Problem with comparison.
/Modules/ARM/ODROID-C1/CAD/src/ODROID-C1+_MLAB_breakout_frame.scad |
---|
0,0 → 1,109 |
use <./../../../../../Library/Graphics/MLAB_logo.scad> |
pedestal_height = 13; // designed for use the MLAB standard 12mm screws. |
mount_hole = 3.5; |
clear = 0.175; |
nut_size = 6.6; |
MLAB_grid_xoffset = 3.6; |
MLAB_grid_yoffset = 1.5; |
difference () { |
// translate ([-1,-16,0]) |
cube([58,87,pedestal_height]); |
//mount holes for ODROID |
translate ([4.5, 4.5,0]) |
cylinder (h = 6, r= (nut_size+clear)/2, $fn=6); |
translate ([4.5, 4.5, 6.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
translate ([4.5 + 49, 4.5,0]) |
cylinder (h = 6, r= (nut_size+clear)/2, $fn=6); |
translate ([4.5 + 49, 4.5, 6.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
translate ([4.5, 4.5 + 58,0]) |
cylinder (h = 6, r= (nut_size+clear)/2, $fn=6); |
translate ([4.5, 4.5 + 58, 6.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
translate ([4.5 + 49, 4.5 + 58,0]) |
cylinder (h = 6, r= (nut_size+clear)/2, $fn=6); |
translate ([4.5 + 49, 4.5 + 58, 6.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
//////////////////////////////////// |
translate ([1, 66 , pedestal_height - 4.5]) // HOLE for ODROD's USB and Ethernet connectors |
cube([54,15.5,5]); |
translate ([15, 14 , pedestal_height - 3.5]) // HOLE for ODROD's Passive components |
cube([35.5,46,5]); |
translate ([6, 31.5 , pedestal_height - 3.5]) // eMMc Card |
cube([14,20,5]); |
translate ([19, 54 , pedestal_height - 3.5]) // SD Card |
cube([30,20,5]); |
translate ([2, 8 , pedestal_height - 1.7]) // IO connector |
cube([4.5,50.5,5]); |
translate ([37,3, pedestal_height - 3]) // ODROID serial connector |
cube([10,2,5]); |
rotate([30,0,0]) |
translate ([15,5.8, -3.0]) // ODROID eMMC adapter pocket |
cube([25,2,15]); |
translate ([9,3.5, pedestal_height - 3]) // ODROID IR receiver |
cube([7.5,2,5]); |
translate ([19,10, pedestal_height - 5]) // Heatsink mount holes |
cylinder (h = 6, r= 3, $fn=10); |
translate ([39,61.6, pedestal_height - 5]) // Heatsink mount holes |
cylinder (h = 6, r= 3, $fn=10); |
//////////////////////////////////////// |
// MLAB grid holes |
for (j = [0 : 5], i = [1 : 5]) { |
translate ([MLAB_grid_xoffset + j*10.16, MLAB_grid_yoffset + i*10.16,0]) |
cylinder (h = 3, r= (nut_size+clear)/2, $fn=6); |
translate ([MLAB_grid_xoffset + j*10.16, MLAB_grid_yoffset + i*10.16, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
cylinder (h = pedestal_height /3, r= mount_hole/2, $fn=10); |
translate ([MLAB_grid_xoffset + j*10.16, MLAB_grid_yoffset + i*10.16, 6.0]) |
cylinder (h = 10, r= nut_size/2, $fn=6); |
} |
for (j = [0 : 5], i = [7 : 8]) { |
translate ([MLAB_grid_xoffset + j*10.16, MLAB_grid_yoffset + i*10.16,0]) |
cylinder (h = 3, r= (nut_size+clear)/2, $fn=6); |
translate ([MLAB_grid_xoffset + j*10.16, MLAB_grid_yoffset + i*10.16, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
cylinder (h = pedestal_height /3, r= mount_hole/2, $fn=10); |
translate ([MLAB_grid_xoffset + j*10.16, MLAB_grid_yoffset + i*10.16, 6.0]) |
cylinder (h = 10, r= nut_size/2, $fn=6); |
} |
//// lightening central holes |
translate ([9,16, 0]) // ODROIDs passive components hole. |
cube([40,43,pedestal_height ]); |
translate ([10,67, 0]) // ODROIDs passive components hole. |
cube([38,11,pedestal_height ]); |
// MLAB logo on the side |
union (){ |
translate ([29,0.5, 6.5]) // ODROIDs passive components hole. |
rotate ([90,0,0]) |
scale(v = [0.4, 0.4, 0.4]) |
MLAB_logo_long(); |
} |
} |
/Modules/ARM/ODROID-C1/CAD/src/ODROID-C1_MLAB_breakout_frame.scad |
---|
0,0 → 1,109 |
use <./../../../../../Library/Graphics/MLAB_logo.scad> |
pedestal_height = 13; // designed for use the MLAB standard 12mm screws. |
mount_hole = 3.5; |
clear = 0.175; |
nut_size = 6.6; |
MLAB_grid_xoffset = 3.6; |
MLAB_grid_yoffset = 1.5; |
difference () { |
// translate ([-1,-16,0]) |
cube([58,87,pedestal_height]); |
//mount holes for ODROID |
translate ([4.5, 4.5,0]) |
cylinder (h = 6, r= (nut_size+clear)/2, $fn=6); |
translate ([4.5, 4.5, 6.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
translate ([4.5 + 49, 4.5,0]) |
cylinder (h = 6, r= (nut_size+clear)/2, $fn=6); |
translate ([4.5 + 49, 4.5, 6.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
translate ([4.5, 4.5 + 58,0]) |
cylinder (h = 6, r= (nut_size+clear)/2, $fn=6); |
translate ([4.5, 4.5 + 58, 6.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
translate ([4.5 + 49, 4.5 + 58,0]) |
cylinder (h = 6, r= (nut_size+clear)/2, $fn=6); |
translate ([4.5 + 49, 4.5 + 58, 6.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
//////////////////////////////////// |
translate ([1, 66 , pedestal_height - 4.5]) // HOLE for ODROD's USB and Ethernet connectors |
cube([54,15.5,5]); |
translate ([15, 14 , pedestal_height - 3.5]) // HOLE for ODROD's Passive components |
cube([35.5,46,5]); |
translate ([6, 31.5 , pedestal_height - 3.5]) // eMMc Card |
cube([14,20,5]); |
translate ([19, 54 , pedestal_height - 3.5]) // SD Card |
cube([30,20,5]); |
translate ([2, 8 , pedestal_height - 1.7]) // IO connector |
cube([4.5,50.5,5]); |
translate ([37,3, pedestal_height - 3]) // ODROID serial connector |
cube([10,2,5]); |
rotate([30,0,0]) |
translate ([15,5.8, -3.0]) // ODROID eMMC adapter pocket |
cube([25,2,15]); |
translate ([9,3.5, pedestal_height - 3]) // ODROID IR receiver |
cube([7.5,2,5]); |
translate ([19,10, pedestal_height - 5]) // Heatsink mount holes |
cylinder (h = 6, r= 3, $fn=10); |
translate ([39,61.6, pedestal_height - 5]) // Heatsink mount holes |
cylinder (h = 6, r= 3, $fn=10); |
//////////////////////////////////////// |
// MLAB grid holes |
for (j = [0 : 5], i = [1 : 5]) { |
translate ([MLAB_grid_xoffset + j*10.16, MLAB_grid_yoffset + i*10.16,0]) |
cylinder (h = 3, r= (nut_size+clear)/2, $fn=6); |
translate ([MLAB_grid_xoffset + j*10.16, MLAB_grid_yoffset + i*10.16, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
cylinder (h = pedestal_height /3, r= mount_hole/2, $fn=10); |
translate ([MLAB_grid_xoffset + j*10.16, MLAB_grid_yoffset + i*10.16, 6.0]) |
cylinder (h = 10, r= nut_size/2, $fn=6); |
} |
for (j = [0 : 5], i = [7 : 8]) { |
translate ([MLAB_grid_xoffset + j*10.16, MLAB_grid_yoffset + i*10.16,0]) |
cylinder (h = 3, r= (nut_size+clear)/2, $fn=6); |
translate ([MLAB_grid_xoffset + j*10.16, MLAB_grid_yoffset + i*10.16, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
cylinder (h = pedestal_height /3, r= mount_hole/2, $fn=10); |
translate ([MLAB_grid_xoffset + j*10.16, MLAB_grid_yoffset + i*10.16, 6.0]) |
cylinder (h = 10, r= nut_size/2, $fn=6); |
} |
//// lightening central holes |
translate ([9,16, 0]) // ODROIDs passive components hole. |
cube([40,43,pedestal_height ]); |
translate ([10,67, 0]) // ODROIDs passive components hole. |
cube([38,11,pedestal_height ]); |
// MLAB logo on the side |
union (){ |
translate ([29,0.5, 6.5]) // ODROIDs passive components hole. |
rotate ([90,0,0]) |
scale(v = [0.4, 0.4, 0.4]) |
MLAB_logo_long(); |
} |
} |
/Modules/ARM/ODROID-C1/CAD/src/Cura_config.ini |
---|
0,0 → 1,259 |
[profile] |
layer_height = 0.3 |
wall_thickness = 0.8 |
retraction_enable = True |
solid_layer_thickness = 0.6 |
fill_density = 25 |
nozzle_size = 0.4 |
print_speed = 50 |
print_temperature = 212 |
print_temperature2 = 0 |
print_temperature3 = 0 |
print_temperature4 = 0 |
print_temperature5 = 0 |
print_bed_temperature = 55 |
support = None |
platform_adhesion = None |
support_dual_extrusion = Both |
wipe_tower = False |
wipe_tower_volume = 15 |
ooze_shield = False |
filament_diameter = 1,75 |
filament_diameter2 = 0 |
filament_diameter3 = 0 |
filament_diameter4 = 0 |
filament_diameter5 = 0 |
filament_flow = 100.0 |
retraction_speed = 40.0 |
retraction_amount = 4.5 |
retraction_dual_amount = 16.5 |
retraction_min_travel = 1.5 |
retraction_combing = All |
retraction_minimal_extrusion = 0.02 |
retraction_hop = 0.0 |
bottom_thickness = 0.3 |
layer0_width_factor = 200 |
object_sink = 0.0 |
overlap_dual = 0.15 |
travel_speed = 100 |
bottom_layer_speed = 20 |
infill_speed = 0.0 |
solidarea_speed = 0.0 |
inset0_speed = 0.0 |
insetx_speed = 0.0 |
cool_min_layer_time = 10 |
fan_enabled = True |
skirt_line_count = 1 |
skirt_gap = 3.0 |
skirt_minimal_length = 150.0 |
fan_full_height = 5.0 |
fan_speed = 100 |
fan_speed_max = 100 |
cool_min_feedrate = 10 |
cool_head_lift = False |
solid_top = True |
solid_bottom = True |
fill_overlap = 15 |
perimeter_before_infill = True |
support_type = Lines |
support_angle = 60 |
support_fill_rate = 15 |
support_xy_distance = 0.7 |
support_z_distance = 0.15 |
spiralize = False |
simple_mode = False |
brim_line_count = 20 |
raft_margin = 5.0 |
raft_line_spacing = 3.0 |
raft_base_thickness = 0.3 |
raft_base_linewidth = 1.0 |
raft_interface_thickness = 0.27 |
raft_interface_linewidth = 0.4 |
raft_airgap_all = 0.0 |
raft_airgap = 0.22 |
raft_surface_layers = 4 |
raft_surface_thickness = 0.27 |
raft_surface_linewidth = 0.4 |
fix_horrible_union_all_type_a = True |
fix_horrible_union_all_type_b = False |
fix_horrible_use_open_bits = False |
fix_horrible_extensive_stitching = False |
plugin_config = (lp1 |
. |
object_center_x = -1 |
object_center_y = -1 |
[alterations] |
start.gcode = ;Sliced at: {day} {date} {time} |
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} |
;Print time: {print_time} |
;Filament used: {filament_amount}m {filament_weight}g |
;Filament cost: {filament_cost} |
;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line |
;M109 S{print_temperature} ;Uncomment to add your own temperature line |
G21 ;metric values |
G90 ;absolute positioning |
M82 ;set extruder to absolute mode |
M107 ;start with the fan off |
G28 X0 Y0 ;move X/Y to min endstops |
G28 Z0 ;move Z to min endstops |
G1 Z15.0 F{travel_speed} ;move the platform down 15mm |
G92 E0 ;zero the extruded length |
G1 F200 E3 ;extrude 3mm of feed stock |
G92 E0 ;zero the extruded length again |
G1 F{travel_speed} |
;Put printing message on LCD screen |
M117 Printing... |
end.gcode = ;End GCode |
M104 S0 ;extruder heater off |
M140 S0 ;heated bed heater off (if you have it) |
G91 ;relative positioning |
G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure |
G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more |
G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way |
M84 ;steppers off |
G90 ;absolute positioning |
;{profile_string} |
start2.gcode = ;Sliced at: {day} {date} {time} |
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} |
;Print time: {print_time} |
;Filament used: {filament_amount}m {filament_weight}g |
;Filament cost: {filament_cost} |
;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line |
;M104 S{print_temperature} ;Uncomment to add your own temperature line |
;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line |
;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line |
G21 ;metric values |
G90 ;absolute positioning |
M107 ;start with the fan off |
G28 X0 Y0 ;move X/Y to min endstops |
G28 Z0 ;move Z to min endstops |
G1 Z15.0 F{travel_speed} ;move the platform down 15mm |
T1 ;Switch to the 2nd extruder |
G92 E0 ;zero the extruded length |
G1 F200 E10 ;extrude 10mm of feed stock |
G92 E0 ;zero the extruded length again |
G1 F200 E-{retraction_dual_amount} |
T0 ;Switch to the first extruder |
G92 E0 ;zero the extruded length |
G1 F200 E10 ;extrude 10mm of feed stock |
G92 E0 ;zero the extruded length again |
G1 F{travel_speed} |
;Put printing message on LCD screen |
M117 Printing... |
end2.gcode = ;End GCode |
M104 T0 S0 ;extruder heater off |
M104 T1 S0 ;extruder heater off |
M140 S0 ;heated bed heater off (if you have it) |
G91 ;relative positioning |
G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure |
G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more |
G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way |
M84 ;steppers off |
G90 ;absolute positioning |
;{profile_string} |
start3.gcode = ;Sliced at: {day} {date} {time} |
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} |
;Print time: {print_time} |
;Filament used: {filament_amount}m {filament_weight}g |
;Filament cost: {filament_cost} |
;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line |
;M104 S{print_temperature} ;Uncomment to add your own temperature line |
;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line |
;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line |
G21 ;metric values |
G90 ;absolute positioning |
M107 ;start with the fan off |
G28 X0 Y0 ;move X/Y to min endstops |
G28 Z0 ;move Z to min endstops |
G1 Z15.0 F{travel_speed} ;move the platform down 15mm |
T2 ;Switch to the 3rd extruder |
G92 E0 ;zero the extruded length |
G1 F200 E10 ;extrude 10mm of feed stock |
G92 E0 ;zero the extruded length again |
G1 F200 E-{retraction_dual_amount} |
T1 ;Switch to the 2nd extruder |
G92 E0 ;zero the extruded length |
G1 F200 E10 ;extrude 10mm of feed stock |
G92 E0 ;zero the extruded length again |
G1 F200 E-{retraction_dual_amount} |
T0 ;Switch to the first extruder |
G92 E0 ;zero the extruded length |
G1 F200 E10 ;extrude 10mm of feed stock |
G92 E0 ;zero the extruded length again |
G1 F{travel_speed} |
;Put printing message on LCD screen |
M117 Printing... |
end3.gcode = ;End GCode |
M104 T0 S0 ;extruder heater off |
M104 T1 S0 ;extruder heater off |
M104 T2 S0 ;extruder heater off |
M140 S0 ;heated bed heater off (if you have it) |
G91 ;relative positioning |
G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure |
G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more |
G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way |
M84 ;steppers off |
G90 ;absolute positioning |
;{profile_string} |
start4.gcode = ;Sliced at: {day} {date} {time} |
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} |
;Print time: {print_time} |
;Filament used: {filament_amount}m {filament_weight}g |
;Filament cost: {filament_cost} |
;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line |
;M104 S{print_temperature} ;Uncomment to add your own temperature line |
;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line |
;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line |
;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line |
G21 ;metric values |
G90 ;absolute positioning |
M107 ;start with the fan off |
G28 X0 Y0 ;move X/Y to min endstops |
G28 Z0 ;move Z to min endstops |
G1 Z15.0 F{travel_speed} ;move the platform down 15mm |
T3 ;Switch to the 4th extruder |
G92 E0 ;zero the extruded length |
G1 F200 E10 ;extrude 10mm of feed stock |
G92 E0 ;zero the extruded length again |
G1 F200 E-{retraction_dual_amount} |
T2 ;Switch to the 3rd extruder |
G92 E0 ;zero the extruded length |
G1 F200 E10 ;extrude 10mm of feed stock |
G92 E0 ;zero the extruded length again |
G1 F200 E-{retraction_dual_amount} |
T1 ;Switch to the 2nd extruder |
G92 E0 ;zero the extruded length |
G1 F200 E10 ;extrude 10mm of feed stock |
G92 E0 ;zero the extruded length again |
G1 F200 E-{retraction_dual_amount} |
T0 ;Switch to the first extruder |
G92 E0 ;zero the extruded length |
G1 F200 E10 ;extrude 10mm of feed stock |
G92 E0 ;zero the extruded length again |
G1 F{travel_speed} |
;Put printing message on LCD screen |
M117 Printing... |
end4.gcode = ;End GCode |
M104 T0 S0 ;extruder heater off |
M104 T1 S0 ;extruder heater off |
M104 T2 S0 ;extruder heater off |
M104 T3 S0 ;extruder heater off |
M140 S0 ;heated bed heater off (if you have it) |
G91 ;relative positioning |
G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure |
G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more |
G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way |
M84 ;steppers off |
G90 ;absolute positioning |
;{profile_string} |
support_start.gcode = |
support_end.gcode = |
cool_start.gcode = |
cool_end.gcode = |
replace.csv = |
preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. |
;This code is added before the T(n) |
postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. |
;This code is added after the T(n) |
/Modules/ARM/ODROID-C1/CAD/src/slic3r_config.ini |
---|
0,0 → 1,131 |
# generated by Slic3r 1.2.8 on Wed Jun 10 23:17:41 2015 |
avoid_crossing_perimeters = 0 |
bed_shape = 0x0,180x0,180x180,0x180 |
bed_temperature = 50 |
before_layer_gcode = |
bottom_solid_layers = 3 |
bridge_acceleration = 1000 |
bridge_fan_speed = 100 |
bridge_flow_ratio = 1 |
bridge_speed = 5 |
brim_width = 0 |
complete_objects = 0 |
cooling = 1 |
default_acceleration = 500 |
disable_fan_first_layers = 1 |
dont_support_bridges = 1 |
duplicate_distance = 6 |
end_gcode = M104 S0 ; turn off nozzle\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nG1 Y170 F3000 ; move the print to the front\nM84 ; disable motors\n |
external_fill_pattern = rectilinear |
external_perimeter_extrusion_width = 0 |
external_perimeter_speed = 90% |
external_perimeters_first = 0 |
extra_perimeters = 1 |
extruder_clearance_height = 20 |
extruder_clearance_radius = 20 |
extruder_offset = 0x0 |
extrusion_axis = E |
extrusion_multiplier = 1 |
extrusion_width = 0 |
fan_always_on = 1 |
fan_below_layer_time = 60 |
filament_colour = #FFFFFF |
filament_diameter = 1.75 |
fill_angle = 45 |
fill_density = 15% |
fill_pattern = honeycomb |
first_layer_acceleration = 500 |
first_layer_bed_temperature = 60 |
first_layer_extrusion_width = 180% |
first_layer_height = 0.3 |
first_layer_speed = 60% |
first_layer_temperature = 212 |
gap_fill_speed = 10 |
gcode_arcs = 0 |
gcode_comments = 0 |
gcode_flavor = reprap |
infill_acceleration = 500 |
infill_every_layers = 1 |
infill_extruder = 1 |
infill_extrusion_width = 0 |
infill_first = 0 |
infill_only_where_needed = 0 |
infill_overlap = 15% |
infill_speed = 60 |
interface_shells = 0 |
layer_gcode = |
layer_height = 0.3 |
max_fan_speed = 100 |
max_print_speed = 80 |
max_volumetric_speed = 0 |
min_fan_speed = 100 |
min_print_speed = 10 |
min_skirt_length = 0 |
notes = |
nozzle_diameter = 0.4 |
octoprint_apikey = 330CC1C393FC4CD08C420E476D472A7E |
octoprint_host = 192.168.1.25 |
only_retract_when_crossing_perimeters = 1 |
ooze_prevention = 0 |
output_filename_format = [input_filename_base].gcode |
overhangs = 1 |
perimeter_acceleration = 500 |
perimeter_extruder = 1 |
perimeter_extrusion_width = 0 |
perimeter_speed = 45 |
perimeters = 2 |
post_process = |
pressure_advance = 0 |
raft_layers = 0 |
resolution = 0 |
retract_before_travel = 2 |
retract_layer_change = 1 |
retract_length = 1.3 |
retract_length_toolchange = 3 |
retract_lift = 0 |
retract_restart_extra = 0 |
retract_restart_extra_toolchange = 0 |
retract_speed = 60 |
seam_position = aligned |
skirt_distance = 10 |
skirt_height = 1 |
skirts = 2 |
slowdown_below_layer_time = 30 |
small_perimeter_speed = 30 |
solid_infill_below_area = 70 |
solid_infill_every_layers = 0 |
solid_infill_extruder = 1 |
solid_infill_extrusion_width = 0 |
solid_infill_speed = 55 |
spiral_vase = 0 |
standby_temperature_delta = -5 |
start_gcode = G28 ; home all axes\nG92 E0.0 ; reset extruder |
support_material = 0 |
support_material_angle = 0 |
support_material_contact_distance = 0.2 |
support_material_enforce_layers = 0 |
support_material_extruder = 1 |
support_material_extrusion_width = 0 |
support_material_interface_extruder = 1 |
support_material_interface_layers = 0 |
support_material_interface_spacing = 0 |
support_material_interface_speed = 100% |
support_material_pattern = rectilinear |
support_material_spacing = 2.5 |
support_material_speed = 60 |
support_material_threshold = 0 |
temperature = 212 |
thin_walls = 1 |
threads = 4 |
toolchange_gcode = |
top_infill_extrusion_width = 0 |
top_solid_infill_speed = 50 |
top_solid_layers = 3 |
travel_speed = 130 |
use_firmware_retraction = 0 |
use_relative_e_distances = 1 |
use_volumetric_e = 0 |
vibration_limit = 0 |
wipe = 1 |
xy_size_compensation = 0 |
z_offset = 0 |