_pod_zavitem,D01_material_za_zavitem,D01_material_pred_zavitem,D01_delka_tyce,D01_sirka_tyce,D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu)
-    {
-difference()
-        {
- union()
-   {
-       //zavit
-translate([0,0,D01_material_pod_zavitem])
- screw_thread(S01_prumer_zavitu-0.5,4,55,S01_vyska_komponentu_na_lozisko,PI/2,2);
-//spodní valec
-translate([0,0,D01_material_pod_zavitem/2])
-cylinder (h = D01_material_pod_zavitem, r=(S01_prumer_zavitu+D01_material_pred_zavitem*2)/2, center = true, $fn=100);
-//uchyt na tyc
-       translate([0,D01_delka_tyce/2+S01_prumer_zavitu/2+D01_material_pred_zavitem,D01_material_pod_zavitem/2])
- cube([D01_sirka_tyce,D01_delka_tyce,D01_material_pod_zavitem],center=true);
-//uchyt na tyc ovalna cast
-translate([0,S01_prumer_zavitu/2+D01_material_pred_zavitem,D01_material_pod_zavitem/2])
- cube([D01_sirka_tyce,D01_material_za_zavitem+D01_material_pred_zavitem,D01_material_pod_zavitem],center=true);
-//material kolem uchytu na sloupek
-  translate([0,D01_delka_tyce+S01_prumer_zavitu/2+D01_material_pred_zavitem+(D02_sila_materialu+D02_prumer_obruby/2)/2-D02_dotahova_vzdalenost,D01_material_pod_zavitem/2])
-difference()
-        {
-       cube([D01_sirka_tyce,D02_sila_materialu+D02_prumer_obruby/2,D01_material_pod_zavitem],center=true);
-       translate([0,D02_prumer_obruby/2-D02_dotahova_vzdalenost-D02_sila_materialu,0])
-        cylinder(h=D02_vyska_uchytky+0.01,r=D02_prumer_obruby/2,center=true);
-}
-//uchyt na sloupek
-       translate([0,D01_delka_tyce+S01_prumer_zavitu/2+D01_material_pred_zavitem+D02_sila_materialu+(D02_prumer_obruby)/2,D02_vyska_uchytky/2])
-        rotate(a=[0,0,270])
- WINDGAUGE02A_D02(D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu);
-}
-//otvor
-translate([0,0,(D01_material_pod_zavitem+S01_vyska_komponentu_na_lozisko)/2])
-cylinder (h = D01_material_pod_zavitem+S01_vyska_komponentu_na_lozisko+0.02, r=(S01_prumer_zavitu-2*D01_material_za_zavitem)/2, center = true, $fn=100);
- }
-    }
-WINDGAUGE02A_D01(S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,D01_material_pod_zavitem,D01_material_za_zavitem,D01_material_pred_zavitem,D01_delka_tyce,D01_sirka_tyce,D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu);
+WINDGAUGE02A_D01();

/Modules/Mechanical/WINDGAUGE02A/CAD/print_data/P_WINDGAUGE02A_L01.scad
8,4 → 8,4

rotate([0, 90, 0])

WINDGAUGE02A_L01(L01_hloubka_zapusteni,L01_hloubka_zapusteni_drzaku,L01_sila_zapusteni_drzaku,L01_hrana_drzaku_a,L01_hrana_drzaku_b,L01_tolerance_drzaku,L01_delka_uchytu,L01_prumer_lopatky,L01_sila_materialu_lopatky);
WINDGAUGE02A_L01();

/Modules/Mechanical/WINDGAUGE02A/CAD/print_data/P_WINDGAUGE02A_R01.scad
4,6 → 4,6

translate([0,0,(R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2])

WINDGAUGE02A_R01(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky,vule_mezi_statorem_rotorem,R01_vyska_preryti_statoru,R01_sila_materialu_pro_prekriti,S01_sila_materialu);
WINDGAUGE02A_R01();

/Modules/Mechanical/WINDGAUGE02A/CAD/print_data/P_WINDGAUGE02A_R02.scad
4,6 → 4,6

translate([0,0,(R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2])

WINDGAUGE02A_R02(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky);
WINDGAUGE02A_R02();

/Modules/Mechanical/WINDGAUGE02A/CAD/print_data/P_WINDGAUGE02A_R03.scad
4,6 → 4,6

translate([0,0,R02_sila_mateiralu_pod_lopatkami])

WINDGAUGE02A_R03(R03_sila_materialu,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,vule_mezi_statorem_rotorem,R01_sila_materialu_pro_prekriti,R02_sila_mateiralu_pod_lopatkami,S01_sila_materialu);
WINDGAUGE02A_R03();

/Modules/Mechanical/WINDGAUGE02A/CAD/print_data/P_WINDGAUGE02A_R04.scad
3,11 → 3,11

use <../SRC/WINDGAUGE02A_R04.scad>

//neni potřeba



translate([0,0,3/2*S01_sila_materialu])

rotate([0,180, 0])

WINDGAUGE02A_R04 (lozisko_prumer_vnitrni,lozisko_prekryv,S01_sila_materialu,prumer_sroubu);
//WINDGAUGE02A_R04 ();

 /Modules/Mechanical/WINDGAUGE02A/CAD/print_data/P_WINDGAUGE02A_S04.scad
 ,0 → 1,11
+$fn=100; // model faces resolution.
+include <../configuration.scad>
+use <../SRC/WINDGAUGE02A_S04.scad>
+use <../SRC/polyScrewThread_r1.scad>
+translate([0,0,0])
+rotate([0, 0, 0])
+WINDGAUGE02A_S04();

Subversion Repositories – MLAB

/Modules/ @ 4489 → /Modules/ @ 4490

Compare Path:	Rev
With Path:	Rev