/Modules/ARM/Raspberry/RPi3/CAD/Raspi3_breakout_frame.stl
File deleted
/Modules/ARM/Raspberry/RPi3/CAD/src/Raspi3_breakout_frame.scad
1,98 → 1,74
use <./../../../../../../Library/Graphics/MLAB_logo.scad>
 
pedestal_height = 13; // designed for use the MLAB standard 12mm screws.
x_size = 87;
y_size = 58;
mount_hole = 3.5;
clear = 0.175;
nut_size = 6.6;
nut_size = 6.8;
nut_size25 = 6.1;
MLAB_grid = 10.16;
 
MLAB_grid_xoffset = 3.6;
MLAB_grid_yoffset = 1.5;
x_holes = floor(x_size / MLAB_grid);
y_holes = floor(y_size / MLAB_grid);
 
MLAB_grid_xoffset = (x_size - (x_holes * MLAB_grid))/2;
MLAB_grid_yoffset = (y_size - (y_holes * MLAB_grid))/2;
 
difference () {
// translate ([-1,-16,0])
cube([58,87,pedestal_height]);
cube([x_size, y_size ,pedestal_height]); // base plastics brick
 
//mount holes for ODROID
//mount holes for Raspberry Pi model A/B
 
translate ([4.5, 4.5,0])
cylinder (h = 6, r= (nut_size+clear)/2, $fn=6);
translate ([4.5, 4.5, 6.2]) // one solid layer for slicer (the holes will be pierced on demand )
cylinder (h = pedestal_height, r= mount_hole/2, $fn=10);
translate ([26.5, 19, 0])
rotate([0,0,90])
cylinder (h = 6, r= nut_size25/2, $fn=6);
translate ([26.5, 19, 6.2]) // one solid layer for slicer (the holes will be pierced on demand )
cylinder (h = pedestal_height, r= 3.0/2, $fn=30);
 
translate ([4.5 + 49, 4.5,0])
cylinder (h = 6, r= (nut_size+clear)/2, $fn=6);
translate ([4.5 + 49, 4.5, 6.2]) // one solid layer for slicer (the holes will be pierced on demand )
cylinder (h = pedestal_height, r= mount_hole/2, $fn=10);
translate ([81, 44.5, 0])
rotate([0,0,90])
cylinder (h = 6, r= nut_size25/2, $fn=6);
translate ([81, 44.5, 6.2]) // one solid layer for slicer (the holes will be pierced on demand )
cylinder (h = pedestal_height, r= 3.0/2, $fn=30);
 
translate ([4.5, 4.5 + 58,0])
cylinder (h = 6, r= (nut_size+clear)/2, $fn=6);
translate ([4.5, 4.5 + 58, 6.2]) // one solid layer for slicer (the holes will be pierced on demand )
cylinder (h = pedestal_height, r= mount_hole/2, $fn=10);
 
translate ([4.5 + 49, 4.5 + 58,0])
cylinder (h = 6, r= (nut_size+clear)/2, $fn=6);
translate ([4.5 + 49, 4.5 + 58, 6.2]) // one solid layer for slicer (the holes will be pierced on demand )
cylinder (h = pedestal_height, r= mount_hole/2, $fn=10);
 
////////////////////////////////////
translate ([1, 66 , pedestal_height - 4.5]) // HOLE for USB and Ethernet connectors
cube([55,18,5]);
 
translate ([15, 8 , pedestal_height - 3.5]) // HOLE for Passive components
cube([41,50,5]);
 
translate ([9, 1.5 , pedestal_height - 2]) // HOLE for Passive components
cube([40,10,5]);
 
translate ([22, 0 , pedestal_height - 2]) // SD Card
cube([13,16,5]);
 
translate ([2, 8 , pedestal_height - 1.7]) // IO connector
cube([4.5,50.5,5]);
 
////////////////////////////////////////
 
// MLAB grid holes
 
for (j = [0 : 5], i = [1 : 5]) {
translate ([MLAB_grid_xoffset + j*10.16, MLAB_grid_yoffset + i*10.16,0])
cylinder (h = 3, r= (nut_size+clear)/2, $fn=6);
translate ([MLAB_grid_xoffset + j*10.16, MLAB_grid_yoffset + i*10.16, 3.2]) // one solid layer for slicer (the holes will be pierced on demand )
cylinder (h = pedestal_height /3, r= mount_hole/2, $fn=10);
translate ([MLAB_grid_xoffset + j*10.16, MLAB_grid_yoffset + i*10.16, 6.0])
grid_list = [for (j = [MLAB_grid_xoffset : MLAB_grid: 86], i = [MLAB_grid_yoffset :MLAB_grid: 55])
if (!(j>20 && i>10 && j<50 && i<50) && !(j>75 && i>40 && j<90 && i<50) ) // exception for Raspberry mount holes
[j, i] ];
for (j = grid_list) {
translate (concat(j, [0]))
cylinder (h = 3, r= nut_size/2, $fn=6);
translate (concat(j, [3.2])) // one solid layer for slicer (the holes will be pierced on demand )
cylinder (h = pedestal_height /3, r= mount_hole/2, $fn=30);
translate (concat(j, [6.0]))
cylinder (h = 10, r= nut_size/2, $fn=6);
}
}
/////////////////////////////////////////
// holes for components at the bottom side of the PCB.
 
for (j = [0 : 5], i = [7 : 8]) {
translate ([MLAB_grid_xoffset + j*10.16, MLAB_grid_yoffset + i*10.16,0])
cylinder (h = 3, r= (nut_size+clear)/2, $fn=6);
translate ([MLAB_grid_xoffset + j*10.16, MLAB_grid_yoffset + i*10.16, 3.2]) // one solid layer for slicer (the holes will be pierced on demand )
cylinder (h = pedestal_height /3, r= mount_hole/2, $fn=10);
translate ([MLAB_grid_xoffset + j*10.16, MLAB_grid_yoffset + i*10.16, 6.0])
cylinder (h = 10, r= nut_size/2, $fn=6);
}
difference () {
translate ([2, 2 , pedestal_height - 3]) //
cube([83, 54, 3]);
translate ([26.5, 19, pedestal_height - 5]) // Raspberry screw mount pile
cylinder (h = pedestal_height, r= 4, $fn=20);
 
translate ([77, 40.5, pedestal_height - 5]) // Raspberry screw mount brick
cube([20,8,5]);
}
translate ([0, 14 , pedestal_height - 4]) // SD Card
cube([20,30.5,5]);
 
//// lightening central holes
translate ([9, 8 , 0])
cube([40,70,pedestal_height ]);
// MLAB logo on the side
union (){
translate ([29,0.5, 6.5]) // ODROIDs passive components hole.
rotate ([90,0,0])
scale(v = [0.4, 0.4, 0.4])
MLAB_logo_long();
}
translate ([8, 8, 0])
cube([14.5,y_size - 16,pedestal_height ]);
 
translate ([45, 86.5, 4]) // ODROIDs passive components hole.
rotate ([90,0,180])
linear_extrude(height = 0.5) {
text(text = "RPi3 - B", size = pedestal_height * 0.4);
}
translate ([30.5,8, 0])
cube([47, y_size - 16,pedestal_height ]);
}