No changes between revisions
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/HardwareProfile - PICDEM FSUSB.bak |
|---|
| 0,0 → 1,210 |
| /******************************************************************** |
| FileName: HardwareProfile - PICDEM FSUSB.h |
| Dependencies: See INCLUDES section |
| Processor: PIC18 USB Microcontrollers |
| Hardware: PICDEM FSUSB |
| Compiler: Microchip C18 |
| Company: Microchip Technology, Inc. |
| Software License Agreement: |
| The software supplied herewith by Microchip Technology Incorporated |
| (the Company) for its PIC® Microcontroller is intended and |
| supplied to you, the Companys customer, for use solely and |
| exclusively on Microchip PIC Microcontroller products. The |
| software is owned by the Company and/or its supplier, and is |
| protected under applicable copyright laws. All rights are reserved. |
| Any use in violation of the foregoing restrictions may subject the |
| user to criminal sanctions under applicable laws, as well as to |
| civil liability for the breach of the terms and conditions of this |
| license. |
| THIS SOFTWARE IS PROVIDED IN AN AS IS CONDITION. NO WARRANTIES, |
| WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED |
| TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, |
| IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR |
| CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. |
| ******************************************************************** |
| File Description: |
| Change History: |
| Rev Date Description |
| 1.0 11/19/2004 Initial release |
| 2.1 02/26/2007 Updated for simplicity and to use common |
| coding style |
| 2.3 09/15/2008 Broke out each hardware platform into its own |
| "HardwareProfile - xxx.h" file |
| ********************************************************************/ |
| #ifndef HARDWARE_PROFILE_PICDEM_FSUSB_H |
| #define HARDWARE_PROFILE_PICDEM_FSUSB_H |
| /*******************************************************************/ |
| /******** USB stack hardware selection options *********************/ |
| /*******************************************************************/ |
| //This section is the set of definitions required by the MCHPFSUSB |
| // framework. These definitions tell the firmware what mode it is |
| // running in, and where it can find the results to some information |
| // that the stack needs. |
| //These definitions are required by every application developed with |
| // this revision of the MCHPFSUSB framework. Please review each |
| // option carefully and determine which options are desired/required |
| // for your application. |
| //The PICDEM FS USB Demo Board platform supports the USE_SELF_POWER_SENSE_IO |
| //and USE_USB_BUS_SENSE_IO features. Uncomment the below line(s) if |
| //it is desireable to use one or both of the features. |
| //#define USE_SELF_POWER_SENSE_IO |
| #define tris_self_power TRISAbits.TRISA2 // Input |
| #if defined(USE_SELF_POWER_SENSE_IO) |
| #define self_power PORTAbits.RA2 |
| #else |
| #define self_power 1 |
| #endif |
| //#define USE_USB_BUS_SENSE_IO |
| #define tris_usb_bus_sense TRISAbits.TRISA1 // Input |
| #if defined(USE_USB_BUS_SENSE_IO) |
| #define USB_BUS_SENSE PORTAbits.RA1 |
| #else |
| #define USB_BUS_SENSE 1 |
| #endif |
| //Uncomment the following line to make the output HEX of this |
| // project work with the MCHPUSB Bootloader |
| //#define PROGRAMMABLE_WITH_USB_MCHPUSB_BOOTLOADER |
| //Uncomment the following line to make the output HEX of this |
| // project work with the HID Bootloader |
| #define PROGRAMMABLE_WITH_USB_HID_BOOTLOADER |
| /*******************************************************************/ |
| /******** MDD File System selection options ************************/ |
| /*******************************************************************/ |
| #define USE_PIC18 |
| #define ERASE_BLOCK_SIZE 64 |
| #define WRITE_BLOCK_SIZE 32 |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /******** Application specific definitions *************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /** Board definition ***********************************************/ |
| //These defintions will tell the main() function which board is |
| // currently selected. This will allow the application to add |
| // the correct configuration bits as wells use the correct |
| // initialization functions for the board. These defitions are only |
| // required in the stack provided demos. They are not required in |
| // final application design. |
| #define DEMO_BOARD PICDEM_FS_USB |
| #define PICDEM_FS_USB |
| #define CLOCK_FREQ 48000000 |
| /** LED ************************************************************/ |
| #define mInitAllLEDs() LATD &= 0xF0; TRISD &= 0xF0; |
| #define mLED_1 LATDbits.LATD0 |
| #define mLED_2 LATDbits.LATD1 |
| #define mLED_3 LATDbits.LATD2 |
| #define mLED_4 LATDbits.LATD3 |
| #define mGetLED_1() mLED_1 |
| #define mGetLED_2() mLED_2 |
| #define mGetLED_3() mLED_3 |
| #define mGetLED_4() mLED_4 |
| #define mLED_1_On() mLED_1 = 1; |
| #define mLED_2_On() mLED_2 = 1; |
| #define mLED_3_On() mLED_3 = 1; |
| #define mLED_4_On() mLED_4 = 1; |
| #define mLED_1_Off() mLED_1 = 0; |
| #define mLED_2_Off() mLED_2 = 0; |
| #define mLED_3_Off() mLED_3 = 0; |
| #define mLED_4_Off() mLED_4 = 0; |
| #define mLED_1_Toggle() mLED_1 = !mLED_1; |
| #define mLED_2_Toggle() mLED_2 = !mLED_2; |
| #define mLED_3_Toggle() mLED_3 = !mLED_3; |
| #define mLED_4_Toggle() mLED_4 = !mLED_4; |
| /** SWITCH *********************************************************/ |
| #define mInitAllSwitches() TRISBbits.TRISB4=1;TRISBbits.TRISB5=1; |
| #define mInitSwitch2() TRISBbits.TRISB4=1; |
| #define mInitSwitch3() TRISBbits.TRISB5=1; |
| #define sw2 PORTBbits.RB4 |
| #define sw3 PORTBbits.RB5 |
| /** POT ************************************************************/ |
| #define mInitPOT() {TRISAbits.TRISA0=1;ADCON0=0x01;ADCON2=0x3C;ADCON2bits.ADFM = 1;} |
| /** SPI : Chip Select Lines ****************************************/ |
| #define tris_cs_temp_sensor TRISBbits.TRISB2 // Output |
| #define cs_temp_sensor LATBbits.LATB2 |
| /** USB external transceiver interface (optional) ******************/ |
| #define tris_usb_vpo TRISBbits.TRISB3 // Output |
| #define tris_usb_vmo TRISBbits.TRISB2 // Output |
| #define tris_usb_rcv TRISAbits.TRISA4 // Input |
| #define tris_usb_vp TRISCbits.TRISC5 // Input |
| #define tris_usb_vm TRISCbits.TRISC4 // Input |
| #define tris_usb_oe TRISCbits.TRISC1 // Output |
| #define tris_usb_suspnd TRISAbits.TRISA3 // Output |
| /** TRIS ***********************************************************/ |
| #define INPUT_PIN 1 |
| #define OUTPUT_PIN 0 |
| #if defined(YAS) |
| #define RXTX LATBbits.LATB5 |
| #else |
| #define RXTX LATAbits.LATA2 |
| #endif |
| #define BPF_S0 LATAbits.LATA0 |
| #define BPF_S1 LATAbits.LATA1 |
| #if defined(YAS) |
| #define BPF_S2 LATAbits.LATA2 |
| #endif |
| #define BPF_S0_STATE PORTAbits.RA0 |
| #define BPF_S1_STATE PORTAbits.RA1 |
| #if defined(YAS) |
| #define BPF_S2_STATE PORTAbits.RA2 |
| #endif |
| #define PADDLE_DIT PORTBbits.RB6 |
| #define PADDLE_DAH PORTBbits.RB7 |
| #define LPF_0 LATAbits.LATA3 |
| #define LPF_1 LATAbits.LATA4 |
| #define LPF_2 LATAbits.LATA5 |
| #if defined(YAS) |
| #else |
| #define LPF_3 LATBbits.LATB2 |
| #define LPF_4 LATBbits.LATB3 |
| #define LPF_5 LATBbits.LATB4 |
| #define LPF_6 LATBbits.LATB5 |
| #endif |
| /** S W I T C H *****************************************************/ |
| #define mInitSwitch() TRISCbits.TRISC2 = 1; |
| #define UserSW PORTCbits.RC2 |
| #define mLED_Both_Off() {mLED_1_Off(); mLED_2_Off();} |
| #define mLED_Both_On() {mLED_1_On(); mLED_2_On();} |
| #define mLED_Only_1_On() {mLED_1_On(); mLED_2_Off();} |
| #define mLED_Only_2_On() {mLED_1_Off(); mLED_2_On();} |
| #endif //HARDWARE_PROFILE_PICDEM_FSUSB_H |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/HardwareProfile - PICDEM FSUSB.h |
|---|
| 0,0 → 1,210 |
| /******************************************************************** |
| FileName: HardwareProfile - PICDEM FSUSB.h |
| Dependencies: See INCLUDES section |
| Processor: PIC18 USB Microcontrollers |
| Hardware: PICDEM FSUSB |
| Compiler: Microchip C18 |
| Company: Microchip Technology, Inc. |
| Software License Agreement: |
| The software supplied herewith by Microchip Technology Incorporated |
| (the Company) for its PIC® Microcontroller is intended and |
| supplied to you, the Companys customer, for use solely and |
| exclusively on Microchip PIC Microcontroller products. The |
| software is owned by the Company and/or its supplier, and is |
| protected under applicable copyright laws. All rights are reserved. |
| Any use in violation of the foregoing restrictions may subject the |
| user to criminal sanctions under applicable laws, as well as to |
| civil liability for the breach of the terms and conditions of this |
| license. |
| THIS SOFTWARE IS PROVIDED IN AN AS IS CONDITION. NO WARRANTIES, |
| WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED |
| TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, |
| IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR |
| CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. |
| ******************************************************************** |
| File Description: |
| Change History: |
| Rev Date Description |
| 1.0 11/19/2004 Initial release |
| 2.1 02/26/2007 Updated for simplicity and to use common |
| coding style |
| 2.3 09/15/2008 Broke out each hardware platform into its own |
| "HardwareProfile - xxx.h" file |
| ********************************************************************/ |
| #ifndef HARDWARE_PROFILE_PICDEM_FSUSB_H |
| #define HARDWARE_PROFILE_PICDEM_FSUSB_H |
| /*******************************************************************/ |
| /******** USB stack hardware selection options *********************/ |
| /*******************************************************************/ |
| //This section is the set of definitions required by the MCHPFSUSB |
| // framework. These definitions tell the firmware what mode it is |
| // running in, and where it can find the results to some information |
| // that the stack needs. |
| //These definitions are required by every application developed with |
| // this revision of the MCHPFSUSB framework. Please review each |
| // option carefully and determine which options are desired/required |
| // for your application. |
| //The PICDEM FS USB Demo Board platform supports the USE_SELF_POWER_SENSE_IO |
| //and USE_USB_BUS_SENSE_IO features. Uncomment the below line(s) if |
| //it is desireable to use one or both of the features. |
| //#define USE_SELF_POWER_SENSE_IO |
| #define tris_self_power TRISAbits.TRISA2 // Input |
| #if defined(USE_SELF_POWER_SENSE_IO) |
| #define self_power PORTAbits.RA2 |
| #else |
| #define self_power 1 |
| #endif |
| //#define USE_USB_BUS_SENSE_IO |
| #define tris_usb_bus_sense TRISAbits.TRISA1 // Input |
| #if defined(USE_USB_BUS_SENSE_IO) |
| #define USB_BUS_SENSE PORTAbits.RA1 |
| #else |
| #define USB_BUS_SENSE 1 |
| #endif |
| //Uncomment the following line to make the output HEX of this |
| // project work with the MCHPUSB Bootloader |
| #define PROGRAMMABLE_WITH_USB_MCHPUSB_BOOTLOADER |
| //Uncomment the following line to make the output HEX of this |
| // project work with the HID Bootloader |
| //#define PROGRAMMABLE_WITH_USB_HID_BOOTLOADER |
| /*******************************************************************/ |
| /******** MDD File System selection options ************************/ |
| /*******************************************************************/ |
| #define USE_PIC18 |
| #define ERASE_BLOCK_SIZE 64 |
| #define WRITE_BLOCK_SIZE 32 |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /******** Application specific definitions *************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /** Board definition ***********************************************/ |
| //These defintions will tell the main() function which board is |
| // currently selected. This will allow the application to add |
| // the correct configuration bits as wells use the correct |
| // initialization functions for the board. These defitions are only |
| // required in the stack provided demos. They are not required in |
| // final application design. |
| #define DEMO_BOARD PICDEM_FS_USB |
| #define PICDEM_FS_USB |
| #define CLOCK_FREQ 48000000 |
| /** LED ************************************************************/ |
| #define mInitAllLEDs() LATD &= 0xF0; TRISD &= 0xF0; |
| #define mLED_1 LATDbits.LATD0 |
| #define mLED_2 LATDbits.LATD1 |
| #define mLED_3 LATDbits.LATD2 |
| #define mLED_4 LATDbits.LATD3 |
| #define mGetLED_1() mLED_1 |
| #define mGetLED_2() mLED_2 |
| #define mGetLED_3() mLED_3 |
| #define mGetLED_4() mLED_4 |
| #define mLED_1_On() mLED_1 = 1; |
| #define mLED_2_On() mLED_2 = 1; |
| #define mLED_3_On() mLED_3 = 1; |
| #define mLED_4_On() mLED_4 = 1; |
| #define mLED_1_Off() mLED_1 = 0; |
| #define mLED_2_Off() mLED_2 = 0; |
| #define mLED_3_Off() mLED_3 = 0; |
| #define mLED_4_Off() mLED_4 = 0; |
| #define mLED_1_Toggle() mLED_1 = !mLED_1; |
| #define mLED_2_Toggle() mLED_2 = !mLED_2; |
| #define mLED_3_Toggle() mLED_3 = !mLED_3; |
| #define mLED_4_Toggle() mLED_4 = !mLED_4; |
| /** SWITCH *********************************************************/ |
| #define mInitAllSwitches() TRISBbits.TRISB4=1;TRISBbits.TRISB5=1; |
| #define mInitSwitch2() TRISBbits.TRISB4=1; |
| #define mInitSwitch3() TRISBbits.TRISB5=1; |
| #define sw2 PORTBbits.RB4 |
| #define sw3 PORTBbits.RB5 |
| /** POT ************************************************************/ |
| #define mInitPOT() {TRISAbits.TRISA0=1;ADCON0=0x01;ADCON2=0x3C;ADCON2bits.ADFM = 1;} |
| /** SPI : Chip Select Lines ****************************************/ |
| #define tris_cs_temp_sensor TRISBbits.TRISB2 // Output |
| #define cs_temp_sensor LATBbits.LATB2 |
| /** USB external transceiver interface (optional) ******************/ |
| #define tris_usb_vpo TRISBbits.TRISB3 // Output |
| #define tris_usb_vmo TRISBbits.TRISB2 // Output |
| #define tris_usb_rcv TRISAbits.TRISA4 // Input |
| #define tris_usb_vp TRISCbits.TRISC5 // Input |
| #define tris_usb_vm TRISCbits.TRISC4 // Input |
| #define tris_usb_oe TRISCbits.TRISC1 // Output |
| #define tris_usb_suspnd TRISAbits.TRISA3 // Output |
| /** TRIS ***********************************************************/ |
| #define INPUT_PIN 1 |
| #define OUTPUT_PIN 0 |
| #if defined(YAS) |
| #define RXTX LATBbits.LATB5 |
| #else |
| #define RXTX LATAbits.LATA2 |
| #endif |
| #define BPF_S0 LATAbits.LATA0 |
| #define BPF_S1 LATAbits.LATA1 |
| #if defined(YAS) |
| #define BPF_S2 LATAbits.LATA2 |
| #endif |
| #define BPF_S0_STATE PORTAbits.RA0 |
| #define BPF_S1_STATE PORTAbits.RA1 |
| #if defined(YAS) |
| #define BPF_S2_STATE PORTAbits.RA2 |
| #endif |
| #define PADDLE_DIT PORTBbits.RB6 |
| #define PADDLE_DAH PORTBbits.RB7 |
| #define LPF_0 LATAbits.LATA3 |
| #define LPF_1 LATAbits.LATA4 |
| #define LPF_2 LATAbits.LATA5 |
| #if defined(YAS) |
| #else |
| #define LPF_3 LATBbits.LATB2 |
| #define LPF_4 LATBbits.LATB3 |
| #define LPF_5 LATBbits.LATB4 |
| #define LPF_6 LATBbits.LATB5 |
| #endif |
| /** S W I T C H *****************************************************/ |
| #define mInitSwitch() TRISCbits.TRISC2 = 1; |
| #define UserSW PORTCbits.RC2 |
| #define mLED_Both_Off() {mLED_1_Off(); mLED_2_Off();} |
| #define mLED_Both_On() {mLED_1_On(); mLED_2_On();} |
| #define mLED_Only_1_On() {mLED_1_On(); mLED_2_Off();} |
| #define mLED_Only_2_On() {mLED_1_Off(); mLED_2_On();} |
| #endif //HARDWARE_PROFILE_PICDEM_FSUSB_H |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/HardwareProfile.h |
|---|
| 0,0 → 1,103 |
| /******************************************************************** |
| FileName: HardwareProfile.h |
| Dependencies: See INCLUDES section |
| Processor: PIC18, PIC24, or PIC32 USB Microcontrollers |
| Hardware: The code is natively intended to be used on the |
| following hardware platforms: |
| PICDEM FS USB Demo Board |
| PIC18F46J50 FS USB Plug-In Module |
| PIC18F87J50 FS USB Plug-In Module |
| Explorer 16 + PIC24 or PIC32 USB PIMs |
| PIC24F Starter Kit |
| Low Pin Count USB Development Kit |
| The firmware may be modified for use on other USB |
| platforms by editing this file (HardwareProfile.h) |
| Compiler: Microchip C18 (for PIC18), C30 (for PIC24), |
| or C32 (for PIC32) |
| Company: Microchip Technology, Inc. |
| Software License Agreement: |
| The software supplied herewith by Microchip Technology Incorporated |
| (the Company) for its PIC® Microcontroller is intended and |
| supplied to you, the Companys customer, for use solely and |
| exclusively on Microchip PIC Microcontroller products. The |
| software is owned by the Company and/or its supplier, and is |
| protected under applicable copyright laws. All rights are reserved. |
| Any use in violation of the foregoing restrictions may subject the |
| user to criminal sanctions under applicable laws, as well as to |
| civil liability for the breach of the terms and conditions of this |
| license. |
| THIS SOFTWARE IS PROVIDED IN AN AS IS CONDITION. NO WARRANTIES, |
| WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED |
| TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, |
| IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR |
| CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. |
| ******************************************************************** |
| File Description: |
| Change History: |
| Rev Date Description |
| 1.0 11/19/2004 Initial release |
| 2.1 02/26/2007 Updated for simplicity and to use common |
| coding style |
| 2.3 09/15/2008 Broke out each hardware platform into its own |
| "HardwareProfile - xxx.h" file |
| ********************************************************************/ |
| #ifndef HARDWARE_PROFILE_H |
| #define HARDWARE_PROFILE_H |
| //#define DEMO_BOARD USER_DEFINED_BOARD |
| #if !defined(DEMO_BOARD) |
| #if defined(__C32__) |
| #if defined(__32MX460F512L__) |
| #if defined(PIC32MX460F512L_PIM) |
| #include "HardwareProfile - PIC32MX460F512L PIM.h" |
| #elif defined(PIC32_USB_STARTER_KIT) |
| #include "HardwareProfile - PIC32 USB Starter Kit.h" |
| #else |
| #include "HardwareProfile - UBW32.h" |
| #endif |
| #elif defined(__32MX795F512L__) |
| #if defined(PIC32MX795F512L_PIM) |
| #include "HardwareProfile - PIC32MX795F512L PIM.h" |
| #elif defined(PIC32_USB_STARTER_KIT) |
| //PIC32 USB Starter Kit II |
| #include "HardwareProfile - PIC32 USB Starter Kit.h" |
| #endif |
| #endif |
| #endif |
| #if defined(__C30__) |
| #if defined(__PIC24FJ256GB110__) |
| #include "HardwareProfile - PIC24FJ256GB110 PIM.h" |
| #elif defined(__PIC24FJ256GB106__) |
| #include "HardwareProfile - PIC24F Starter Kit.h" |
| #endif |
| #endif |
| #if defined(__18CXX) |
| #if defined(__18F4550) |
| #include "HardwareProfile - UBW.h" |
| #elif defined(__18F87J50) |
| #include "HardwareProfile - PIC18F87J50 PIM.h" |
| #elif defined(__18F14K50) |
| #include "HardwareProfile - Low Pin Count USB Development Kit.h" |
| #elif defined(__18F46J50) |
| #include "HardwareProfile - PIC18F46J50 PIM.h" |
| #elif defined(__18F2550) |
| #include "HardwareProfile - UBW.h" |
| #endif |
| #endif |
| #endif |
| #if !defined(DEMO_BOARD) |
| #error "Demo board not defined. Either define DEMO_BOARD for a custom board or select the correct processor for the demo board." |
| #endif |
| #endif //HARDWARE_PROFILE_H |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/README.txt |
|---|
| 0,0 → 1,268 |
| NEWS |
| ==== |
| 11.11.2010 |
| Firmware was edited to work without bootloader falashing tool. |
| So simply program PIC18F4550.hex in to PIC18F4550v01A module with 20MHz crystal. |
| Connect it via I2C to CLKGEN01A. And you have wide tunable LO compatible with DG8SAQ USB Si570 synthesiser! |
| 14 Apr 2009 |
| The UBW has 1 power indicator LED, and 2 blinking LED's usually used to indicate the |
| status of USB connections with the PC. |
| Charles (and maybe some of you) finds the blinking LED's to be too bright and |
| distracting. |
| So I have implemented a toggle switch (the PRG button) function for you to turn |
| the blinking on or off. |
| Once turned on or off, the setting is stored in EEPROM, so it will continue to |
| behave this way when you power off and next power on the UBW. |
| The default setting is LED blinking ON. So when you (re)flash the firmware, the |
| default is active. |
| 14 Mar 2009 |
| I have just released the latest version of my UBW Emulator firmware. It now |
| has (almost) all the functionalities of Fred (PE0FKO)'s v15.10 firmware for |
| ATTINY45 and ATTINY85. All the functions are accessible with Winrad with Fred's |
| ExtIO_Si570_v0.8.dll, including the wonderful option of setting of the |
| filter crossover points from the software. The crossover points are stored |
| in the UBW EEPROM so it will persist until changed again. Another new feature |
| is the setting of floating point offset and multiplier in the firmware. This |
| complements the setting of offset and (usually) integer multiplier in the PC |
| SDR software. |
| Winrad/ExtIO can be used to calibrate the UBW/Si570 (2 methods are available - |
| calibrating the default freq, or against a known station freq, eg. WWV). |
| Once calibrated, there is no need to calibrate other software - both set |
| freq by value and set freq by register will give the correct calibrated |
| freq now. In PowerSDR, leave the fxtal freq at the default 114.285 Mhz. |
| The new UBW Emulator works perfectly with Rocky v3.6, PowerSDR-sr40, |
| and PowerSDR-IQ. (set the Fxtal freq in the setup tab to the default 114.285 Mhz). |
| With Fred's v15.10 firmware in the ATTINY, users can use the ATTINY based USB |
| interfaces to do auto band switching of the mobo for Rx. To be able to do both Rx |
| and Tx BPF switching, Rx/Tx switching (PTT), and external LPF switching, from a |
| single USB connection, there are only 3 uC solutions that I know of: |
| 1. The UBW (or UBW32) with this UBW firmware |
| 2. Dave Brainerd's HSUSB, with firmware by Christos |
| 3. Arduino board (or clone), with PE0FKO firmware modified by Loftur TF3LJ. |
| See Message #31623 |
| UBW EMULATOR |
| ============ |
| This is the UBW emulator firmware for emulating the AVR based |
| DG8SAQ USB Si570 synthesiser, and Tony's USB-i2C Interface. |
| It emulates most of the functions of the orginal DG8SAQ firmware. |
| In addition, it emulates the new functions of the PE0FKO firmware (v15.10) |
| by Fred, with smooth tune, calibration, setting of Auto BPF crossover |
| points, setting of startup freq etc. After calibration of the UBW, |
| both set freq by value (used by Rocky) and set freq by register (used by |
| PowerSDR-sr40, with the fxtal freq set to the default 114.285 Mhz) will |
| give the correct calibrated freq output from the Si570. No further |
| calibration with the PC software is required. |
| I would like to thank Joe Hopster who wrote the original UBW Si570 |
| code, Tom DG8SAQ for the AVR synthesiser code, Mike Collins who has |
| been invaluable in helping with the debugging and testing, John Fisher |
| for the code example on Si570 slide, Edson for advice on BPF selection coding, |
| bug fixing and testing, Fred for help to emulate his v15.7 firmware, |
| and others who have contributed so much to Softrock and Si570. |
| The emulator firmware HEX file is loaded in the UBW (either PIC |
| 18F2455, 18F2550 or 18F2553 version) by the Microchip USB bootloader. |
| See UBW website for more details about the bootloader. |
| Before starting the firmware (via the reset button, or on power up by |
| plugging in the USB), the UBW should be connected via i2c interface to |
| an Si570. Power up the Si570 before the UBW. |
| There are several ways for connecting the UBW with the Si570. |
| (1) Connection is with 4 wires, +5V, Gnd, SCL, SDA, to an i2c |
| level converter, and then to Si570 with 4 wires, +3V3, Gnd, SCL, and |
| SDA. If you use the WB6DHW Si570 board, it has the level converter built-in. So |
| You can just connect the 4 wires to the header pins on the WB6DHW board. Note |
| that the order of the 4 wires on the UBW is: GND, VCC, RB0, RB1. The order |
| of the 4 header pins on WB6DHW board is: +5V, GND, SDA, SCL. |
| (2) If you are not using an IC such as GTL2002 for +5V to +3V3 conversion, you |
| can use discretes with the Philips (see AN97055 from Philips) |
| i2c level converter circuit using 2 BS170's. |
| (3) The UBW Emulator firmware sets up the SCL and SDA pins as open collector outputs. |
| So you can just connect 3 wires from the UBW to the +3v3 Si570 on the Softrock: |
| GND, SCL and SDA. The SCL and SDA lines will have pullup resistors to +3V3 on the |
| Softrock pcb. This has been tested to work. HOwever, there is the risk that |
| if the UBW firmware malfunctions for some reason (eg loading the wrong firmware instead |
| of the Emulator firmware), the RB0 and RB1 (SDA and SCL) pins may go to output high of |
| +5V, which may damage the Si570 or other +3V3 chips. |
| The PC will detect the new USB device as a DG8SAQ-I2C device and as |
| far as the PC is concerned, the UBW behaves almost exactly like the |
| USB Si570 synthesiser (which is based on the AVR uController). When |
| prompted by the PC to install the driver for this device, you install |
| the AVR USB driver (from the USB Si570 synthesiser software download). |
| You will also need the libusb0.dll and libusb0.sys files installed |
| for the PC software to work (available also from the USB Si570 synthesiser |
| software package). |
| The following PC software programs have been tested with the UBW emulation so far: |
| 1. SI570_USB_Test.exe from the USB Si570 synthesiser software package |
| 2. USB_Synth.exe from the USB Si570 synthesiser software package |
| 2. Rocky v3.6 |
| 3. Guido's PowerSDR v1.9.0 sr40 |
| 4. WinRad with Fred's ExtIO_Si570_v0.8.dll |
| 5. Christos's PowerSDR-IQ v1.12.20 |
| SI570_USB_Test.exe can be used test the USB communication and UBW |
| functions,and for calibrating the UBW-Si570 ie. |
| (1) Click "Read Si570 Register" - the default Si570 startup frequency |
| and register values will be displayed |
| (2) If you know the actual startup frequency of your Si570 (which is |
| close to but generally not equal to the nominal startup freq of 56.32 |
| Mhz), you can do the calibration now by inputting the actual freq in the |
| text box to the left of the "cal on startup freq", and then hit "cal |
| on startup freq". The UBW-Si570 is now calibrated for "set freq by |
| value". The calibration is stored in the EEPROM of the UBW and you do |
| not need to re-calibrate again unless you reload the UBW firmware from |
| the .hex file. |
| (3) Now you can input any freq desired in the text box and hit either |
| "set freq by value" or "set freq by register". The si570 should now |
| output the freq set by you. It should be accurate as set, and can be |
| confirmed with an external freq counter. |
| Many of the functions of the SI570_USB_Test.exe have been implemented, |
| including Paddle input, RXTX level, etc. |
| Both the "old" and "new" (with new icon) versions of USB_Synth.exe work in setting |
| the Si570 freq. The old version uses set freq by value, and the new version |
| (with enhancements) uses set freq by register. |
| If the SI570_USB_Test run is OK, you can fire up Rocky v3.6 to use the |
| Si570-USB functionality. Rocky uses the "set freq by value" method. You can use |
| the Rocky calibration function with the UBW, but it should not be necessary and should |
| be avoided. Use the calibration method in WinRad (see below under Calibration) or |
| the SI570_USB_Test.exe method (see above). |
| PowerSDR works by "set Freq by Register" method. You can change freq by the band buttons |
| or sliding the freq up and down with the mouse. Leave the Fxtal |
| freq in PowerSDR "Setup" to the default 114.285 Mhz. There is no need for |
| further calibration. |
| To use Winrad, you have to download the ExtIO_Si570.dll by Fred PE0FKO. Put the v0.8 |
| dll in the same directory as Winrad (usually installed in "c:\Program Files\Winrad" directory). |
| Calibration |
| =========== |
| You can use Winrad (with ExtIO_Si570_v0.8.dll by Fred) to do the calibration. This is the |
| easier (and preferred method). There are two calibration methods in ExtIO_Si570.dll. One is |
| calibrating to the factory default freq of the Si570 (a value close to 56.32 Mhz). The |
| other method is to tune Winrad to a known frequency station, eg. the WWV stations broadcasting |
| at 2.5 Mhz, 5.0 Mhz, 10.0 Mhz, 15.0 Mhz etc., and then put in the actual frequencies. For |
| example, you may find a good signal of WWV at 10.023 Mhz. So the "tuned" freq is 10.023 Mhz, |
| but the "real" freq is 10.000 Mhz. So you enter this real freq in the box and the hit "calibrate" |
| botton. |
| Si570 calibration can also be done with SI570_USB_Test.exe software, |
| to calibrate the startup freq accurately once after loading (or reloading) |
| of the firmware .hex file. The calibration data are then stored in the UBW EEPROM. |
| If UBW is not connected to the Si570 |
| ==================================== |
| I have eliminated the readstartupconfiguration() step. So now the UBW will NOT hang |
| when it is not connected to the i2c bus on startup. On connection to USB it will be |
| recognized by the PC. |
| Of course, if you try to communicate with the Si570 it will hang and disconnect from |
| the USB if you don't have the Si570 connected at this time. |
| Restoring EEPROM to factory default condition |
| ============================================= |
| After the UBW EEPROM is corrupted (eg. by mis-calibration), you can restore the factory default |
| by reloading the .hex file. (Thanks to Mike for the suggestion.). Alternatively, you can use |
| SI570_USB_Test.exe to sent 41 (hex) in the "request" box, and ff (hex) in the "Value" box, |
| then click "USB ctrl msg Data to Host". This then clears the EEPROM in the UBW to the default |
| condition and when you reset the UBW (hit the reset botton on the uBW, or by powering off |
| and then on again). |
| Using Winrad, there is a "reset" botton at the "calibrate" tab which will do the same thing. |
| Download |
| ======== |
| The UBW emulation firmware and the source files can be found in |
| Files->9V1AL->UBW emulation. |
| IO Port Pin assignment |
| ====================== |
| Pin assignments for the UBW are as follows: |
| Pin Name Input/Output Active Remarks |
| RA0 BPF_SO O H BPF select S0 |
| RA1 BPF_S1 O H BPF select S1 |
| S1,S0 selects 1 of 4 BPF's for Softrock |
| RA2 RXTX O H PTT, H = Transmit |
| RB0 SDA Open Collector For i2c connection to Si570 |
| RB1 SCL Open Collector may need conversion to +3v3 |
| in case of firmware failure |
| (eg wrong firmware loaded) |
| then RB0 and RB1 may be set |
| to logic high output of +5V |
| RB6 PADDLE_DIT I L Paddle DIT Input, active low |
| RB7 PADDLE_DAH I L Paddle DAH Input, active low |
| As internal pullup is enabled, |
| there is no need to add external |
| pullup resistors. Just ground the pin |
| to activate. |
| RA3-5, RB2-5 LPF_x O H LPF select pins |
| This has to be customised for |
| the LPF bank you use. |
| Email me (lee188@singnet.com.sg) |
| and I will sent you a customised hex file |
| Connections to SR v6.3 and Mobo v3.6 |
| ===================================== |
| UBW SRv6.3 Mobo v3.6 External Paddle |
| RA0 - P7 Pin 1 - |
| RA1 - P7 Pin 2 - |
| RA2 PTT_I K6 Pin 1 - |
| RB0 SDA - - |
| RB1 SCL - - |
| GND GND P10 Pin 2 Paddle Common |
| RB6 - - Paddle dot (dit) |
| RB7 - - Paddle dash (dah) |
| - +5V P10 Pin 1 - |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/USB Device - MCHPUSB - Generic Driver - C18 - PIC18F4550.hex |
|---|
| 0,0 → 1,1389 |
| :020000040000FA |
| :06000000FBEF2DF01200E1 |
| :0600080004EF04F01200F9 |
| :060018000CEF04F01200E1 |
| :06080000FBEF2DF01200D9 |
| :060808000CEF2CF01200C1 |
| :0608180015EF2CF01200A8 |
| :06082A000100425C000029 |
| :08083000E901000005000000D1 |
| :08083800D9CFE6FFE1CFD9FFA3 |
| :10084000080EE126FD0EDBCF00F0FE0EDBCF01F03F |
| :10085000050ED89001320032E804FBE100C02CF014 |
| :1008600001C02DF014EC29F02BC0DEFF2CC0DEFF00 |
| :100870002DC0DEFF2EC0DDFFDD52DD521F0EE76E04 |
| :10088000FD0EDBCF04F0FE0EDBCF05F0E7500416C3 |
| :10089000056A04C02CF005C02DF014EC29F02BC023 |
| :1008A00000F02CC001F02DC002F02EC003F0306A21 |
| :1008B000316A326A420E336E00C02BF001C02CF058 |
| :1008C00002C02DF003C02EF0DBEC29F0040E2BC08B |
| :1008D000DBFF050E2CC0DBFF060E2DC0DBFF070E75 |
| :1008E0002EC0DBFFD9CFE9FFDACFEAFFEECF04F06D |
| :1008F000EECF05F0EECF06F0EFCF07F0040EDBCF22 |
| :1009000008F0050EDBCF09F0060EDBCF0AF0070E6C |
| :10091000DBCF0BF008C030F009C031F00AC032F074 |
| :100920000BC033F004C02BF005C02CF006C02DF036 |
| :1009300007C02EF045EC29F02BC000F02CC001F0D0 |
| :100940002DC002F02EC003F000C02AF001C02BF031 |
| :1009500002C02CF003C02DF0080EE15C03E200D0D1 |
| :10096000E16AE552E16EE552E7CFD9FF1200D9CF37 |
| :10097000E6FFE1CFD9FF040EE126FB0EDBCF2BF023 |
| :10098000FC0EDBCF2CF0FD0EDBCF2DF0FE0EDBCF0F |
| :100990002EF0B9EC2AF0020E2CC0DBFF030E2DC0A6 |
| :1009A000DBFF020EDBCF2CF0030EDBCF2DF014ECBF |
| :1009B00029F02BC000F02CC001F02DC002F02EC099 |
| :1009C00003F0306A316A326A420E336E00C02BF097 |
| :1009D00001C02CF002C02DF003C02EF02EEC2AF046 |
| :1009E000B9EC2AF02CC0DEFF2DC0DDFFFB0EDBCF03 |
| :1009F00006F0FC0EDBCF07F0FD0EDBCF08F0FE0E9D |
| :100A0000DBCF09F0020EDBCF2CF0030EDBCF2DF095 |
| :100A100014EC29F02BC00AF02CC00BF02DC00CF008 |
| :100A20002EC00DF00AC030F00BC031F00CC032F017 |
| :100A30000DC033F006C02BF007C02CF008C02DF01D |
| :100A400009C02EF044EC29F02BC002F02CC003F0BA |
| :100A50002DC004F02EC005F0306A316A326A420EB1 |
| :100A6000336E02C02BF003C02CF004C02DF005C083 |
| :100A70002EF02EEC2AF0B9EC2AF02CC000F02DC09C |
| :100A800001F0D9CFE9FFDACFEAFF0050EE2601509E |
| :100A9000ED22DECF00F0DDCF01F000C0F3FF01C09A |
| :100AA000F4FF040EE15C03E200D0E16AE552E16E7E |
| :100AB000E552E7CFD9FF1200D9CFE6FFE1CFD9FF4A |
| :100AC000060EE126896A926A0F0EC16EC290070E69 |
| :100AD000B46E8A6AC30E936EF19E8B6A9468FC0EA4 |
| :100AE0008B16941694848250040B01E0010E0101D0 |
| :100AF000006F550E016F000EE66EE66A85EC2DF074 |
| :100B0000E552E552550809E00101A56BF60EA66F06 |
| :100B1000480EA76F720EA86F37D0020EDB6A030E65 |
| :100B2000DB6A020EDBCF00F0030EDBCF01F0040E18 |
| :100B3000005C000E015828E2010EE76E020EDBCFCA |
| :100B400000F0030EDBCF01F0E7500026000E01227B |
| :100B500000C0E6FF01C0E6FF85EC2DF0E552E5524E |
| :100B6000E66E020EDBCFE9FF030EDBCFEAFFA50E38 |
| :100B7000E926010EEA22E552E750EF6E020EDB2A6B |
| :100B8000030E01E3DB2ACDD7A5C12AF0A6C12BF0C5 |
| :100B9000A7C12CF0A8C12DF029EC29F02BC000F042 |
| :100BA0002CC001F02DC002F02EC003F0306A316A73 |
| :100BB000800E326E4B0E336E00C02BF001C02CF055 |
| :100BC00002C02DF003C02EF0DBEC29F02BC0C6F1E3 |
| :100BD0002CC0C7F12DC0C8F12EC0C9F10101010E12 |
| :100BE000DE6FA06B9E6B9F6BCA6BCB6BCC6BCD6BC0 |
| :100BF000050EE66EE66A85EC2DF0E552E5525508E5 |
| :100C00000AE00101700EA16F3D0EA26F0A0EA36FE4 |
| :100C1000070EA46F3BD0020EDB6A030EDB6A020EE6 |
| :100C2000DBCF00F0030EDBCF01F0040E005C000E02 |
| :100C300001582CE2050EE76E020EDBCF00F0030E2A |
| :100C4000DBCF01F0E7500026000E0122010E002646 |
| :100C5000000E012200C0E6FF01C0E6FF85EC2DF08A |
| :100C6000E552E552E66E020EDBCFE9FF030EDBCF65 |
| :100C7000EAFFA10EE926010EEA22E552E750EF6EE7 |
| :100C8000020EDB2A030E01E3DB2AC9D70A0EE66E49 |
| :100C9000E66A85EC2DF0E552E55255080AE00101BF |
| :100CA000420ECE6F600ECF6F650ED06F3B0ED16FD0 |
| :100CB00066D0020EDB6A030EDB6A020EDBCF00F0A9 |
| :100CC000030EDBCF01F0020E005C000E01582EE295 |
| :100CD0000A0EE76E020EDBCF02F0030EDBCF03F04D |
| :100CE000E7500226000E0322010E0226000E032208 |
| :100CF00002C0E6FF03C0E6FF85EC2DF0E552E552A9 |
| :100D0000E66ED9CF00F0DACF01F0020EDB500024FE |
| :100D1000E96E030EDB500120EA6EE552E750EF6EFC |
| :100D2000020EDB2A030E01E3DB2AC7D7000EDFCF5A |
| :100D30002CF0010EDBCF2DF014EC29F02BC000F0CD |
| :100D40002CC001F02DC002F02EC003F0306A240E3A |
| :100D5000316E740E326E490E336E00C02BF001C03E |
| :100D60002CF002C02DF003C02EF0DBEC29F02BC0DC |
| :100D7000CEF12CC0CFF12DC0D0F12EC0D1F10D0E8F |
| :100D8000E66EE66A85EC2DF0E552E55255080BE07B |
| :100D90000101DA6BDB6BDC6BDD6BD66BD76B200E86 |
| :100DA000D86FD96B76D0020EDB6A030EDB6A020EB7 |
| :100DB000DBCF00F0030EDBCF01F0040E005C000E71 |
| :100DC00001582CE20D0EE76E020EDBCF00F0030E91 |
| :100DD000DBCF01F0E7500026000E0122010E0026B5 |
| :100DE000000E012200C0E6FF01C0E6FF85EC2DF0F9 |
| :100DF000E552E552E66E020EDBCFE9FF030EDBCFD4 |
| :100E0000EAFFDA0EE926010EEA22E552E750EF6E1C |
| :100E1000020EDB2A030E01E3DB2AC9D7020EDB6ACE |
| :100E2000030EDB6A020EDBCF00F0030EDBCF01F016 |
| :100E3000040E005C000E01582CE20D0EE76E020E4F |
| :100E4000DBCF00F0030EDBCF01F0E7500026000EF1 |
| :100E50000122050E0026000E012200C0E6FF01C09F |
| :100E6000E6FF85EC2DF0E552E552E66E020EDBCF93 |
| :100E7000E9FF030EDBCFEAFFD60EE926010EEA22D8 |
| :100E8000E552E750EF6E020EDB2A030E01E3DB2A88 |
| :100E9000C9D7160EE66EE66A85EC2DF0E552E552EE |
| :100EA000550801E1DDD000019A0E706F990E716F47 |
| :100EB000190E726F410E736F746B756B080E766F3F |
| :100EC000420E776F786B796B980E7A6F420E7B6F5C |
| :100ED000020EDB6A030EDB6A020EDBCF00F0030EAC |
| :100EE000DBCF01F0005C000E01583BE2020EDBCFCD |
| :100EF000E9FF030EDBCFEAFF020ED890E936EA36AF |
| :100F0000E806FBE1700EE926000EEA22EECFE6FFCE |
| :100F1000EECFE6FFEECFE6FFEFCFE6FF28DDE552AE |
| :100F2000E552E552E552F3CF00F0F4CF01F0020EA6 |
| :100F3000DBCFE9FF030EDBCFEAFF010ED890E936E5 |
| :100F4000EA36E806FBE1600EE926000EEA2200C060 |
| :100F5000EEFF01C0EDFF020EDB2A030E01E3DB2AE8 |
| :100F6000BBD7010E0001666F676B01010D6F0001B9 |
| :100F70009C6B9D6B9E6B410E9F6FA06BA16B800E57 |
| :100F8000A26F410EA36FA46BA56B100EA66F420E4D |
| :100F9000A76FA86BA96B300EAA6F420EAB6FAC6B3C |
| :100FA000AD6B680EAE6F420EAF6FB06BB16BA00E43 |
| :100FB000B26F420EB36FB46BB56BF00EB66F420EEC |
| :100FC000B76F020EDB6A030EDB6A020EDBCF00F0A6 |
| :100FD000030EDBCF01F0070E005C000E01583BE270 |
| :100FE000020EDBCFE9FF030EDBCFEAFF020ED89043 |
| :100FF000E936EA36E806FBE19C0EE926000EEA2215 |
| :10100000EECFE6FFEECFE6FFEECFE6FFEFCFE6FF57 |
| :10101000AEDCE552E552E552E552F3CF00F0F4CFF5 |
| :1010200001F0020EDBCFE9FF030EDBCFEAFF010E7A |
| :10103000D890E936EA36E806FBE18C0EE926000E88 |
| :10104000EA2200C0EEFF01C0EDFF020EDB2A030E14 |
| :1010500001E3DB2ABAD7010E00019A6F9B6BDED049 |
| :10106000020EDB6A030EDB6A020EDBCF00F0030E1A |
| :10107000DBCF01F0040E005C000E01585FE2020EAF |
| :101080002C6E2D6ADBCF31F0030EDBCF32F09BEC00 |
| :101090002AF02AC000F02BC001F0160E0026000E28 |
| :1010A0000122010E0026000E012200C0E6FF01C051 |
| :1010B000E6FF85EC2DF0E552E552DF6E020E2C6E58 |
| :1010C0002D6ADBCF31F0030EDBCF32F09BEC2AF040 |
| :1010D0002AC000F02BC001F0010E0026000E0122F4 |
| :1010E000160E0026000E0122010E0026000E01221F |
| :1010F00000C0E6FF01C0E6FF85EC2DF0E552E552A9 |
| :10110000E76E010EE7CFDBFF020EDBCFE9FF030E38 |
| :10111000DBCFEAFF010ED890E936EA36E806FBE1BC |
| :10112000600EE926000EEA22DECFEEFFDDCFEDFFF6 |
| :10113000020EDB2A030E01E3DB2A96D766C00DF10F |
| :10114000020EDB6A030EDB6A020EDBCF00F0030E39 |
| :10115000DBCF01F0080E005C000E01585FE2020ECA |
| :101160002C6E2D6ADBCF31F0030EDBCF32F09BEC1F |
| :101170002AF02AC000F02BC001F0160E0026000E47 |
| :101180000122110E0026000E012200C0E6FF01C060 |
| :10119000E6FF85EC2DF0E552E552DF6E020E2C6E77 |
| :1011A0002D6ADBCF31F0030EDBCF32F09BEC2AF05F |
| :1011B0002AC000F02BC001F0010E0026000E012213 |
| :1011C000160E0026000E0122110E0026000E01222E |
| :1011D00000C0E6FF01C0E6FF85EC2DF0E552E552C8 |
| :1011E000E76E010EE7CFDBFF020EDBCFE9FF030E58 |
| :1011F000DBCFEAFF010ED890E936EA36E806FBE1DC |
| :101200008C0EE926000EEA22DECFEEFFDDCFEDFFE9 |
| :10121000020EDB2A030E01E3DB2A96D7020EDB6AFD |
| :10122000030EDB6A020EDBCF00F0030EDBCF01F012 |
| :10123000005C000E01583EE2020EDBCFE9FF030E18 |
| :10124000DBCFEAFF010ED890E936EA36E806FBE18B |
| :10125000600EE926000EEA22EECFE6FFEFCFE6FFB2 |
| :101260001CEC04F0E552E5522AC000F02BC001F05E |
| :101270002CC002F02DC003F0020EDBCFE9FF030EFD |
| :10128000DBCFEAFF020ED890E936EA36E806FBE14A |
| :10129000700EE926000EEA2200C0EEFF01C0EEFF4C |
| :1012A00002C0EEFF03C0EEFF020EDB2A030E01E3D5 |
| :1012B000DB2AB8D7020EDB6A030EDB6A020EDBCF35 |
| :1012C00000F0030EDBCF01F0070E005C000E0158AA |
| :1012D0003EE2020EDBCFE9FF030EDBCFEAFF010E99 |
| :1012E000D890E936EA36E806FBE18C0EE926000ED6 |
| :1012F000EA22EECFE6FFEFCFE6FF1CEC04F0E5526A |
| :10130000E5522AC000F02BC001F02CC002F02DC025 |
| :1013100003F0020EDBCFE9FF030EDBCFEAFF020E84 |
| :10132000D890E936EA36E806FBE19C0EE926000E85 |
| :10133000EA2200C0EEFF01C0EEFF02C0EEFF03C0D4 |
| :10134000EEFF020EDB2A030E01E3DB2AB7D7370ECE |
| :10135000E66EE66A85EC2DF0E552E5520101EB6F91 |
| :10136000E66A080EE66EA0EC2DF0E552E552300E6E |
| :10137000C86E12D9050EE66EE66A85EC2DF0E552D0 |
| :10138000E552550837E1A1C12AF0A2C12BF0A3C153 |
| :101390002CF0A4C12DF029EC29F02BC000F02CC0BA |
| :1013A00001F02DC002F02EC003F0306A316A326ABB |
| :1013B0004A0E336E00C02BF001C02CF002C02DF09D |
| :1013C00003C02EF0DBEC29F02BC0D2F12CC0D3F1FE |
| :1013D0002DC0D4F12EC0D5F1D2C1E6FFD3C1E6FFB6 |
| :1013E000D4C1E6FFD5C1E6FF81EC13F0E552E5522A |
| :1013F000E552E552060EE15C02E2E16AE552E16E79 |
| :10140000E552E7CFD9FF1200B4D8000911E001017D |
| :10141000EB5102E0000E01D0010EEB6FEBC1E6FFD5 |
| :10142000370EE66EE66A60EC2DF0E552E552E552C5 |
| :101430000101EB5102E055D802D08B908B92100E37 |
| :101440000001E76EB819E8AE02D0E73402D0E750E9 |
| :10145000B85D03E36D50020B01E001D001D812002A |
| :10146000D9CFE6FFE1CFD9FFE6520101A051000834 |
| :1014700033E29F51090DF3CFE9FFF4CFEAFF0E0EDF |
| :10148000E926010EEA22EFCFDFFFDF50350A1AE02E |
| :10149000010A15E0070A10E0010A0BE0030A06E062 |
| :1014A000010A01E012D0A7EC14F00FD03CEC16F0CA |
| :1014B0000CD02BEC14F009D010EC15F006D0D0ECC9 |
| :1014C00015F003D07EEC1AF000D001019F2B100E16 |
| :1014D0009F5D01E39F6BA007E552E552E7CFD9FF7F |
| :1014E00012000101EC51ED1104E1100EEC6F270E1A |
| :1014F000ED6FEC07000EED5B6DA20BD0EC51ED1122 |
| :1015000007E18B708B50010B02E08B8201D08B9234 |
| :101510002FD00001B85103E18B908B9229D0B805F0 |
| :1015200003E18B808B8224D0020EB85D03E18B80B7 |
| :101530008B921ED0040EB85D03E18B908B8218D085 |
| :10154000100EB85D07E10101EC51ED1102E18B7065 |
| :101550008B920ED0200EB85D0BE10101EC51ED1124 |
| :1015600007E18B708B50010B02E08B9201D08B82D4 |
| :1015700012008250040B01E0010E0101005D09E040 |
| :101580008250040B01E0010E006F82B402D0010E04 |
| :1015900002D0000E00D01200C580C5B0FED716ECF8 |
| :1015A0002EF001010151E824E66E27EC2DF0E55202 |
| :1015B000870EE66E27EC2DF0E552010EE66E27EC65 |
| :1015C0002DF0E552C584C5B4FED716EF2EF0D9CF65 |
| :1015D000E6FFE1CFD9FF020EE126DE6ADD6ADECF4B |
| :1015E00000F0DDCF01F0060E005C000E01583BE27A |
| :1015F000C580C5B0FED716EC2EF001010151E824DC |
| :10160000E66E27EC2DF0E552DECF00F0DDCF01F0E5 |
| :10161000070E0024E66E27EC2DF0E552C582C5B218 |
| :10162000FED716EC2EF001010151E8240109E66E07 |
| :1016300027EC2DF0E55209EC2EF0E66EDECFE9FF47 |
| :10164000DDCFEAFFAB0EE926010EEA22E552E750B4 |
| :10165000EF6EC584C5B4FED716EC2EF0DF2A010E5E |
| :1016600001E3DB2ABCD7020EE15C02E2E16AE5524B |
| :10167000E16EE552E7CFD9FF1200890EE66EE66A09 |
| :101680003DD8E552E55209EC2EF00101A96FAA6B95 |
| :10169000100EA911A96F5EEF0BF0890EE66EE66AD7 |
| :1016A0002DD8E552E55209EC2EF00101A96FAA6B85 |
| :1016B000EF0EA915A96FAA6B5EEF0BF0C584C5B438 |
| :1016C000FED716EC2EF0C580C5B0FED716EC2EF076 |
| :1016D00001010151E824E66E27EC2DF0E552890E58 |
| :1016E000E66E27EC2DF0E552A9C1E6FF27EC2DF0C0 |
| :1016F000E552C584C5B4FED716EF2EF0D9CFE6FF6C |
| :10170000E1CFD9FFC580C5B0FED716EC2EF00101A0 |
| :101710000151E824E66E27EC2DF0E552FD0EDBCFFB |
| :10172000E6FF27EC2DF0E552C582C5B2FED716ECD8 |
| :101730002EF001010151E8240109E66E27EC2DF09D |
| :10174000E552E552E7CFD9FF1200870EE66EE66A52 |
| :10175000D5DFE552E55209EC2EF00101E96FEA6BA5 |
| :10176000E98DC584C5B4FED716EC2EF0C580C5B092 |
| :10177000FED716EC2EF001010151E824E66E27ECAD |
| :101780002DF0E552870EE66E27EC2DF0E552E9C10B |
| :10179000E6FF27EC2DF0E552C584C5B4FED716EF61 |
| :1017A0002EF0D9CFE6FFE1CFD9FF1F0EE1260C0EB8 |
| :1017B000DB6A300EF36E0D0EF3CFDBFFB10EF36E6E |
| :1017C0000E0EF3CFDBFF450EF36E0F0EF3CFDBFFF4 |
| :1017D000100EDB6A900EF36E110EF3CFDBFF970E47 |
| :1017E000F36E120EF3CFDBFF450EF36E130EF3CF45 |
| :1017F000DBFF190EDB6A1A0EDB6A1B0EDB6A1C0E9E |
| :10180000DB6A100EDBCF2BF0110EDBCF2CF0120EAB |
| :10181000DBCF2DF0130EDBCF2EF0FB0EDBCF30F045 |
| :10182000FC0EDBCF31F0FD0EDBCF32F0FE0EDBCF56 |
| :1018300033F0DBEC29F02BC000F02CC001F02DC000 |
| :1018400002F02EC003F000C02BF001C02CF002C04B |
| :101850002DF003C02EF0B9EC2AF01D0E2CC0DBFFDA |
| :101860001E0E2DC0DBFF800EF36E1B0EF3CFDBFFD1 |
| :10187000050EF36E1C0EF3CFDBFF0B0EF36E140E92 |
| :10188000F3CFDBFFDB50030801E397D0140EDB50EE |
| :10189000080804E0140EDB500A0801E18BD0140E96 |
| :1018A000DB50026E036A1D0EDBCF2CF01E0EDBCF69 |
| :1018B0002DF002C031F003C032F0D5EC2DF02CC079 |
| :1018C00000F02DC001F0010E0026000E0122150EC1 |
| :1018D00000C0DBFF160E01C0DBFFD950150FE96E0B |
| :1018E000DACFEAFF800ED880EE54000EED5401E20C |
| :1018F00061D0D950150FE96EDACFEAFF010EEE186C |
| :1019000001E1ED5018E0010EE76E150EDBCF00F09F |
| :10191000160EDBCF01F0E7500016016A010E001829 |
| :1019200001E1015008E1D950150FE96EDACFEAFF65 |
| :10193000EE2A000EED22140EDB50006E016A00C08C |
| :101940002CF001C02DF0150EDBCF31F0160EDBCFE1 |
| :1019500032F09BEC2AF0170E2AC0DBFF180E2BC0CA |
| :10196000DBFF1B0EDBCF00F01C0EDBCF01F0170EF0 |
| :10197000DBCF02F0180EDBCF03F00050025C015009 |
| :10198000035818E2170EDBCF2CF0180EDBCF2DF02A |
| :101990001B0E2CC0DBFF1C0E2DC0DBFF150EDB5019 |
| :1019A000E76E1A0EE7CFDBFF140EDB50E76E190E61 |
| :1019B000E7CFDBFF140EDB0665D70101DE6B190EE6 |
| :1019C000DB5001E198D1FB0EDBCF00F0FC0EDBCF4A |
| :1019D00001F0FD0EDBCF02F0FE0EDBCF03F01B0E9D |
| :1019E000DBCF2CF01C0EDBCF2DF014EC29F02BC03C |
| :1019F00004F02CC005F02DC006F02EC007F004C086 |
| :101A000030F005C031F006C032F007C033F000C03E |
| :101A10002BF001C02CF002C02DF003C02EF02EECF4 |
| :101A20002AF02BC0BEF12CC0BFF12DC0C0F12EC0DA |
| :101A3000C1F10C0EDBCF00F00D0EDBCF01F00E0E6E |
| :101A4000DBCF02F00F0EDBCF03F000C030F001C09F |
| :101A500031F002C032F003C033F0BEC12BF0BFC181 |
| :101A60002CF0C0C12DF0C1C12EF01FEC2BF0010AEB |
| :101A700001E141D10101010EDE6FC6C130F0C7C1E5 |
| :101A800031F0C8C132F0C9C133F0BEC12BF0BFC1C3 |
| :101A90002CF0C0C12DF0C1C12EF0DBEC29F02BC021 |
| :101AA000BEF12CC0BFF12DC0C0F12EC0C1F1BEC12E |
| :101AB0002BF0BFC12CF0C0C12DF0C1C12EF0E8EC5D |
| :101AC0002AF0040E2AC0DBFF050E2BC0DBFF060E3A |
| :101AD0002CC0DBFF070E2DC0DBFF040EDBCF04F0B4 |
| :101AE000050EDBCF05F0060EDBCF06F0070EDBCFD1 |
| :101AF00007F004C02AF005C02BF006C02CF007C088 |
| :101B00002DF029EC29F02BC000F02CC001F02DC0E5 |
| :101B100002F02EC003F000C030F001C031F002C06E |
| :101B200032F003C033F0BEC12BF0BFC12CF0C0C1F6 |
| :101B30002DF0C1C12EF044EC29F02BC0DEFF2CC0EB |
| :101B4000DEFF2DC0DEFF2EC0DDFFDD52DD52D9CF1E |
| :101B5000E9FFDACFEAFFEECF00F0EECF01F0EECFF3 |
| :101B600002F0EFCF03F0306A316A800E326E4D0E14 |
| :101B7000336E00C02BF001C02CF002C02DF003C06A |
| :101B80002EF02EEC2AF0E8EC2AF0080E2AC0DBFF3B |
| :101B9000090E2BC0DBFF0A0E2CC0DBFF0B0E2DC085 |
| :101BA000DBFF040E006E190EDBCFE7FF0050E75E8F |
| :101BB000190EE7CFDBFF1A0EDB06DB40E8403F0BD8 |
| :101BC000006E190EDB50200DF35000100101B16FB3 |
| :101BD0001A0EDB50030B400DF3CFB2F1040EDBCF36 |
| :101BE00000F0050EDBCF01F0060EDBCF02F0070E92 |
| :101BF000DBCF03F0040ED890033202320132003200 |
| :101C0000E806F9E13F0E046E056A066A076A0450A9 |
| :101C10000016055001160650021607500316005014 |
| :101C20000101B2130F0E006E016A026A036AD950F5 |
| :101C3000040FE96EDACFEAFFEE500016EE500116FF |
| :101C4000EE500216EE500316040E1F0B07E0D8905C |
| :101C50000036013602360336E806F9E1080EDBCF1E |
| :101C600004F0090EDBCF05F00A0EDBCF06F00B0EF9 |
| :101C7000DBCF07F0180ED890073206320532043257 |
| :101C8000E806F9E104500012055001120650021254 |
| :101C90000750031200C0B3F1080EDBCF00F0090EAD |
| :101CA000DBCF01F00A0EDBCF02F00B0EDBCF03F02F |
| :101CB000100ED8900332023201320032E806F9E108 |
| :101CC00000C0B4F1080EDBCF00F0090EDBCF01F04D |
| :101CD0000A0EDBCF02F00B0EDBCF03F0080ED8901C |
| :101CE0000332023201320032E806F9E100C0B5F1F8 |
| :101CF000080EDBCFB6F11F0EE15C02E2E16AE552AD |
| :101D0000E16EE552E7CFD9FF1200D9CFE6FFE1CF70 |
| :101D1000D9FF0A0EE1260101DE5101E148D1ADDC17 |
| :101D2000070EDE6EDD6ADECF00F0DDCF01F001349C |
| :101D300004E200500C08000E01542CE3C580C5B02D |
| :101D4000FED716EC2EF001010151E824E66E27ECD7 |
| :101D50002DF0E552DFCFE6FF27EC2DF0E552DECF88 |
| :101D6000E9FFDDCFEAFF070EE95E000EEA5AB10E89 |
| :101D7000E926010EEA22EF50E66E27EC2DF0E5523F |
| :101D8000C584C5B4FED716EC2EF0DF2A010E01E3A0 |
| :101D9000DB2AC9D782DCC6C1E6FFC7C1E6FFC8C1DE |
| :101DA000E6FFC9C1E6FF0DD9E552E552E552E5521D |
| :101DB000020E2AC0DBFF030E2BC0DBFF040E2CC07B |
| :101DC000DBFF050E2DC0DBFF020EDBCF00F0030EA4 |
| :101DD000DBCF01F0040EDBCF02F0050EDBCF03F00A |
| :101DE000CAC130F0CBC131F0CCC132F0CDC133F03B |
| :101DF00000C02BF001C02CF002C02DF003C02EF06B |
| :101E000028EC2BF0010A2BE0020EDBCF00F0030ED2 |
| :101E1000DBCF01F0040EDBCF02F0050EDBCF03F0C9 |
| :101E2000CAC130F0CBC131F0CCC132F0CDC133F0FA |
| :101E300000C02BF001C02CF002C02DF003C02EF02A |
| :101E400044EC29F0060E2BC0DBFF070E2CC0DBFF95 |
| :101E5000080E2DC0DBFF090E2EC0DBFF2AD0020EBC |
| :101E6000DBCF00F0030EDBCF01F0040EDBCF02F07E |
| :101E7000050EDBCF03F000C030F001C031F002C02E |
| :101E800032F003C033F0CAC12BF0CBC12CF0CCC16F |
| :101E90002DF0CDC12EF044EC29F0060E2BC0DBFF57 |
| :101EA000070E2CC0DBFF080E2DC0DBFF090E2EC075 |
| :101EB000DBFFC2C130F0C3C131F0C4C132F0C5C1D3 |
| :101EC00033F0BAC12BF0BBC12CF0BCC12DF0BDC1A9 |
| :101ED0002EF0DBEC29F02BC000F02CC001F02DC05F |
| :101EE00002F02EC003F0CEC130F0CFC131F0D0C12E |
| :101EF00032F0D1C133F000C02BF001C02CF002C091 |
| :101F00002DF003C02EF01FEC2BF0010A1DE0060E91 |
| :101F1000DBCF04F0070EDBCF05F0080EDBCF06F0B9 |
| :101F2000090EDBCF07F0306A316A326A3F0E336E3A |
| :101F300004C02BF005C02CF006C02DF007C02EF019 |
| :101F40001FEC2BF0010A16E1A5EC0BF0BEC1C2F1AB |
| :101F5000BFC1C3F1C0C1C4F1C1C1C5F1020EDBCF25 |
| :101F6000CAF1030EDBCFCBF1040EDBCFCCF1050EB3 |
| :101F7000DBCFCDF101010D510DE0D2C1E6FFD3C1A0 |
| :101F8000E6FFD4C1E6FFD5C1E6FF24DAE552E5520B |
| :101F9000E552E552D2C1E6FFD3C1E6FFD4C1E6FF68 |
| :101FA000D5C1E6FF8ADAE552E552E552E5520A0E5E |
| :101FB000E15C02E2E16AE552E16EE552E7CFD9FF6A |
| :101FC0001200D9CFE6FFE1CFD9FF0E0EE126E00ED9 |
| :101FD0000101B115E00BE838E840040FE76E050E8B |
| :101FE000E7CFDBFF060E016EC00EB21501C0E7FFA2 |
| :101FF000E75204E0E8427F0BE706FCE1006E1F0EAB |
| :102000000101B115040DF3500024E76E040EE7CF73 |
| :10201000DBFFDB2A3F0EB215006E016A026A036A1B |
| :10202000040E1F0B07E0D890003601360236033647 |
| :10203000E806F9E1F00E0101B315046E056A066ABF |
| :10204000076A040ED8900732063205320432E806D9 |
| :10205000F9E1045000120550011206500212075017 |
| :102060000312060E00C0DBFF070E01C0DBFF080EE7 |
| :1020700002C0DBFF090E03C0DBFF0F0E0101B31529 |
| :10208000006E016A026A036A180E1F0B07E0D890FF |
| :102090000036013602360336E806F9E10A0E00C0C2 |
| :1020A000DBFF0B0E01C0DBFF0C0E02C0DBFF0D0ED1 |
| :1020B00003C0DBFFB4C100F0016A026A036A100EBC |
| :1020C0001F0B07E0D8900036013602360336E806CB |
| :1020D000F9E1D9500A0FE96EDACFEAFF0050EE2697 |
| :1020E0000150EE220250EE220350EE22B5C100F064 |
| :1020F000016A026A036A080E1F0B07E0D8900036D7 |
| :10210000013602360336E806F9E1D9500A0FE96EC6 |
| :10211000DACFEAFF0050EE260150EE220250EE2206 |
| :102120000350EE22B6C100F0016A026A036AD95078 |
| :102130000A0FE96EDACFEAFF0050EE260150EE22D8 |
| :102140000250EE220350EE22060EDBCF04F0070E03 |
| :10215000DBCF05F0080EDBCF06F0090EDBCF07F072 |
| :1021600004C02AF005C02BF006C02CF007C02DF0EB |
| :1021700029EC29F02BC000F02CC001F02DC002F09A |
| :102180002EC003F00A0EDBCF10F00B0EDBCF11F0E8 |
| :102190000C0EDBCF12F00D0EDBCF13F010C02AF0C7 |
| :1021A00011C02BF012C02CF013C02DF029EC29F037 |
| :1021B0002BC00CF02CC00DF02DC00EF02EC00FF077 |
| :1021C000306A316A800E326E4D0E336E0CC02BF0C9 |
| :1021D0000DC02CF00EC02DF00FC02EF0DBEC29F05E |
| :1021E0002BC008F02CC009F02DC00AF02EC00BF057 |
| :1021F00008C030F009C031F00AC032F00BC033F033 |
| :1022000000C02BF001C02CF002C02DF003C02EF056 |
| :1022100045EC29F02BC0BEF12CC0BFF12DC0C0F1A0 |
| :102220002EC0C1F1C2C130F0C3C131F0C4C132F01F |
| :10223000C5C133F0BEC12BF0BFC12CF0C0C12DF021 |
| :10224000C1C12EF028EC2BF0010A1BE0C2C130F016 |
| :10225000C3C131F0C4C132F0C5C133F0BEC12BF0EF |
| :10226000BFC12CF0C0C12DF0C1C12EF044EC29F04B |
| :102270002BC0BAF12CC0BBF12DC0BCF12EC0BDF1FA |
| :102280001AD0BEC130F0BFC131F0C0C132F0C1C1FF |
| :1022900033F0C2C12BF0C3C12CF0C4C12DF0C5C1B5 |
| :1022A0002EF044EC29F02BC0BAF12CC0BBF12DC0AC |
| :1022B000BCF12EC0BDF1FB0EDBCF08F0FC0EDBCF76 |
| :1022C00009F0FD0EDBCF0AF0FE0EDBCF0BF0BEC136 |
| :1022D00030F0BFC131F0C0C132F0C1C133F008C02D |
| :1022E0002BF009C02CF00AC02DF00BC02EF02EEC04 |
| :1022F0002AF02BC004F02CC005F02DC006F02EC033 |
| :1023000007F0050EDBCF10F010C02DF003EC29F024 |
| :102310002BC00CF02CC00DF02DC00EF02EC00FF015 |
| :102320000CC030F00DC031F00EC032F00FC033F0F1 |
| :1023300004C02BF005C02CF006C02DF007C02EF015 |
| :10234000DBEC29F02BC000F02CC001F02DC002F016 |
| :102350002EC003F0040EDBCF15F015C02DF003ECFA |
| :1023600029F02BC011F02CC012F02DC013F02EC09C |
| :1023700014F011C030F012C031F013C032F014C0AC |
| :1023800033F000C02BF001C02CF002C02DF003C0D0 |
| :102390002EF0DBEC29F02BC0DEFF2CC0DEFF2DC0C1 |
| :1023A000DEFF2EC0DDFFDD52DD52DECF2AF0DECFB4 |
| :1023B0002BF0DECF2CF0DDCF2DF0DD52DD520E0EF6 |
| :1023C000E15C03E200D0E16AE552E16EE552E7CF5D |
| :1023D000D9FF1200D9CFE6FFE1CFD9FFFB0EDBCF4B |
| :1023E00000F0FC0EDBCF01F0FD0EDBCF02F0FE0EA5 |
| :1023F000DBCF03F070C030F071C031F072C032F04A |
| :1024000073C033F000C02BF001C02CF002C02DF0DF |
| :1024100003C02EF028EC2BF0010A03E18992899089 |
| :1024200048D0FB0EDBCF00F0FC0EDBCF01F0FD0E41 |
| :10243000DBCF02F0FE0EDBCF03F074C030F075C0CE |
| :1024400031F076C032F077C033F000C02BF001C01D |
| :102450002CF002C02DF003C02EF028EC2BF0010A66 |
| :1024600003E18992898025D0FB0EDBCF00F0FC0EC2 |
| :10247000DBCF01F0FD0EDBCF02F0FE0EDBCF03F071 |
| :1024800078C030F079C031F07AC032F07BC033F0E0 |
| :1024900000C02BF001C02CF002C02DF003C02EF0C4 |
| :1024A00028EC2BF0010A03E18982899002D089820D |
| :1024B0008980E552E7CFD9FF1200D9CFE6FFE1CFFF |
| :1024C000D9FFE65289968998899A8A948A968A9839 |
| :1024D0008A9AFB0EDBCF00F0FC0EDBCF01F0FD0E85 |
| :1024E000DBCF02F0FE0EDBCF03F09CC030F09DC0CE |
| :1024F00031F09EC032F09FC033F000C02BF001C01D |
| :102500002CF002C02DF003C02EF028EC2BF0010AB5 |
| :1025100004E18986010EDF6EDBD0FB0EDBCF00F01D |
| :10252000FC0EDBCF01F0FD0EDBCF02F0FE0EDBCFA9 |
| :1025300003F0A0C030F0A1C031F0A2C032F0A3C0BF |
| :1025400033F000C02BF001C02CF002C02DF003C00E |
| :102550002EF028EC2BF0010A04E18988020EDF6ED0 |
| :10256000B7D0FB0EDBCF00F0FC0EDBCF01F0FD0E91 |
| :10257000DBCF02F0FE0EDBCF03F0A4C030F0A5C02D |
| :1025800031F0A6C032F0A7C033F000C02BF001C07C |
| :102590002CF002C02DF003C02EF01FEC2BF0010A2E |
| :1025A00004E0898A040EDF6E93D0FB0EDBCF00F0CF |
| :1025B000FC0EDBCF01F0FD0EDBCF02F0FE0EDBCF19 |
| :1025C00003F0A8C030F0A9C031F0AAC032F0ABC00F |
| :1025D00033F000C02BF001C02CF002C02DF003C07E |
| :1025E0002EF028EC2BF0010A04E18A84080EDF6E3D |
| :1025F0006FD0FB0EDBCF00F0FC0EDBCF01F0FD0E49 |
| :10260000DBCF02F0FE0EDBCF03F0ACC030F0ADC08C |
| :1026100031F0AEC032F0AFC033F000C02BF001C0DB |
| :102620002CF002C02DF003C02EF028EC2BF0010A94 |
| :1026300004E18A86100EDF6E4BD0FB0EDBCF00F07C |
| :10264000FC0EDBCF01F0FD0EDBCF02F0FE0EDBCF88 |
| :1026500003F0B0C030F0B1C031F0B2C032F0B3C05E |
| :1026600033F000C02BF001C02CF002C02DF003C0ED |
| :102670002EF028EC2BF0010A04E18A88200EDF6E90 |
| :1026800027D0FB0EDBCF00F0FC0EDBCF01F0FD0E00 |
| :10269000DBCF02F0FE0EDBCF03F0B4C030F0B5C0EC |
| :1026A00031F0B6C032F0B7C033F000C02BF001C03B |
| :1026B0002CF002C02DF003C02EF028EC2BF0010A04 |
| :1026C00004E18A8A400EDF6E03D08A8A800EDF6EB4 |
| :1026D000C580C5B0FED716EC2EF0720EE66E27EC64 |
| :1026E0002DF0E552DFCFE6FF27EC2DF0E552C58453 |
| :1026F000C5B4FED716EC2EF0E552E552E7CFD9FF70 |
| :102700001200D9CFE6FFE1CFD9FFFB0EDBCF0CF0F3 |
| :10271000FC0EDBCF0DF0FD0EDBCF0EF0FE0EDBCF9F |
| :102720000FF0DAC12AF0DBC12BF0DCC12CF0DDC1E7 |
| :102730002DF02BEC29F02BC014F02CC015F02DC07F |
| :1027400016F02EC017F0306A316A326A4A0E336EC4 |
| :1027500014C02BF015C02CF016C02DF017C02EF0B1 |
| :10276000DBEC29F02BC010F02CC011F02DC012F0C2 |
| :102770002EC013F010C030F011C031F012C032F092 |
| :1027800013C033F00CC02BF00DC02CF00EC02DF098 |
| :102790000FC02EF044EC29F02BC008F02CC009F03B |
| :1027A0002DC00AF02EC00BF0D6C12AF0D7C12BF0F5 |
| :1027B000D8C12CF0D9C12DF029EC29F02BC018F08C |
| :1027C0002CC019F02DC01AF02EC01BF018C030F02C |
| :1027D00019C031F01AC032F01BC033F008C02BF022 |
| :1027E00009C02CF00AC02DF00BC02EF02EEC2AF000 |
| :1027F0002BC004F02CC005F02DC006F02EC007F051 |
| :10280000306A316A326A4A0E336E04C02BF005C05A |
| :102810002CF006C02DF007C02EF0DBEC29F02BC009 |
| :1028200000F02CC001F02DC002F02EC003F000C05B |
| :10283000E6FF01C0E6FF02C0E6FF03C0E6FFD1EC01 |
| :102840000BF0E552E552E552E55285EC0EF0E5520B |
| :10285000E7CFD9FF1200D9CFE6FFE1CFD9FFE6528B |
| :1028600001019F51090DF3CFE9FFF4CFEAFF0E0EEE |
| :10287000E926010EEA22EE52040EEE1801E1ED50B7 |
| :1028800061E1DF6A040EDF5C27E201019F51090D5F |
| :10289000F3CFE9FFF4CFEAFF0E0EE926010EEA229C |
| :1028A000030EE926000EEA22E9CF00F0EACF01F09C |
| :1028B000DF500F010024E96E000E0120EA6EEF5098 |
| :1028C000E66EDF50EA6AA10FE96E010EEA22E552D8 |
| :1028D000E750EF6EDF2AD6D7A1C12AF0A2C12BF0B4 |
| :1028E000A3C12CF0A4C12DF029EC29F02BC000F0DD |
| :1028F0002CC001F02DC002F02EC003F0306A316A06 |
| :10290000326A4A0E336E00C02BF001C02CF002C0B8 |
| :102910002DF003C02EF0DBEC29F02BC0D2F12CC03F |
| :10292000D3F12DC0D4F12EC0D5F1D2C1E6FFD3C171 |
| :10293000E6FFD4C1E6FFD5C1E6FFE3DEE552E5528E |
| :10294000E552E552E552E552E7CFD9FF1200D9CF63 |
| :10295000E6FFE1CFD9FFE65201019F51090DF3CF08 |
| :10296000E9FFF4CFEAFF0E0EE926010EEA22EE524D |
| :10297000060EEE1801E1ED504EE1DF6A060EDF5C57 |
| :1029800027E201019F51090DF3CFE9FFF4CFEAFFE0 |
| :102990000E0EE926010EEA22030EE926000EEA22B7 |
| :1029A000E9CF00F0EACF01F0DF500F010024E96E1B |
| :1029B000000E0120EA6EEF50E66EDF50EA6AB10FBA |
| :1029C000E96E010EEA22E552E750EF6EDF2AD6D714 |
| :1029D000EC0EE66E910EE66EE40EE66E420EE66ECC |
| :1029E000E1EC0FF0E552E552E552E5522AC0D2F192 |
| :1029F0002BC0D3F12CC0D4F12DC0D5F1D2C1E6FF4C |
| :102A0000D3C1E6FFD4C1E6FFD5C1E6FF7ADEE552C9 |
| :102A1000E552E552E552E552E552E7CFD9FF120003 |
| :102A2000D9CFE6FFE1CFD9FF020EE12601019F5188 |
| :102A3000090DF3CFE9FFF4CFEAFF0E0EE926010EF0 |
| :102A4000EA22EE52040EEE1801E1ED5001E09ED0B4 |
| :102A5000DE6ADD6ADECF00F0DDCF01F0D8900150F4 |
| :102A600004E6040E005C000E01582AE29F51090D95 |
| :102A7000F3CFE9FFF4CFEAFF0E0EE926010EEA22BA |
| :102A8000030EE926000EEA22E9CF00F0EACF01F0BA |
| :102A9000DE500024E96EDD500120EA6EEF50E66E54 |
| :102AA000DECFE9FFDDCFEAFFA50EE926010EEA221F |
| :102AB000E552E750EF6EDF2A010E01E3DB2ACAD7A9 |
| :102AC000A5C12AF0A6C12BF0A7C12CF0A8C12DF0FA |
| :102AD00029EC29F02BC000F02CC001F02DC002F031 |
| :102AE0002EC003F0306A316A800E326E4B0E336EA8 |
| :102AF00000C02BF001C02CF002C02DF003C02EF05E |
| :102B0000DBEC29F02BC0C6F12CC0C7F12DC0C8F1F9 |
| :102B10002EC0C9F1DE6ADD6ADECF00F0DDCF01F044 |
| :102B2000D890015004E6040E005C000E015822E229 |
| :102B3000DECFE9FFDDCFEAFFA50EE926010EEA228E |
| :102B4000EF50E66EDECF00F0DDCF01F0010E002683 |
| :102B5000000E012200C0E6FF01C0E6FF60EC2DF090 |
| :102B6000E552E552E5521DEC2EF0DF2A010E01E39D |
| :102B7000DB2AD2D7550EE66E000EE66EE66A60ECF2 |
| :102B80002DF0E552E552E5521DEC2EF0020EE15C0F |
| :102B900002E2E16AE552E16EE552E7CFD9FF1200A9 |
| :102BA000D9CFE6FFE1CFD9FFE65201019F51090DD0 |
| :102BB000F3CFE9FFF4CFEAFF0E0EE926010EEA2279 |
| :102BC000EE52040EEE1801E1ED5051E1DF6A040E01 |
| :102BD000DF5C27E201019F51090DF3CFE9FFF4CF3C |
| :102BE000EAFF0E0EE926010EEA22030EE926000E88 |
| :102BF000EA22E9CF00F0EACF01F0DF500F01002414 |
| :102C0000E96E000E0120EA6EEF50E66EDF50EA6AD0 |
| :102C1000A10FE96E010EEA22E552E750EF6EDF2ABE |
| :102C2000D6D7DF6A040EDF5C16E2DF50EA6AA10F36 |
| :102C3000E96E010EEA22EF50E66E050EDF24010F69 |
| :102C4000E66EE66A60EC2DF0E552E552E5521DECC9 |
| :102C50002EF0DF2AE7D7550EE66E050EE66EE66A21 |
| :102C600060EC2DF0E552E552E5521DEC2EF0E552F8 |
| :102C7000E552E7CFD9FF1200D9CFE6FFE1CFD9FF68 |
| :102C80000D0EE12601019F51090DF3CFE9FFF4CFAD |
| :102C9000EAFF0E0EE926010EEA22EE52080EEE18A9 |
| :102CA00001E1ED5002E074EF1AF0050EDAC1DBFF2E |
| :102CB000060EDBC1DBFF070EDCC1DBFF080EDDC14A |
| :102CC000DBFF010ED6C1DBFF020ED7C1DBFF030E17 |
| :102CD000D8C1DBFF040ED9C1DBFFDF6A040EDF5C65 |
| :102CE00027E201019F51090DF3CFE9FFF4CFEAFF7D |
| :102CF0000E0EE926010EEA22030EE926000EEA2254 |
| :102D0000E9CF00F0EACF01F0DF500F010024E96EB7 |
| :102D1000000E0120EA6EEF50E66EDF50EA6ADA0F2D |
| :102D2000E96E010EEA22E552E750EF6EDF2AD6D7B0 |
| :102D3000DF6A040EDF5C28E201019F51090DF3CF29 |
| :102D4000E9FFF4CFEAFF0E0EE926010EEA22030E98 |
| :102D5000E926000EEA22E9CF00F0EACF01F0040EE6 |
| :102D6000DF240F010024E96E000E0120EA6EEF500F |
| :102D7000E66EDF50EA6AD60FE96E010EEA22E552EE |
| :102D8000E750EF6EDF2AD5D7DF6A040EDF5C16E26C |
| :102D9000DF50EA6ADA0FE96E010EEA22EF50E66EC2 |
| :102DA0000D0EDF24010FE66EE66A60EC2DF0E552B1 |
| :102DB000E552E5521DEC2EF0DF2AE7D7DF6A040E5C |
| :102DC000DF5C16E2DF50EA6AD60FE96E010EEA22F6 |
| :102DD000EF50E66E0D0EDF24050FE66EE66A60EC3E |
| :102DE0002DF0E552E552E5521DEC2EF0DF2AE7D733 |
| :102DF000550EE66E0D0EE66EE66A60EC2DF0E552BD |
| :102E0000E552E5521DEC2EF0DF6A030EDF5C01E3B4 |
| :102E1000B3D1DF50040DF3CFE9FFF4CFEAFF700E1A |
| :102E2000E926000EEA22EECF08F0EECF09F0EECF51 |
| :102E30000AF0EFCF0BF0010EDBCF14F0020EDBCF68 |
| :102E400015F0030EDBCF16F0040EDBCF17F014C025 |
| :102E50002AF015C02BF016C02CF017C02DF029EC6D |
| :102E600029F02BC010F02CC011F02DC012F02EC094 |
| :102E700013F0306A316A326A4A0E336E10C02BF09A |
| :102E800011C02CF012C02DF013C02EF0DBEC29F095 |
| :102E90002BC00CF02CC00DF02DC00EF02EC00FF08A |
| :102EA0000CC030F00DC031F00EC032F00FC033F066 |
| :102EB00008C02BF009C02CF00AC02DF00BC02EF07A |
| :102EC000DBEC29F02BC004F02CC005F02DC006F07F |
| :102ED0002EC007F0306A316A800E326E400E336EBB |
| :102EE00004C02BF005C02CF006C02DF007C02EF05A |
| :102EF000DBEC29F02BC000F02CC001F02DC002F05B |
| :102F00002EC003F0050EDBCF20F0060EDBCF21F044 |
| :102F1000070EDBCF22F0080EDBCF23F020C02AF013 |
| :102F200021C02BF022C02CF023C02DF02BEC29F077 |
| :102F30002BC01CF02CC01DF02DC01EF02EC01FF0A9 |
| :102F4000306A316A326A4A0E336E1CC02BF01DC0E3 |
| :102F50002CF01EC02DF01FC02EF0DBEC29F02BC092 |
| :102F600018F02CC019F02DC01AF02EC01BF018C09C |
| :102F700030F019C031F01AC032F01BC033F000C07D |
| :102F80002BF001C02CF002C02DF003C02EF045EC58 |
| :102F900029F0090E2BC0DBFF0A0E2CC0DBFF0B0E45 |
| :102FA0002DC0DBFF0C0E2EC0DBFF090EDBCF0CF0BB |
| :102FB0000A0EDBCF0DF00B0EDBCF0EF00C0EDBCFCD |
| :102FC0000FF0DAC12AF0DBC12BF0DCC12CF0DDC13F |
| :102FD0002DF02BEC29F02BC014F02CC015F02DC0D7 |
| :102FE00016F02EC017F0306A316A326A4A0E336E1C |
| :102FF00014C02BF015C02CF016C02DF017C02EF009 |
| :10300000DBEC29F02BC010F02CC011F02DC012F019 |
| :103010002EC013F010C030F011C031F012C032F0E9 |
| :1030200013C033F00CC02BF00DC02CF00EC02DF0EF |
| :103030000FC02EF044EC29F02BC008F02CC009F092 |
| :103040002DC00AF02EC00BF0D6C12AF0D7C12BF04C |
| :10305000D8C12CF0D9C12DF029EC29F02BC01CF0DF |
| :103060002CC01DF02DC01EF02EC01FF0306A316A3A |
| :10307000326A4A0E336E1CC02BF01DC02CF01EC0ED |
| :103080002DF01FC02EF0DBEC29F02BC018F02CC067 |
| :1030900019F02DC01AF02EC01BF018C030F019C066 |
| :1030A00031F01AC032F01BC033F008C02BF009C059 |
| :1030B0002CF00AC02DF00BC02EF02EEC2AF02BC005 |
| :1030C00004F02CC005F02DC006F02EC007F0306AC9 |
| :1030D000316A800E326E400E336E04C02BF005C094 |
| :1030E0002CF006C02DF007C02EF02EEC2AF02BC0DD |
| :1030F00000F02CC001F02DC002F02EC003F0DF5014 |
| :10310000040DF3CFE9FFF4CFEAFF700EE926000EBD |
| :10311000EA2200C0EEFF01C0EEFF02C0EEFF03C0D6 |
| :10312000EEFFDF50040DF3CFE9FFF4CFEAFF700E9E |
| :10313000E926000EEA22EECFE6FFEECFE6FFEECF65 |
| :10314000E6FFEFCFE6FFB7EC04F0E552E552E552BB |
| :10315000E552F3CF00F0F4CF01F0EA6ADF34FE0B62 |
| :10316000EA36E96E600EE926000EEA2200C0EEFFA4 |
| :1031700001C0EDFFDF2A49D6DF6A070EDF5C01E3FD |
| :10318000B3D1DF50040DF3CFE9FFF4CFEAFF9C0E7B |
| :10319000E926000EEA22EECF08F0EECF09F0EECFDE |
| :1031A0000AF0EFCF0BF0010EDBCF14F0020EDBCFF5 |
| :1031B00015F0030EDBCF16F0040EDBCF17F014C0B2 |
| :1031C0002AF015C02BF016C02CF017C02DF029ECFA |
| :1031D00029F02BC010F02CC011F02DC012F02EC021 |
| :1031E00013F0306A316A326A4A0E336E10C02BF027 |
| :1031F00011C02CF012C02DF013C02EF0DBEC29F022 |
| :103200002BC00CF02CC00DF02DC00EF02EC00FF016 |
| :103210000CC030F00DC031F00EC032F00FC033F0F2 |
| :1032200008C02BF009C02CF00AC02DF00BC02EF006 |
| :10323000DBEC29F02BC004F02CC005F02DC006F00B |
| :103240002EC007F0306A316A800E326E400E336E47 |
| :1032500004C02BF005C02CF006C02DF007C02EF0E6 |
| :10326000DBEC29F02BC000F02CC001F02DC002F0E7 |
| :103270002EC003F0050EDBCF20F0060EDBCF21F0D1 |
| :10328000070EDBCF22F0080EDBCF23F020C02AF0A0 |
| :1032900021C02BF022C02CF023C02DF02BEC29F004 |
| :1032A0002BC01CF02CC01DF02DC01EF02EC01FF036 |
| :1032B000306A316A326A4A0E336E1CC02BF01DC070 |
| :1032C0002CF01EC02DF01FC02EF0DBEC29F02BC01F |
| :1032D00018F02CC019F02DC01AF02EC01BF018C029 |
| :1032E00030F019C031F01AC032F01BC033F000C00A |
| :1032F0002BF001C02CF002C02DF003C02EF045ECE5 |
| :1033000029F0090E2BC0DBFF0A0E2CC0DBFF0B0ED1 |
| :103310002DC0DBFF0C0E2EC0DBFF090EDBCF0CF047 |
| :103320000A0EDBCF0DF00B0EDBCF0EF00C0EDBCF59 |
| :103330000FF0DAC12AF0DBC12BF0DCC12CF0DDC1CB |
| :103340002DF02BEC29F02BC014F02CC015F02DC063 |
| :1033500016F02EC017F0306A316A326A4A0E336EA8 |
| :1033600014C02BF015C02CF016C02DF017C02EF095 |
| :10337000DBEC29F02BC010F02CC011F02DC012F0A6 |
| :103380002EC013F010C030F011C031F012C032F076 |
| :1033900013C033F00CC02BF00DC02CF00EC02DF07C |
| :1033A0000FC02EF044EC29F02BC008F02CC009F01F |
| :1033B0002DC00AF02EC00BF0D6C12AF0D7C12BF0D9 |
| :1033C000D8C12CF0D9C12DF029EC29F02BC01CF06C |
| :1033D0002CC01DF02DC01EF02EC01FF0306A316AC7 |
| :1033E000326A4A0E336E1CC02BF01DC02CF01EC07A |
| :1033F0002DF01FC02EF0DBEC29F02BC018F02CC0F4 |
| :1034000019F02DC01AF02EC01BF018C030F019C0F2 |
| :1034100031F01AC032F01BC033F008C02BF009C0E5 |
| :103420002CF00AC02DF00BC02EF02EEC2AF02BC091 |
| :1034300004F02CC005F02DC006F02EC007F0306A55 |
| :10344000316A800E326E400E336E04C02BF005C020 |
| :103450002CF006C02DF007C02EF02EEC2AF02BC069 |
| :1034600000F02CC001F02DC002F02EC003F0DF50A0 |
| :10347000040DF3CFE9FFF4CFEAFF9C0EE926000E1E |
| :10348000EA2200C0EEFF01C0EEFF02C0EEFF03C063 |
| :10349000EEFFDF50040DF3CFE9FFF4CFEAFF9C0EFF |
| :1034A000E926000EEA22EECFE6FFEECFE6FFEECFF2 |
| :1034B000E6FFEFCFE6FFB7EC04F0E552E552E55248 |
| :1034C000E552F3CF00F0F4CF01F0EA6ADF34FE0BEF |
| :1034D000EA36E96E8C0EE926000EEA2200C0EEFF05 |
| :1034E00001C0EDFFDF2A49D60D0EE15C02E2E16A80 |
| :1034F000E552E16EE552E7CFD9FF1200D9CFE6FFE2 |
| :10350000E1CFD9FF040EE12601019F51090DF3CF50 |
| :10351000E9FFF4CFEAFF0E0EE926010EEA22EE5291 |
| :10352000020EEE1801E1ED5001E098D09F51090D17 |
| :10353000F3CFE9FFF4CFEAFF0E0EE926010EEA22EF |
| :10354000030EE926000EEA22EFCFDFFF9F51090D9F |
| :10355000F3CFE9FFF4CFEAFF0E0EE926010EEA22CF |
| :10356000030EE926000EEA22010EE926000EEA22E9 |
| :10357000010EEFCFDBFF000EDFCF2CF0010EDBCF13 |
| :103580002DF014EC29F02BC000F02CC001F02DC060 |
| :1035900002F02EC003F0306A240E316E740E326ECB |
| :1035A000490E336E00C02BF001C02CF002C02DF08C |
| :1035B00003C02EF0DBEC29F02BC0CEF12CC0CFF1F4 |
| :1035C0002DC0D0F12EC0D1F1020EDB6A030EDB6AF2 |
| :1035D000020EDBCF00F0030EDBCF01F0020E005C29 |
| :1035E000000E01582FE2D9CF00F0DACF01F0020E21 |
| :1035F000DB500024E96E030EDB500120EA6EEF5031 |
| :10360000E66E0A0EE76E020EDBCF02F0030EDBCF92 |
| :1036100003F0E7500226000E0322010E0226000EE0 |
| :10362000032202C0E6FF03C0E6FF60EC2DF0E55286 |
| :10363000E552E5521DEC2EF0020EDB2A030E01E3EB |
| :10364000DB2AC6D7550EE66E0A0EE66EE66A60EC19 |
| :103650002DF0E552E552E5521DEC2EF0040EE15C32 |
| :1036600002E2E16AE552E16EE552E7CFD9FF1200CE |
| :10367000D9CFE6FFE1CFD9FFE652A09A6A6A686A1D |
| :10368000160E6F6E9F0E6B6E7B0E696E6D8C6E6A82 |
| :10369000010EE66EE66AE66A710EE66E0F0EE66EE3 |
| :1036A000BBEC2DF0006E050EE15E00506D9CDF6AF4 |
| :1036B000DF50006E016A080E005C000E015810E237 |
| :1036C000DF50040DF3CFE9FFF4CFEAFF000EE92647 |
| :1036D000040EEA22EE6AEE6AEE6AEE6ADF2AE8D7A4 |
| :1036E000160E706E68A602D06896FCD70001CB6BF0 |
| :1036F000D06BD16BD26B6D98DF6A020EDF5C18E283 |
| :10370000EA6ADF34FE0BEA36E96EC30EE926000EE4 |
| :10371000EA22EE6AED6AEA6ADF34FE0BEA36E96E07 |
| :10372000BF0EE926000EEA22EE6AED6ADF2AE5D72F |
| :103730000001080EC36F040EC46FB96BB86BE5527D |
| :10374000E552E7CFD9FF1200D9CFE6FFE1CFD9FF8D |
| :10375000E6520001B85116E106D06D6A696A0001AF |
| :10376000B86BA19AA8D06D6A696A160E6F6E9F0E2B |
| :103770006B6E7B0E696E6DB602D06D86FCD7000154 |
| :10378000010EB86FB80508E16DBA06D0686A696ABB |
| :1037900069806988020EB86F6850040B05E06950B3 |
| :1037A000040B02E06894B7D86DA202D0A19A83D02E |
| :1037B0006850010B12E06950010B0FE059DF000166 |
| :1037C000040EB86F0401200E026F040E036F080E82 |
| :1037D000016F006B8C0E001368906850100B05E0B1 |
| :1037E0006950100B02E085D868986850400B13E0D0 |
| :1037F0006950400B10E0010EE66EE66A000EE66EC0 |
| :10380000E66A730EE66EE66A4BEC2CF0006E060E6E |
| :10381000E15E0050689C6850200B04E06950200B6A |
| :1038200001E04ED86850020B13E06950020B10E023 |
| :10383000010EE66EE66A000EE66EE66AE6687F0E48 |
| :10384000E66E4BEC2CF0006E060EE15E00506A6AEC |
| :10385000040E0001E76EB819E8AE02D0E73402D0DA |
| :10386000E750B85D02E2A19A26D069A623D0DF6AAC |
| :10387000040EDF5C1FE268A61AD06CCFD8F0689601 |
| :10388000780E0001D81502E15BD810D0000EE66E6C |
| :10389000E66AD80EE66E000EE66E720EE66EE66A18 |
| :1038A0004BEC2CF0006E060EE15E005001D002D011 |
| :1038B000DF2ADED7A19AE552E552E7CFD9FF120001 |
| :1038C00070A015D0BBC0E9FFBCC0EAFFEF50800874 |
| :1038D0000DE1C3C0E9FFC4C0EAFFEF50840806E170 |
| :1038E000BBC0E9FFBCC0EAFF8C0EEF6E7090689A17 |
| :1038F0001200698468986D82000EE66EE66AE66ED4 |
| :10390000E66A750EE66EE66A4BEC2CF0006E060E6B |
| :10391000E15E00501200000EE66EE66AE66EE66AB0 |
| :10392000740EE66EE66A4BEC2CF0006E060EE15E5D |
| :1039300000506D92699468A402D06894FCD712007C |
| :10394000D9CFE6FFE1CFD9FFE652FD0E0001D81531 |
| :103950005AE17E0ED815E8407F0B040DF3CFBBF083 |
| :10396000F4CFBCF0000EBB27040EBC23BBC0BDF0DF |
| :10397000BCC0BEF0BD75BBC0E9FFBCC0EAFFEF50E4 |
| :103980003C0BE842E8420D083CE1BBC0E9FFBCC08B |
| :10399000EAFF020EE926000EEA22EECF00F0EFCF9A |
| :1039A00001F0280E001802E1040E011828E1BBC046 |
| :1039B000E9FFBCC0EAFF020EE926000EEA22200E53 |
| :1039C000EE6E040EED6EDF6ADF50006E016A080EC7 |
| :1039D000005C000E015813E2DF50EA6A280FE96E1E |
| :1039E000040EEA22EF50E66EDF50EA6A200FE96E1D |
| :1039F000040EEA22E552E750EF6EDF2AE5D70DD834 |
| :103A000001D02ED805D0FD0ED815040801E14ED8FE |
| :103A1000E552E552E7CFD9FF1200C3C0E9FFC4C0A9 |
| :103A2000EAFFEF50800B05E0C3C0E9FFC4C0EAFF26 |
| :103A3000EF6A0001C76BC86BCC6BCD6BCB6BB6D894 |
| :103A4000000EE66EE66AE66EE66A030EE66EE66A6B |
| :103A50004BEC2CF0006E060EE15E005087EF1FF07D |
| :103A6000020E0001C85D02E1B2DB1FD06CD800017C |
| :103A7000D9511AE1BDC0E9FFBEC0EAFFEE52080EFF |
| :103A8000EF6EBDC0E9FFBEC0EAFF020EE926000EE0 |
| :103A9000EA22200EEE6E040EED6EBDC0E9FFBEC040 |
| :103AA000EAFF8C0EEF6E01D0D96B1200D9CFE6FF82 |
| :103AB000E1CFD9FFE652C3C0E9FFC4C0EAFFEF502F |
| :103AC000400B01E0010EDF6E0001C375080EB85D0A |
| :103AD0000AE122C46EFF6E50000803E2100EB86FB8 |
| :103AE00002D0040EB86FC80528E1C3C0E9FFC4C006 |
| :103AF000EAFF020EE926000EEA22280EEE6E040E00 |
| :103B0000ED6EDADA020E0001C75D07E1C3C0E9FF1E |
| :103B1000C4C0EAFF840EEF6E0FD0DF5007E1C3C0D0 |
| :103B2000E9FFC4C0EAFFC80EEF6E06D0C3C0E9FFCC |
| :103B3000C4C0EAFF880EEF6E01D005D8E552E55209 |
| :103B4000E7CFD9FF1200D9CFE6FFE1CFD9FF020EB0 |
| :103B5000E1260001C86BC3C0E9FFC4C0EAFFEF6AF9 |
| :103B6000040EC319006EC4C001F000C0DEFF01C026 |
| :103B7000DDFFDECFE9FFDDCFEAFFEF6AD0AF0CD08B |
| :103B8000D351D41107E005D0D4C0FAFF0001D351BE |
| :103B9000F96EFADF0001D09F020EE15C02E2E16AF9 |
| :103BA000E552E16EE552E7CFD9FF12000401205142 |
| :103BB000600BE842E842E842E842E842000901E0DE |
| :103BC00058D021510C0A54E00B0A43E00C0A35E0AE |
| :103BD000010A26E00B0A22E0020A20E0030A1CE0A8 |
| :103BE000080A10E0010A0CE00F0A08E0030A01E0ED |
| :103BF0003FD00001CB8F080EB86F3BD0C7D839D06B |
| :103C000083DB37D00001B90EC96F000ECA6FCB81BC |
| :103C1000010ECC6FCB8F2DD019D92BD02BD829D01A |
| :103C200024510001C96FCA6BBA0EC927000ECA23FE |
| :103C3000CB81010ECC6FCB8F1CD00001CB8F040148 |
| :103C40002451EA6ABA0FE96E000EEA2222C4EFFF9D |
| :103C500010D0000EE66EE66AE66EE66A020EE66ECA |
| :103C6000E66A4BEC2CF0006E060EE15E005001D0CF |
| :103C700000D01200D9CFE6FFE1CFD9FF040EE12634 |
| :103C80000401220510E120511F0B00090CE1000185 |
| :103C9000CB8F030E0401215D04E10001010ED76FFB |
| :103CA00002D00001D76B0401225166E120511F0BA5 |
| :103CB000020862E124510F0B00095EE00001CB8F86 |
| :103CC000040124BF10D024510F0BE96EEA6AD8908A |
| :103CD000E936EA36BF0EE926000EEA22EECFDEFF15 |
| :103CE000EDCFDDFF0FD024510F0BE96EEA6AD890BB |
| :103CF000E936EA36C30EE926000EEA22EECFDEFFF1 |
| :103D0000EDCFDDFF030E215D07E1DECFE9FFDDCF63 |
| :103D1000EAFF840EEF6E30D024510F0B016A700F52 |
| :103D2000006E0F0E0122020E00C0DBFF030E01C069 |
| :103D3000DBFF020EDBCFE9FF030EDBCFEAFFEF90E4 |
| :103D400024AF0DD0DECFE9FFDDCFEAFFEF6ADF74ED |
| :103D5000DECFE9FFDDCFEAFF400EEF6E0DD0DECF04 |
| :103D6000E9FFDDCFEAFF880EEF6EDF74DECFE9FFFB |
| :103D7000DDCFEAFFC80EEF6E040EE15C02E2E16AFD |
| :103D8000E552E16EE552E7CFD9FF1200800E040143 |
| :103D9000205D5BE10001C00ECB6F04012351030ADB |
| :103DA00034E0010A0EE0030A03E00001CB6B4DD0C2 |
| :103DB0000001CA0EC96F590ECA6F120ECC6FCD6BBF |
| :103DC00044D02251F66EF76AD890F636F736440E94 |
| :103DD000F6265A0EF7220900F5CFC9F00A00F5CFF2 |
| :103DE000CAF0020E0001F76AC925F66ECA51F72221 |
| :103DF0000800F5CFCCF0030EF76AC925F66ECA515C |
| :103E0000F7220800F5CFCDF020D0040E225D1AE293 |
| :103E10002251F66EF76AD890F636F736460EF62639 |
| :103E20005A0EF7220900F5CFC9F00A00F5CFCAF003 |
| :103E3000C9C0F6FFCAC0F7FF0800F5500001CC6FFB |
| :103E4000CD6B02D00001CB6B00D01200D9CFE6FFC2 |
| :103E5000E1CFD9FF020EE1260401286B296B205126 |
| :103E60001F0B020A12E0030A0DE0010A01E03BD039 |
| :103E70000001CB8F040128810001D70502E1040174 |
| :103E8000288331D00001CB8F2ED00001CB8F0401CD |
| :103E900024BF10D024510F0BE96EEA6AD890E9369E |
| :103EA000EA36BF0EE926000EEA22EECFDEFFEDCFA6 |
| :103EB000DDFF0FD024510F0BE96EEA6AD890E93686 |
| :103EC000EA36C30EE926000EEA22EECFDEFFEDCF82 |
| :103ED000DDFFDECFE9FFDDCFEAFFEF50040B02E0AC |
| :103EE000010E286F00D00001CBAF07D0280EC96F9C |
| :103EF000040ECA6FCB81020ECC6F020EE15C02E2AF |
| :103F0000E16AE552E16EE552E7CFD9FF12006D9804 |
| :103F10000001CBBF4AD0D0AF28D0020EC86FC3C0BB |
| :103F2000E9FFC4C0EAFFEE52EF6AC3C0E9FFC4C0B4 |
| :103F3000EAFFC80EEF6EBDC0E9FFBEC0EAFFEE5259 |
| :103F4000080EEF6EBDC0E9FFBEC0EAFF020EE92613 |
| :103F5000000EEA22280EEE6E040EED6EBDC0E9FFE3 |
| :103F6000BEC0EAFFC80EEF6E1FD0BDC0E9FFBEC0E5 |
| :103F7000EAFFEE52080EEF6EBDC0E9FFBEC0EAFFD9 |
| :103F8000020EE926000EEA22200EEE6E040EED6E01 |
| :103F9000BDC0E9FFBEC0EAFF8C0EEF6EC3C0E9FFF3 |
| :103FA000C4C0EAFF840EEF6E86D0D0BF84D0040177 |
| :103FB00020AF59D00001CC510401265D0001CD5144 |
| :103FC0000401275904E226C4CCF027C4CDF074D8EC |
| :103FD0000001010EC86FBDC0E9FFBEC0EAFFEE528E |
| :103FE000080EEF6EBDC0E9FFBEC0EAFF020EE92673 |
| :103FF000000EEA22200EEE6E040EED6EBDC0E9FF4B |
| :10400000BEC0EAFF800EEF6ED96BBBC0E9FFBCC03B |
| :10401000EAFFEE52080EEF6EBBC0E9FFBCC0EAFF3C |
| :10402000020EE926000EEA22200EEE6E040EED6E60 |
| :10403000BBC0E9FFBCC0EAFF840EEF6E010ED96F72 |
| :10404000C3C0E9FFC4C0EAFF020EE926000EEA225F |
| :10405000280EEE6E040EED6EC3C0E9FFC4C0EAFF89 |
| :10406000C80EEF6E28D00001020EC86FC3C0E9FF72 |
| :10407000C4C0EAFFEE52EF6AC3C0E9FFC4C0EAFF62 |
| :10408000C80EEF6EBDC0E9FFBEC0EAFFEE52080EDB |
| :10409000EF6EBDC0E9FFBEC0EAFF020EE926000ECA |
| :1040A000EA22280EEE6E040EED6EBDC0E9FFBEC022 |
| :1040B000EAFFC80EEF6E1200D9CFE6FFE1CFD9FFBD |
| :1040C000020EE1260001080ECC5D000ECD590EE275 |
| :1040D000CCC0DEFFCDC0DDFFC75103E1010EC76FCD |
| :1040E00004D0C70502E1020EC76F03D0080EDE6ED2 |
| :1040F000DD6AC3C0E9FFC4C0EAFFEF92C3C0E9FFB5 |
| :10410000C4C0EAFFEF90C3C0E9FFC4C0EAFF010EDC |
| :10411000DB50EF12C3C0E9FFC4C0EAFFEE52DFCFAD |
| :10412000EFFF000EDB50CC5F010EDB50CD5B280EA5 |
| :10413000D56F040ED66FCBB121D0D9CFE9FFDACF3E |
| :10414000EAFFEE50ED1019E0C9C0F6FFCAC0F7FF54 |
| :10415000C92B000ECA230800F550E66ED5C0E9FF52 |
| :10416000D6C0EAFFD52B000ED623E552E750EF6EFE |
| :10417000DF06010E01E2DB06E0D71FD0D9CFE9FF51 |
| :10418000DACFEAFFEE50ED1018E0C9C0E9FFCAC06F |
| :10419000EAFFC92B000ECA23EF50E66ED5C0E9FF37 |
| :1041A000D6C0EAFFD52B000ED623E552E750EF6EBE |
| :1041B000DF06010E01E2DB06E1D7020EE15C02E25E |
| :1041C000E16AE552E16EE552E7CFD9FF1200D9CF9F |
| :1041D000E6FFE1CFD9FF020EE126BBC0E9FFBCC07C |
| :1041E000EAFFEE52EFCFDFFFDFCF00F0005000011B |
| :1041F000D15D000ED25902E2D1C0DFFFDF50006E68 |
| :10420000016A0050D15DD16F0150D259D26F010EB9 |
| :10421000DB6ADF50F36E010EDBCFF4FFF350F45C8A |
| :1042200016E2010EDB50EA6A280FE96E040EEA225C |
| :10423000EF50E66ECEC0E9FFCFC0EAFFCE2B000EF6 |
| :10424000CF23E552E750EF6E010EDB2AE2D7000ED6 |
| :10425000D880D155000ED25528E2BDC0E9FFBEC0BE |
| :10426000EAFFEE52080EEF6EBDC0E9FFBEC0EAFFE6 |
| :10427000020EE926000EEA22280EEE6E040EED6E06 |
| :10428000BBC0E9FFBCC0EAFFEF50400B07E1BDC077 |
| :10429000E9FFBEC0EAFFC80EEF6E06D0BDC0E9FF61 |
| :1042A000BEC0EAFF880EEF6E25D0BDC0E9FFBEC0DC |
| :1042B000EAFFEE52080EEF6EBDC0E9FFBEC0EAFF96 |
| :1042C000020EE926000EEA22200EEE6E040EED6EBE |
| :1042D000BDC0E9FFBEC0EAFF840EEF6ED351D4111A |
| :1042E00007E005D0D4C0FAFF0001D351F96EFADF20 |
| :1042F0000001D09F020EE15C02E2E16AE552E16E4C |
| :10430000E552E7CFD9FF1200D9CFE6FFE1CFD9FFC1 |
| :10431000E6520001CB8F010EE66EE66AE66A710E88 |
| :10432000E66E0F0EE66EBBEC2DF0006E050EE15E44 |
| :104330000050DF6ADF50006E016A080E005C000E5C |
| :10434000015810E2DF50040DF3CFE9FFF4CFEAFF8C |
| :10435000000EE926040EEA22EE6AEE6AEE6AEE6AC2 |
| :10436000DF2AE8D76D8C010EE66EE66AE66ABA0EC1 |
| :10437000E66E000EE66EBBEC2DF0006E050EE15E03 |
| :1043800000506D9C0001080EC36F040EC46F000E38 |
| :10439000BB6F040EBC6FBBC0BDF0BCC0BEF022C47E |
| :1043A000B9F0B95103E1100EB86F13D0010EE66EEB |
| :1043B000E66AB90EE66E000EE66E010EE66EE66A7D |
| :1043C0004BEC2CF0006E060EE15E00500001200E5A |
| :1043D000B86FE552E552E7CFD9FF1200D9CFE6FF1B |
| :1043E000E1CFD9FF020EE126000EDE6E040EDD6E77 |
| :1043F000FD0EDB50E824026EFE0EDB50040DF35080 |
| :104400000224040DF350006E016A020E0F0B05E04A |
| :10441000D89001320032E806FBE1D8900036013630 |
| :10442000D89000360136D9CFE9FFDACFEAFF005045 |
| :10443000EE260150ED22DECFE9FFDDCFEAFFEF9E51 |
| :10444000FD0EDB500FE1FE0EEA6ADB34FE0BEA36AE |
| :10445000E96EBF0EE926000EEA22DECFEEFFDDCFC9 |
| :10446000EDFF0ED0FE0EEA6ADB34FE0BEA36E96E93 |
| :10447000C30EE926000EEA22DECFEEFFDDCFEDFF10 |
| :10448000DECFE9FFDDCFEAFFEF9CDECFE9FFDDCF36 |
| :10449000EAFF040EE926000EEA22EF8C020EE15C30 |
| :1044A00002E2E16AE552E16EE552E7CFD9FF120080 |
| :1044B000D9CFE6FFE1CFD9FF020EE126FE0EDB5099 |
| :1044C000016A700F006E0F0E012200C0DEFF01C0F6 |
| :1044D000DDFFDECFE9FFDDCFEAFFFD0EDBCFEFFF33 |
| :1044E000DBA407D0E66AFE0EDBCFE6FF77DFE552FE |
| :1044F000E552FD0EDBA208D0010EE66EFE0EDBCF0C |
| :10450000E6FF6CDFE552E552020EE15C02E2E16A91 |
| :10451000E552E16EE552E7CFD9FF1200D9CFE6FFB1 |
| :10452000E1CFD9FF020EE126FE0EDB5020E1BDC037 |
| :10453000E9FFBEC0EAFFEE52080EEF6EBDC0E9FF14 |
| :10454000BEC0EAFF020EE926000EEA22200EEE6E41 |
| :10455000040EED6EBDC0E9FFBEC0EAFF8C0EEF6E2B |
| :10456000C3C0E9FFC4C0EAFF840EEF6E3DD0FD0E6C |
| :10457000DB50E824026EFE0EDB50040DF3500224E3 |
| :10458000040DF3CF00F0F4CF01F0000E0026040E6E |
| :10459000012200C0DEFF01C0DDFF840E006EDECF11 |
| :1045A000E9FFDDCFEAFF0050EF12FD0EDB50E824FB |
| :1045B000026EFE0EDB50040DF3500224010F040DB9 |
| :1045C000F3CF00F0F4CF01F0000E0026040E01221C |
| :1045D00000C0DEFF01C0DDFF840E006EDECFE9FF0C |
| :1045E000DDCFEAFF0050EF12020EE15C02E2E16A69 |
| :1045F000E552E16EE552E7CFD9FF1200D9CFE6FFD1 |
| :10460000E1CFD9FF020EE126FD0EDB500FE0FE0EDA |
| :10461000EA6ADB34FE0BEA36E96EC30EE926000EC9 |
| :10462000EA22EECFDEFFEDCFDDFF0ED0FE0EEA6A0E |
| :10463000DB34FE0BEA36E96EBF0EE926000EEA22F5 |
| :10464000EECFDEFFEDCFDDFFD9CFE9FFDACFEAFF16 |
| :10465000EE50ED1003E1F36AF46A49D0DECFE9FFD2 |
| :10466000DDCFEAFF020EE926000EEA22FB0EDBCFC9 |
| :10467000EEFFFC0EDBCFEDFFDECFE9FFDDCFEAFF83 |
| :10468000EE52FA0EDBCFEFFF400E006EDECFE9FFF9 |
| :10469000DDCFEAFF0050EF16880E006EDECFE9FF97 |
| :1046A000DDCFEAFF0050EF12FD0EDB500CE0FE0EF6 |
| :1046B000EA6ADB34FE0BEA36E96EC30EE926000E29 |
| :1046C000EA22EF740BD0FE0EEA6ADB34FE0BEA3608 |
| :1046D000E96EBF0EE926000EEA22EF74DECF00F08D |
| :1046E000DDCF01F000C0F3FF01C0F4FF00D0020EE7 |
| :1046F000E15C02E2E16AE552E16EE552E7CFD9FF03 |
| :104700001200D9CFE6FFE1CFD9FF6DA84ED0FE0E43 |
| :10471000EA6ADB34FE0BEA36E96EC30EE926000EC8 |
| :10472000EA22EE50EFCFEAFFE96E400EEE16EE6A97 |
| :10473000EE6AEE6AFE0EEA6ADB34FE0BEA36E96EDA |
| :10474000C30EE926000EEA22EE50EFCFEAFFE96E33 |
| :10475000EE7CFE0EEA6ADB34FE0BEA36E96EC30E2F |
| :10476000E926000EEA22EF74400E006EFE0EEA6AA1 |
| :10477000DB34FE0BEA36E96EC30EE926000EEA22B0 |
| :10478000EE50EFCFEAFFE96E0050EF16FE0EEA6A38 |
| :10479000DB34FE0BEA36E96EC30EE926000EEA2290 |
| :1047A000EE50EFCFEAFFE96EEF7CE552E7CFD9FF9D |
| :0247B0001200F5 |
| :0E47B200D9CFE6FFE1CFD9FF0B0EE1260401BF |
| :1047C0002051600BE842E842E842E842E842000932 |
| :1047D00002E1C9EF28F021C402F10101025102E116 |
| :1047E000BAEF28F0410A02E16DEF28F0010A02E178 |
| :1047F00061EF28F07F0A02E153EF28F0020A02E19C |
| :1048000049EF28F0010A02E105EF28F0070A01E16B |
| :10481000D8D3010A01E1B2D3030A01E143D3190A53 |
| :1048200001E115D3370A01E108D1010A01E1E6D01F |
| :10483000030A01E1AFD0110A01E199D0060A01E1B2 |
| :104840007ED0320A58E0010A56E0030A54E0010A19 |
| :1048500052E0070A50E0010A4EE0650A2CE0010A26 |
| :104860000DE0010103690001030EC96F010ECA6F5B |
| :10487000CB81010ECC6FCB8FC9EF28F0220EDF6EFB |
| :1048800081BC02D0000EDF9A81BE02D0000EDF9202 |
| :1048900089A402D0DF8802D0000EDF98DFCF03F1B9 |
| :1048A0000001030EC96F010ECA6FCB81010ECC6FE0 |
| :1048B000CB8FC9EF28F0220EDF6E0401225103E0F6 |
| :1048C0008984DF8803D08994000EDF9881BC02D0F0 |
| :1048D000000EDF9A81BE02D0000EDF92DFCF03F11F |
| :1048E0000001030EC96F010ECA6FCB81010ECC6FA0 |
| :1048F000CB8FC9EF28F026C40BF127C40CF126C4D6 |
| :10490000D1F027C4D2F00001A60ED36F510ED46FA0 |
| :1049100001019E51090DF3CFE9FFF4CFEAFF0E0E1E |
| :10492000E926010EEA22030EE926000EEA22E9CF6B |
| :10493000CEF0EACFCFF00001D08FC9EF28F00D0EF6 |
| :10494000F36E090EF3CFDBFF81BEDB8280B0DB8824 |
| :1049500080B2DB8ADBCF03F10001030EC96F010EC9 |
| :10496000CA6FCB81010ECC6FCB8FC9EF28F0090E37 |
| :1049700022C4DBFF01010D510BE1090EDBA802D0BF |
| :10498000898001D08990DBAA02D0898201D08992E6 |
| :10499000C9EF28F0030E04012415E76E090EE7CFD6 |
| :1049A000DBFF01010D510BE1090EDBA002D0898074 |
| :1049B00001D08990DBA202D0898201D089928050F7 |
| :1049C000010BE76E090EE7CFDBFF80A202D0DB828E |
| :1049D00007D0DB92DB94DB96DB98DB9ADB9CDB9EDB |
| :1049E000DBCF03F10101046B0001030EC96F010E5F |
| :1049F000CA6FCB81020ECC6FCB8FCBD38050010B13 |
| :104A0000E76E090EE7CFDBFF80A202D0DB8207D082 |
| :104A1000DB92DB94DB96DB98DB9ADB9CDB9EDBCFC7 |
| :104A200003F10101046B0001030EC96F010ECA6F8F |
| :104A3000CB81020ECC6FCB8FACD3050E24C4DBFF31 |
| :104A4000060E25C4DBFF050EDBCF00F0060EDBCF24 |
| :104A500001F0000E005C010E01586FE2080EF36ECB |
| :104A60000A0EF3CFDBFF0001600EC96F000ECA6FA4 |
| :104A7000050EDBCF00F0060EDBCF01F0040E005C6C |
| :104A8000000E015859E2050EDBCFE9FF060EDBCF21 |
| :104A9000EAFF010ED890E936EA36E806FBE1600E3F |
| :104AA000E926000EEA2222C4EEFF23C4EDFFD9500E |
| :104AB000050FE96EDACFEAFF030EEE1801E1ED50C3 |
| :104AC00039E0050EDBCFE9FF060EDBCFEAFF010E72 |
| :104AD000D890E936EA36E806FBE1600EE926000EDA |
| :104AE000EA22EECFE6FFEFCFE6FF1CEC04F0E55242 |
| :104AF000E5522AC000F02BC001F02CC002F02DC0FE |
| :104B000003F0050EDBCFE9FF060EDBCFEAFF020E56 |
| :104B1000D890E936EA36E806FBE1700EE926000E89 |
| :104B2000EA2200C0EEFF01C0EEFF02C0EEFF03C0AC |
| :104B3000EEFF02D022C40DF17AD0100EF36E0A0EF1 |
| :104B4000F3CFDBFF00018C0EC96F000ECA6F050E9C |
| :104B5000DBCF00F0060EDBCF01F0000E005E010E91 |
| :104B6000015A070E00C0DBFF080E01C0DBFF070E75 |
| :104B7000DBCF00F0080EDBCF01F0005C000E015827 |
| :104B800056E2070EDBCFE9FF080EDBCFEAFF010E8E |
| :104B9000D890E936EA36E806FBE18C0EE926000EED |
| :104BA000EA2222C4EEFF23C4EDFFD950070FE96EBD |
| :104BB000DACFEAFF070EEE1801E1ED5038E0070EFC |
| :104BC000DBCFE9FF080EDBCFEAFF010ED890E93614 |
| :104BD000EA36E806FBE18C0EE926000EEA22EECF6B |
| :104BE000E6FFEFCFE6FF1CEC04F0E552E5522AC0E9 |
| :104BF00000F02BC001F02CC002F02DC003F0070E16 |
| :104C0000DBCFE9FF080EDBCFEAFF020ED890E936D2 |
| :104C1000EA36E806FBE19C0EE926000EEA2200C017 |
| :104C2000EEFF01C0EEFF02C0EEFF03C0EEFF050E77 |
| :104C3000DB6A060EDB6A050EDBCF00F0060EDBCF6B |
| :104C400001F0040E005C000E015870E2050EDBCF8F |
| :104C5000E9FF060EDBCFEAFF010ED890E936EA360F |
| :104C6000E806FBE1600EE926000EEA22EF50E66E50 |
| :104C7000050EDBCF00F0060EDBCF01F0010ED89061 |
| :104C800000360136E806FBE1160E0026000E012272 |
| :104C9000010E0026000E012200C0E6FF01C0E6FF63 |
| :104CA00060EC2DF0E552E552E5521DEC2EF0050EBC |
| :104CB000DBCFE9FF060EDBCFEAFF010ED890E93625 |
| :104CC000EA36E806FBE1600EE926000EEA22010E54 |
| :104CD000E926000EEA22EF50E66E050EDBCF00F06B |
| :104CE000060EDBCF01F0010ED89000360136E80643 |
| :104CF000FBE1160E0026000E0122010E0026000E1A |
| :104D00000122010E0026000E012200C0E6FF01C0B4 |
| :104D1000E6FF60EC2DF0E552E552E5521DEC2EF079 |
| :104D2000050EDB2A060E01E3DB2A85D7070EDB6AB8 |
| :104D3000080EDB6A070EDBCF00F0080EDBCF01F0B8 |
| :104D4000005C000E015870E2070EDBCFE9FF080E91 |
| :104D5000DBCFEAFF010ED890E936EA36E806FBE140 |
| :104D60008C0EE926000EEA22EF50E66E070EDBCF2E |
| :104D700000F0080EDBCF01F0010ED89000360136AE |
| :104D8000E806FBE1160E0026000E0122110E002699 |
| :104D9000000E012200C0E6FF01C0E6FF60EC2DF02E |
| :104DA000E552E552E5521DEC2EF0070EDBCFE9FF90 |
| :104DB000080EDBCFEAFF010ED890E936EA36E806A6 |
| :104DC000FBE18C0EE926000EEA22010EE926000E18 |
| :104DD000EA22EF50E66E070EDBCF00F0080EDBCFC5 |
| :104DE00001F0010ED89000360136E806FBE1160E00 |
| :104DF0000026000E0122110E0026000E0122010ED7 |
| :104E00000026000E012200C0E6FF01C0E6FF60ECB4 |
| :104E10002DF0E552E552E5521DEC2EF0070EDB2A8F |
| :104E2000080E01E3DB2A86D7550EE66E160EE66EF7 |
| :104E3000E66A60EC2DF0E552E552E5521DEC2EF0ED |
| :104E40000A0EDBCFCCF00001CB81CB8FA2D122C4E4 |
| :104E500001F116EC2EF0C580C5B0FED716EC2EF091 |
| :104E600001010151E824E66E27EC2DF0E55223C440 |
| :104E7000E6FF27EC2DF0E55224C4E6FF27EC2DF0E9 |
| :104E8000E552C584C5B4FED716EC2EF00101036BC4 |
| :104E90000001030EC96F010ECA6FCB81010ECC6FEA |
| :104EA000CB8F77D1050EDB6A060EDB6A050EDBCFF2 |
| :104EB00000F0060EDBCF01F0040E005C000E01587E |
| :104EC0001FE2050EDBCFE9FF060EDBCFEAFFDA0EAD |
| :104ED000E926010EEA22EF50E66E050EDBCFE9FF70 |
| :104EE000060EDBCFEAFF030EE926010EEA22E552A9 |
| :104EF000E750EF6E050EDB2A060E01E3DB2AD6D75C |
| :104F0000050EDB6A060EDB6A050EDBCF00F0060E2F |
| :104F1000DBCF01F0040E005C000E015825E2050E07 |
| :104F2000DBCFE9FF060EDBCFEAFFD60EE926010E46 |
| :104F3000EA22EF50E66E040EE76E050EDBCFE9FFC6 |
| :104F4000060EDBCFEAFFE750E926000EEA22030E49 |
| :104F5000E926010EEA22E552E750EF6E050EDB2A44 |
| :104F6000060E01E3DB2AD0D70001030EC96F010E44 |
| :104F7000CA6FCB81080ECC6FCB8F0BD1306A316AF0 |
| :104F8000326A4A0E336ED2C12BF0D3C12CF0D4C199 |
| :104F90002DF0D5C12EF02EEC2AF0E8EC2AF02AC034 |
| :104FA000A1F12BC0A2F12CC0A3F12DC0A4F10001EE |
| :104FB000A10EC96F010ECA6FCB81040ECC6FCB8FCF |
| :104FC000E8D0306A240E316E740E326E490E336EA4 |
| :104FD000CEC12BF0CFC12CF0D0C12DF0D1C12EF01D |
| :104FE0002EEC2AF0B9EC2AF0030E2CC0DBFF040EE5 |
| :104FF0002DC0DBFF0001D950030FC96FDACFCAF013 |
| :10500000CB81020ECC6FCB8FC4D0050EDB6A060EAF |
| :10501000DB6A050EDBCF00F0060EDBCF01F0040EDD |
| :10502000005C000E01582BE2050EE76EDBCF00F0AE |
| :10503000060EDBCF01F0E7500026000E0122010E24 |
| :105040000026000E012200C0E6FF01C0E6FF85EC4D |
| :105050002DF0E552E552E66E050EDBCFE9FF060EB8 |
| :10506000DBCFEAFFA10EE926010EEA22E552E75066 |
| :10507000EF6E050EDB2A060E01E3DB2ACAD700011C |
| :10508000A10EC96F010ECA6FCB81040ECC6FCB8FFE |
| :1050900080D00001A50EC96F010ECA6FCB81040E2E |
| :1050A000CC6FCB8F76D022C401F1E7EC0AF000017F |
| :1050B000AB0EC96F010ECA6FCB81060ECC6FCB8FC2 |
| :1050C00068D00101036B0001030EC96F010ECA6FA6 |
| :1050D000CB81010ECC6FCB8F5CD0FF0E0401225D23 |
| :1050E0003BE1E668000EE66EE66A60EC2DF0E55204 |
| :1050F000E552E5521DEC2EF0E668050EE66EE66A16 |
| :1051000060EC2DF0E552E552E5521DEC2EF0E6681C |
| :105110000A0EE66EE66A60EC2DF0E552E552E552C5 |
| :105120001DEC2EF0E6680D0EE66EE66A60EC2DF0E2 |
| :10513000E552E552E5521DEC2EF0E668160EE66EDD |
| :10514000E66A60EC2DF0E552E552E5521DEC2EF0DA |
| :105150000101550E016F02D022C401F10101036B60 |
| :105160000001030EC96F010ECA6FCB81010ECC6F17 |
| :10517000CB8F0FD00101040E036F100E046F0001DE |
| :10518000030EC96F010ECA6FCB81020ECC6FCB8F9D |
| :1051900000D00B0EE15C02E2E16AE552E16EE552FD |
| :1051A000E7CFD9FF1200100E0101A05D08E3010155 |
| :1051B0009F2B100E9F5D01E39F6B0101A007010172 |
| :1051C0009E51090DF3CFE9FFF4CFEAFF0E0EE92659 |
| :1051D000010EEA2202C1EFFF9E51090DF3CFE9FF54 |
| :1051E000F4CFEAFF0E0EE926010EEA22EE520BC1C1 |
| :1051F000EEFF0CC1EDFF9E2B100E9E5D01E39E6B3A |
| :065200000101A02B1200C9 |
| :0A520600259E05D0259E2DAE02D096 |
| :105210002D6C258E2DC027F0266A376A366A860ED9 |
| :10522000286E296AA2EF2BF0259E08D0259E2DAE70 |
| :1052300005D02C6C2D1EE86A2D22258E2DC027F05E |
| :105240002CC026F0376A366A8E0E286E296AA2EFC5 |
| :105250002BF0259E0CD0259E2DAE09D02A6C2B1E3E |
| :105260002C1E2D1EE86A2B222C222D22258E2DC0CD |
| :1052700027F02CC026F02BC037F02AC036F09E0E47 |
| :10528000286E296AA2EF2BF0337E256ADEEC2BF024 |
| :10529000F6EC2BF025B686EF2BF025A20AD025AA36 |
| :1052A00003D025BE86EF2BF025A492EF2BF08FEFD5 |
| :1052B0002BF025AA05D025AC92EF2BF08FEF2BF029 |
| :1052C00025A00AD025A808D025BE04D025A402D048 |
| :1052D0009BEF2BF09FEF2BF0366A296A33502E5C40 |
| :1052E000356E10E32BC037F02CC026F02DC027F010 |
| :1052F0002EC034F030C02BF031C02CF032C02DF075 |
| :10530000253A09D030C037F031C026F032C027F03E |
| :1053100033C034F0356C259E25BC258E34C028F072 |
| :1053200025B0CEEF2BF01A0E3560CEEF2BF0286AA9 |
| :105330002E6A25A408D02B6C2C1E2D1E2E1EE86A6A |
| :105340002C222D222E2225AC08D0376C261E271E9B |
| :10535000281EE86A2622272228222A6A355207E0D8 |
| :105360002E342D322C322B322A32352EF9D72B50B7 |
| :1053700037262C5026222D5027222E5028222AC094 |
| :1053800036F0259E28AE0BD0366C371E261E271E03 |
| :10539000281EE86A3722262227222822258E28A0C6 |
| :1053A00006D0D8802732263237323632342A34C0FB |
| :1053B00028F0A2EF2BF0256ADEEC2BF0F6EC2BF0B8 |
| :1053C00025B686EF2BF025A205D025BA86EF2BF067 |
| :1053D0008DEF2BF025BA99EF2BF025A005D025B83D |
| :1053E00086EF2BF099EF2BF025B88DEF2BF0296A83 |
| :1053F0007F0E2E24286EE86A29223350285EE86A40 |
| :10540000295A1A0E346E2E6A366A376A266A276A55 |
| :1054100030502B5E31502C5A32502D5A000E2E5ADD |
| :1054200009E730502B2631502C2232502D22000E0D |
| :105430002E2201D0368AD8902B362C362D362E3699 |
| :10544000D8903636373626362736342EE1D72D50CB |
| :105450002C102B10D8A4368AA2EF2BF0256ADEEC94 |
| :105460002BF0F6EC2BF025B686EF2BF025A205D01D |
| :1054700025B886EF2BF08DEF2BF025AA05D025B0AF |
| :1054800086EF2BF08DEF2BF025B002D025A802D0AF |
| :1054900099EF2BF0296A33502E24286EE86A2922CE |
| :1054A0007E0E285EE86A295A366A376A266A276AB3 |
| :1054B00032502D02F4CF27F0F3CF26F031502D02D9 |
| :1054C000F3503726F4502622000E272232502C02A9 |
| :1054D000F3503726F4502622000E272230502D029A |
| :1054E000F3503626F4503722000E26222722315060 |
| :1054F0002C02F3503626F4503722000E26222722A3 |
| :1055000032502B02F3503626F4503722000E26225A |
| :10551000272230502C02F4503626000E3722262245 |
| :10552000272231502B02F4503626000E3722262235 |
| :105530002722A2EF2BF02CC036F02C503102F4CFF2 |
| :105540002BF0F3CF2AF02D503202F4CF2DF0F3CF11 |
| :105550002CF03102F3502B26F4502C22E86A2D2235 |
| :1055600036503202F3502B26F4502C22E86A2D22BA |
| :10557000000C256ADEEC2BF025B6C3EF2AF025A23D |
| :105580000ED025B405D07F0E2D6EFF0E2C6E1FD0D1 |
| :10559000800E2D6E2C6A1BD02D6A2C6A18D025B077 |
| :1055A000FBD78F0E2E60EDD77E0E2E64F5D78E0EB4 |
| :1055B0002E5C05E0D8902D322C322E2AF8D725A467 |
| :1055C00006D02C6C2D1EE86A2D222DAEE5D71200D8 |
| :1055D000256ADEEC2BF025B6F2EF2AF025A20FD0DB |
| :1055E00025B407D07F0E2D6EFF0E2C6E2B6E2A6E0B |
| :1055F00025D0800E2D6E01D02D6A000EF6D725B075 |
| :10560000FBD72A6A9F0E2E60EBD77E0E2E64F4D74E |
| :105610009E0E2E5C07E0D8902D322C322B322A328F |
| :105620002E2AF6D725A40AD02A6C2B1E2C1E2D1E3E |
| :10563000E86A2B222C222D222DAEDED7120031EC6F |
| :105640002BF025B6000C25B0000C25B4000C010C85 |
| :1056500031EC2BF025B6000C25B0000C25A4000C75 |
| :10566000010C256ADEEC2BF0F6EC2BF025B61200CF |
| :1056700025AE08D025A004D025A802D02580120090 |
| :105680002590120033502E5C0BE132502D5C08E166 |
| :1056900031502C5C05E130502B5C02E1258012007A |
| :1056A000D8A002D0258E10D02E5033C02EF0336EED |
| :1056B0002D5032C02DF0326E2C5031C02CF0316E96 |
| :1056C0002B5030C02BF0306E33502E5C10E0FF0FAB |
| :1056D00009E0259025B403D025AE2584120025AE1F |
| :1056E00025941200332AD890323231323032305081 |
| :1056F0002B5E31502C5A32502D5A2DBEEAD7D890FD |
| :105700002B362C362D362E2EF8D7C8D77F0E2E6E80 |
| :10571000FF0E2D6E2C6E2B6E12007F0E25BEFF0E1F |
| :105720002E6E02D07F0E2E6E800E2D6E2C6A2B6A8E |
| :10573000F3D725AE04D0800E2E6E2D6AF7D72E6AD1 |
| :105740002D6AF4D72750261037103610F8E029BEFE |
| :10575000F0D727BE0CD028502910EBE0D890363671 |
| :105760003736263627362806D8A02906F2D72950FC |
| :10577000D4E12828D2E036AE11D07F0E361402E1F3 |
| :1057800037A00CD0372AE86A2622272207E3D880E0 |
| :10579000273226323732282A2828BFE02850C9E08D |
| :1057A00037C02BF026C02CF027342D6E28302E6EFB |
| :1057B0002D322E9E25BE2E8E8CEF2BF02D362E36C2 |
| :1057C00002E32584257E06E125802E6A2D6A2C6A57 |
| :1057D0002B6A12002E2803E0D8802D321200D890B8 |
| :1057E0002D3202E125821200258612003236333630 |
| :1057F00002E3258C257E06E12588336A326A316A08 |
| :10580000306A1200332803E0D88032321200D89078 |
| :085810003232EAE1258A1200A0 |
| :08581800DACFE4FFE2CFDAFF72 |
| :10582000E652E552E5CFDAFF1100D8CFE4FFE0CF32 |
| :10583000E4FFE46EDACFE4FFE2CFDAFFE652E552AE |
| :10584000E5CFDAFFE550E5CFE0FFE5CFD8FF100068 |
| :1058500006D8A4EC1BF004EC0AF0FBD712000F0EE4 |
| :10586000C1125CEC05F038EF1BF0120012001200C0 |
| :105870001200D9EF23F0120012006D840101080E0E |
| :10588000EE6F070EEF6FEE07000EEF5BEE51EF11BC |
| :10589000FAE16D941200D9CFE6FFE1CFD9FFFD0EFA |
| :1058A000DBCF2CF0FE0EDBCF2DF0720E2C1801E1B9 |
| :1058B0002D5033E0E8682C1802E17F0E2D182BE004 |
| :1058C000740E2C1801E12D5024E0750E2C1801E106 |
| :1058D0002D501DE0730E2C1801E12D5016E0030E23 |
| :1058E0002C1801E12D500FE0020E2C1801E12D5073 |
| :1058F00008E0010E2C1801E12D5001E010D0BCDFB2 |
| :105900000FD0B9DF0DD0B5DF0BD0B1DF09D0ADDFDF |
| :1059100007D0ACDF05D0ACDF03D0000001D000D051 |
| :0C592000010E00D0E552E7CFD9FF1200C5 |
| :04592C002A0EF66EDB |
| :10593000080EF76E000EF86E01010900F550E46FD5 |
| :105940000900F550E56F03E1E46701D03DD009009F |
| :10595000F550DF6F0900F550E06F0900F550E16F79 |
| :1059600009000900F550E96E0900F550EA6E0900DA |
| :1059700009000900F550E26F0900F550E36F0900D6 |
| :105980000900F6CFE6F1F7CFE7F1F8CFE8F1DFC194 |
| :10599000F6FFE0C1F7FFE1C1F8FF0101E25302E1C8 |
| :1059A000E35307E00900F550EE6EE207F8E2E30783 |
| :1059B000F9D7E6C1F6FFE7C1F7FFE8C1F8FF01013B |
| :0A59C000E407000EE55BBFD71200FC |
| :0659CA00120100020000C2 |
| :1059D0000008C016DC0500000102030109022000D6 |
| :1059E000010100C0320904000002000000000705A8 |
| :1059F000010240000107058102400001040309047F |
| :105A00001A037700770077002E006F0062006400B1 |
| :105A1000650076002E006100740016034400470004 |
| :105A200038005300410051002D004900320043006E |
| :105A300014035400460033004C004A002D0031008E |
| :0E5A40002E003000DC59FC59005A1A5A305A18 |
| :025A4E00D9CFAE |
| :105A5000E6FFDACFE6FFE1CFD9FFE2CFDAFFFD0EB6 |
| :105A6000DB50C96EC6AE02D0FF0E24D00F0EC61496 |
| :105A700008080FE00F0EC6140B080BE0C6889EA6A0 |
| :105A8000FED7C750040B03E1C750010B10E0000E16 |
| :105A900011D00F0EC614080804E00F0EC6140B0830 |
| :105AA00009E1C7B0FED716EC2EF0C5AC02D0FE0E51 |
| :105AB00001D0000EE552E5CFDAFFE7CFD9FF1200A3 |
| :105AC000D9CFE6FFDACFE6FFE1CFD9FFE2CFDAFFA9 |
| :105AD000FF0EE76EFC0EDBCF00F0E7500016005023 |
| :105AE000A96EFB0EDB50A86EA69EA69CA684F29E15 |
| :105AF000550EA76EAA0EA76EA682F28EA694E55248 |
| :0A5B0000E5CFDAFFE7CFD9FF12006E |
| :065B0A00D9CFE6FFDACF5F |
| :105B1000E6FFE1CFD9FFE2CFDAFFFF0EE76EFC0E22 |
| :105B2000DBCF00F0E75000160050A96EA69CA69EA1 |
| :105B3000A680A850E552E5CFDAFFE7CFD9FF1200E3 |
| :105B4000D9CFE6FFDACFE6FFE1CFD9FFE2CFDAFF28 |
| :105B50003F0EC716C66AC56AFD0EDB50C612FC0EA4 |
| :105B6000DB50C71293829380C68AE552E5CFDAFFF5 |
| :065B7000E7CFD9FF12008F |
| :0A5B7600FE0EE3CFE9FFFF0EE3CFC0 |
| :105B8000EAFFE9CFF3FFEACFF4FFFB0EE35003E1B6 |
| :105B9000FC0EE35009E0FB0EE30602E2FC0EE30616 |
| :0A5BA000FD0EE350EE6EF1D7120087 |
| :065BAA00296A286A100EB2 |
| :105BB000E76ED8902C362D36283629363150285CA1 |
| :105BC0003250295805E33150285E3250295A2C2A88 |
| :065BD000E72EF0D71200E1 |
| :0A5BD600000EF36E00EE00F0040E66 |
| :105BE00001D81200EA6002D0EE6AFCD7F350E960F7 |
| :065BF0001200EE6AFCD772 |
| :0A5BF60013EE00F023EE00F0F86A51 |
| :105C0000259C96EC2CF020EC2EF028EC2CF0FBD709 |
| :025C1000120080 |
| :0E5C12000F0EC614080804E00F0EC6140B088F |
| :0C5C200001E1C586C7A0FED7C9501200E4 |
| :045C2C001F0EC5146E |
| :0A5C3000FDE1C750040BFAE1120079 |
| :065C3A00A6B2FED7120025 |
| :025C4000120050 |
| :055C420000000100005C |
| :020000040030CA |
| :0100000024DB |
| :010001000EF0 |
| :010002003FBE |
| :010003001EDE |
| :010005008179 |
| :010006008178 |
| :010008000FE8 |
| :01000900C036 |
| :01000A000FE6 |
| :01000B00A054 |
| :01000C000FE4 |
| :01000D0040B2 |
| :0200000400F00A |
| :10000000FF00000000FF00000000FF0000FF0000F4 |
| :10001000000000000000FF000000000000000000E1 |
| :1000200000000000000000000000000000000000D0 |
| :080030000000000000000001C7 |
| :00000001FF |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/USB Device - MCHPUSB - Generic Driver - C18 - PIC18F4550.mcp |
|---|
| 0,0 → 1,130 |
| [HEADER] |
| magic_cookie={66E99B07-E706-4689-9E80-9B2582898A13} |
| file_version=1.0 |
| device=PIC18F4550 |
| [PATH_INFO] |
| BuildDirPolicy=BuildDirIsProjectDir |
| dir_src= |
| dir_bin= |
| dir_tmp=.\Objects\USB Device - Generic Driver Demo - C18 - PICDEM FSUSB |
| dir_sin= |
| dir_inc=C:\library\Microchip\Include\USB;C:\library\Microchip\USB;C:\library\Microchip\Include;. |
| dir_lib=C:\Program Files\Microchip\MCC18\lib |
| dir_lkr= |
| [CAT_FILTERS] |
| filter_src=*.asm;*.c |
| filter_inc=*.h;*.inc |
| filter_obj=*.o |
| filter_lib=*.lib |
| filter_lkr=*.lkr |
| [CAT_SUBFOLDERS] |
| subfolder_src=USB Stack |
| subfolder_inc=Common;USB Stack |
| subfolder_obj= |
| subfolder_lib= |
| subfolder_lkr= |
| [FILE_SUBFOLDERS] |
| file_000=. |
| file_001=. |
| file_002=. |
| file_003=. |
| file_004=USB Stack |
| file_005=USB Stack |
| file_006=USB Stack |
| file_007=. |
| file_008=. |
| file_009=. |
| file_010=Common |
| file_011=Common |
| file_012=USB Stack |
| file_013=USB Stack |
| file_014=USB Stack |
| file_015=USB Stack |
| file_016=USB Stack |
| file_017=USB Stack |
| file_018=USB Stack |
| file_019=. |
| file_020=. |
| [GENERATED_FILES] |
| file_000=no |
| file_001=no |
| file_002=no |
| file_003=no |
| file_004=no |
| file_005=no |
| file_006=no |
| file_007=no |
| file_008=no |
| file_009=no |
| file_010=no |
| file_011=no |
| file_012=no |
| file_013=no |
| file_014=no |
| file_015=no |
| file_016=no |
| file_017=no |
| file_018=no |
| file_019=no |
| file_020=no |
| [OTHER_FILES] |
| file_000=no |
| file_001=no |
| file_002=no |
| file_003=no |
| file_004=no |
| file_005=no |
| file_006=no |
| file_007=no |
| file_008=no |
| file_009=no |
| file_010=no |
| file_011=no |
| file_012=no |
| file_013=no |
| file_014=no |
| file_015=no |
| file_016=no |
| file_017=no |
| file_018=no |
| file_019=no |
| file_020=no |
| [FILE_INFO] |
| file_000=user.c |
| file_001=main.c |
| file_002=usb_descriptors.c |
| file_003=UBW-I2C.c |
| file_004=C:\library\Microchip\USB\usb_device.c |
| file_005=C:\library\Microchip\Include\USB\usb_device.h |
| file_006=C:\library\Microchip\Include\USB\usb_function_generic.h |
| file_007=HardwareProfile.h |
| file_008=user.h |
| file_009=usb_config.h |
| file_010=C:\library\Microchip\Include\GenericTypeDefs.h |
| file_011=C:\library\Microchip\Include\Compiler.h |
| file_012=C:\library\Microchip\Include\USB\usb_hal_pic18.h |
| file_013=C:\library\Microchip\Include\USB\usb.h |
| file_014=C:\library\Microchip\Include\USB\usb_ch9.h |
| file_015=C:\library\Microchip\Include\USB\usb_common.h |
| file_016=C:\library\Microchip\Include\USB\usb_device.h |
| file_017=C:\library\Microchip\Include\USB\usb_function_generic.h |
| file_018=C:\library\Microchip\Include\USB\usb_hal.h |
| file_019=HardwareProfile - PICDEM FSUSB.h |
| file_020=rm18f4550.lkr |
| [SUITE_INFO] |
| suite_guid={5B7D72DD-9861-47BD-9F60-2BE967BF8416} |
| suite_state= |
| [TOOL_SETTINGS] |
| TS{DD2213A8-6310-47B1-8376-9430CDFC013F}= |
| TS{BFD27FBA-4A02-4C0E-A5E5-B812F3E7707C}=/m"$(BINDIR_)$(TARGETBASE).map" /w /o"$(TARGETBASE).cof" |
| TS{C2AF05E7-1416-4625-923D-E114DB6E2B96}=-Ou- -Ot- -Ob- -Op- -Or- -Od- -Opa- |
| TS{ADE93A55-C7C7-4D4D-A4BA-59305F7D0391}= |
| [INSTRUMENTED_TRACE] |
| enable=0 |
| transport=0 |
| format=0 |
| [CUSTOM_BUILD] |
| Pre-Build= |
| Pre-BuildEnabled=1 |
| Post-Build= |
| Post-BuildEnabled=1 |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/USB Device - MCHPUSB - Generic Driver - C18 - PIC18F4550.mcw |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/main.c |
|---|
| 0,0 → 1,1020 |
| /******************************************************************** |
| FileName: main.c |
| Dependencies: See INCLUDES section |
| Processor: PIC18 or PIC24 USB Microcontrollers |
| Hardware: The code is natively intended to be used on the following |
| hardware platforms: PICDEM FS USB Demo Board, |
| PIC18F87J50 FS USB Plug-In Module, or |
| Explorer 16 + PIC24 USB PIM. The firmware may be |
| modified for use on other USB platforms by editing the |
| HardwareProfile.h file. |
| Complier: Microchip C18 (for PIC18) or C30 (for PIC24) |
| Company: Microchip Technology, Inc. |
| Software License Agreement: |
| The software supplied herewith by Microchip Technology Incorporated |
| (the Company) for its PIC® Microcontroller is intended and |
| supplied to you, the Companys customer, for use solely and |
| exclusively on Microchip PIC Microcontroller products. The |
| software is owned by the Company and/or its supplier, and is |
| protected under applicable copyright laws. All rights are reserved. |
| Any use in violation of the foregoing restrictions may subject the |
| user to criminal sanctions under applicable laws, as well as to |
| civil liability for the breach of the terms and conditions of this |
| license. |
| THIS SOFTWARE IS PROVIDED IN AN AS IS CONDITION. NO WARRANTIES, |
| WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED |
| TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, |
| IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR |
| CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. |
| ******************************************************************** |
| File Description: |
| Change History: |
| Rev Date Description |
| 1.0 11/19/2004 Initial release |
| 2.1 02/26/2007 Updated for simplicity and to use common |
| coding style |
| ********************************************************************/ |
| /** INCLUDES *******************************************************/ |
| #include "USB/usb.h" |
| #include "USB/usb_function_generic.h" |
| #include "user.h" // Modifiable |
| #include "HardwareProfile.h" |
| /** CONFIGURATION **************************************************/ |
| #if defined(PICDEM_FS_USB) // Configuration bits for PICDEM FS USB Demo Board (based on PIC18F4550) |
| #pragma config PLLDIV = 5 // (20 MHz crystal on PICDEM FS USB board) |
| #pragma config CPUDIV = OSC1_PLL2 |
| #pragma config USBDIV = 2 // Clock source from 96MHz PLL/2 |
| #pragma config FOSC = HSPLL_HS |
| #pragma config FCMEN = OFF |
| #pragma config IESO = OFF |
| #pragma config PWRT = OFF |
| #pragma config BOR = ON |
| #pragma config BORV = 3 |
| #pragma config VREGEN = ON //USB Voltage Regulator |
| #pragma config WDT = OFF |
| #pragma config WDTPS = 32768 |
| #pragma config MCLRE = ON |
| #pragma config LPT1OSC = OFF |
| #pragma config PBADEN = OFF |
| // #pragma config CCP2MX = ON |
| #pragma config STVREN = ON |
| #pragma config LVP = OFF |
| // #pragma config ICPRT = OFF // Dedicated In-Circuit Debug/Programming |
| #pragma config XINST = OFF // Extended Instruction Set |
| #pragma config CP0 = OFF |
| #pragma config CP1 = OFF |
| // #pragma config CP2 = OFF |
| // #pragma config CP3 = OFF |
| #pragma config CPB = OFF |
| // #pragma config CPD = OFF |
| #pragma config WRT0 = OFF |
| #pragma config WRT1 = OFF |
| // #pragma config WRT2 = OFF |
| // #pragma config WRT3 = OFF |
| #pragma config WRTB = OFF // Boot Block Write Protection |
| #pragma config WRTC = OFF |
| // #pragma config WRTD = OFF |
| #pragma config EBTR0 = OFF |
| #pragma config EBTR1 = OFF |
| // #pragma config EBTR2 = OFF |
| // #pragma config EBTR3 = OFF |
| #pragma config EBTRB = OFF |
| #elif defined(PIC18F87J50_PIM) // Configuration bits for PIC18F87J50 FS USB Plug-In Module board |
| #pragma config XINST = OFF // Extended instruction set |
| #pragma config STVREN = ON // Stack overflow reset |
| #pragma config PLLDIV = 3 // (12 MHz crystal used on this board) |
| #pragma config WDTEN = OFF // Watch Dog Timer (WDT) |
| #pragma config CP0 = OFF // Code protect |
| #pragma config CPUDIV = OSC1 // OSC1 = divide by 1 mode |
| #pragma config IESO = OFF // Internal External (clock) Switchover |
| #pragma config FCMEN = OFF // Fail Safe Clock Monitor |
| #pragma config FOSC = HSPLL // Firmware must also set OSCTUNE<PLLEN> to start PLL! |
| #pragma config WDTPS = 32768 |
| // #pragma config WAIT = OFF // Commented choices are |
| // #pragma config BW = 16 // only available on the |
| // #pragma config MODE = MM // 80 pin devices in the |
| // #pragma config EASHFT = OFF // family. |
| #pragma config MSSPMSK = MSK5 |
| // #pragma config PMPMX = DEFAULT |
| // #pragma config ECCPMX = DEFAULT |
| #pragma config CCP2MX = DEFAULT |
| #elif defined(PIC18F46J50_PIM) || defined(PIC18F_STARTER_KIT_1) |
| #pragma config WDTEN = OFF //WDT disabled (enabled by SWDTEN bit) |
| #pragma config PLLDIV = 3 //Divide by 3 (12 MHz oscillator input) |
| #pragma config STVREN = ON //stack overflow/underflow reset enabled |
| #pragma config XINST = OFF //Extended instruction set disabled |
| #pragma config CPUDIV = OSC1 //No CPU system clock divide |
| #pragma config CP0 = OFF //Program memory is not code-protected |
| #pragma config OSC = HSPLL //HS oscillator, PLL enabled, HSPLL used by USB |
| #pragma config T1DIG = ON //Sec Osc clock source may be selected |
| #pragma config LPT1OSC = OFF //high power Timer1 mode |
| #pragma config FCMEN = OFF //Fail-Safe Clock Monitor disabled |
| #pragma config IESO = OFF //Two-Speed Start-up disabled |
| #pragma config WDTPS = 32768 //1:32768 |
| #pragma config DSWDTOSC = INTOSCREF //DSWDT uses INTOSC/INTRC as clock |
| #pragma config RTCOSC = T1OSCREF //RTCC uses T1OSC/T1CKI as clock |
| #pragma config DSBOREN = OFF //Zero-Power BOR disabled in Deep Sleep |
| #pragma config DSWDTEN = OFF //Disabled |
| #pragma config DSWDTPS = 8192 //1:8,192 (8.5 seconds) |
| #pragma config IOL1WAY = OFF //IOLOCK bit can be set and cleared |
| #pragma config MSSP7B_EN = MSK7 //7 Bit address masking |
| #pragma config WPFP = PAGE_1 //Write Protect Program Flash Page 0 |
| #pragma config WPEND = PAGE_0 //Start protection at page 0 |
| #pragma config WPCFG = OFF //Write/Erase last page protect Disabled |
| #pragma config WPDIS = OFF //WPFP[5:0], WPEND, and WPCFG bits ignored |
| #elif defined(LOW_PIN_COUNT_USB_DEVELOPMENT_KIT) |
| // PIC18F14K50 |
| #pragma config CPUDIV = NOCLKDIV |
| #pragma config USBDIV = OFF |
| #pragma config FOSC = HS |
| #pragma config PLLEN = ON |
| #pragma config FCMEN = OFF |
| #pragma config IESO = OFF |
| #pragma config PWRTEN = OFF |
| #pragma config BOREN = OFF |
| #pragma config BORV = 30 |
| #pragma config WDTEN = OFF |
| #pragma config WDTPS = 32768 |
| #pragma config MCLRE = OFF |
| #pragma config HFOFST = OFF |
| #pragma config STVREN = ON |
| #pragma config LVP = OFF |
| #pragma config XINST = OFF |
| #pragma config BBSIZ = OFF |
| #pragma config CP0 = OFF |
| #pragma config CP1 = OFF |
| #pragma config CPB = OFF |
| #pragma config WRT0 = OFF |
| #pragma config WRT1 = OFF |
| #pragma config WRTB = OFF |
| #pragma config WRTC = OFF |
| #pragma config EBTR0 = OFF |
| #pragma config EBTR1 = OFF |
| #pragma config EBTRB = OFF |
| #elif defined(EXPLORER_16) |
| #ifdef __PIC24FJ256GB110__ //Defined by MPLAB when using 24FJ256GB110 device |
| _CONFIG1( JTAGEN_OFF & GCP_OFF & GWRP_OFF & COE_OFF & FWDTEN_OFF & ICS_PGx2) |
| _CONFIG2( 0xF7FF & IESO_OFF & FCKSM_CSDCMD & OSCIOFNC_ON & POSCMOD_HS & FNOSC_PRIPLL & PLLDIV_DIV2 & IOL1WAY_ON) |
| #elif defined(__PIC24FJ64GB004__) |
| _CONFIG1(WDTPS_PS1 & FWPSA_PR32 & WINDIS_OFF & FWDTEN_OFF & ICS_PGx1 & GWRP_OFF & GCP_OFF & JTAGEN_OFF) |
| _CONFIG2(POSCMOD_HS & I2C1SEL_PRI & IOL1WAY_OFF & OSCIOFNC_ON & FCKSM_CSDCMD & FNOSC_PRIPLL & PLL96MHZ_ON & PLLDIV_DIV2 & IESO_ON) |
| _CONFIG3(WPFP_WPFP0 & SOSCSEL_SOSC & WUTSEL_LEG & WPDIS_WPDIS & WPCFG_WPCFGDIS & WPEND_WPENDMEM) |
| _CONFIG4(DSWDTPS_DSWDTPS3 & DSWDTOSC_LPRC & RTCOSC_SOSC & DSBOREN_OFF & DSWDTEN_OFF) |
| #elif defined(__32MX460F512L__) || defined(__32MX795F512L__) |
| #pragma config UPLLEN = ON // USB PLL Enabled |
| #pragma config FPLLMUL = MUL_15 // PLL Multiplier |
| #pragma config UPLLIDIV = DIV_2 // USB PLL Input Divider |
| #pragma config FPLLIDIV = DIV_2 // PLL Input Divider |
| #pragma config FPLLODIV = DIV_1 // PLL Output Divider |
| #pragma config FPBDIV = DIV_1 // Peripheral Clock divisor |
| #pragma config FWDTEN = OFF // Watchdog Timer |
| #pragma config WDTPS = PS1 // Watchdog Timer Postscale |
| #pragma config FCKSM = CSDCMD // Clock Switching & Fail Safe Clock Monitor |
| #pragma config OSCIOFNC = OFF // CLKO Enable |
| #pragma config POSCMOD = HS // Primary Oscillator |
| #pragma config IESO = OFF // Internal/External Switch-over |
| #pragma config FSOSCEN = OFF // Secondary Oscillator Enable (KLO was off) |
| #pragma config FNOSC = PRIPLL // Oscillator Selection |
| #pragma config CP = OFF // Code Protect |
| #pragma config BWP = OFF // Boot Flash Write Protect |
| #pragma config PWP = OFF // Program Flash Write Protect |
| #pragma config ICESEL = ICS_PGx2 // ICE/ICD Comm Channel Select |
| #pragma config DEBUG = ON // Background Debugger Enable |
| #else |
| #error No hardware board defined, see "HardwareProfile.h" and __FILE__ |
| #endif |
| #elif defined(PIC24F_STARTER_KIT) |
| _CONFIG1( JTAGEN_OFF & GCP_OFF & GWRP_OFF & COE_OFF & FWDTEN_OFF & ICS_PGx2) |
| _CONFIG2( 0xF7FF & IESO_OFF & FCKSM_CSDCMD & OSCIOFNC_ON & POSCMOD_HS & FNOSC_PRIPLL & PLLDIV_DIV3 & IOL1WAY_ON) |
| #elif defined(PIC24FJ256DA210_DEV_BOARD) |
| //_CONFIG1(FWDTEN_OFF & ICS_PGx2 & COE_OFF & GWRP_OFF & GCP_OFF & JTAGEN_OFF) |
| //_CONFIG2(POSCMOD_HS & IOL1WAY_ON & OSCIOFNC_ON & FCKSM_CSDCMD & FNOSC_PRIPLL & PLL96MHZ_ON & PLLDIV_DIV2 & IESO_OFF) |
| #elif defined(PIC32_USB_STARTER_KIT) |
| #pragma config UPLLEN = ON // USB PLL Enabled |
| #pragma config FPLLMUL = MUL_15 // PLL Multiplier |
| #pragma config UPLLIDIV = DIV_2 // USB PLL Input Divider |
| #pragma config FPLLIDIV = DIV_2 // PLL Input Divider |
| #pragma config FPLLODIV = DIV_1 // PLL Output Divider |
| #pragma config FPBDIV = DIV_1 // Peripheral Clock divisor |
| #pragma config FWDTEN = OFF // Watchdog Timer |
| #pragma config WDTPS = PS1 // Watchdog Timer Postscale |
| #pragma config FCKSM = CSDCMD // Clock Switching & Fail Safe Clock Monitor |
| #pragma config OSCIOFNC = OFF // CLKO Enable |
| #pragma config POSCMOD = HS // Primary Oscillator |
| #pragma config IESO = OFF // Internal/External Switch-over |
| #pragma config FSOSCEN = OFF // Secondary Oscillator Enable (KLO was off) |
| #pragma config FNOSC = PRIPLL // Oscillator Selection |
| #pragma config CP = OFF // Code Protect |
| #pragma config BWP = OFF // Boot Flash Write Protect |
| #pragma config PWP = OFF // Program Flash Write Protect |
| #pragma config ICESEL = ICS_PGx2 // ICE/ICD Comm Channel Select |
| #pragma config DEBUG = ON // Background Debugger Enable |
| #elif defined(UBW) |
| #pragma config PLLDIV = 5 // (20 MHz input) |
| #pragma config CPUDIV = OSC1_PLL2 |
| #pragma config USBDIV = 2 // Clock source from 96MHz PLL/2 |
| #pragma config FOSC = HSPLL_HS |
| #pragma config FCMEN = OFF |
| #pragma config IESO = OFF |
| #pragma config PWRT = OFF |
| #pragma config BOR = ON |
| #pragma config BORV = 3 |
| #pragma config VREGEN = ON |
| #pragma config WDT = OFF |
| #pragma config WDTPS = 32768 |
| #pragma config MCLRE = ON |
| #pragma config LPT1OSC = OFF |
| #pragma config PBADEN = OFF |
| #pragma config CCP2MX = ON |
| #pragma config STVREN = ON |
| #pragma config LVP = OFF |
| //#pragma config ICPRT = OFF // Dedicated In-Circuit Debug/Programming |
| #pragma config XINST = OFF // Extended Instruction Set |
| #pragma config CP0 = OFF |
| #pragma config CP1 = OFF |
| #pragma config CP2 = OFF |
| //#pragma config CP3 = OFF |
| #pragma config CPB = OFF |
| #pragma config CPD = OFF |
| #pragma config WRT0 = OFF |
| #pragma config WRT1 = OFF |
| #pragma config WRT2 = OFF |
| //#pragma config WRT3 = OFF |
| #pragma config WRTB = ON // Boot Block Write Protection |
| #pragma config WRTC = OFF |
| #pragma config WRTD = OFF |
| #pragma config EBTR0 = OFF |
| #pragma config EBTR1 = OFF |
| #pragma config EBTR2 = OFF |
| //#pragma config EBTR3 = OFF |
| #pragma config EBTRB = OFF |
| #elif defined(UBW32) |
| #else |
| #error No hardware board defined, see "HardwareProfile.h" and __FILE__ |
| #endif |
| /** VARIABLES ******************************************************/ |
| #pragma udata |
| /** PRIVATE PROTOTYPES *********************************************/ |
| static void InitializeSystem(void); |
| void USBDeviceTasks(void); |
| void YourHighPriorityISRCode(void); |
| void YourLowPriorityISRCode(void); |
| /** VECTOR REMAPPING ***********************************************/ |
| #if defined(__18CXX) |
| //On PIC18 devices, addresses 0x00, 0x08, and 0x18 are used for |
| //the reset, high priority interrupt, and low priority interrupt |
| //vectors. However, the current Microchip USB bootloader |
| //examples are intended to occupy addresses 0x00-0x7FF or |
| //0x00-0xFFF depending on which bootloader is used. Therefore, |
| //the bootloader code remaps these vectors to new locations |
| //as indicated below. This remapping is only necessary if you |
| //wish to program the hex file generated from this project with |
| //the USB bootloader. If no bootloader is used, edit the |
| //usb_config.h file and comment out the following defines: |
| //#define PROGRAMMABLE_WITH_USB_HID_BOOTLOADER |
| //#define PROGRAMMABLE_WITH_USB_LEGACY_CUSTOM_CLASS_BOOTLOADER |
| #if defined(PROGRAMMABLE_WITH_USB_HID_BOOTLOADER) |
| #define REMAPPED_RESET_VECTOR_ADDRESS 0x1000 |
| #define REMAPPED_HIGH_INTERRUPT_VECTOR_ADDRESS 0x1008 |
| #define REMAPPED_LOW_INTERRUPT_VECTOR_ADDRESS 0x1018 |
| #elif defined(PROGRAMMABLE_WITH_USB_MCHPUSB_BOOTLOADER) |
| #define REMAPPED_RESET_VECTOR_ADDRESS 0x800 |
| #define REMAPPED_HIGH_INTERRUPT_VECTOR_ADDRESS 0x808 |
| #define REMAPPED_LOW_INTERRUPT_VECTOR_ADDRESS 0x818 |
| #else |
| #define REMAPPED_RESET_VECTOR_ADDRESS 0x00 |
| #define REMAPPED_HIGH_INTERRUPT_VECTOR_ADDRESS 0x08 |
| #define REMAPPED_LOW_INTERRUPT_VECTOR_ADDRESS 0x18 |
| #endif |
| #if defined(PROGRAMMABLE_WITH_USB_HID_BOOTLOADER)||defined(PROGRAMMABLE_WITH_USB_MCHPUSB_BOOTLOADER) |
| extern void _startup (void); // See c018i.c in your C18 compiler dir |
| #pragma code REMAPPED_RESET_VECTOR = REMAPPED_RESET_VECTOR_ADDRESS |
| void _reset (void) |
| { |
| _asm goto _startup _endasm |
| } |
| #endif |
| #pragma code REMAPPED_HIGH_INTERRUPT_VECTOR = REMAPPED_HIGH_INTERRUPT_VECTOR_ADDRESS |
| void Remapped_High_ISR (void) |
| { |
| _asm goto YourHighPriorityISRCode _endasm |
| } |
| #pragma code REMAPPED_LOW_INTERRUPT_VECTOR = REMAPPED_LOW_INTERRUPT_VECTOR_ADDRESS |
| void Remapped_Low_ISR (void) |
| { |
| _asm goto YourLowPriorityISRCode _endasm |
| } |
| #if defined(PROGRAMMABLE_WITH_USB_HID_BOOTLOADER)||defined(PROGRAMMABLE_WITH_USB_MCHPUSB_BOOTLOADER) |
| //Note: If this project is built while one of the bootloaders has |
| //been defined, but then the output hex file is not programmed with |
| //the bootloader, addresses 0x08 and 0x18 would end up programmed with 0xFFFF. |
| //As a result, if an actual interrupt was enabled and occured, the PC would jump |
| //to 0x08 (or 0x18) and would begin executing "0xFFFF" (unprogrammed space). This |
| //executes as nop instructions, but the PC would eventually reach the REMAPPED_RESET_VECTOR_ADDRESS |
| //(0x1000 or 0x800, depending upon bootloader), and would execute the "goto _startup". This |
| //would effective reset the application. |
| //To fix this situation, we should always deliberately place a |
| //"goto REMAPPED_HIGH_INTERRUPT_VECTOR_ADDRESS" at address 0x08, and a |
| //"goto REMAPPED_LOW_INTERRUPT_VECTOR_ADDRESS" at address 0x18. When the output |
| //hex file of this project is programmed with the bootloader, these sections do not |
| //get bootloaded (as they overlap the bootloader space). If the output hex file is not |
| //programmed using the bootloader, then the below goto instructions do get programmed, |
| //and the hex file still works like normal. The below section is only required to fix this |
| //scenario. |
| #pragma code HIGH_INTERRUPT_VECTOR = 0x08 |
| void High_ISR (void) |
| { |
| _asm goto REMAPPED_HIGH_INTERRUPT_VECTOR_ADDRESS _endasm |
| } |
| #pragma code LOW_INTERRUPT_VECTOR = 0x18 |
| void Low_ISR (void) |
| { |
| _asm goto REMAPPED_LOW_INTERRUPT_VECTOR_ADDRESS _endasm |
| } |
| #endif //end of "#if defined(PROGRAMMABLE_WITH_USB_HID_BOOTLOADER)||defined(PROGRAMMABLE_WITH_USB_LEGACY_CUSTOM_CLASS_BOOTLOADER)" |
| #pragma code |
| //These are your actual interrupt handling routines. |
| #pragma interrupt YourHighPriorityISRCode |
| void YourHighPriorityISRCode() |
| { |
| //Check which interrupt flag caused the interrupt. |
| //Service the interrupt |
| //Clear the interrupt flag |
| //Etc. |
| #if defined(USB_INTERRUPT) |
| USBDeviceTasks(); |
| #endif |
| } //This return will be a "retfie fast", since this is in a #pragma interrupt section |
| #pragma interruptlow YourLowPriorityISRCode |
| void YourLowPriorityISRCode() |
| { |
| //Check which interrupt flag caused the interrupt. |
| //Service the interrupt |
| //Clear the interrupt flag |
| //Etc. |
| } //This return will be a "retfie", since this is in a #pragma interruptlow section |
| #elif defined(__C30__) |
| #if defined(PROGRAMMABLE_WITH_USB_HID_BOOTLOADER) |
| /* |
| * ISR JUMP TABLE |
| * |
| * It is necessary to define jump table as a function because C30 will |
| * not store 24-bit wide values in program memory as variables. |
| * |
| * This function should be stored at an address where the goto instructions |
| * line up with the remapped vectors from the bootloader's linker script. |
| * |
| * For more information about how to remap the interrupt vectors, |
| * please refer to AN1157. An example is provided below for the T2 |
| * interrupt with a bootloader ending at address 0x1400 |
| */ |
| // void __attribute__ ((address(0x1404))) ISRTable(){ |
| // |
| // asm("reset"); //reset instruction to prevent runaway code |
| // asm("goto %0"::"i"(&_T2Interrupt)); //T2Interrupt's address |
| // } |
| #endif |
| #endif |
| /** DECLARATIONS ***************************************************/ |
| #pragma code |
| /****************************************************************************** |
| * Function: void main(void) |
| * |
| * PreCondition: None |
| * |
| * Input: None |
| * |
| * Output: None |
| * |
| * Side Effects: None |
| * |
| * Overview: Main program entry point. |
| * |
| * Note: None |
| *******************************************************************/ |
| #if defined(__18CXX) |
| void main(void) |
| #else |
| int main(void) |
| #endif |
| { |
| InitializeSystem(); |
| #if defined(USB_INTERRUPT) |
| USBDeviceAttach(); |
| #endif |
| while(1) |
| { |
| #if defined(USB_POLLING) |
| // Check bus status and service USB interrupts. |
| USBDeviceTasks(); // Interrupt or polling method. If using polling, must call |
| // this function periodically. This function will take care |
| // of processing and responding to SETUP transactions |
| // (such as during the enumeration process when you first |
| // plug in). USB hosts require that USB devices should accept |
| // and process SETUP packets in a timely fashion. Therefore, |
| // when using polling, this function should be called |
| // frequently (such as once about every 100 microseconds) at any |
| // time that a SETUP packet might reasonably be expected to |
| // be sent by the host to your device. In most cases, the |
| // USBDeviceTasks() function does not take very long to |
| // execute (~50 instruction cycles) before it returns. |
| #endif |
| // Application-specific tasks. |
| // Application related code may be added here, or in the ProcessIO() function. |
| ProcessIO(); |
| }//end while |
| }//end main |
| /******************************************************************** |
| * Function: static void InitializeSystem(void) |
| * |
| * PreCondition: None |
| * |
| * Input: None |
| * |
| * Output: None |
| * |
| * Side Effects: None |
| * |
| * Overview: InitializeSystem is a centralize initialization |
| * routine. All required USB initialization routines |
| * are called from here. |
| * |
| * User application initialization routine should |
| * also be called from here. |
| * |
| * Note: None |
| *******************************************************************/ |
| static void InitializeSystem(void) |
| { |
| #if (defined(__18CXX) & !defined(PIC18F87J50_PIM)) |
| ADCON1 |= 0x0F; // Default all pins to digital |
| #elif defined(__C30__) |
| #if defined(PIC24FJ256DA210_DEV_BOARD) |
| ANSA = 0x0000; |
| ANSB = 0x0000; |
| ANSC = 0x0000; |
| ANSD = 0x0000; |
| ANSE = 0x0000; |
| ANSF = 0x0000; |
| ANSG = 0x0000; |
| #else |
| AD1PCFGL = 0xFFFF; |
| #endif |
| #elif defined(__C32__) |
| AD1PCFG = 0xFFFF; |
| #endif |
| #if defined(PIC18F87J50_PIM) || defined(PIC18F46J50_PIM) || defined(PIC18F_STARTER_KIT_1) |
| //On the PIC18F87J50 Family of USB microcontrollers, the PLL will not power up and be enabled |
| //by default, even if a PLL enabled oscillator configuration is selected (such as HS+PLL). |
| //This allows the device to power up at a lower initial operating frequency, which can be |
| //advantageous when powered from a source which is not gauranteed to be adequate for 48MHz |
| //operation. On these devices, user firmware needs to manually set the OSCTUNE<PLLEN> bit to |
| //power up the PLL. |
| { |
| unsigned int pll_startup_counter = 600; |
| OSCTUNEbits.PLLEN = 1; //Enable the PLL and wait 2+ms until the PLL locks before enabling USB module |
| while(pll_startup_counter--); |
| } |
| //Device switches over automatically to PLL output after PLL is locked and ready. |
| #endif |
| #if defined(PIC18F87J50_PIM) |
| //Configure all I/O pins to use digital input buffers. The PIC18F87J50 Family devices |
| //use the ANCONx registers to control this, which is different from other devices which |
| //use the ADCON1 register for this purpose. |
| WDTCONbits.ADSHR = 1; // Select alternate SFR location to access ANCONx registers |
| ANCON0 = 0xFF; // Default all pins to digital |
| ANCON1 = 0xFF; // Default all pins to digital |
| WDTCONbits.ADSHR = 0; // Select normal SFR locations |
| #endif |
| #if defined(PIC18F46J50_PIM) || defined(PIC18F_STARTER_KIT_1) |
| //Configure all I/O pins to use digital input buffers. |
| ANCON0 = 0x7F; // all pins to digital except AN7 |
| ANCON1 = 0xBF; // Default all pins to digital. Bandgap on. |
| #endif |
| #if defined(PIC24FJ64GB004_PIM) || defined(PIC24FJ256DA210_DEV_BOARD) |
| //On the PIC24FJ64GB004 Family of USB microcontrollers, the PLL will not power up and be enabled |
| //by default, even if a PLL enabled oscillator configuration is selected (such as HS+PLL). |
| //This allows the device to power up at a lower initial operating frequency, which can be |
| //advantageous when powered from a source which is not gauranteed to be adequate for 32MHz |
| //operation. On these devices, user firmware needs to manually set the CLKDIV<PLLEN> bit to |
| //power up the PLL. |
| { |
| unsigned int pll_startup_counter = 600; |
| CLKDIVbits.PLLEN = 1; |
| while(pll_startup_counter--); |
| } |
| //Device switches over automatically to PLL output after PLL is locked and ready. |
| #endif |
| // The USB specifications require that USB peripheral devices must never source |
| // current onto the Vbus pin. Additionally, USB peripherals should not source |
| // current on D+ or D- when the host/hub is not actively powering the Vbus line. |
| // When designing a self powered (as opposed to bus powered) USB peripheral |
| // device, the firmware should make sure not to turn on the USB module and D+ |
| // or D- pull up resistor unless Vbus is actively powered. Therefore, the |
| // firmware needs some means to detect when Vbus is being powered by the host. |
| // A 5V tolerant I/O pin can be connected to Vbus (through a resistor), and |
| // can be used to detect when Vbus is high (host actively powering), or low |
| // (host is shut down or otherwise not supplying power). The USB firmware |
| // can then periodically poll this I/O pin to know when it is okay to turn on |
| // the USB module/D+/D- pull up resistor. When designing a purely bus powered |
| // peripheral device, it is not possible to source current on D+ or D- when the |
| // host is not actively providing power on Vbus. Therefore, implementing this |
| // bus sense feature is optional. This firmware can be made to use this bus |
| // sense feature by making sure "USE_USB_BUS_SENSE_IO" has been defined in the |
| // HardwareProfile.h file. |
| #if defined(USE_USB_BUS_SENSE_IO) |
| tris_usb_bus_sense = INPUT_PIN; // See HardwareProfile.h |
| #endif |
| // If the host PC sends a GetStatus (device) request, the firmware must respond |
| // and let the host know if the USB peripheral device is currently bus powered |
| // or self powered. See chapter 9 in the official USB specifications for details |
| // regarding this request. If the peripheral device is capable of being both |
| // self and bus powered, it should not return a hard coded value for this request. |
| // Instead, firmware should check if it is currently self or bus powered, and |
| // respond accordingly. If the hardware has been configured like demonstrated |
| // on the PICDEM FS USB Demo Board, an I/O pin can be polled to determine the |
| // currently selected power source. On the PICDEM FS USB Demo Board, "RA2" |
| // is used for this purpose. If using this feature, make sure "USE_SELF_POWER_SENSE_IO" |
| // has been defined in HardwareProfile - (platform).h, and that an appropriate I/O pin |
| // has been mapped to it. |
| #if defined(USE_SELF_POWER_SENSE_IO) |
| tris_self_power = INPUT_PIN; // See HardwareProfile |
| #endif |
| UserInit(); |
| USBDeviceInit(); //usb_device.c. Initializes USB module SFRs and firmware |
| //variables to known states. |
| }//end InitializeSystem |
| // ****************************************************************************************************** |
| // ************** USB Callback Functions **************************************************************** |
| // ****************************************************************************************************** |
| // The USB firmware stack will call the callback functions USBCBxxx() in response to certain USB related |
| // events. For example, if the host PC is powering down, it will stop sending out Start of Frame (SOF) |
| // packets to your device. In response to this, all USB devices are supposed to decrease their power |
| // consumption from the USB Vbus to <2.5mA each. The USB module detects this condition (which according |
| // to the USB specifications is 3+ms of no bus activity/SOF packets) and then calls the USBCBSuspend() |
| // function. You should modify these callback functions to take appropriate actions for each of these |
| // conditions. For example, in the USBCBSuspend(), you may wish to add code that will decrease power |
| // consumption from Vbus to <2.5mA (such as by clock switching, turning off LEDs, putting the |
| // microcontroller to sleep, etc.). Then, in the USBCBWakeFromSuspend() function, you may then wish to |
| // add code that undoes the power saving things done in the USBCBSuspend() function. |
| // The USBCBSendResume() function is special, in that the USB stack will not automatically call this |
| // function. This function is meant to be called from the application firmware instead. See the |
| // additional comments near the function. |
| /****************************************************************************** |
| * Function: void USBCBSuspend(void) |
| * |
| * PreCondition: None |
| * |
| * Input: None |
| * |
| * Output: None |
| * |
| * Side Effects: None |
| * |
| * Overview: Call back that is invoked when a USB suspend is detected |
| * |
| * Note: None |
| *****************************************************************************/ |
| void USBCBSuspend(void) |
| { |
| //Example power saving code. Insert appropriate code here for the desired |
| //application behavior. If the microcontroller will be put to sleep, a |
| //process similar to that shown below may be used: |
| //ConfigureIOPinsForLowPower(); |
| //SaveStateOfAllInterruptEnableBits(); |
| //DisableAllInterruptEnableBits(); |
| //EnableOnlyTheInterruptsWhichWillBeUsedToWakeTheMicro(); //should enable at least USBActivityIF as a wake source |
| //Sleep(); |
| //RestoreStateOfAllPreviouslySavedInterruptEnableBits(); //Preferrably, this should be done in the USBCBWakeFromSuspend() function instead. |
| //RestoreIOPinsToNormal(); //Preferrably, this should be done in the USBCBWakeFromSuspend() function instead. |
| //IMPORTANT NOTE: Do not clear the USBActivityIF (ACTVIF) bit here. This bit is |
| //cleared inside the usb_device.c file. Clearing USBActivityIF here will cause |
| //things to not work as intended. |
| #if defined(__C30__) |
| #if 0 |
| U1EIR = 0xFFFF; |
| U1IR = 0xFFFF; |
| U1OTGIR = 0xFFFF; |
| IFS5bits.USB1IF = 0; |
| IEC5bits.USB1IE = 1; |
| U1OTGIEbits.ACTVIE = 1; |
| U1OTGIRbits.ACTVIF = 1; |
| Sleep(); |
| #endif |
| #endif |
| } |
| /****************************************************************************** |
| * Function: void _USB1Interrupt(void) |
| * |
| * PreCondition: None |
| * |
| * Input: None |
| * |
| * Output: None |
| * |
| * Side Effects: None |
| * |
| * Overview: This function is called when the USB interrupt bit is set |
| * In this example the interrupt is only used when the device |
| * goes to sleep when it receives a USB suspend command |
| * |
| * Note: None |
| *****************************************************************************/ |
| #if 0 |
| void __attribute__ ((interrupt)) _USB1Interrupt(void) |
| { |
| #if !defined(self_powered) |
| if(U1OTGIRbits.ACTVIF) |
| { |
| IEC5bits.USB1IE = 0; |
| U1OTGIEbits.ACTVIE = 0; |
| IFS5bits.USB1IF = 0; |
| //USBClearInterruptFlag(USBActivityIFReg,USBActivityIFBitNum); |
| USBClearInterruptFlag(USBIdleIFReg,USBIdleIFBitNum); |
| //USBSuspendControl = 0; |
| } |
| #endif |
| } |
| #endif |
| /****************************************************************************** |
| * Function: void USBCBWakeFromSuspend(void) |
| * |
| * PreCondition: None |
| * |
| * Input: None |
| * |
| * Output: None |
| * |
| * Side Effects: None |
| * |
| * Overview: The host may put USB peripheral devices in low power |
| * suspend mode (by "sending" 3+ms of idle). Once in suspend |
| * mode, the host may wake the device back up by sending non- |
| * idle state signalling. |
| * |
| * This call back is invoked when a wakeup from USB suspend |
| * is detected. |
| * |
| * Note: None |
| *****************************************************************************/ |
| void USBCBWakeFromSuspend(void) |
| { |
| // If clock switching or other power savings measures were taken when |
| // executing the USBCBSuspend() function, now would be a good time to |
| // switch back to normal full power run mode conditions. The host allows |
| // a few milliseconds of wakeup time, after which the device must be |
| // fully back to normal, and capable of receiving and processing USB |
| // packets. In order to do this, the USB module must receive proper |
| // clocking (IE: 48MHz clock must be available to SIE for full speed USB |
| // operation). |
| } |
| /******************************************************************** |
| * Function: void USBCB_SOF_Handler(void) |
| * |
| * PreCondition: None |
| * |
| * Input: None |
| * |
| * Output: None |
| * |
| * Side Effects: None |
| * |
| * Overview: The USB host sends out a SOF packet to full-speed |
| * devices every 1 ms. This interrupt may be useful |
| * for isochronous pipes. End designers should |
| * implement callback routine as necessary. |
| * |
| * Note: None |
| *******************************************************************/ |
| void USBCB_SOF_Handler(void) |
| { |
| // No need to clear UIRbits.SOFIF to 0 here. |
| // Callback caller is already doing that. |
| } |
| /******************************************************************* |
| * Function: void USBCBErrorHandler(void) |
| * |
| * PreCondition: None |
| * |
| * Input: None |
| * |
| * Output: None |
| * |
| * Side Effects: None |
| * |
| * Overview: The purpose of this callback is mainly for |
| * debugging during development. Check UEIR to see |
| * which error causes the interrupt. |
| * |
| * Note: None |
| *******************************************************************/ |
| void USBCBErrorHandler(void) |
| { |
| // No need to clear UEIR to 0 here. |
| // Callback caller is already doing that. |
| // Typically, user firmware does not need to do anything special |
| // if a USB error occurs. For example, if the host sends an OUT |
| // packet to your device, but the packet gets corrupted (ex: |
| // because of a bad connection, or the user unplugs the |
| // USB cable during the transmission) this will typically set |
| // one or more USB error interrupt flags. Nothing specific |
| // needs to be done however, since the SIE will automatically |
| // send a "NAK" packet to the host. In response to this, the |
| // host will normally retry to send the packet again, and no |
| // data loss occurs. The system will typically recover |
| // automatically, without the need for application firmware |
| // intervention. |
| // Nevertheless, this callback function is provided, such as |
| // for debugging purposes. |
| } |
| /******************************************************************* |
| * Function: void USBCBCheckOtherReq(void) |
| * |
| * PreCondition: None |
| * |
| * Input: None |
| * |
| * Output: None |
| * |
| * Side Effects: None |
| * |
| * Overview: When SETUP packets arrive from the host, some |
| * firmware must process the request and respond |
| * appropriately to fulfill the request. Some of |
| * the SETUP packets will be for standard |
| * USB "chapter 9" (as in, fulfilling chapter 9 of |
| * the official USB specifications) requests, while |
| * others may be specific to the USB device class |
| * that is being implemented. For example, a HID |
| * class device needs to be able to respond to |
| * "GET REPORT" type of requests. This |
| * is not a standard USB chapter 9 request, and |
| * therefore not handled by usb_device.c. Instead |
| * this request should be handled by class specific |
| * firmware, such as that contained in usb_function_hid.c. |
| * |
| * Note: None |
| *****************************************************************************/ |
| void USBCBCheckOtherReq(void) |
| { |
| USBCheckUBWRequest(); |
| }//end |
| /******************************************************************* |
| * Function: void USBCBStdSetDscHandler(void) |
| * |
| * PreCondition: None |
| * |
| * Input: None |
| * |
| * Output: None |
| * |
| * Side Effects: None |
| * |
| * Overview: The USBCBStdSetDscHandler() callback function is |
| * called when a SETUP, bRequest: SET_DESCRIPTOR request |
| * arrives. Typically SET_DESCRIPTOR requests are |
| * not used in most applications, and it is |
| * optional to support this type of request. |
| * |
| * Note: None |
| *****************************************************************************/ |
| void USBCBStdSetDscHandler(void) |
| { |
| // Must claim session ownership if supporting this request |
| }//end |
| /****************************************************************************** |
| * Function: void USBCBInitEP(void) |
| * |
| * PreCondition: None |
| * |
| * Input: None |
| * |
| * Output: None |
| * |
| * Side Effects: None |
| * |
| * Overview: This function is called when the device becomes |
| * initialized, which occurs after the host sends a |
| * SET_CONFIGURATION (wValue not = 0) request. This |
| * callback function should initialize the endpoints |
| * for the device's usage according to the current |
| * configuration. |
| * |
| * Note: None |
| *****************************************************************************/ |
| void USBCBInitEP(void) |
| { |
| } |
| /******************************************************************** |
| * Function: void USBCBSendResume(void) |
| * |
| * PreCondition: None |
| * |
| * Input: None |
| * |
| * Output: None |
| * |
| * Side Effects: None |
| * |
| * Overview: The USB specifications allow some types of USB |
| * peripheral devices to wake up a host PC (such |
| * as if it is in a low power suspend to RAM state). |
| * This can be a very useful feature in some |
| * USB applications, such as an Infrared remote |
| * control receiver. If a user presses the "power" |
| * button on a remote control, it is nice that the |
| * IR receiver can detect this signalling, and then |
| * send a USB "command" to the PC to wake up. |
| * |
| * The USBCBSendResume() "callback" function is used |
| * to send this special USB signalling which wakes |
| * up the PC. This function may be called by |
| * application firmware to wake up the PC. This |
| * function should only be called when: |
| * |
| * 1. The USB driver used on the host PC supports |
| * the remote wakeup capability. |
| * 2. The USB configuration descriptor indicates |
| * the device is remote wakeup capable in the |
| * bmAttributes field. |
| * 3. The USB host PC is currently sleeping, |
| * and has previously sent your device a SET |
| * FEATURE setup packet which "armed" the |
| * remote wakeup capability. |
| * |
| * This callback should send a RESUME signal that |
| * has the period of 1-15ms. |
| * |
| * Note: Interrupt vs. Polling |
| * -Primary clock |
| * -Secondary clock ***** MAKE NOTES ABOUT THIS ******* |
| * > Can switch to primary first by calling USBCBWakeFromSuspend() |
| * The modifiable section in this routine should be changed |
| * to meet the application needs. Current implementation |
| * temporary blocks other functions from executing for a |
| * period of 1-13 ms depending on the core frequency. |
| * |
| * According to USB 2.0 specification section 7.1.7.7, |
| * "The remote wakeup device must hold the resume signaling |
| * for at lest 1 ms but for no more than 15 ms." |
| * The idea here is to use a delay counter loop, using a |
| * common value that would work over a wide range of core |
| * frequencies. |
| * That value selected is 1800. See table below: |
| * ========================================================== |
| * Core Freq(MHz) MIP RESUME Signal Period (ms) |
| * ========================================================== |
| * 48 12 1.05 |
| * 4 1 12.6 |
| * ========================================================== |
| * * These timing could be incorrect when using code |
| * optimization or extended instruction mode, |
| * or when having other interrupts enabled. |
| * Make sure to verify using the MPLAB SIM's Stopwatch |
| * and verify the actual signal on an oscilloscope. |
| *******************************************************************/ |
| void USBCBSendResume(void) |
| { |
| static WORD delay_count; |
| USBResumeControl = 1; // Start RESUME signaling |
| delay_count = 1800U; // Set RESUME line for 1-13 ms |
| do |
| { |
| delay_count--; |
| }while(delay_count); |
| USBResumeControl = 0; |
| } |
| /******************************************************************* |
| * Function: BOOL USER_USB_CALLBACK_EVENT_HANDLER( |
| * USB_EVENT event, void *pdata, WORD size) |
| * |
| * PreCondition: None |
| * |
| * Input: USB_EVENT event - the type of event |
| * void *pdata - pointer to the event data |
| * WORD size - size of the event data |
| * |
| * Output: None |
| * |
| * Side Effects: None |
| * |
| * Overview: This function is called from the USB stack to |
| * notify a user application that a USB event |
| * occured. This callback is in interrupt context |
| * when the USB_INTERRUPT option is selected. |
| * |
| * Note: None |
| *******************************************************************/ |
| BOOL USER_USB_CALLBACK_EVENT_HANDLER(USB_EVENT event, void *pdata, WORD size) |
| { |
| switch(event) |
| { |
| case EVENT_CONFIGURED: |
| USBCBInitEP(); |
| break; |
| case EVENT_SET_DESCRIPTOR: |
| USBCBStdSetDscHandler(); |
| break; |
| case EVENT_EP0_REQUEST: |
| USBCBCheckOtherReq(); |
| break; |
| case EVENT_SOF: |
| USBCB_SOF_Handler(); |
| break; |
| case EVENT_SUSPEND: |
| USBCBSuspend(); |
| break; |
| case EVENT_RESUME: |
| USBCBWakeFromSuspend(); |
| break; |
| case EVENT_BUS_ERROR: |
| USBCBErrorHandler(); |
| break; |
| case EVENT_TRANSFER: |
| Nop(); |
| break; |
| default: |
| break; |
| } |
| return TRUE; |
| } |
| /** EOF main.c ***************************************************************/ |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/CleanUp.bat |
|---|
| 0,0 → 1,92 |
| @echo off |
| REM Remove files generated by compiler in this directory |
| REM and all subdirectories. |
| echo Removing *.$$$ files... |
| del *.$$$ /f /q /s |
| echo. |
| echo Removing *.bkx files... |
| del *.bkx /f /q /s |
| echo. |
| echo Removing *.cce files... |
| del *.cce /f /q /s |
| echo. |
| echo Removing *.cod files... |
| del *.cod /f /q /s |
| echo. |
| echo Removing *.cof files... |
| del *.cof /f /q /s |
| echo. |
| echo Removing *.err files... |
| del *.err /f /q /s |
| echo. |
| echo Removing *.hex files... |
| del *.hex /f /q /s |
| echo. |
| echo Removing *.i files... |
| del *.i /f /q /s |
| echo. |
| echo Removing *.lde files... |
| del *.lde /f /q /s |
| echo. |
| echo Removing *.lst files... |
| del *.lst /f /q /s |
| echo. |
| echo Removing *.obj files... |
| del *.obj /f /q /s |
| echo. |
| echo Removing *.o files... |
| del *.o /f /q /s |
| echo. |
| echo Removing *.rlf files... |
| del *.rlf /f /q /s |
| echo. |
| echo Removing *.sym files... |
| del *.sym /f /q /s |
| echo. |
| echo Removing *.sdb files... |
| del *.sdb /f /q /s |
| echo. |
| echo Removing *.wat files... |
| del *.wat /f /q /s |
| echo. |
| echo Removing *.mcs files... |
| del *.mcs /f /q /s |
| echo. |
| echo Removing *.mptags files... |
| del *.mptags /f /q /s |
| echo. |
| echo Removing *.tagsrc files... |
| del *.tagsrc /f /q /s |
| echo. |
| echo Removing *.map files... |
| del *.map /f /q /s |
| echo. |
| echo Removing *.elf files... |
| del *.elf /f /q /s |
| echo. |
| rd Objects /S /Q |
| echo Done. |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/HardwareProfile - Low Pin Count USB Development Kit.h |
|---|
| 0,0 → 1,135 |
| /******************************************************************** |
| FileName: HardwareProfile - Low Pin Count USB Development Kit.h |
| Dependencies: See INCLUDES section |
| Processor: PIC18 or PIC24 USB Microcontrollers |
| Hardware: Low Pin Count USB Development Kit |
| Compiler: Microchip C18 |
| Company: Microchip Technology, Inc. |
| Software License Agreement: |
| The software supplied herewith by Microchip Technology Incorporated |
| (the Company) for its PIC® Microcontroller is intended and |
| supplied to you, the Companys customer, for use solely and |
| exclusively on Microchip PIC Microcontroller products. The |
| software is owned by the Company and/or its supplier, and is |
| protected under applicable copyright laws. All rights are reserved. |
| Any use in violation of the foregoing restrictions may subject the |
| user to criminal sanctions under applicable laws, as well as to |
| civil liability for the breach of the terms and conditions of this |
| license. |
| THIS SOFTWARE IS PROVIDED IN AN AS IS CONDITION. NO WARRANTIES, |
| WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED |
| TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, |
| IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR |
| CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. |
| ******************************************************************** |
| File Description: |
| Change History: |
| Rev Date Description |
| 1.0 11/19/2004 Initial release |
| 2.1 02/26/2007 Updated for simplicity and to use common |
| coding style |
| 2.3 09/15/2008 Broke out each hardware platform into its own |
| "HardwareProfile - xxx.h" file |
| ********************************************************************/ |
| #ifndef HARDWARE_PROFILE_LOW_PIN_COUNT_USB_DEVELOPMENT_KIT_H |
| #define HARDWARE_PROFILE_LOW_PIN_COUNT_USB_DEVELOPMENT_KIT_H |
| /*******************************************************************/ |
| /******** USB stack hardware selection options *********************/ |
| /*******************************************************************/ |
| //This section is the set of definitions required by the MCHPFSUSB |
| // framework. These definitions tell the firmware what mode it is |
| // running in, and where it can find the results to some information |
| // that the stack needs. |
| //These definitions are required by every application developed with |
| // this revision of the MCHPFSUSB framework. Please review each |
| // option carefully and determine which options are desired/required |
| // for your application. |
| //#define USE_SELF_POWER_SENSE_IO |
| #define tris_self_power TRISAbits.TRISA2 // Input |
| #if defined(USE_SELF_POWER_SENSE_IO) |
| #define self_power PORTAbits.RA2 |
| #else |
| #define self_power 1 |
| #endif |
| //#define USE_USB_BUS_SENSE_IO |
| #define tris_usb_bus_sense TRISAbits.TRISA1 // Input |
| #if defined(USE_USB_BUS_SENSE_IO) |
| #define USB_BUS_SENSE PORTAbits.RA1 |
| #else |
| #define USB_BUS_SENSE 1 |
| #endif |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /******** Application specific definitions *************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| //Uncomment the following line to make the output HEX of this |
| // project work with the HID Bootloader |
| #define PROGRAMMABLE_WITH_USB_HID_BOOTLOADER |
| /** Board definition ***********************************************/ |
| //These defintions will tell the main() function which board is |
| // currently selected. This will allow the application to add |
| // the correct configuration bits as wells use the correct |
| // initialization functions for the board. These defitions are only |
| // required in the stack provided demos. They are not required in |
| // final application design. |
| #define DEMO_BOARD LOW_PIN_COUNT_USB_DEVELOPMENT_KIT |
| #define LOW_PIN_COUNT_USB_DEVELOPMENT_KIT |
| #define CLOCK_FREQ 48000000 |
| /** LED ************************************************************/ |
| #define mInitAllLEDs() LATC &= 0xF0; TRISC &= 0xF0; |
| #define mLED_1 LATCbits.LATC0 |
| #define mLED_2 LATCbits.LATC1 |
| #define mLED_3 LATCbits.LATC2 |
| #define mLED_4 LATCbits.LATC3 |
| #define mGetLED_1() mLED_1 |
| #define mGetLED_2() mLED_2 |
| #define mGetLED_3() mLED_3 |
| #define mGetLED_4() mLED_4 |
| #define mLED_1_On() mLED_1 = 1; |
| #define mLED_2_On() mLED_2 = 1; |
| #define mLED_3_On() mLED_3 = 1; |
| #define mLED_4_On() mLED_4 = 1; |
| #define mLED_1_Off() mLED_1 = 0; |
| #define mLED_2_Off() mLED_2 = 0; |
| #define mLED_3_Off() mLED_3 = 0; |
| #define mLED_4_Off() mLED_4 = 0; |
| #define mLED_1_Toggle() mLED_1 = !mLED_1; |
| #define mLED_2_Toggle() mLED_2 = !mLED_2; |
| #define mLED_3_Toggle() mLED_3 = !mLED_3; |
| #define mLED_4_Toggle() mLED_4 = !mLED_4; |
| /** SWITCH *********************************************************/ |
| #define mInitSwitch2() //TRISAbits.TRISA3=1 |
| //only one switch available so double duty |
| #define mInitSwitch3() //TRISAbits.TRISA3=1 |
| #define sw2 PORTAbits.RA3 |
| #define sw3 PORTAbits.RA3 |
| #define mInitAllSwitches() mInitSwitch2(); |
| /** POT ************************************************************/ |
| #define mInitPOT() {TRISBbits.TRISB4=1;ADCON0=0x29;ADCON1=0;ADCON2=0x3E;ADCON2bits.ADFM = 1;} |
| #endif //HARDWARE_PROFILE_LOW_PIN_COUNT_USB_DEVELOPMENT_KIT_H |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/HardwareProfile - PIC18F46J50 PIM.h |
|---|
| 0,0 → 1,130 |
| /******************************************************************** |
| FileName: HardwareProfile - PIC18F46J50 PIM.h |
| Dependencies: See INCLUDES section |
| Processor: PIC18 USB Microcontrollers |
| Hardware: PIC18F46J50 PIM |
| Compiler: Microchip C18 |
| Company: Microchip Technology, Inc. |
| Software License Agreement: |
| The software supplied herewith by Microchip Technology Incorporated |
| (the Company) for its PIC® Microcontroller is intended and |
| supplied to you, the Companys customer, for use solely and |
| exclusively on Microchip PIC Microcontroller products. The |
| software is owned by the Company and/or its supplier, and is |
| protected under applicable copyright laws. All rights are reserved. |
| Any use in violation of the foregoing restrictions may subject the |
| user to criminal sanctions under applicable laws, as well as to |
| civil liability for the breach of the terms and conditions of this |
| license. |
| THIS SOFTWARE IS PROVIDED IN AN AS IS CONDITION. NO WARRANTIES, |
| WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED |
| TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, |
| IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR |
| CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. |
| ******************************************************************** |
| File Description: |
| Change History: |
| Rev Date Description |
| 1.0 11/19/2004 Initial release |
| 2.1 02/26/2007 Updated for simplicity and to use common |
| coding style |
| 2.3 09/15/2008 Broke out each hardware platform into its own |
| "HardwareProfile - xxx.h" file |
| ********************************************************************/ |
| #ifndef HARDWARE_PROFILE_PIC18F46J50_PIM_H |
| #define HARDWARE_PROFILE_PIC18F46J50_PIM_H |
| /*******************************************************************/ |
| /******** USB stack hardware selection options *********************/ |
| /*******************************************************************/ |
| //This section is the set of definitions required by the MCHPFSUSB |
| // framework. These definitions tell the firmware what mode it is |
| // running in, and where it can find the results to some information |
| // that the stack needs. |
| //These definitions are required by every application developed with |
| // this revision of the MCHPFSUSB framework. Please review each |
| // option carefully and determine which options are desired/required |
| // for your application. |
| //#define USE_SELF_POWER_SENSE_IO |
| #define tris_self_power TRISCbits.TRISC2 // Input |
| #define self_power 1 |
| //#define USE_USB_BUS_SENSE_IO |
| #define tris_usb_bus_sense TRISCbits.TRISC2 // Input |
| #define USB_BUS_SENSE 1 |
| //Uncomment this to make the output HEX of this project |
| // to be able to be bootloaded using the HID bootloader |
| #define PROGRAMMABLE_WITH_USB_HID_BOOTLOADER |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /******** Application specific definitions *************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /** Board definition ***********************************************/ |
| //These defintions will tell the main() function which board is |
| // currently selected. This will allow the application to add |
| // the correct configuration bits as wells use the correct |
| // initialization functions for the board. These defitions are only |
| // required in the stack provided demos. They are not required in |
| // final application design. |
| #define DEMO_BOARD PIC18F46J50_PIM |
| #define PIC18F46J50_PIM |
| #define CLOCK_FREQ 48000000 |
| #define GetSystemClock() CLOCK_FREQ |
| #define GetInstructionClock() GetSystemClock() |
| /** LED ************************************************************/ |
| #define mInitAllLEDs() LATE &= 0xFC; TRISE &= 0xFC; |
| #define mLED_1 LATEbits.LATE0 |
| #define mLED_2 LATEbits.LATE1 |
| #define mLED_3 mLED_1 |
| #define mLED_4 mLED_2 |
| #define mGetLED_1() mLED_1 |
| #define mGetLED_2() mLED_2 |
| #define mGetLED_3() mLED_3 |
| #define mGetLED_4() mLED_4 |
| #define mLED_1_On() mLED_1 = 1; |
| #define mLED_2_On() mLED_2 = 1; |
| #define mLED_3_On() mLED_3 = 1; |
| #define mLED_4_On() mLED_4 = 1; |
| #define mLED_1_Off() mLED_1 = 0; |
| #define mLED_2_Off() mLED_2 = 0; |
| #define mLED_3_Off() mLED_3 = 0; |
| #define mLED_4_Off() mLED_4 = 0; |
| #define mLED_1_Toggle() mLED_1 = !mLED_1; |
| #define mLED_2_Toggle() mLED_2 = !mLED_2; |
| #define mLED_3_Toggle() mLED_3 = !mLED_3; |
| #define mLED_4_Toggle() mLED_4 = !mLED_4; |
| /** SWITCH *********************************************************/ |
| #define mInitSwitch2() TRISBbits.TRISB2=1; |
| #define mInitSwitch3() mInitSwitch2(); |
| #define mInitAllSwitches() mInitSwitch2(); |
| #define sw2 PORTBbits.RB2 |
| #define sw3 PORTBbits.RB2 |
| /** POT ************************************************************/ |
| #define mInitPOT() {TRISAbits.TRISA0=1; \ |
| ANCON0bits.PCFG0 = 0; \ |
| ADCON0=0x01; \ |
| ADCON1=0xBE;} // POT on HPC Explorer |
| #endif //HARDWARE_PROFILE_PIC18F46J50_PIM_H |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/HardwareProfile - PIC18F87J50 PIM.h |
|---|
| 0,0 → 1,150 |
| /******************************************************************** |
| FileName: HardwareProfile - PIC18F87J50 PIM.h |
| Dependencies: See INCLUDES section |
| Processor: PIC18 USB Microcontrollers |
| Hardware: PIC18F87J50 PIM |
| Compiler: Microchip C18 |
| Company: Microchip Technology, Inc. |
| Software License Agreement: |
| The software supplied herewith by Microchip Technology Incorporated |
| (the Company) for its PIC® Microcontroller is intended and |
| supplied to you, the Companys customer, for use solely and |
| exclusively on Microchip PIC Microcontroller products. The |
| software is owned by the Company and/or its supplier, and is |
| protected under applicable copyright laws. All rights are reserved. |
| Any use in violation of the foregoing restrictions may subject the |
| user to criminal sanctions under applicable laws, as well as to |
| civil liability for the breach of the terms and conditions of this |
| license. |
| THIS SOFTWARE IS PROVIDED IN AN AS IS CONDITION. NO WARRANTIES, |
| WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED |
| TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, |
| IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR |
| CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. |
| ******************************************************************** |
| File Description: |
| Change History: |
| Rev Date Description |
| 1.0 11/19/2004 Initial release |
| 2.1 02/26/2007 Updated for simplicity and to use common |
| coding style |
| 2.3 09/15/2008 Broke out each hardware platform into its own |
| "HardwareProfile - xxx.h" file |
| ********************************************************************/ |
| #ifndef HARDWARE_PROFILE_PIC18F87J50_PIM_H |
| #define HARDWARE_PROFILE_PIC18F87J50_PIM_H |
| /*******************************************************************/ |
| /******** USB stack hardware selection options *********************/ |
| /*******************************************************************/ |
| //This section is the set of definitions required by the MCHPFSUSB |
| // framework. These definitions tell the firmware what mode it is |
| // running in, and where it can find the results to some information |
| // that the stack needs. |
| //These definitions are required by every application developed with |
| // this revision of the MCHPFSUSB framework. Please review each |
| // option carefully and determine which options are desired/required |
| // for your application. |
| /** USB ************************************************************/ |
| //The PIC18F87J50 FS USB Plug-In Module supports the USE_USB_BUS_SENSE_IO |
| //feature. The USE_SELF_POWER_SENSE_IO feature is not implemented on the |
| //circuit board, so the USE_SELF_POWER_SENSE_IO define should always be |
| //commented for this hardware platform. |
| //#define USE_SELF_POWER_SENSE_IO |
| #define tris_self_power TRISAbits.TRISA2 // Input |
| #if defined(USE_SELF_POWER_SENSE_IO) |
| #define self_power PORTAbits.RA2 |
| #else |
| #define self_power 1 |
| #endif |
| //#define USE_USB_BUS_SENSE_IO //JP1 must be in R-U position to use this feature on this board |
| #define tris_usb_bus_sense TRISBbits.TRISB5 // Input |
| #if defined(USE_USB_BUS_SENSE_IO) |
| #define USB_BUS_SENSE PORTBbits.RB5 |
| #else |
| #define USB_BUS_SENSE 1 |
| #endif |
| //Uncomment this to make the output HEX of this project |
| // to be able to be bootloaded using the HID bootloader |
| #define PROGRAMMABLE_WITH_USB_HID_BOOTLOADER |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /******** Application specific definitions *************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /** Board definition ***********************************************/ |
| //These defintions will tell the main() function which board is |
| // currently selected. This will allow the application to add |
| // the correct configuration bits as wells use the correct |
| // initialization functions for the board. These defitions are only |
| // required in the stack provided demos. They are not required in |
| // final application design. |
| #define DEMO_BOARD PIC18F87J50_PIM |
| #define PIC18F87J50_PIM |
| #define CLOCK_FREQ 48000000 |
| #define GetSystemClock() CLOCK_FREQ |
| #define GetInstructionClock() CLOCK_FREQ |
| /** LED ************************************************************/ |
| #define mInitAllLEDs() {LATE &= 0xFC; TRISE &= 0xFC; LATD &= 0xF3; TRISD &= 0xF3;} |
| #define mLED_1 LATEbits.LATE0 |
| #define mLED_2 LATEbits.LATE1 |
| #define mLED_3 LATDbits.LATD2 |
| #define mLED_4 LATDbits.LATD3 |
| #define mGetLED_1() mLED_1 |
| #define mGetLED_2() mLED_2 |
| #define mGetLED_3() mLED_3 |
| #define mGetLED_4() mLED_4 |
| #define mLED_1_On() mLED_1 = 1; |
| #define mLED_2_On() mLED_2 = 1; |
| #define mLED_3_On() mLED_3 = 1; |
| #define mLED_4_On() mLED_4 = 1; |
| #define mLED_1_Off() mLED_1 = 0; |
| #define mLED_2_Off() mLED_2 = 0; |
| #define mLED_3_Off() mLED_3 = 0; |
| #define mLED_4_Off() mLED_4 = 0; |
| #define mLED_1_Toggle() mLED_1 = !mLED_1; |
| #define mLED_2_Toggle() mLED_2 = !mLED_2; |
| #define mLED_3_Toggle() mLED_3 = !mLED_3; |
| #define mLED_4_Toggle() mLED_4 = !mLED_4; |
| /** SWITCH *********************************************************/ |
| #define mInitAllSwitches() TRISBbits.TRISB4=1; |
| #define mInitSwitch2() TRISBbits.TRISB4=1; |
| #define mInitSwitch3() TRISBbits.TRISB4=1; |
| #define sw2 PORTBbits.RB4 |
| #define sw3 PORTBbits.RB4 |
| /** POT ************************************************************/ |
| #define mInitPOT() {TRISAbits.TRISA0=1; \ |
| WDTCONbits.ADSHR = 1; \ |
| ANCON0bits.PCFG0 = 1; \ |
| WDTCONbits.ADSHR = 0; \ |
| ADCON0=0x01; \ |
| ADCON1=0xBE;} // POT on HPC Explorer |
| /** I 2 C T E M P S E N S E *************************************/ |
| #define mInitI2CPins() TRISC |= 0x18; // RC3 and RC4 are I2C |
| #endif //HARDWARE_PROFILE_PIC18F87J50_PIM_H |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/HardwareProfile - PIC24F Starter Kit.h |
|---|
| 0,0 → 1,129 |
| /******************************************************************** |
| FileName: HardwareProfile - PIC24F Starter Kit.h |
| Dependencies: See INCLUDES section |
| Processor: PIC24FJ256GB106 |
| Hardware: PIC24F Starter Kit |
| Compiler: Microchip C30 |
| Company: Microchip Technology, Inc. |
| Software License Agreement: |
| The software supplied herewith by Microchip Technology Incorporated |
| (the Company) for its PIC® Microcontroller is intended and |
| supplied to you, the Companys customer, for use solely and |
| exclusively on Microchip PIC Microcontroller products. The |
| software is owned by the Company and/or its supplier, and is |
| protected under applicable copyright laws. All rights are reserved. |
| Any use in violation of the foregoing restrictions may subject the |
| user to criminal sanctions under applicable laws, as well as to |
| civil liability for the breach of the terms and conditions of this |
| license. |
| THIS SOFTWARE IS PROVIDED IN AN AS IS CONDITION. NO WARRANTIES, |
| WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED |
| TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, |
| IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR |
| CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. |
| ******************************************************************** |
| File Description: |
| Change History: |
| Rev Date Description |
| 1.0 11/19/2004 Initial release |
| 2.1 02/26/2007 Updated for simplicity and to use common |
| coding style |
| 2.3 09/15/2008 Broke out each hardware platform into its own |
| "HardwareProfile - xxx.h" file |
| ********************************************************************/ |
| #ifndef HARDWARE_PROFILE_PIC24F_STARTER_KIT_H |
| #define HARDWARE_PROFILE_PIC24F_STARTER_KIT_H |
| /*******************************************************************/ |
| /******** USB stack hardware selection options *********************/ |
| /*******************************************************************/ |
| //This section is the set of definitions required by the MCHPFSUSB |
| // framework. These definitions tell the firmware what mode it is |
| // running in, and where it can find the results to some information |
| // that the stack needs. |
| //These definitions are required by every application developed with |
| // this revision of the MCHPFSUSB framework. Please review each |
| // option carefully and determine which options are desired/required |
| // for your application. |
| //#define USE_SELF_POWER_SENSE_IO |
| #define tris_self_power TRISAbits.TRISA2 // Input |
| #define self_power 1 |
| //#define USE_USB_BUS_SENSE_IO |
| #define tris_usb_bus_sense U1OTGSTATbits.SESVD //TRISBbits.TRISB5 // Input |
| #define USB_BUS_SENSE U1OTGSTATbits.SESVD |
| //Uncomment this to make the output HEX of this project |
| // to be able to be bootloaded using the HID bootloader |
| #define PROGRAMMABLE_WITH_USB_HID_BOOTLOADER |
| //If the application is going to be used with the HID bootloader |
| // then this will provide a function for the application to |
| // enter the bootloader from the application (optional) |
| #if defined(PROGRAMMABLE_WITH_USB_HID_BOOTLOADER) |
| #define EnterBootloader() __asm__("goto 0x400") |
| #endif |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /******** Application specific definitions *************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /** Board definition ***********************************************/ |
| //These defintions will tell the main() function which board is |
| // currently selected. This will allow the application to add |
| // the correct configuration bits as wells use the correct |
| // initialization functions for the board. These defitions are only |
| // required in the stack provided demos. They are not required in |
| // final application design. |
| #define DEMO_BOARD PIC24F_STARTER_KIT |
| #define PIC24F_STARTER_KIT |
| #define CLOCK_FREQ 32000000 |
| /** LED ************************************************************/ |
| #define mInitAllLEDs() LATG &= 0xFE1F; TRISG &= 0xFE1F; LATF &= 0xFFCF; TRISF &= 0xFFCF; //G6,7,8,9 and F4,5 |
| #define mGetLED_1() (TRISG & ~0x0180?1:0) |
| #define mGetLED_2() (TRISG & ~0x0060?1:0) |
| #define mGetLED_3() (TRISF & ~0x0030?1:0) |
| #define mGetLED_4() |
| #define mLED_1_On() TRISG |= 0x0180; |
| #define mLED_2_On() TRISG |= 0x0060; |
| #define mLED_3_On() TRISF |= 0x0030; |
| #define mLED_4_On() |
| #define mLED_1_Off() TRISG &= ~0x0180; |
| #define mLED_2_Off() TRISG &= ~0x0060; |
| #define mLED_3_Off() TRISF &= ~0x0030; |
| #define mLED_4_Off() |
| #define mLED_1_Toggle() TRISG ^= 0x0180; |
| #define mLED_2_Toggle() TRISG ^= 0x0060; |
| #define mLED_3_Toggle() TRISF ^= 0x0030; |
| #define mLED_4_Toggle() |
| /** SWITCH *********************************************************/ |
| #define mInitSwitch2() TRISDbits.TRISD6=1; |
| #define mInitSwitch3() TRISDbits.TRISD7=1; |
| #define mInitAllSwitches() mInitSwitch2();mInitSwitch3(); |
| #define sw2 PORTDbits.RD6 |
| #define sw3 PORTDbits.RD7 |
| /** POT ************************************************************/ |
| #define mInitPOT() {AD1PCFGLbits.PCFG0 = 0; AD1CON2bits.VCFG = 0x0; AD1CON3bits.ADCS = 0xFF; AD1CON1bits.SSRC = 0x0; AD1CON3bits.SAMC = 0b00001; AD1CON1bits.FORM = 0b00; AD1CON2bits.SMPI = 0x0; AD1CON1bits.ADON = 1;} |
| #endif //HARDWARE_PROFILE_PIC24F_STARTER_KIT_H |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/HardwareProfile - PIC24FJ256GB110 PIM.h |
|---|
| 0,0 → 1,136 |
| /******************************************************************** |
| FileName: HardwareProfile - PIC24FJ256GB110 PIM.h |
| Dependencies: See INCLUDES section |
| Processor: PIC24FJ256GB110 |
| Hardware: PIC24FJ256GB110 PIM |
| Compiler: Microchip C30 |
| Company: Microchip Technology, Inc. |
| Software License Agreement: |
| The software supplied herewith by Microchip Technology Incorporated |
| (the Company) for its PIC® Microcontroller is intended and |
| supplied to you, the Companys customer, for use solely and |
| exclusively on Microchip PIC Microcontroller products. The |
| software is owned by the Company and/or its supplier, and is |
| protected under applicable copyright laws. All rights are reserved. |
| Any use in violation of the foregoing restrictions may subject the |
| user to criminal sanctions under applicable laws, as well as to |
| civil liability for the breach of the terms and conditions of this |
| license. |
| THIS SOFTWARE IS PROVIDED IN AN AS IS CONDITION. NO WARRANTIES, |
| WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED |
| TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, |
| IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR |
| CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. |
| ******************************************************************** |
| File Description: |
| Change History: |
| Rev Date Description |
| 1.0 11/19/2004 Initial release |
| 2.1 02/26/2007 Updated for simplicity and to use common |
| coding style |
| 2.3 09/15/2008 Broke out each hardware platform into its own |
| "HardwareProfile - xxx.h" file |
| ********************************************************************/ |
| #ifndef HARDWARE_PROFILE_PIC24FJ256GB110_PIM_H |
| #define HARDWARE_PROFILE_PIC24FJ256GB110_PIM_H |
| /*******************************************************************/ |
| /******** USB stack hardware selection options *********************/ |
| /*******************************************************************/ |
| //This section is the set of definitions required by the MCHPFSUSB |
| // framework. These definitions tell the firmware what mode it is |
| // running in, and where it can find the results to some information |
| // that the stack needs. |
| //These definitions are required by every application developed with |
| // this revision of the MCHPFSUSB framework. Please review each |
| // option carefully and determine which options are desired/required |
| // for your application. |
| //#define USE_SELF_POWER_SENSE_IO |
| #define tris_self_power TRISAbits.TRISA2 // Input |
| #define self_power 1 |
| //#define USE_USB_BUS_SENSE_IO |
| #define tris_usb_bus_sense TRISBbits.TRISB5 // Input |
| #define USB_BUS_SENSE 1 |
| //Uncomment this to make the output HEX of this project |
| // to be able to be bootloaded using the HID bootloader |
| #define PROGRAMMABLE_WITH_USB_HID_BOOTLOADER |
| //If the application is going to be used with the HID bootloader |
| // then this will provide a function for the application to |
| // enter the bootloader from the application (optional) |
| #if defined(PROGRAMMABLE_WITH_USB_HID_BOOTLOADER) |
| #define EnterBootloader() __asm__("goto 0x400") |
| #endif |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /******** Application specific definitions *************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /** Board definition ***********************************************/ |
| //These defintions will tell the main() function which board is |
| // currently selected. This will allow the application to add |
| // the correct configuration bits as wells use the correct |
| // initialization functions for the board. These defitions are only |
| // required in the stack provided demos. They are not required in |
| // final application design. |
| #define DEMO_BOARD PIC24FJ256GB110_PIM |
| #define EXPLORER_16 |
| #define PIC24FJ256GB110_PIM |
| #define CLOCK_FREQ 32000000 |
| #define GetSystemClock() CLOCK_FREQ |
| #define GetInstructionClock() GetSystemClock() |
| /** LED ************************************************************/ |
| #define mInitAllLEDs() LATA &= 0xF0; TRISA &= 0xF0; |
| #define mLED_1 LATAbits.LATA0 |
| #define mLED_2 LATAbits.LATA1 |
| #define mLED_3 LATAbits.LATA2 |
| #define mLED_4 LATAbits.LATA3 |
| #define mGetLED_1() mLED_1 |
| #define mGetLED_2() mLED_2 |
| #define mGetLED_3() mLED_3 |
| #define mGetLED_4() mLED_4 |
| #define mLED_1_On() mLED_1 = 1; |
| #define mLED_2_On() mLED_2 = 1; |
| #define mLED_3_On() mLED_3 = 1; |
| #define mLED_4_On() mLED_4 = 1; |
| #define mLED_1_Off() mLED_1 = 0; |
| #define mLED_2_Off() mLED_2 = 0; |
| #define mLED_3_Off() mLED_3 = 0; |
| #define mLED_4_Off() mLED_4 = 0; |
| #define mLED_1_Toggle() mLED_1 = !mLED_1; |
| #define mLED_2_Toggle() mLED_2 = !mLED_2; |
| #define mLED_3_Toggle() mLED_3 = !mLED_3; |
| #define mLED_4_Toggle() mLED_4 = !mLED_4; |
| /** SWITCH *********************************************************/ |
| #define mInitSwitch2() TRISDbits.TRISD6=1; |
| #define mInitSwitch3() TRISDbits.TRISD7=1; |
| #define mInitAllSwitches() mInitSwitch2();mInitSwitch3(); |
| #define sw2 PORTDbits.RD6 |
| #define sw3 PORTDbits.RD7 |
| /** POT ************************************************************/ |
| #define mInitPOT() {AD1PCFGLbits.PCFG5 = 0; AD1CON2bits.VCFG = 0x0; AD1CON3bits.ADCS = 0xFF; AD1CON1bits.SSRC = 0x0; AD1CON3bits.SAMC = 0b10000; AD1CON1bits.FORM = 0b00; AD1CON2bits.SMPI = 0x0; AD1CON1bits.ADON = 1;} |
| #endif //HARDWARE_PROFILE_PIC24FJ256GB110_PIM_H |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/HardwareProfile - PIC32MX460F512L PIM.h |
|---|
| 0,0 → 1,121 |
| /******************************************************************** |
| FileName: HardwareProfile - PIC32MX460F512L PIM.h |
| Dependencies: See INCLUDES section |
| Processor: PIC32 USB Microcontrollers |
| Hardware: PIC32MX460F512L PIM |
| Compiler: Microchip C32 (for PIC32) |
| Company: Microchip Technology, Inc. |
| Software License Agreement: |
| The software supplied herewith by Microchip Technology Incorporated |
| (the Company) for its PIC® Microcontroller is intended and |
| supplied to you, the Companys customer, for use solely and |
| exclusively on Microchip PIC Microcontroller products. The |
| software is owned by the Company and/or its supplier, and is |
| protected under applicable copyright laws. All rights are reserved. |
| Any use in violation of the foregoing restrictions may subject the |
| user to criminal sanctions under applicable laws, as well as to |
| civil liability for the breach of the terms and conditions of this |
| license. |
| THIS SOFTWARE IS PROVIDED IN AN AS IS CONDITION. NO WARRANTIES, |
| WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED |
| TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, |
| IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR |
| CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. |
| ******************************************************************** |
| File Description: |
| Change History: |
| Rev Date Description |
| 1.0 11/19/2004 Initial release |
| 2.1 02/26/2007 Updated for simplicity and to use common |
| coding style |
| 2.3 09/15/2008 Broke out each hardware platform into its own |
| "HardwareProfile - xxx.h" file |
| ********************************************************************/ |
| #ifndef HARDWARE_PROFILE_PIC32MX460F512L_PIM_H |
| #define HARDWARE_PROFILE_PIC32MX460F512L_PIM_H |
| /*******************************************************************/ |
| /******** USB stack hardware selection options *********************/ |
| /*******************************************************************/ |
| //This section is the set of definitions required by the MCHPFSUSB |
| // framework. These definitions tell the firmware what mode it is |
| // running in, and where it can find the results to some information |
| // that the stack needs. |
| //These definitions are required by every application developed with |
| // this revision of the MCHPFSUSB framework. Please review each |
| // option carefully and determine which options are desired/required |
| // for your application. |
| //#define USE_SELF_POWER_SENSE_IO |
| #define tris_self_power TRISAbits.TRISA2 // Input |
| #define self_power 1 |
| //#define USE_USB_BUS_SENSE_IO |
| #define tris_usb_bus_sense TRISBbits.TRISB5 // Input |
| #define USB_BUS_SENSE 1 |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /******** Application specific definitions *************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /** Board definition ***********************************************/ |
| //These defintions will tell the main() function which board is |
| // currently selected. This will allow the application to add |
| // the correct configuration bits as wells use the correct |
| // initialization functions for the board. These defitions are only |
| // required in the stack provided demos. They are not required in |
| // final application design. |
| #define DEMO_BOARD PIC32MX460F512L_PIM |
| #define EXPLORER_16 |
| #define PIC32MX460F512L_PIM |
| /** LED ************************************************************/ |
| #define mInitAllLEDs() LATA &= 0xFF03; TRISA &= 0xFF03; |
| #define mLED_1 LATAbits.LATA2 |
| #define mLED_2 LATAbits.LATA3 |
| #define mLED_3 LATAbits.LATA6 |
| #define mLED_4 LATAbits.LATA7 |
| #define mGetLED_1() mLED_1 |
| #define mGetLED_2() mLED_2 |
| #define mGetLED_3() mLED_3 |
| #define mGetLED_4() mLED_4 |
| #define mLED_1_On() mLED_1 = 1; |
| #define mLED_2_On() mLED_2 = 1; |
| #define mLED_3_On() mLED_3 = 1; |
| #define mLED_4_On() mLED_4 = 1; |
| #define mLED_1_Off() mLED_1 = 0; |
| #define mLED_2_Off() mLED_2 = 0; |
| #define mLED_3_Off() mLED_3 = 0; |
| #define mLED_4_Off() mLED_4 = 0; |
| #define mLED_1_Toggle() mLED_1 = !mLED_1; |
| #define mLED_2_Toggle() mLED_2 = !mLED_2; |
| #define mLED_3_Toggle() mLED_3 = !mLED_3; |
| #define mLED_4_Toggle() mLED_4 = !mLED_4; |
| /** SWITCH *********************************************************/ |
| #define mInitSwitch2() TRISDbits.TRISD6=1; |
| #define mInitSwitch3() TRISDbits.TRISD7=1; |
| #define mInitAllSwitches() mInitSwitch2();mInitSwitch3(); |
| #define sw2 PORTDbits.RD6 |
| #define sw3 PORTDbits.RD7 |
| /** POT ************************************************************/ |
| #define mInitPOT() {AD1PCFGbits.PCFG5 = 0; AD1CON2bits.VCFG = 0x0; AD1CON3bits.ADCS = 0xFF; AD1CON1bits.SSRC = 0x0; AD1CON3bits.SAMC = 0x10; AD1CON1bits.FORM = 0x0; AD1CON2bits.SMPI = 0x0; AD1CON1bits.ADON = 1;} |
| #endif //HARDWARE_PROFILE_PIC32MX460F512L_PIM_H |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/HardwareProfile - UBW.h |
|---|
| 0,0 → 1,182 |
| /******************************************************************** |
| FileName: HardwareProfile - UBW.h |
| Dependencies: See INCLUDES section |
| Processor: PIC18 USB Microcontrollers |
| Hardware: PICDEM FSUSB |
| Compiler: Microchip C18 |
| Company: Microchip Technology, Inc. |
| Software License Agreement: |
| The software supplied herewith by Microchip Technology Incorporated |
| (the Company) for its PIC® Microcontroller is intended and |
| supplied to you, the Companys customer, for use solely and |
| exclusively on Microchip PIC Microcontroller products. The |
| software is owned by the Company and/or its supplier, and is |
| protected under applicable copyright laws. All rights are reserved. |
| Any use in violation of the foregoing restrictions may subject the |
| user to criminal sanctions under applicable laws, as well as to |
| civil liability for the breach of the terms and conditions of this |
| license. |
| THIS SOFTWARE IS PROVIDED IN AN AS IS CONDITION. NO WARRANTIES, |
| WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED |
| TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, |
| IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR |
| CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. |
| ******************************************************************** |
| File Description: |
| Change History: |
| Rev Date Description |
| 1.0 11/19/2004 Initial release |
| 2.1 02/26/2007 Updated for simplicity and to use common |
| coding style |
| 2.3 09/15/2008 Broke out each hardware platform into its own |
| "HardwareProfile - xxx.h" file |
| 01/15/2009 UBW support |
| ********************************************************************/ |
| #ifndef HARDWARE_PROFILE_UBW_H |
| #define HARDWARE_PROFILE_UBW_H |
| /*******************************************************************/ |
| /******** USB stack hardware selection options *********************/ |
| /*******************************************************************/ |
| //This section is the set of definitions required by the MCHPFSUSB |
| // framework. These definitions tell the firmware what mode it is |
| // running in, and where it can find the results to some information |
| // that the stack needs. |
| //These definitions are required by every application developed with |
| // this revision of the MCHPFSUSB framework. Please review each |
| // option carefully and determine which options are desired/required |
| // for your application. |
| //The PICDEM FS USB Demo Board platform supports the USE_SELF_POWER_SENSE_IO |
| //and USE_USB_BUS_SENSE_IO features. Uncomment the below line(s) if |
| //it is desireable to use one or both of the features. |
| //#define USE_SELF_POWER_SENSE_IO |
| #define tris_self_power TRISAbits.TRISA2 // Input |
| #if defined(USE_SELF_POWER_SENSE_IO) |
| #define self_power PORTAbits.RA2 |
| #else |
| #define self_power 1 |
| #endif |
| //#define USE_USB_BUS_SENSE_IO |
| #define tris_usb_bus_sense TRISAbits.TRISA1 // Input |
| #if defined(USE_USB_BUS_SENSE_IO) |
| #define USB_BUS_SENSE PORTAbits.RA1 |
| #else |
| #define USB_BUS_SENSE 1 |
| #endif |
| //Uncomment the following line to make the output HEX of this |
| // project work with the MCHPUSB Bootloader |
| #define PROGRAMMABLE_WITH_USB_MCHPUSB_BOOTLOADER |
| //Uncomment the following line to make the output HEX of this |
| // project work with the HID Bootloader |
| //#define PROGRAMMABLE_WITH_USB_HID_BOOTLOADER |
| /*******************************************************************/ |
| /******** MDD File System selection options ************************/ |
| /*******************************************************************/ |
| #define USE_PIC18 |
| #define ERASE_BLOCK_SIZE 64 |
| #define WRITE_BLOCK_SIZE 32 |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /******** Application specific definitions *************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /** Board definition ***********************************************/ |
| //These defintions will tell the main() function which board is |
| // currently selected. This will allow the application to add |
| // the correct configuration bits as wells use the correct |
| // initialization functions for the board. These defitions are only |
| // required in the stack provided demos. They are not required in |
| // final application design. |
| #define DEMO_BOARD UBW |
| #define UBW |
| #define CLOCK_FREQ 48000000 |
| // Special UBW emu board by YAS |
| // #define YAS |
| /** LED ************************************************************/ |
| /* On UBW, LED1 = RC0, LED2 = RC1, SW = RC2 */ |
| #define mInitAllLEDs() LATC &= 0xFC; TRISC &= 0xFC; |
| #define mLED_1 LATCbits.LATC0 |
| #define mLED_2 LATCbits.LATC1 |
| #define mLED_1_On() mLED_1 = 1; |
| #define mLED_2_On() mLED_2 = 1; |
| #define mLED_1_Off() mLED_1 = 0; |
| #define mLED_2_Off() mLED_2 = 0; |
| #define mLED_1_Toggle() mLED_1 = !mLED_1; |
| #define mLED_2_Toggle() mLED_2 = !mLED_2; |
| #if defined(YAS) |
| #define RXTX LATBbits.LATB5 |
| #else |
| #define RXTX LATAbits.LATA2 |
| #endif |
| #define BPF_S0 LATAbits.LATA0 |
| #define BPF_S1 LATAbits.LATA1 |
| #if defined(YAS) |
| #define BPF_S2 LATAbits.LATA2 |
| #endif |
| #define BPF_S0_STATE PORTAbits.RA0 |
| #define BPF_S1_STATE PORTAbits.RA1 |
| #if defined(YAS) |
| #define BPF_S2_STATE PORTAbits.RA2 |
| #endif |
| #define PADDLE_DIT PORTBbits.RB6 |
| #define PADDLE_DAH PORTBbits.RB7 |
| #define LPF_0 LATAbits.LATA3 |
| #define LPF_1 LATAbits.LATA4 |
| #define LPF_2 LATAbits.LATA5 |
| #if defined(YAS) |
| #else |
| #define LPF_3 LATBbits.LATB2 |
| #define LPF_4 LATBbits.LATB3 |
| #define LPF_5 LATBbits.LATB4 |
| #define LPF_6 LATBbits.LATB5 |
| #endif |
| /** S W I T C H *****************************************************/ |
| #define mInitSwitch() TRISCbits.TRISC2 = 1; |
| #define UserSW PORTCbits.RC2 |
| #define mLED_Both_Off() {mLED_1_Off(); mLED_2_Off();} |
| #define mLED_Both_On() {mLED_1_On(); mLED_2_On();} |
| #define mLED_Only_1_On() {mLED_1_On(); mLED_2_Off();} |
| #define mLED_Only_2_On() {mLED_1_Off(); mLED_2_On();} |
| #endif //HARDWARE_PROFILE_UBW_H |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/HardwareProfile - UBW32.h |
|---|
| 0,0 → 1,203 |
| /******************************************************************** |
| FileName: HardwareProfile - PIC32MX460F512L PIM.h |
| Dependencies: See INCLUDES section |
| Processor: PIC18 or PIC24 USB Microcontrollers |
| Hardware: The code is natively intended to be used on the following |
| hardware platforms: PICDEM FS USB Demo Board, |
| PIC18F87J50 FS USB Plug-In Module, or |
| Explorer 16 + PIC24 USB PIM. The firmware may be |
| modified for use on other USB platforms by editing this |
| file (HardwareProfile.h). |
| Complier: Microchip C18 (for PIC18) or C30 (for PIC24) |
| Company: Microchip Technology, Inc. |
| Software License Agreement: |
| The software supplied herewith by Microchip Technology Incorporated |
| (the Company) for its PIC® Microcontroller is intended and |
| supplied to you, the Companys customer, for use solely and |
| exclusively on Microchip PIC Microcontroller products. The |
| software is owned by the Company and/or its supplier, and is |
| protected under applicable copyright laws. All rights are reserved. |
| Any use in violation of the foregoing restrictions may subject the |
| user to criminal sanctions under applicable laws, as well as to |
| civil liability for the breach of the terms and conditions of this |
| license. |
| THIS SOFTWARE IS PROVIDED IN AN AS IS CONDITION. NO WARRANTIES, |
| WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED |
| TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, |
| IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR |
| CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. |
| ******************************************************************** |
| File Description: |
| Change History: |
| Rev Date Description |
| 1.0 11/19/2004 Initial release |
| 2.1 02/26/2007 Updated for simplicity and to use common |
| coding style |
| ********************************************************************/ |
| #ifndef HARDWARE_PROFILE_UBW32_H |
| #define HARDWARE_PROFILE_UBW32_H |
| #include "Compiler.h" |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /******** Application specific definitions *************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /** Board definition ***********************************************/ |
| //These defintions will tell the main() function which board is |
| // currently selected. This will allow the application to add |
| // the correct configuration bits as wells use the correct |
| // initialization functions for the board. These defitions are only |
| // required in the stack provided demos. They are not required in |
| // final application design. |
| /** CPU Clock Speed Assignment *************************************/ |
| //#define RUN_AT_48MHZ |
| //#define RUN_AT_24MHZ |
| //#define RUN_AT_60MHZ |
| #define RUN_AT_80MHZ |
| // Various clock values |
| #if defined(RUN_AT_48MHZ) |
| #define GetSystemClock() 48000000UL |
| #define GetPeripheralClock() 48000000UL |
| #define GetInstructionClock() (GetSystemClock()) |
| #elif defined(RUN_AT_24MHZ) |
| #define GetSystemClock() 24000000UL |
| #define GetPeripheralClock() 24000000UL |
| #define GetInstructionClock() (GetSystemClock()) |
| #elif defined(RUN_AT_60MHZ) |
| #define GetSystemClock() (60000000ul) |
| #define GetPeripheralClock() (GetSystemClock()) |
| #define GetInstructionClock() (GetSystemClock()) |
| #elif defined(RUN_AT_80MHZ) |
| #define GetSystemClock() (80000000ul) |
| #define GetPeripheralClock() (GetSystemClock()) |
| #define GetInstructionClock() (GetSystemClock()) |
| #else |
| #error Choose a speed |
| #endif |
| #define PROGRAMMABLE_WITH_USB_HID_BOOTLOADER |
| /*******************************************************************/ |
| /******** USB stack hardware selection options *********************/ |
| /*******************************************************************/ |
| //This section is the set of definitions required by the MCHPFSUSB |
| // framework. These definitions tell the firmware what mode it is |
| // running in, and where it can find the results to some information |
| // that the stack needs. |
| //These definitions are required by every application developed with |
| // this revision of the MCHPFSUSB framework. Please review each |
| // option carefully and determine which options are desired/required |
| // for your application. |
| //#define USE_SELF_POWER_SENSE_IO |
| #define tris_self_power TRISAbits.TRISA2 // Input |
| #define self_power 1 |
| //#define USE_USB_BUS_SENSE_IO |
| #define tris_usb_bus_sense TRISBbits.TRISB5 // Input |
| #define USB_BUS_SENSE 1 |
| /*******************************************************************/ |
| /******** Device revision workarounds ******************************/ |
| /*******************************************************************/ |
| //Uncomment this definition to allow for revision B3 silicon to work |
| // with this firmware. |
| #define PIC32MX460F512L_REV_B3_WORKAROUND |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /******** Application specific definitions *************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /*******************************************************************/ |
| /** Board definition ***********************************************/ |
| //These defintions will tell the main() function which board is |
| // currently selected. This will allow the application to add |
| // the correct configuration bits as wells use the correct |
| // initialization functions for the board. These defitions are only |
| // required in the stack provided demos. They are not required in |
| // final application design. |
| #define DEMO_BOARD UBW32 |
| #define UBW32 |
| /** LED ************************************************************/ |
| #define mInitAllLEDs() LATE |= 0x000F; TRISE &= 0xFFF0; |
| #define mLED_1 LATEbits.LATE3 |
| #define mLED_2 LATEbits.LATE2 |
| #define mLED_3 LATEbits.LATE1 |
| #define mLED_4 LATEbits.LATE0 |
| #define mGetLED_1() mLED_1 |
| #define mGetLED_USB() mLED_1 |
| #define mGetLED_2() mLED_2 |
| #define mGetLED_3() mLED_3 |
| #define mGetLED_4() mLED_4 |
| #define mLED_1_On() mLED_1 = 0; |
| #define mLED_USB_On() mLED_1 = 0; |
| #define mLED_2_On() mLED_2 = 0; |
| #define mLED_3_On() mLED_3 = 0; |
| #define mLED_4_On() mLED_4 = 0; |
| #define mLED_1_Off() mLED_1 = 1; |
| #define mLED_USB_Off() mLED_1 = 1; |
| #define mLED_2_Off() mLED_2 = 1; |
| #define mLED_3_Off() mLED_3 = 1; |
| #define mLED_4_Off() mLED_4 = 1; |
| #define mLED_1_Toggle() mLED_1 = !mLED_1; |
| #define mLED_USB_Toggle() mLED_1 = !mLED_1; |
| #define mLED_2_Toggle() mLED_2 = !mLED_2; |
| #define mLED_3_Toggle() mLED_3 = !mLED_3; |
| #define mLED_4_Toggle() mLED_4 = !mLED_4; |
| #define mLED_Both_Off() {mLED_1_Off(); mLED_2_Off();} |
| /** SWITCH *********************************************************/ |
| #define mInitSwitch2() TRISEbits.TRISE7=1; |
| #define mInitSwitch3() TRISEbits.TRISE6=1; |
| #define mInitAllSwitches() mInitSwitch2();mInitSwitch3(); |
| #define swProgram PORTEbits.RE7 |
| #define swUser PORTEbits.RE6 |
| #define UserSW swUser |
| #define sw2 swUser |
| #define RXTX LATAbits.LATA2 |
| #define BPF_S0 LATAbits.LATA0 |
| #define BPF_S1 LATAbits.LATA1 |
| #define BPF_S0_STATE PORTAbits.RA0 |
| #define BPF_S1_STATE PORTAbits.RA1 |
| #define PADDLE_DIT PORTFbits.RF4 |
| #define PADDLE_DAH PORTFbits.RF5 |
| #define LPF_0 LATAbits.LATA3 |
| #define LPF_1 LATAbits.LATA4 |
| #define LPF_2 LATAbits.LATA5 |
| #define LPF_3 LATAbits.LATA6 |
| #define LPF_4 LATAbits.LATA7 |
| #define LPF_5 LATAbits.LATA9 |
| #define LPF_6 LATAbits.LATA10 |
| #endif |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/UBW-I2C.c |
|---|
| 0,0 → 1,413 |
| /** INCLUDES *******************************************************/ |
| #include "GenericTypeDefs.h" |
| #include "Compiler.h" |
| #include "HardwareProfile.h" |
| #include "USB/usb.h" |
| #include "usbavrcmd.h" |
| #include "user.h" |
| #include <math.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <ctype.h> |
| #if defined (UBW) |
| #include <delays.h> |
| #include <i2c.h> |
| #include <EEP.h> |
| #elif defined (UBW32) |
| #include <peripheral/i2c.h> |
| #include <dee_emulation/dee_emulation_pic32.h> |
| #endif |
| /******************************************************************** |
| * Section B: EP0 Buffer Space |
| *******************************************************************/ |
| extern volatile CTRL_TRF_SETUP SetupPkt; // 8-byte only |
| extern volatile BYTE CtrlTrfData[USB_EP0_BUFF_SIZE]; |
| #pragma udata |
| WORD_VAL FilterCrossOver[8]; |
| float FilterSwitchOver[7]; |
| WORD_VAL LPFCrossOver[8]; |
| float LPFSwitchOver[7]; |
| #pragma code |
| void USBCheckUBWRequest(void) |
| { |
| unsigned char paddle_byte; |
| unsigned int eep_adr; |
| WORD_VAL w; |
| unsigned int i, j; |
| unsigned char IO_data; |
| #if defined (UBW32) |
| unsigned int value; |
| unsigned int number_of_filter_bytes; |
| #else |
| unsigned char number_of_filter_bytes; |
| #endif |
| if(SetupPkt.RequestType == USB_SETUP_TYPE_STANDARD_BITFIELD) return; // only deals with non-standard, ie user requests |
| command = SetupPkt.bRequest; // save the command of the user request from the setuppacket |
| // it will be used for subsequent data transfer |
| switch(command) |
| { |
| case CMD_GET_CW_KEY: |
| paddle_byte = 0x22; // 00100010 |
| if (!PADDLE_DIT) paddle_byte &= 0xdf; // 11011111 |
| if (!PADDLE_DAH) paddle_byte &= 0xfd; // 11111101 |
| if (RXTX) paddle_byte |= 0x10; // PB4 is the ATTINY PTT_OUT pin 00010000 |
| else paddle_byte &= 0xef; // 11101111 |
| replybuf[0] = paddle_byte; |
| inPipes[0].pSrc.bRam = (BYTE*)&replybuf[0]; // Set Source |
| inPipes[0].info.bits.ctrl_trf_mem = USB_EP0_RAM; // Set memory type |
| inPipes[0].wCount.v[0] = 1; // Set data count |
| inPipes[0].info.bits.busy = 1; |
| break; |
| case CMD_SET_USRP1: // Set RxTx and get Paddle status |
| paddle_byte = 0x22; // 00100010 |
| if ( SetupPkt.W_Value.v[0] ){ |
| RXTX = 1; // Set PTT |
| paddle_byte |= 0x10; // 00010000 |
| } |
| else{ |
| RXTX = 0; |
| paddle_byte &= 0xef; // 11101111 |
| }; |
| if (!PADDLE_DIT) paddle_byte &= 0xdf; // 11011111 |
| if (!PADDLE_DAH) paddle_byte &= 0xfd; // 11111101 |
| replybuf[0] = paddle_byte; |
| inPipes[0].pSrc.bRam = (BYTE*)&replybuf[0]; // Set Source |
| inPipes[0].info.bits.ctrl_trf_mem = USB_EP0_RAM; // Set memory type |
| inPipes[0].wCount.v[0] = 1; // Set data count |
| inPipes[0].info.bits.busy = 1; |
| break; |
| case CMD_SET_FREQ_REG: // Control Transfer Rx of data from HOST->UBW |
| case CMD_SET_LO_SM: |
| case CMD_SET_FREQ: |
| case CMD_SET_XTAL: |
| case CMD_SET_STARTUP: |
| case CMD_SET_PPM: |
| wCount = SetupPkt.wLength; |
| outPipes[0].wCount.Val = SetupPkt.wLength; |
| outPipes[0].pFunc = &Read_Command_Into_Buffer; |
| outPipes[0].pDst.bRam = (BYTE*) &command_buffer[current_command_in].data[0]; |
| outPipes[0].info.bits.busy = 1; |
| break; |
| case CMD_GET_PIN: // read ports |
| IO_data = 0x0d; // 00001101 |
| if (PADDLE_DAH) IO_data |= 0x02; // PB1 |
| if (BPF_S0_STATE) IO_data |= 0x10; // PB4 |
| if (BPF_S1_STATE) IO_data |= 0x20; // PB5 |
| replybuf[0] = IO_data; |
| inPipes[0].pSrc.bRam = (BYTE*)&replybuf[0]; // Set Source |
| inPipes[0].info.bits.ctrl_trf_mem = USB_EP0_RAM; // Set memory type |
| inPipes[0].wCount.v[0] = 1; // Set data count |
| inPipes[0].info.bits.busy = 1; |
| break; |
| case CMD_SET_PORT: // set ports |
| IO_data = SetupPkt.W_Value.v[0]; |
| if (!abpf_flag){ |
| if (IO_data & 0x10) BPF_S0 = 1; |
| else BPF_S0 = 0; |
| if (IO_data & 0x20) BPF_S1 = 1; |
| else BPF_S1 = 0; |
| }; |
| break; |
| case CMD_SET_IO: // set i/o bits |
| IO_data = SetupPkt.W_Index.v[0] & 0x03; // only 2 bits active 00000011 |
| if (!abpf_flag) { // abpf inactive |
| if (IO_data & 0x01) BPF_S0 = 1; // Simulate IO_PIN1 in ATTINY |
| else BPF_S0 = 0; |
| if (IO_data & 0x02) BPF_S1 = 1; // Simulate IO_PIN2 in ATTINY |
| else BPF_S1 = 0; |
| } |
| IO_data = BPF_S0_STATE; // read back status of BPF select pins |
| if (BPF_S1_STATE) IO_data |= 0x02; |
| else IO_data &= 0x01; |
| replybuf[0] = IO_data; |
| replybuf[1] = 0x00; |
| inPipes[0].pSrc.bRam = (BYTE*)&replybuf[0]; // Set Source |
| inPipes[0].info.bits.ctrl_trf_mem = USB_EP0_RAM; // Set memory type |
| inPipes[0].wCount.v[0] = 2; // Set data count |
| inPipes[0].info.bits.busy = 1; |
| break; |
| case CMD_GET_IO: |
| IO_data = BPF_S0_STATE; // status of BPF select pins |
| if (BPF_S1_STATE) IO_data |= 0x02; |
| else IO_data &= 0x01; |
| replybuf[0] = IO_data; |
| replybuf[1] = 0x00; |
| inPipes[0].pSrc.bRam = (BYTE*)&replybuf[0]; // Set Source |
| inPipes[0].info.bits.ctrl_trf_mem = USB_EP0_RAM; // Set memory type |
| inPipes[0].wCount.v[0] = 2; // Set data count |
| inPipes[0].info.bits.busy = 1; |
| break; |
| case CMD_SET_FILTER: // Set and Read filter crossover points |
| i = SetupPkt.W_Index.Val; |
| if (i < 256){ // Rx Filter |
| number_of_filter_bytes = NUM_BPF * 2; |
| inPipes[0].pSrc.bRam = (BYTE*)&FilterCrossOver[0]; // Set source |
| if (i < NUM_BPF) { |
| FilterCrossOver[i].Val = SetupPkt.W_Value.Val; |
| if (i != (NUM_BPF-1)) FilterSwitchOver[i] = Cross2Switch(FilterCrossOver[i]); |
| else abpf_flag = SetupPkt.W_Value.Val; |
| } |
| } |
| else{ // Tx filter |
| number_of_filter_bytes = 16; |
| inPipes[0].pSrc.bRam = (BYTE*)&LPFCrossOver[0]; // Set source |
| j = i - 256; |
| if ( j < 8){ |
| LPFCrossOver[j].Val = SetupPkt.W_Value.Val; |
| if (j != 7) LPFSwitchOver[j] = Cross2Switch(LPFCrossOver[j]); |
| }; |
| }; |
| // now that a filter value of filter enable/disable value is set, update the EEPROM |
| #if defined (UBW) |
| for (i = 0; i < NUM_BPF; i++){ |
| Write_b_eep((i * 2 + F_CROSS_OVER +1), FilterCrossOver[i].v[0]); |
| Busy_eep(); |
| Write_b_eep((i * 2 + F_CROSS_OVER + 1 + 1), FilterCrossOver[i].v[1]); |
| Busy_eep(); |
| } |
| #elif defined (UBW32) |
| for (i =0; i < NUM_BPF; i++) DataEEWrite( FilterCrossOver[i].Val , (i + F_CROSS_OVER +1)); |
| #endif |
| #if defined (UBW) |
| for (j = 0; j < 8; j++){ |
| Write_b_eep(( j * 2 + F_CROSS_OVER +17), LPFCrossOver[j].v[0]); |
| Busy_eep(); |
| Write_b_eep(( j * 2 + F_CROSS_OVER +17 + 1), LPFCrossOver[j].v[1]); |
| Busy_eep(); |
| } |
| Write_b_eep(F_CROSS_OVER, F_CROSS_OVER_VALUE); |
| Busy_eep(); |
| #elif defined (UBW32) |
| for (j = 0; j < 8; j++){ |
| DataEEWrite( (unsigned int)LPFCrossOver[j].Val , (j + F_CROSS_OVER +9)); |
| }; |
| DataEEWrite(F_CROSS_OVER_VALUE, F_CROSS_OVER); |
| #endif |
| inPipes[0].wCount.v[0] = number_of_filter_bytes; // Set data count |
| inPipes[0].info.bits.ctrl_trf_mem = USB_EP0_RAM; // Set memory type |
| inPipes[0].info.bits.busy = 1; |
| break; |
| case CMD_SET_SI570: // SI570: write byte from register index |
| i2c_adr = SetupPkt.W_Value.v[0]; |
| #if defined (UBW) |
| IdleI2C(); |
| StartI2C(); |
| IdleI2C(); |
| WriteI2C( i2c_adr <<1); |
| WriteI2C( SetupPkt.W_Value.v[1]); // register = byte 3 |
| WriteI2C( SetupPkt.W_Index.v[0]); // value to write to register |
| StopI2C(); |
| IdleI2C(); |
| #elif defined (UBW32) |
| IdleI2C1(); |
| StartI2C1(); |
| IdleI2C1(); |
| MasterWriteI2C1( i2c_adr <<1); |
| MasterWriteI2C1( SetupPkt.W_Value.v[1]); // register = byte 3 |
| MasterWriteI2C1( SetupPkt.W_Index.v[0]); // value to write to register |
| StopI2C1(); |
| IdleI2C1(); |
| #endif |
| replybuf[0] = 0; // just say no errors |
| inPipes[0].pSrc.bRam = (BYTE*)&replybuf[0]; // Set Source |
| inPipes[0].info.bits.ctrl_trf_mem = USB_EP0_RAM; // Set memory type |
| inPipes[0].wCount.v[0] = 1; // Set data count |
| inPipes[0].info.bits.busy = 1; |
| break; |
| case CMD_GET_LO_SM: // return sub mul |
| for (i=0; i<4; i++) replybuf[i] = f_sub.bytes[i]; |
| for (i=0; i<4; i++) replybuf[i+4] = f_mul.bytes[i]; |
| inPipes[0].pSrc.bRam = (BYTE*)&replybuf[0]; // Set Source |
| inPipes[0].info.bits.ctrl_trf_mem = USB_EP0_RAM; // Set memory type |
| inPipes[0].wCount.v[0] = 8; // Set data count |
| inPipes[0].info.bits.busy = 1; |
| break; |
| case CMD_GET_FREQ: // return set freq, ie no offset/mul |
| avr_freq.qw = set_frequency * (double)(1L << 21); |
| inPipes[0].pSrc.bRam = (BYTE*)&avr_freq.bytes[0]; // Set Source |
| inPipes[0].info.bits.ctrl_trf_mem = USB_EP0_RAM; // Set memory type |
| inPipes[0].wCount.v[0] = 4; // Set data count |
| inPipes[0].info.bits.busy = 1; |
| break; |
| case CMD_GET_PPM: // return smooth tune in ppm |
| w.Val = Smooth_double * 1000000L; |
| inPipes[0].pSrc.bRam = (BYTE*)&w.v[0]; // Set Source |
| inPipes[0].info.bits.ctrl_trf_mem = USB_EP0_RAM; // Set memory type |
| inPipes[0].wCount.v[0] = 2; // Set data count |
| inPipes[0].info.bits.busy = 1; |
| break; |
| case CMD_GET_STARTUP: // return init startup freq |
| #if defined(UBW) |
| for (i=0; i<4; i++) avr_freq.bytes[i] = Read_b_eep(i + F_INIT_FREQ +1); |
| #elif defined(UBW32) |
| for (i=0; i<4; i++) { |
| DataEERead(&value, (i + F_INIT_FREQ +1)); |
| avr_freq.bytes[i] = value; |
| }; |
| #endif |
| inPipes[0].pSrc.bRam = (BYTE*)&avr_freq.bytes[0]; // Set Source |
| inPipes[0].info.bits.ctrl_trf_mem = USB_EP0_RAM; // Set memory type |
| inPipes[0].wCount.v[0] = 4; // Set data count |
| inPipes[0].info.bits.busy = 1; |
| break; |
| case CMD_GET_XTAL: // return fcryst |
| inPipes[0].pSrc.bRam = (BYTE*)&fcryst_freq.bytes[0]; // Set Source |
| inPipes[0].info.bits.ctrl_trf_mem = USB_EP0_RAM; // Set memory type |
| inPipes[0].wCount.v[0] = 4; // Set data count |
| inPipes[0].info.bits.busy = 1; |
| break; |
| case CMD_GET_SI570: // SI570: read out frequency control registers |
| i2c_adr = SetupPkt.W_Value.v[0]; |
| ReadRegs(); |
| inPipes[0].pSrc.bRam = (BYTE*)®isters[0]; // Set Source |
| inPipes[0].info.bits.ctrl_trf_mem = USB_EP0_RAM; // Set memory type |
| inPipes[0].wCount.v[0] = 6; // Set data count |
| inPipes[0].info.bits.busy = 1; |
| break; |
| case CMD_GET_I2C_ERR: // return # of i2c errors, set to zero always |
| replybuf[0] = 0; // No errors :) |
| inPipes[0].pSrc.bRam = (BYTE*)&replybuf[0]; // Set Source |
| inPipes[0].info.bits.ctrl_trf_mem = USB_EP0_RAM; // Set memory type |
| inPipes[0].wCount.v[0] = 1; // Set data count |
| inPipes[0].info.bits.busy = 1; |
| break; |
| case CMD_SET_I2C_ADDR: // Reset EEPROM to default values if 255 |
| // Otherwise just set i2c address |
| if (SetupPkt.W_Value.v[0] == 0xff){ |
| #if defined (UBW) |
| Write_b_eep(F_CAL_DONE, 0xff); |
| Busy_eep(); |
| Write_b_eep(F_INIT_FREQ, 0xff); |
| Busy_eep(); |
| Write_b_eep(F_SMOOTH, 0xff); |
| Busy_eep(); |
| Write_b_eep(F_SUB_MUL, 0xff); |
| Busy_eep(); |
| Write_b_eep(F_CROSS_OVER, 0xff); |
| Busy_eep(); |
| #elif defined (UBW32) |
| DataEEWrite( (unsigned int) 0xff, F_CAL_DONE); |
| DataEEWrite( (unsigned int) 0xff, F_INIT_FREQ); |
| DataEEWrite( (unsigned int) 0xff, F_SMOOTH); |
| DataEEWrite( (unsigned int) 0xff, F_SUB_MUL); |
| DataEEWrite( (unsigned int) 0xff, F_CROSS_OVER); |
| #endif |
| i2c_adr = 0x55; |
| } |
| else { |
| i2c_adr = SetupPkt.W_Value.v[0]; |
| }; |
| replybuf[0] = 0x00; |
| inPipes[0].pSrc.bRam = (BYTE*)&replybuf[0]; // Set Source |
| inPipes[0].info.bits.ctrl_trf_mem = USB_EP0_RAM; // Set memory type |
| inPipes[0].wCount.v[0] = 1; // Set data count |
| inPipes[0].info.bits.busy = 1; |
| break; |
| case CMD_GET_VERSION: // return version 15.10 |
| replybuf[0] = VERSION_MINOR; |
| replybuf[1] = VERSION_MAJOR; |
| inPipes[0].pSrc.bRam = (BYTE*)&replybuf[0]; // Set Source |
| inPipes[0].info.bits.ctrl_trf_mem = USB_EP0_RAM; // Set memory type |
| inPipes[0].wCount.v[0] = 2; // Set data count |
| inPipes[0].info.bits.busy = 1; |
| break; |
| default: // Command not supported |
| replybuf[0] = 0xff; |
| inPipes[0].pSrc.bRam = (BYTE*)&replybuf[0] ; // Set Source |
| inPipes[0].info.bits.ctrl_trf_mem = USB_EP0_RAM; // Set memory type |
| inPipes[0].wCount.v[0] = 1; // Set data count |
| inPipes[0].info.bits.busy = 1; |
| break; |
| }//end switch |
| } |
| void Read_Command_Into_Buffer(void) |
| { |
| if (command_count >= COMMAND_BUFFER_SIZE){ // buffer full |
| current_command_out++; // discards oldest command |
| if (current_command_out >= COMMAND_BUFFER_SIZE) current_command_out = 0; |
| command_count--; // now one command less (discarded) |
| }; |
| command_buffer[current_command_in].command = command; |
| command_buffer[current_command_in].wCount = wCount; |
| // data already copied to command_buffer before this outpipe pFunc is called |
| current_command_in++; |
| if (current_command_in >= COMMAND_BUFFER_SIZE) current_command_in = 0; |
| command_count++; |
| } |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/rm18f4550 - HID Bootload.lkr |
|---|
| 0,0 → 1,44 |
| // File: Application_18f4550.lkr |
| // Use this linker for the USB application that will be self programmed by the HID bootloader. |
| // The HID bootloader project itself uses the BootModified.18f4450.lkr file instead. |
| // THIS LINKER SCRIPT HAS BEEN MODIFIED... This version is intended to be used |
| // with the "PROGRAMMABLE_WITH_USB_HID_BOOTLOADER" bootloader. The HID |
| // bootloader occupies memory ranges 0x000-0xFFF. In order for the code generated |
| // by this project to work with the bootloader, the linker must not put any code |
| // in the 0x00-0xFFF address range. |
| // This linker script was originated from the 18f4550.lkr file provided by |
| // the MCC18 distribution. |
| LIBPATH . |
| FILES c018i.o |
| FILES clib.lib |
| FILES p18f4550.lib |
| CODEPAGE NAME=bootloader START=0x0 END=0xFFF PROTECTED |
| CODEPAGE NAME=vectors START=0x1000 END=0x1029 PROTECTED |
| CODEPAGE NAME=page START=0x102A END=0x7FFF |
| CODEPAGE NAME=idlocs START=0x200000 END=0x200007 PROTECTED |
| CODEPAGE NAME=config START=0x300000 END=0x30000D PROTECTED |
| CODEPAGE NAME=devid START=0x3FFFFE END=0x3FFFFF PROTECTED |
| CODEPAGE NAME=eedata START=0xF00000 END=0xF000FF PROTECTED |
| ACCESSBANK NAME=accessram START=0x0 END=0x5F |
| DATABANK NAME=gpr0 START=0x60 END=0xFF |
| DATABANK NAME=gpr1 START=0x100 END=0x1FF |
| DATABANK NAME=gpr2 START=0x200 END=0x2FF |
| DATABANK NAME=gpr3 START=0x300 END=0x3FF |
| DATABANK NAME=usb4 START=0x400 END=0x4FF PROTECTED |
| DATABANK NAME=usb5 START=0x500 END=0x5FF PROTECTED |
| DATABANK NAME=usb6 START=0x600 END=0x6FF PROTECTED |
| DATABANK NAME=usb7 START=0x700 END=0x7FF PROTECTED |
| ACCESSBANK NAME=accesssfr START=0xF60 END=0xFFF PROTECTED |
| SECTION NAME=CONFIG ROM=config |
| STACK SIZE=0x100 RAM=gpr3 |
| SECTION NAME=USB_VARS RAM=usb4 |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/rm18f4550 - MCHPUSB Bootload.lkr |
|---|
| 0,0 → 1,37 |
| // FileName: rm18f4550.lkr |
| // Sample linker command file for 18F4550 with Bootloader |
| // |
| //Change History: |
| // Rev Date Description |
| // 1.0 10/30/2004 Initial release |
| LIBPATH . |
| FILES c018i.o |
| FILES clib.lib |
| FILES p18f4550.lib |
| CODEPAGE NAME=boot START=0x0 END=0x7FF PROTECTED |
| CODEPAGE NAME=vectors START=0x800 END=0x0x829 PROTECTED |
| CODEPAGE NAME=page START=0x82A END=0x7FFF |
| CODEPAGE NAME=idlocs START=0x200000 END=0x200007 PROTECTED |
| CODEPAGE NAME=config START=0x300000 END=0x30000D PROTECTED |
| CODEPAGE NAME=devid START=0x3FFFFE END=0x3FFFFF PROTECTED |
| CODEPAGE NAME=eedata START=0xF00000 END=0xF000FF PROTECTED |
| ACCESSBANK NAME=accessram START=0x0 END=0x5F |
| DATABANK NAME=gpr0 START=0x60 END=0xFF |
| DATABANK NAME=gpr1 START=0x100 END=0x1FF |
| DATABANK NAME=gpr2 START=0x200 END=0x2FF |
| DATABANK NAME=gpr3 START=0x300 END=0x3FF |
| DATABANK NAME=usb4 START=0x400 END=0x4FF PROTECTED |
| DATABANK NAME=usb5 START=0x500 END=0x5FF PROTECTED |
| DATABANK NAME=usb6 START=0x600 END=0x6FF PROTECTED |
| DATABANK NAME=usb7 START=0x700 END=0x7FF PROTECTED |
| ACCESSBANK NAME=accesssfr START=0xF60 END=0xFFF PROTECTED |
| SECTION NAME=CONFIG ROM=config |
| STACK SIZE=0x100 RAM=gpr3 |
| SECTION NAME=USB_VARS RAM=usb4 |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/rm18f4550.lkr |
|---|
| 0,0 → 1,37 |
| // FileName: rm18f4550.lkr |
| // Sample linker command file for 18F4550 with Bootloader |
| // |
| //Change History: |
| // Rev Date Description |
| // 1.0 10/30/2004 Initial release |
| LIBPATH . |
| FILES c018i.o |
| FILES clib.lib |
| FILES p18f4550.lib |
| CODEPAGE NAME=boot START=0x0 END=0x7FF PROTECTED |
| CODEPAGE NAME=vectors START=0x800 END=0x0x829 PROTECTED |
| CODEPAGE NAME=page START=0x82A END=0x7FFF |
| CODEPAGE NAME=idlocs START=0x200000 END=0x200007 PROTECTED |
| CODEPAGE NAME=config START=0x300000 END=0x30000D PROTECTED |
| CODEPAGE NAME=devid START=0x3FFFFE END=0x3FFFFF PROTECTED |
| CODEPAGE NAME=eedata START=0xF00000 END=0xF000FF PROTECTED |
| ACCESSBANK NAME=accessram START=0x0 END=0x5F |
| DATABANK NAME=gpr0 START=0x60 END=0xFF |
| DATABANK NAME=gpr1 START=0x100 END=0x1FF |
| DATABANK NAME=gpr2 START=0x200 END=0x2FF |
| DATABANK NAME=gpr3 START=0x300 END=0x3FF |
| DATABANK NAME=usb4 START=0x400 END=0x4FF PROTECTED |
| DATABANK NAME=usb5 START=0x500 END=0x5FF PROTECTED |
| DATABANK NAME=usb6 START=0x600 END=0x6FF PROTECTED |
| DATABANK NAME=usb7 START=0x700 END=0x7FF PROTECTED |
| ACCESSBANK NAME=accesssfr START=0xF60 END=0xFFF PROTECTED |
| SECTION NAME=CONFIG ROM=config |
| STACK SIZE=0x100 RAM=gpr3 |
| SECTION NAME=USB_VARS RAM=usb4 |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/usb_config.h |
|---|
| 0,0 → 1,125 |
| /******************************************************************** |
| FileName: usb_config.h |
| Dependencies: Always: GenericTypeDefs.h, usb_device.h |
| Situational: usb_function_hid.h, usb_function_cdc.h, usb_function_msd.h, etc. |
| Processor: PIC18 or PIC24 USB Microcontrollers |
| Hardware: The code is natively intended to be used on the following |
| hardware platforms: PICDEM FS USB Demo Board, |
| PIC18F87J50 FS USB Plug-In Module, or |
| Explorer 16 + PIC24 USB PIM. The firmware may be |
| modified for use on other USB platforms by editing the |
| HardwareProfile.h file. |
| Complier: Microchip C18 (for PIC18) or C30 (for PIC24) |
| Company: Microchip Technology, Inc. |
| Software License Agreement: |
| The software supplied herewith by Microchip Technology Incorporated |
| (the Company) for its PIC® Microcontroller is intended and |
| supplied to you, the Companys customer, for use solely and |
| exclusively on Microchip PIC Microcontroller products. The |
| software is owned by the Company and/or its supplier, and is |
| protected under applicable copyright laws. All rights are reserved. |
| Any use in violation of the foregoing restrictions may subject the |
| user to criminal sanctions under applicable laws, as well as to |
| civil liability for the breach of the terms and conditions of this |
| license. |
| THIS SOFTWARE IS PROVIDED IN AN AS IS CONDITION. NO WARRANTIES, |
| WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED |
| TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, |
| IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR |
| CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. |
| ******************************************************************** |
| File Description: |
| Change History: |
| Rev Date Description |
| 1.0 11/19/2004 Initial release |
| 2.1 02/26/2007 Updated for simplicity and to use common |
| coding style |
| *******************************************************************/ |
| /********************************************************************* |
| * Descriptor specific type definitions are defined in: usbd.h |
| ********************************************************************/ |
| #ifndef USBCFG_H |
| #define USBCFG_H |
| /** DEFINITIONS ****************************************************/ |
| #define USB_EP0_BUFF_SIZE 8 // Valid Options: 8, 16, 32, or 64 bytes. |
| // Using larger options take more SRAM, but |
| // does not provide much advantage in most types |
| // of applications. Exceptions to this, are applications |
| // that use EP0 IN or OUT for sending large amounts of |
| // application related data. |
| #define USB_MAX_NUM_INT 1 // For tracking Alternate Setting |
| #define USB_MAX_EP_NUMBER 1 |
| //Device descriptor - if these two definitions are not defined then |
| // a ROM USB_DEVICE_DESCRIPTOR variable by the exact name of device_dsc |
| // must exist. |
| #define USB_USER_DEVICE_DESCRIPTOR &device_dsc |
| #define USB_USER_DEVICE_DESCRIPTOR_INCLUDE extern ROM USB_DEVICE_DESCRIPTOR device_dsc |
| //Configuration descriptors - if these two definitions do not exist then |
| // a ROM BYTE *ROM variable named exactly USB_CD_Ptr[] must exist. |
| #define USB_USER_CONFIG_DESCRIPTOR USB_CD_Ptr |
| #define USB_USER_CONFIG_DESCRIPTOR_INCLUDE extern ROM BYTE *ROM USB_CD_Ptr[] |
| //Make sure only one of the below "#define USB_PING_PONG_MODE" |
| //is uncommented. |
| //#define USB_PING_PONG_MODE USB_PING_PONG__NO_PING_PONG |
| #define USB_PING_PONG_MODE USB_PING_PONG__FULL_PING_PONG |
| //#define USB_PING_PONG_MODE USB_PING_PONG__EP0_OUT_ONLY |
| //#define USB_PING_PONG_MODE USB_PING_PONG__ALL_BUT_EP0 //NOTE: This mode is not supported in PIC18F4550 family rev A3 devices |
| #define USB_POLLING |
| //#define USB_INTERRUPT |
| /* Parameter definitions are defined in usb_device.h */ |
| #define USB_PULLUP_OPTION USB_PULLUP_ENABLE |
| //#define USB_PULLUP_OPTION USB_PULLUP_DISABLED |
| #define USB_TRANSCEIVER_OPTION USB_INTERNAL_TRANSCEIVER |
| //External Transceiver support is not available on all product families. Please |
| // refer to the product family datasheet for more information if this feature |
| // is available on the target processor. |
| //#define USB_TRANSCEIVER_OPTION USB_EXTERNAL_TRANSCEIVER |
| #define USB_SPEED_OPTION USB_FULL_SPEED |
| //#define USB_SPEED_OPTION USB_LOW_SPEED //(not valid option for PIC24F devices) |
| #define USB_SUPPORT_DEVICE |
| #define USB_NUM_STRING_DESCRIPTORS 4 |
| //#define USB_INTERRUPT_LEGACY_CALLBACKS |
| #define USB_ENABLE_ALL_HANDLERS |
| //#define USB_ENABLE_SUSPEND_HANDLER |
| //#define USB_ENABLE_WAKEUP_FROM_SUSPEND_HANDLER |
| //#define USB_ENABLE_SOF_HANDLER |
| //#define USB_ENABLE_ERROR_HANDLER |
| //#define USB_ENABLE_OTHER_REQUEST_HANDLER |
| //#define USB_ENABLE_SET_DESCRIPTOR_HANDLER |
| //#define USB_ENABLE_INIT_EP_HANDLER |
| //#define USB_ENABLE_EP0_DATA_HANDLER |
| //#define USB_ENABLE_TRANSFER_COMPLETE_HANDLER |
| /** DEVICE CLASS USAGE *********************************************/ |
| #define USB_USE_GEN |
| /** ENDPOINTS ALLOCATION *******************************************/ |
| /* Generic */ |
| #define USBGEN_EP_SIZE 64 |
| #define USBGEN_EP_NUM 1 |
| /** DEFINITIONS ****************************************************/ |
| #endif //USBCFG_H |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/usb_descriptors.c |
|---|
| 0,0 → 1,265 |
| /******************************************************************** |
| FileName: usb_descriptors.c |
| Dependencies: See INCLUDES section |
| Processor: PIC18 or PIC24 USB Microcontrollers |
| Hardware: The code is natively intended to be used on the following |
| hardware platforms: PICDEM FS USB Demo Board, |
| PIC18F87J50 FS USB Plug-In Module, or |
| Explorer 16 + PIC24 USB PIM. The firmware may be |
| modified for use on other USB platforms by editing the |
| HardwareProfile.h file. |
| Complier: Microchip C18 (for PIC18) or C30 (for PIC24) |
| Company: Microchip Technology, Inc. |
| Software License Agreement: |
| The software supplied herewith by Microchip Technology Incorporated |
| (the Company) for its PIC® Microcontroller is intended and |
| supplied to you, the Companys customer, for use solely and |
| exclusively on Microchip PIC Microcontroller products. The |
| software is owned by the Company and/or its supplier, and is |
| protected under applicable copyright laws. All rights are reserved. |
| Any use in violation of the foregoing restrictions may subject the |
| user to criminal sanctions under applicable laws, as well as to |
| civil liability for the breach of the terms and conditions of this |
| license. |
| THIS SOFTWARE IS PROVIDED IN AN AS IS CONDITION. NO WARRANTIES, |
| WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED |
| TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, |
| IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR |
| CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. |
| ********************************************************************* |
| -usb_descriptors.c- |
| ------------------------------------------------------------------- |
| Filling in the descriptor values in the usb_descriptors.c file: |
| ------------------------------------------------------------------- |
| [Device Descriptors] |
| The device descriptor is defined as a USB_DEVICE_DESCRIPTOR type. |
| This type is defined in usb_ch9.h Each entry into this structure |
| needs to be the correct length for the data type of the entry. |
| [Configuration Descriptors] |
| The configuration descriptor was changed in v2.x from a structure |
| to a BYTE array. Given that the configuration is now a byte array |
| each byte of multi-byte fields must be listed individually. This |
| means that for fields like the total size of the configuration where |
| the field is a 16-bit value "64,0," is the correct entry for a |
| configuration that is only 64 bytes long and not "64," which is one |
| too few bytes. |
| The configuration attribute must always have the _DEFAULT |
| definition at the minimum. Additional options can be ORed |
| to the _DEFAULT attribute. Available options are _SELF and _RWU. |
| These definitions are defined in the usb_device.h file. The |
| _SELF tells the USB host that this device is self-powered. The |
| _RWU tells the USB host that this device supports Remote Wakeup. |
| [Endpoint Descriptors] |
| Like the configuration descriptor, the endpoint descriptors were |
| changed in v2.x of the stack from a structure to a BYTE array. As |
| endpoint descriptors also has a field that are multi-byte entities, |
| please be sure to specify both bytes of the field. For example, for |
| the endpoint size an endpoint that is 64 bytes needs to have the size |
| defined as "64,0," instead of "64," |
| Take the following example: |
| // Endpoint Descriptor // |
| 0x07, //the size of this descriptor // |
| USB_DESCRIPTOR_ENDPOINT, //Endpoint Descriptor |
| _EP02_IN, //EndpointAddress |
| _INT, //Attributes |
| 0x08,0x00, //size (note: 2 bytes) |
| 0x02, //Interval |
| The first two parameters are self-explanatory. They specify the |
| length of this endpoint descriptor (7) and the descriptor type. |
| The next parameter identifies the endpoint, the definitions are |
| defined in usb_device.h and has the following naming |
| convention: |
| _EP<##>_<dir> |
| where ## is the endpoint number and dir is the direction of |
| transfer. The dir has the value of either 'OUT' or 'IN'. |
| The next parameter identifies the type of the endpoint. Available |
| options are _BULK, _INT, _ISO, and _CTRL. The _CTRL is not |
| typically used because the default control transfer endpoint is |
| not defined in the USB descriptors. When _ISO option is used, |
| addition options can be ORed to _ISO. Example: |
| _ISO|_AD|_FE |
| This describes the endpoint as an isochronous pipe with adaptive |
| and feedback attributes. See usb_device.h and the USB |
| specification for details. The next parameter defines the size of |
| the endpoint. The last parameter in the polling interval. |
| ------------------------------------------------------------------- |
| Adding a USB String |
| ------------------------------------------------------------------- |
| A string descriptor array should have the following format: |
| rom struct{byte bLength;byte bDscType;word string[size];}sdxxx={ |
| sizeof(sdxxx),DSC_STR,<text>}; |
| The above structure provides a means for the C compiler to |
| calculate the length of string descriptor sdxxx, where xxx is the |
| index number. The first two bytes of the descriptor are descriptor |
| length and type. The rest <text> are string texts which must be |
| in the unicode format. The unicode format is achieved by declaring |
| each character as a word type. The whole text string is declared |
| as a word array with the number of characters equals to <size>. |
| <size> has to be manually counted and entered into the array |
| declaration. Let's study this through an example: |
| if the string is "USB" , then the string descriptor should be: |
| (Using index 02) |
| rom struct{byte bLength;byte bDscType;word string[3];}sd002={ |
| sizeof(sd002),DSC_STR,'U','S','B'}; |
| A USB project may have multiple strings and the firmware supports |
| the management of multiple strings through a look-up table. |
| The look-up table is defined as: |
| rom const unsigned char *rom USB_SD_Ptr[]={&sd000,&sd001,&sd002}; |
| The above declaration has 3 strings, sd000, sd001, and sd002. |
| Strings can be removed or added. sd000 is a specialized string |
| descriptor. It defines the language code, usually this is |
| US English (0x0409). The index of the string must match the index |
| position of the USB_SD_Ptr array, &sd000 must be in position |
| USB_SD_Ptr[0], &sd001 must be in position USB_SD_Ptr[1] and so on. |
| The look-up table USB_SD_Ptr is used by the get string handler |
| function. |
| ------------------------------------------------------------------- |
| The look-up table scheme also applies to the configuration |
| descriptor. A USB device may have multiple configuration |
| descriptors, i.e. CFG01, CFG02, etc. To add a configuration |
| descriptor, user must implement a structure similar to CFG01. |
| The next step is to add the configuration descriptor name, i.e. |
| cfg01, cfg02,.., to the look-up table USB_CD_Ptr. USB_CD_Ptr[0] |
| is a dummy place holder since configuration 0 is the un-configured |
| state according to the definition in the USB specification. |
| ********************************************************************/ |
| /********************************************************************* |
| * Descriptor specific type definitions are defined in: |
| * usb_device.h |
| * |
| * Configuration options are defined in: |
| * usb_config.h |
| ********************************************************************/ |
| #ifndef __USB_DESCRIPTORS_C |
| #define __USB_DESCRIPTORS_C |
| /** INCLUDES *******************************************************/ |
| /* |
| #include "GenericTypeDefs.h" |
| #include "Compiler.h" |
| #include "usb_config.h" |
| #include "USB/usb_device.h" |
| */ |
| #include "./USB/usb.h" |
| /** CONSTANTS ******************************************************/ |
| #if defined(__18CXX) |
| #pragma romdata |
| #endif |
| /* Device Descriptor */ |
| ROM USB_DEVICE_DESCRIPTOR device_dsc= |
| { |
| 0x12, // Size of this descriptor in bytes |
| USB_DESCRIPTOR_DEVICE, // DEVICE descriptor type |
| 0x0200, // USB Spec Release Number in BCD format |
| 0x00, // Class Code |
| 0x00, // Subclass code |
| 0x00, // Protocol code |
| USB_EP0_BUFF_SIZE, // Max packet size for EP0, see usb_config.h |
| 0x16C0, // Vendor ID VOTI AVR USB device |
| 0x05DC, // Product ID: obdev's free PID |
| 0x0000, // Device release number in BCD format |
| 0x01, // Manufacturer string index |
| 0x02, // Product string index |
| 0x03, // Device serial number string index |
| 0x01 // Number of possible configurations |
| }; |
| /* Configuration 1 Descriptor */ |
| ROM BYTE configDescriptor1[]={ |
| /* Configuration Descriptor */ |
| 0x09,//sizeof(USB_CFG_DSC), // Size of this descriptor in bytes |
| USB_DESCRIPTOR_CONFIGURATION, // CONFIGURATION descriptor type |
| 0x20,0x00, // Total length of data for this cfg |
| 1, // Number of interfaces in this cfg |
| 1, // Index value of this configuration |
| 0, // Configuration string index |
| _DEFAULT | _SELF, // Attributes, see usb_device.h |
| 50, // Max power consumption (2X mA) |
| /* Interface Descriptor */ |
| 0x09,//sizeof(USB_INTF_DSC), // Size of this descriptor in bytes |
| USB_DESCRIPTOR_INTERFACE, // INTERFACE descriptor type |
| 0, // Interface Number |
| 0, // Alternate Setting Number |
| 2, // Number of endpoints in this intf |
| 0x00, // Class code |
| 0x00, // Subclass code |
| 0x00, // Protocol code |
| 0, // Interface string index |
| /* Endpoint Descriptor */ |
| 0x07, /*sizeof(USB_EP_DSC)*/ |
| USB_DESCRIPTOR_ENDPOINT, //Endpoint Descriptor |
| _EP01_OUT, //EndpointAddress |
| _BULK, //Attributes |
| USBGEN_EP_SIZE,0x00, //size |
| 1, //Interval |
| 0x07, /*sizeof(USB_EP_DSC)*/ |
| USB_DESCRIPTOR_ENDPOINT, //Endpoint Descriptor |
| _EP01_IN, //EndpointAddress |
| _BULK, //Attributes |
| USBGEN_EP_SIZE,0x00, //size |
| 1 //Interval |
| }; |
| //Language code string descriptor |
| ROM struct{BYTE bLength;BYTE bDscType;WORD string[1];}sd000={ |
| sizeof(sd000),USB_DESCRIPTOR_STRING,{0x0409}}; |
| //Manufacturer string descriptor |
| ROM struct{BYTE bLength;BYTE bDscType;WORD string[12];}sd001={ |
| sizeof(sd001),USB_DESCRIPTOR_STRING, |
| {'w','w','w','.','o','b','d','e','v','.', |
| 'a','t'}}; |
| //Product string descriptor |
| ROM struct{BYTE bLength;BYTE bDscType;WORD string[10];}sd002={ |
| sizeof(sd002),USB_DESCRIPTOR_STRING, |
| {'D','G','8','S','A','Q','-','I','2','C'}}; |
| //Serial Number string descriptor |
| ROM struct{BYTE bLength;BYTE bDscType;WORD string[9];}sd003={ |
| sizeof(sd003),USB_DESCRIPTOR_STRING, |
| {'T','F','3','L','J','-','1','.','0'}}; |
| //Array of configuration descriptors |
| ROM BYTE *ROM USB_CD_Ptr[]= |
| { |
| (ROM BYTE *ROM)&configDescriptor1 |
| }; |
| //Array of string descriptors |
| ROM BYTE *ROM USB_SD_Ptr[]= |
| { |
| (ROM BYTE *ROM)&sd000, |
| (ROM BYTE *ROM)&sd001, |
| (ROM BYTE *ROM)&sd002, |
| (ROM BYTE *ROM)&sd003 |
| }; |
| /** EOF usb_descriptors.c ***************************************************/ |
| #endif |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/usbavrcmd.h |
|---|
| 0,0 → 1,87 |
| //************************************************************************ |
| //** |
| //** Project......: Firmware USB AVR Si570 controler. |
| //** |
| //** Platform.....: ATtiny45 @ 16.5 MHz |
| //** |
| //** Licence......: This software is freely available for non-commercial |
| //** use - i.e. for research and experimentation only! |
| //** |
| //** Programmer...: F.W. Krom, PE0FKO |
| //** |
| //** Description..: USB commando codes |
| //** |
| //** History......: V15.12: First version |
| //** |
| //************************************************************************** |
| // |
| //#define CMD_ECHO_WORD 0x00 |
| #define CMD_GET_VERSION 0x00 |
| #define CMD_SET_DDR 0x01 |
| #define CMD_GET_PIN 0x02 |
| #define CMD_GET_PORT 0x03 |
| #define CMD_SET_PORT 0x04 |
| // 0x05 // Used in old V1.4 |
| // 0x06 // Used in old V1.4 |
| // 0x07 // Used in old V1.4 |
| // 0x08 // Used in old V1.4 |
| // 0x09 // Used in old V1.4 |
| // 0x0A // Used in old V1.4 |
| // 0x0B // Used in old V1.4 |
| // 0x0C // Used in old V1.4 |
| #define CMD_REBOOT 0x0F |
| // 0x10 // Used in old V1.4 |
| // 0x11 // Used in old V1.4 |
| #define CMD_SET_IO 0x15 |
| #define CMD_GET_IO 0x16 |
| #define CMD_SET_FILTER 0x17 |
| #define CMD_SET_RX_BAND_FILTER 0x18 // V15.12 |
| #define CMD_GET_RX_BAND_FILTER 0x19 // V15.12 |
| #define CMD_SET_TX_BAND_FILTER 0x1A // MOBO Only |
| #define CMD_GET_TX_BAND_FILTER 0x1B // MOBO Only |
| #define CMD_SET_SI570 0x20 // Write byte to Si570 register |
| // 0x21 // Used in old V1.4 |
| // 0x22 // Used in old V1.4 |
| // 0x23 // Used in old V1.4 |
| #define CMD_SET_FREQ_REG 0x30 |
| #define CMD_SET_LO_SM 0x31 |
| #define CMD_SET_FREQ 0x32 |
| #define CMD_SET_XTAL 0x33 |
| #define CMD_SET_STARTUP 0x34 |
| #define CMD_SET_PPM 0x35 |
| // 0x36 // Used in old V2.0 |
| // 0x37 // Used in old V2.0 |
| // 0x38 // Used in old V2.0 |
| #define CMD_GET_LO_SM 0x39 |
| #define CMD_GET_FREQ 0x3a |
| #define CMD_GET_PPM 0x3b |
| #define CMD_GET_STARTUP 0x3c |
| #define CMD_GET_XTAL 0x3d |
| #define CMD_GET_REGS 0x3e |
| #define CMD_GET_SI570 0x3f |
| #define CMD_GET_I2C_ERR 0x40 |
| #define CMD_SET_I2C_ADDR 0x41 |
| #define CMD_GET_CPU_TEMP 0x42 // |
| #define CMD_SET_USRP1 0x50 |
| #define CMD_GET_CW_KEY 0x51 |
| // 0x52 // Used in old V2.0 |
| // 0x53 // Used in old V2.0 |
| // 0x54 // Used in old V2.0 |
| // Mobo command's |
| #define CMD_GET_FW_FEATURE 0x60 // Firmware Feature select |
| #define CMD_GET_ADC_INPUTS 0x61 // Read analog inputs (Temp, PA current, P_out, P_ref, Vdd) |
| #define CMD_RM_PA_HIGH_TEMP 0x64 // Read/Modify the PA High Temperature limit |
| #define CMD_RM_PA_BIAS 0x65 // Read/Modify PA bias setting related values, 5 items |
| #define CMD_RM_PA_SWR 0x66 // Read/Modify SWR measurement and SWR alarm related values 4 items |
| #define CMD_RM_ROTARY 0x67 // Read/Modify Rotatry Encoder Resolution |
| #define CMD_SET_BYTE_GPIO 0x6e // Write a Byte to (PCF8584) GPIO Extender |
| #define CMD_GET_BYTE_GPIO 0x6f // Read a Byte from (PCF8584) GPIO Extender |
| // 0xEE // Used in old V2.0 |
| // 0xEF // Used in old V2.0 |
| // 0xFF // Used in old V2.0 |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/user.bak |
|---|
| 0,0 → 1,197 |
| /********************************************************************* |
| * |
| * Microchip USB C18 Firmware Version 1.2 |
| * |
| ********************************************************************* |
| * FileName: user.h |
| * Dependencies: See INCLUDES section below |
| * Processor: PIC18 |
| * Compiler: C18 3.11+ |
| * Company: Microchip Technology, Inc. |
| * |
| * Software License Agreement |
| * |
| * The software supplied herewith by Microchip Technology Incorporated |
| * (the Company) for its PICmicro® Microcontroller is intended and |
| * supplied to you, the Companys customer, for use solely and |
| * exclusively on Microchip PICmicro Microcontroller products. The |
| * software is owned by the Company and/or its supplier, and is |
| * protected under applicable copyright laws. All rights are reserved. |
| * Any use in violation of the foregoing restrictions may subject the |
| * user to criminal sanctions under applicable laws, as well as to |
| * civil liability for the breach of the terms and conditions of this |
| * license. |
| * |
| * THIS SOFTWARE IS PROVIDED IN AN AS IS CONDITION. NO WARRANTIES, |
| * WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED |
| * TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| * PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, |
| * IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR |
| * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. |
| * |
| * Author Date Comment |
| *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * Rawin Rojvanit 11/19/04 Original. |
| * Rawin Rojvanit 05/14/07 Minor updates. |
| ********************************************************************/ |
| #ifndef PICDEM_FS_DEMO_H |
| #define PICDEM_FS_DEMO_H |
| /** I N C L U D E S **********************************************************/ |
| /** D E F I N I T I O N S ****************************************************/ |
| // For custom LPF switchover points |
| #define ALEX |
| //#define K5OOR |
| //#define MARC |
| // YAS is defined in the HardwareProfile - UBW.h, if needed |
| #if defined(YAS) |
| #define NUM_BPF 8 |
| #else |
| #define NUM_BPF 4 |
| #endif |
| #define INIT_SI570_ON_STARTUP |
| #define VERSION_MAJOR 16 |
| #define VERSION_MINOR 04 |
| #define DEFAULT_I2C_ADDRESS 0x55 |
| #define PCF8574 0x39 // A2 A1 A0 -> 0 0 1 |
| #define F_CAL_DONE 0 // EEPROM position of F_CAL_DONE flag. 4 bytes follow. |
| #define F_CAL_DONE_VALUE 0x55 |
| #define DEFAULT_FCRYST 114.285 |
| //#if defined(UBW) |
| #define F_INIT_FREQ 5 // 4 bytes follow |
| //#elif defined(UBW32) |
| //#define F_INIT_FREQ 2 // fcryst 4 bytes all stored in one 32 bit slot |
| #endif |
| #define F_INIT_FREQ_VALUE 0x55 |
| #define DEFAULT_INIT_FREQ 56.32 |
| #if defined(UBW) |
| #define F_SMOOTH 10 // 2 bytes follow |
| #elif defined(UBW32) |
| #define F_SMOOTH 4 // 1 slot follow |
| #endif |
| #define F_SMOOTH_VALUE 0x55 |
| #define DEFAULT_SMOOTH 3500 // ppm |
| #define F_SUB_MUL_VALUE 0x55 |
| #define DEFAULT_SUB 0.0 |
| #define DEFAULT_MUL 1.0 |
| #if defined(UBW) |
| #define F_SUB_MUL 13 // 8 bytes follow |
| #elif defined(UBW32) |
| #define F_SUB_MUL 6 // 2 slots follow |
| #endif |
| #if defined(UBW) |
| #define F_CROSS_OVER 22 // 32 bytes follow |
| #elif defined(UBW32) |
| #define F_CROSS_OVER 9 // 16 words stored in 16 (unsigned int) slots |
| #endif |
| #define F_CROSS_OVER_VALUE 0x55 |
| #if defined(UBW) |
| #define F_BLINK_LED 55 |
| #elif defined(UBW32) |
| #define F_BLINK_LED 26 |
| #endif |
| /** S T R U C T U R E S ******************************************************/ |
| extern BYTE i2c_adr; |
| extern BYTE command; |
| extern BYTE replybuf[8]; |
| extern WORD wCount; |
| #define COMMAND_BUFFER_SIZE 16 |
| #define DATA_PACKET_SIZE 6 |
| typedef struct COMMAND_BUFFER |
| { |
| BYTE command; |
| WORD wCount; |
| BYTE data[DATA_PACKET_SIZE]; |
| } COMMAND_BUFFER_t; |
| extern COMMAND_BUFFER_t command_buffer[COMMAND_BUFFER_SIZE]; |
| extern BYTE current_command_in, current_command_out; |
| extern BYTE command_count; |
| extern double set_frequency; |
| extern unsigned char tempBuf[8]; |
| typedef union _avr_freq |
| { |
| unsigned long qw; |
| unsigned char bytes[4]; |
| } avr_freq_t; |
| extern avr_freq_t avr_freq, fcryst_freq; //frequency [MHz]*2^21 |
| // fcryst freq [MHz]*2^24 |
| extern avr_freq_t f_mul; // mul for set freq in 11.21 format |
| typedef union _offset |
| { |
| long qw; // signed offset in 11.21 format |
| unsigned char bytes[4]; |
| } offset_t; |
| extern offset_t f_sub; |
| extern unsigned char registers[6]; |
| extern BYTE abpf_flag; |
| extern double Smooth_double; |
| extern double fcryst_double; |
| extern WORD_VAL FilterCrossOver[8]; // 11.5 bit value Mhz |
| extern float FilterSwitchOver[7]; |
| extern WORD_VAL LPFCrossOver[8]; |
| extern float LPFSwitchOver[7]; |
| /** P U B L I C P R O T O T Y P E S *****************************************/ |
| void UserInit(void); |
| void ProcessIO(void); |
| void Set_Freq_Handler(void); |
| void Set_Register_Handler(void); |
| void Set_Cal_Handler(void); |
| void Set_Init_Freq_Handler(void); |
| void Set_Smooth_Handler(void); |
| void Set_Sub_Mul_Handler(void); |
| void Reset_Si570(void); |
| void Freeze (void); |
| void Unfreeze (void); |
| void Prep_rd (unsigned short); |
| void WriteBk (void); |
| void NewF (void); |
| void SetNewFreq(void); |
| void ReadRegs(void); |
| void ReadStartUpConfiguration(void); |
| void RunFreqProg(double); |
| void SetFrequency(double); |
| void Set_BPF(float); |
| void Set_LPF(float); |
| float Cross2Switch(WORD_VAL); |
| WORD_VAL Switch2Cross(float); |
| double Freq_From_Register(double); |
| void Read_Command_Into_Buffer(void); |
| void USBCheckUserRequest(void); |
| void USBCheckUBWRequest(void); |
| #endif //PICDEM_FS_DEMO_H |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/user.c |
|---|
| 0,0 → 1,1278 |
| /******************************************************************** |
| FileName: user.c |
| Dependencies: See INCLUDES section |
| Processor: PIC18 or PIC24 USB Microcontrollers |
| Hardware: The code is natively intended to be used on the following |
| hardware platforms: PICDEM FS USB Demo Board, |
| PIC18F87J50 FS USB Plug-In Module, or |
| Explorer 16 + PIC24 USB PIM. The firmware may be |
| modified for use on other USB platforms by editing the |
| HardwareProfile.h file. |
| Complier: Microchip C18 (for PIC18) or C30 (for PIC24) |
| * Company: Microchip Technology, Inc. |
| * |
| * Software License Agreement |
| The software supplied herewith by Microchip Technology Incorporated |
| (the Company) for its PIC® Microcontroller is intended and |
| supplied to you, the Companys customer, for use solely and |
| exclusively on Microchip PIC Microcontroller products. The |
| software is owned by the Company and/or its supplier, and is |
| protected under applicable copyright laws. All rights are reserved. |
| * Any use in violation of the foregoing restrictions may subject the |
| * user to criminal sanctions under applicable laws, as well as to |
| * civil liability for the breach of the terms and conditions of this |
| * license. |
| * |
| * THIS SOFTWARE IS PROVIDED IN AN AS IS CONDITION. NO WARRANTIES, |
| * WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED |
| * TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| * PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, |
| * IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR |
| CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. |
| ******************************************************************** |
| File Description: |
| Change History: |
| Rev Date Description |
| 1.0 11/19/2004 Initial release |
| 2.1 02/26/2007 Updated for simplicity and to use common |
| coding style |
| ********************************************************************/ |
| /** INCLUDES *******************************************************/ |
| #include "usb.h" |
| #include "HardwareProfile.h" |
| #include "user.h" |
| #include "usbavrcmd.h" |
| #include <math.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <ctype.h> |
| #if defined(__18CXX) |
| #include <delays.h> |
| #include <i2c.h> |
| #include <eep.h> |
| #elif defined(__PIC32MX__) |
| #include <peripheral/i2c.h> |
| #include <dee_emulation/dee_emulation_pic32.h> |
| #endif |
| #if defined (UBW) |
| #pragma romdata dataEEPROM=0xF00000 |
| // F_CAL_DONE, 4 bytes cal data, F_INIT_FREQ, 4 bytes freq, F_SMOOTH, 2 bytes |
| // F_SUB_MUL, 4 bytes sub and 4 bytes mul |
| // F_CROSS_OVER, 16 bytes or 8 words of 7 cross over points and 1 flag for BPF |
| // followed by 16 bytes or 8 words of 7 cross over points and 1 flag for LPF |
| // F_BLINK_LED, 1 byte boolean |
| rom unsigned char init_data[] = {0xff, 0,0,0,0, 0xff, 0,0,0,0, 0xff, 0,0, |
| 0xff, 0,0,0,0,0,0,0,0, |
| 0xff, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, |
| 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, |
| TRUE}; |
| #endif |
| /** V A R I A B L E S ********************************************************/ |
| #pragma udata |
| BYTE old_SW; |
| BYTE i2c_adr; |
| BYTE command; |
| BYTE replybuf[8]; |
| WORD wCount; |
| BYTE abpf_flag; |
| COMMAND_BUFFER_t command_buffer[COMMAND_BUFFER_SIZE]; |
| BYTE current_command_in, current_command_out; |
| BYTE command_count; |
| avr_freq_t avr_freq, fcryst_freq; // avr freq [MHz]*2^21 |
| // fcryst freq [Mhz]*2^24 |
| unsigned short R137, R135 = 0; |
| unsigned char registers[6]; |
| unsigned char tempBuf[8]; |
| unsigned char counter; |
| double delta_rfreq; |
| double rfreq, Old_rfreq; |
| double fcryst_double, Old_freq_double, Smooth_double; |
| double set_frequency; |
| avr_freq_t f_mul; |
| offset_t f_sub; |
| unsigned char validCombo; |
| #if defined(__18F14K50) || defined(__18F13K50) || defined(__18LF14K50) || defined(__18LF13K50) |
| #pragma udata usbram2 |
| #elif defined(__18F2455) || defined(__18F2550) || defined(__18F4455) || defined(__18F4550)\ |
| || defined(__18F4450) || defined(__18F2450)\ |
| || defined(__18F2458) || defined(__18F2453) || defined(__18F4558) || defined(__18F4553) |
| #pragma udata USB_VARIABLES=0x500 |
| #else |
| #pragma udata |
| #endif |
| #pragma udata |
| BOOL blinkStatusValid = TRUE; |
| /** P R I V A T E P R O T O T Y P E S ***************************************/ |
| void BlinkUSBStatus(void); |
| BOOL SwitchIsPressed(void); |
| void ServiceRequests(void); |
| /** D E C L A R A T I O N S **************************************************/ |
| #pragma code |
| float Cross2Switch(WORD_VAL val){ // convert from 11.5 bit format in [Mhz] |
| float whole, fraction; |
| whole = (float) (val.Val >> 5); |
| fraction = ((float) (val.Val & 0x001f)) / 32.0; |
| return (whole + fraction); |
| } |
| WORD_VAL Switch2Cross(float val){ // convert from float to 11.5 bit format [Mhz] |
| WORD_VAL w; |
| unsigned int i; |
| i = val; |
| w.Val = i * 32.0; |
| w.Val += (val - (float) i) * 32.0; |
| return (w); |
| } |
| void UserInit(void) |
| { |
| WORD_VAL w; |
| //#if defined (UBW) |
| // unsigned char i; |
| //#elif |
| unsigned int i; |
| unsigned int value; |
| //#endif |
| #if defined(UBW) |
| // Port A - RA0 BPF_S0, RA1 BPF_S1, RA2 RXTX, RA3-5 LPF0-2 |
| LATA = 0x00; |
| TRISA = 0x00; // 00000000 |
| // Turn all analog inputs into digital inputs |
| ADCON1 = 0x0F; |
| // Turn off the ADC |
| ADCON0bits.ADON = 0; |
| CMCON = 0x07; // Comparators as digital inputs |
| // RB0-1 for i2c, RB6-7 Paddle dit/dah, RB2-5 LPF 3-6 |
| LATB = 0x00; |
| TRISB = 0xc3; // 11000011 |
| INTCON2bits.RBPU = 0; // enable RB weak internal pullup |
| // Make all of PORTC inputs |
| LATC = 0x00; |
| TRISC = 0xFF; |
| mInitAllLEDs(); |
| mInitSwitch(); |
| old_SW = UserSW; |
| #elif defined(UBW32) |
| // gO through each I/O register, setting them all to digital i/o |
| // and making none of them open drain and turning off all pullups and |
| // setting all of the latches to zero. We have PORTA through PORTG on |
| // this chip. That's 7 total. |
| LATA = 0x0000; |
| TRISA = 0x0000; |
| ODCA = 0x0000; |
| LATB = 0x0000; |
| TRISB = 0x0000; |
| ODCB = 0x0000; |
| LATC = 0x0000; |
| TRISC = 0x0000; |
| ODCC = 0x0000; |
| LATD = 0x0000; |
| TRISD = 0x0000; |
| ODCD = 0x0000; |
| LATE = 0x0000; |
| TRISE = 0x0000; |
| ODCE = 0x0000; |
| LATF = 0x0000; |
| TRISF = 0x0030; // RF4-5 paddle input |
| ODCF = 0x0000; |
| CNPUE = 0x060000; // Pull up on CNPUE17-18, corresponding to RF4-5 |
| LATG = 0x0000; |
| TRISG = 0x0000; |
| ODCG = 0x0000; |
| //Initialize all of the LED pins |
| mInitAllLEDs(); |
| mInitAllSwitches(); |
| old_SW = UserSW; |
| // Initialize Data EEPROM Emulation |
| if (DataEEInit()) { |
| mLED_4_On(); // Error occured |
| } |
| else { |
| mLED_4_Off(); |
| }; |
| #endif |
| i2c_adr = DEFAULT_I2C_ADDRESS; |
| // check for previous calibration, which sets fcryst, the actual crystal freq |
| #if defined (UBW) |
| if (Read_b_eep(F_CAL_DONE) != F_CAL_DONE_VALUE){ // cal not done before, use default |
| fcryst_freq.qw = (double) DEFAULT_FCRYST * (double) (1L << 24); // 114.285 Mhz |
| } |
| else { // cal done before, read into fcryst |
| for (i=0; i<4; i++) fcryst_freq.bytes[i] = Read_b_eep(i + F_CAL_DONE +1); |
| }; |
| #elif defined (UBW32) |
| DataEERead(&value, F_CAL_DONE); |
| if ( value != F_CAL_DONE_VALUE){ // cal not done before, use default |
| fcryst_freq.qw = (double) DEFAULT_FCRYST * (double) (1L << 24); // 114.285 Mhz |
| } |
| else { // cal done before, read into fcryst |
| DataEERead(&value, (F_CAL_DONE +1)); |
| fcryst_freq.qw = value; |
| }; |
| #endif |
| // Now that fcryst is checked, set it first so that it can be used by startup freq setting |
| fcryst_double = (double) fcryst_freq.qw / (double) (1L << 24); |
| validCombo = 1; |
| command_count = 0; |
| current_command_in = 0; |
| current_command_out = 0; |
| Old_freq_double = 0; |
| // check for previous startup freq setting |
| #if defined (UBW) |
| if (Read_b_eep(F_INIT_FREQ) != F_INIT_FREQ_VALUE){ // not set before, use default |
| avr_freq.qw = (double) DEFAULT_INIT_FREQ * (double) (1L << 21); |
| } |
| else { // startup freq set before, read into avr |
| for (i=0; i<4; i++) avr_freq.bytes[i] = Read_b_eep(i + F_INIT_FREQ +1); |
| }; |
| #elif defined (UBW32) |
| DataEERead(&value, F_INIT_FREQ); |
| if ( value != F_INIT_FREQ_VALUE){ // not set before, use default |
| avr_freq.qw = (double) DEFAULT_INIT_FREQ * (double) (1L << 21); |
| } |
| else { // set before, read |
| DataEERead(&value, (F_INIT_FREQ +1)); |
| avr_freq.qw = value; |
| }; |
| #endif |
| // check for previous smooth setting |
| #if defined (UBW) |
| if (Read_b_eep(F_SMOOTH) != F_SMOOTH_VALUE){ // not set before, use default |
| Smooth_double = (double) DEFAULT_SMOOTH / 1000000L; // in ppm |
| } |
| else { // set before, read |
| for (i=0; i<2; i++) w.v[i] = Read_b_eep(i + F_SMOOTH +1); |
| Smooth_double = (double) w.Val / 1000000L; |
| }; |
| #elif defined (UBW32) |
| DataEERead(&value, F_SMOOTH); |
| if ( value != F_SMOOTH_VALUE){ // not set before, use default |
| Smooth_double = (double) DEFAULT_SMOOTH / 1000000L; |
| } |
| else { // set before, read |
| DataEERead(&value, (F_SMOOTH +1)); |
| w.Val = value; |
| Smooth_double = (double) w.Val / 1000000L; |
| } |
| #endif |
| // check for previous sub mul setting |
| #if defined (UBW) |
| if (Read_b_eep(F_SUB_MUL) != F_SUB_MUL_VALUE){ // not set before, use default |
| f_sub.qw = (double) DEFAULT_SUB * (double) (1L << 21); |
| f_mul.qw = (double) DEFAULT_MUL * (double) (1L << 21); |
| } |
| else { // startup freq set before, read into avr |
| for (i=0; i<4; i++) f_sub.bytes[i] = Read_b_eep(i + F_SUB_MUL +1); |
| for (i=0; i<4; i++) f_mul.bytes[i] = Read_b_eep(i + F_SUB_MUL +5); |
| }; |
| #elif defined (UBW32) |
| DataEERead(&value, F_SUB_MUL); |
| if ( value != F_SUB_MUL_VALUE){ // not set before, use default |
| f_sub.qw = (double) DEFAULT_SUB * (double) (1L << 21); |
| f_mul.qw = (double) DEFAULT_MUL * (double) (1L << 21); |
| } |
| else { // set before, read |
| DataEERead(&value, (F_SUB_MUL +1)); |
| f_sub.qw = value; |
| DataEERead(&value, (F_SUB_MUL +2)); |
| f_mul.qw = value; |
| }; |
| #endif |
| // Check for Cross Over Points |
| #if defined (UBW) |
| if (Read_b_eep(F_CROSS_OVER) != F_CROSS_OVER_VALUE){ // not set before, use default |
| #if defined (YAS) |
| FilterSwitchOver[0] = (2.4 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; // default BPF switchover points |
| FilterSwitchOver[1] = (8.5 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| FilterSwitchOver[2] = (19.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| FilterSwitchOver[3] = (19.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| FilterSwitchOver[4] = (19.0 - DEFAULT_SUB) * DEFAULT_MUL* 4.0; |
| FilterSwitchOver[5] = (19.0 - DEFAULT_SUB) * DEFAULT_MUL* 4.0; |
| FilterSwitchOver[6] = (19.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| #else |
| FilterSwitchOver[0] = (2.4 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; // default BPF switchover points |
| FilterSwitchOver[1] = (8.5 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| FilterSwitchOver[2] = (19.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| #endif |
| for (i = 0; i < (NUM_BPF - 1); i++) FilterCrossOver[i] = Switch2Cross(FilterSwitchOver[i]); |
| FilterCrossOver[(NUM_BPF-1)].Val = 1; // Enabled |
| abpf_flag = 1; |
| #if defined (K5OOR) |
| LPFSwitchOver[0] = (2.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[1] = (4.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[2] = (7.45 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[3] = (15.0 - DEFAULT_SUB) * DEFAULT_MUL* 4.0; |
| LPFSwitchOver[4] = (21.5 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[5] = (30.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[6] = (30.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| #elif defined (ALEX) |
| LPFSwitchOver[0] = (2.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[1] = (4.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[2] = (9.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[3] = (11.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[4] = (14.5 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[5] = (20.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[6] = (30.0 - DEFAULT_SUB) * DEFAULT_MUL* 4.0; |
| #elif defined (MARC) |
| LPFSwitchOver[0] = (2.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[1] = (4.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[2] = (8.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[3] = (11.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[4] = (14.5 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[5] = (18.2 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[6] = (21.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| #else |
| #error "Must define an LPF configuration." |
| #endif |
| for (i = 0; i < 7; i++) LPFCrossOver[i] = Switch2Cross(LPFSwitchOver[i]); |
| LPFCrossOver[7].Val = 1; // Enabled |
| } |
| else { // set before, read |
| for (i = 0; i < NUM_BPF; i++){ |
| w.v[0] = Read_b_eep(2 * i + F_CROSS_OVER +1); |
| w.v[1] = Read_b_eep(2 * i + 1 + F_CROSS_OVER + 1); |
| FilterCrossOver[i].Val = w.Val; |
| }; |
| abpf_flag = FilterCrossOver[(NUM_BPF-1)].v[0]; |
| for (i = 0; i < 8; i++){ |
| w.v[0] = Read_b_eep(2 * i + F_CROSS_OVER +17); |
| w.v[1] = Read_b_eep(2 * i + 1 + F_CROSS_OVER + 17); |
| LPFCrossOver[i].Val = w.Val; |
| }; |
| } |
| #elif defined (UBW32) |
| DataEERead(&value, F_CROSS_OVER); |
| if ( value != F_CROSS_OVER_VALUE){ // not set before, use default |
| FilterSwitchOver[0] = (2.4 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; // default BPF switchover points |
| FilterSwitchOver[1] = (8.5 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| FilterSwitchOver[2] = (19.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| for (i = 0; i < 3; i++) FilterCrossOver[i] = Switch2Cross(FilterSwitchOver[i]); |
| FilterCrossOver[3].Val = 1; // Enabled |
| abpf_flag = 1; |
| #if defined (K5OOR) |
| LPFSwitchOver[0] = (2.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[1] = (4.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[2] = (7.45 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[3] = (15.0 - DEFAULT_SUB) * DEFAULT_MUL* 4.0; |
| LPFSwitchOver[4] = (21.5 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[5] = (30.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[6] = (30.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| #elif defined (ALEX) |
| LPFSwitchOver[0] = (2.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[1] = (4.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[2] = (9.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[3] = (11.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[4] = (14.5 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[5] = (20.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[6] = (30.0 - DEFAULT_SUB) * DEFAULT_MUL* 4.0; |
| #elif defined (MARC) |
| LPFSwitchOver[0] = (2.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[1] = (4.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[2] = (8.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[3] = (11.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[4] = (14.5 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[5] = (18.2 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| LPFSwitchOver[6] = (21.0 - DEFAULT_SUB) * DEFAULT_MUL * 4.0; |
| #else |
| #error "Must define an LPF configuration." |
| #endif |
| for (i = 0; i < 7; i++) LPFCrossOver[i] = Switch2Cross(LPFSwitchOver[i]); |
| LPFCrossOver[7].Val = 1; // Enabled |
| } |
| else { // set before, read |
| for (i=0; i< NUM_BPF; i++) { |
| DataEERead(&value, (i + F_CROSS_OVER +1)); |
| FilterCrossOver[i].Val = value; |
| }; |
| abpf_flag = FilterCrossOver[(NUM_BPF-1)].Val; |
| for (i=0; i<8; i++) { |
| DataEERead(&value, (i + F_CROSS_OVER +9)); |
| LPFCrossOver[i].Val = value; |
| }; |
| }; |
| #endif // UBW32 |
| for (i = 0; i < (NUM_BPF-1); i++) FilterSwitchOver[i] = Cross2Switch(FilterCrossOver[i]); |
| for (i = 0; i < 7; i++) LPFSwitchOver[i] = Cross2Switch(LPFCrossOver[i]); |
| // End initialising filter switchover points |
| #if defined(UBW) |
| blinkStatusValid = Read_b_eep(F_BLINK_LED); |
| #elif defined (UBW32) |
| DataEERead(&value, F_BLINK_LED); |
| blinkStatusValid = value; |
| #endif |
| #if defined (UBW) |
| OpenI2C(MASTER, SLEW_ON);// Initialize I2C module |
| SSPADD = 48; //400kHz Baud clock(9) @16MHz |
| //100kHz Baud clock(39) @16MHz |
| #elif defined (UBW32) |
| OpenI2C1(I2C_ON, ( GetPeripheralClock() / 400000UL - 2) ); |
| #endif |
| // IF we don't reset Si570 on startup, it will not hang if Si570 not connected |
| #if defined (INIT_SI570_ON_STARTUP) |
| Reset_Si570(); |
| #endif |
| // check for previous startup freq setting, if set, then set Si570 to startup freq |
| #if defined (UBW32) |
| DataEERead(&value, F_INIT_FREQ); |
| if ( value == F_INIT_FREQ_VALUE){ |
| #else |
| if (Read_b_eep(F_INIT_FREQ) == F_INIT_FREQ_VALUE){ |
| #endif |
| // avr_freq has been setup by the reading of the startup freq |
| set_frequency = (double) avr_freq.qw / (double)(1L << 21); |
| SetFrequency(set_frequency); |
| }; |
| }//end UserInit |
| /****************************************************************************** |
| * Function: void ProcessIO(void) |
| * |
| * PreCondition: None |
| * |
| * Input: None |
| * |
| * Output: None |
| * |
| * Side Effects: None |
| * |
| * Overview: This function is a place holder for other user routines. |
| * It is a mixture of both USB and non-USB tasks. |
| * |
| * Note: None |
| *****************************************************************************/ |
| void ProcessIO(void) |
| { |
| if (SwitchIsPressed()){ |
| blinkStatusValid = !blinkStatusValid; // toggle blink led |
| #if defined(UBW) |
| Write_b_eep(F_BLINK_LED, blinkStatusValid); |
| #elif defined(UBW32) |
| DataEEWrite(blinkStatusValid, F_BLINK_LED); |
| #endif |
| }; |
| //Blink the LEDs according to the USB device status |
| if(blinkStatusValid) BlinkUSBStatus(); |
| else mLED_Both_Off(); |
| // User Application USB tasks |
| if((USBDeviceState < ADDRESS_STATE)||(USBSuspendControl==1)) return; |
| //respond to any USB commands that might have come over the bus |
| ServiceRequests(); |
| }//end ProcessIO |
| /****************************************************************************** |
| * Function: void ServiceRequests(void) |
| * |
| * PreCondition: None |
| * |
| * Input: None |
| * |
| * Output: None |
| * |
| * Side Effects: USB traffic can be generated |
| * |
| * Overview: This function takes in the commands from the PC from the |
| * application and executes the commands requested |
| * |
| * Note: None |
| *****************************************************************************/ |
| void ServiceRequests(void) |
| { |
| BYTE command_to_process; |
| if (command_count > 0) { // there is command in buffer |
| command_to_process = command_buffer[current_command_out].command; |
| switch (command_to_process){ |
| case CMD_SET_FREQ_REG: |
| Set_Register_Handler(); |
| break; |
| case CMD_SET_LO_SM: |
| Set_Sub_Mul_Handler(); |
| break; |
| case CMD_SET_FREQ: |
| Set_Freq_Handler(); |
| break; |
| case CMD_SET_XTAL: |
| Set_Cal_Handler(); |
| break; |
| case CMD_SET_STARTUP: |
| Set_Init_Freq_Handler(); |
| break; |
| case CMD_SET_PPM: |
| Set_Smooth_Handler(); |
| break; |
| }; |
| // end switch |
| current_command_out++; |
| if (current_command_out >= COMMAND_BUFFER_SIZE) current_command_out = 0; |
| command_count--; |
| } // end command_count > 0 |
| }//end ServiceRequests |
| /******************************************************************** |
| * Function: void BlinkUSBStatus(void) |
| * |
| * PreCondition: None |
| * |
| * Input: None |
| * |
| * Output: None |
| * |
| * Side Effects: None |
| * |
| * Overview: BlinkUSBStatus turns on and off LEDs |
| * corresponding to the USB device state. |
| * |
| * Note: mLED macros can be found in HardwareProfile.h |
| * USBDeviceState is declared and updated in |
| * usb_device.c. |
| *******************************************************************/ |
| void BlinkUSBStatus(void) |
| { |
| static WORD led_count=0; |
| if(led_count == 0)led_count = 10000U; |
| led_count--; |
| if(USBSuspendControl == 1) |
| { |
| if(led_count==0) |
| { |
| mLED_1_Toggle(); |
| mLED_2 = mLED_1; |
| }//end if |
| } |
| else |
| { |
| if(USBDeviceState == DETACHED_STATE) |
| { |
| mLED_1_Off(); mLED_2_Off(); |
| } |
| else if(USBDeviceState == ATTACHED_STATE) |
| { |
| mLED_1_On(); mLED_2_On(); |
| } |
| else if(USBDeviceState == POWERED_STATE) |
| { |
| mLED_1_On(); mLED_2_Off(); |
| } |
| else if(USBDeviceState == DEFAULT_STATE) |
| { |
| mLED_1_Off(); mLED_2_On(); |
| } |
| else if(USBDeviceState == ADDRESS_STATE) |
| { |
| if(led_count == 0) |
| { |
| mLED_1_Toggle(); |
| mLED_2_Off(); |
| }//end if |
| } |
| else if(USBDeviceState == CONFIGURED_STATE) |
| { |
| if(led_count==0) |
| { |
| mLED_1_Toggle(); |
| mLED_2 = !mLED_1; |
| }//end if |
| }//end if(...) |
| }//end if(UCONbits.SUSPND...) |
| }//end BlinkUSBStatus |
| /****************************************************************************** |
| * Function: BOOL SwitchIsPressed(void) |
| * |
| * PreCondition: None |
| * |
| * Input: None |
| * |
| * Output: BOOL - TRUE if the SW2 was pressed and FALSE otherwise |
| * |
| * Side Effects: None |
| * |
| * Overview: returns TRUE if the SW2 was pressed and FALSE otherwise |
| * |
| * Note: None |
| *****************************************************************************/ |
| BOOL SwitchIsPressed(void) |
| { |
| if(UserSW != old_SW) |
| { |
| old_SW = UserSW; // Save new value |
| if(UserSW == 0) // If pressed |
| return TRUE; // Was pressed |
| }//end if |
| return FALSE; // Was not pressed |
| }//end SwitchIsPressed |
| void Reset_Si570() |
| { |
| #if defined (UBW) |
| StartI2C(); //Reset Si570 to Startup |
| IdleI2C(); |
| WriteI2C(i2c_adr << 1); |
| WriteI2C(135); //REG 135 |
| WriteI2C(0x01); // reset |
| StopI2C(); |
| IdleI2C(); |
| #elif defined (UBW32) |
| StartI2C1(); //Reset Si570 to Startup |
| IdleI2C1(); |
| MasterWriteI2C1(i2c_adr << 1); |
| MasterWriteI2C1(135); //REG 135 |
| MasterWriteI2C1(0x01); // reset |
| StopI2C1(); |
| IdleI2C1(); |
| #endif |
| } |
| void ReadRegs() |
| { |
| unsigned int i; |
| for(i=0;i<6;i++) |
| { |
| #if defined (UBW) |
| StartI2C(); |
| IdleI2C(); |
| WriteI2C(i2c_adr << 1); |
| WriteI2C(i+7); //specify register |
| RestartI2C(); |
| IdleI2C(); |
| WriteI2C(i2c_adr << 1 | 0x01); |
| registers[i] = ReadI2C(); |
| StopI2C(); |
| IdleI2C(); |
| #elif defined (UBW32) |
| StartI2C1(); |
| IdleI2C1(); |
| MasterWriteI2C1(i2c_adr << 1); |
| MasterWriteI2C1(i+7); |
| RestartI2C1(); |
| IdleI2C1(); |
| MasterWriteI2C1(i2c_adr << 1 | 0x01); |
| registers[i] = MasterReadI2C1(); |
| StopI2C1(); |
| IdleI2C1(); |
| #endif |
| } |
| } |
| void Freeze () { |
| Prep_rd(137); //get current value |
| #if defined (UBW) |
| R137 = ReadI2C(); |
| #elif defined (UBW32) |
| R137 = MasterReadI2C1(); |
| #endif |
| R137 = R137 | 0x10; //turn on freeze |
| WriteBk(); |
| } |
| void Unfreeze () { |
| Prep_rd(137); |
| #if defined (UBW) |
| R137 = ReadI2C(); |
| #elif defined (UBW32) |
| R137 = MasterReadI2C1(); |
| #endif |
| R137 = R137 & 0xEF; |
| WriteBk(); |
| } |
| void WriteBk () { //Write back |
| #if defined (UBW) |
| StopI2C(); |
| IdleI2C(); |
| StartI2C(); |
| IdleI2C(); |
| WriteI2C(i2c_adr<<1); |
| WriteI2C(137); //REG |
| WriteI2C(R137); // new data |
| StopI2C(); |
| IdleI2C(); |
| #elif defined (UBW32) |
| StopI2C1(); |
| IdleI2C1(); |
| StartI2C1(); |
| IdleI2C1(); |
| MasterWriteI2C1(i2c_adr<<1); |
| MasterWriteI2C1(137); //REG |
| MasterWriteI2C1(R137); // new data |
| StopI2C1(); |
| IdleI2C1(); |
| #endif |
| } |
| void Prep_rd (unsigned short r) { // get ready to read |
| #if defined (UBW) |
| StartI2C(); |
| IdleI2C(); |
| WriteI2C(i2c_adr<<1); |
| WriteI2C(r); //REG |
| RestartI2C(); |
| IdleI2C(); |
| WriteI2C(i2c_adr<<1 | 0x01); |
| #elif defined (UBW32) |
| StartI2C1(); |
| IdleI2C1(); |
| MasterWriteI2C1(i2c_adr<<1); |
| MasterWriteI2C1(r); //REG |
| RestartI2C1(); |
| IdleI2C1(); |
| MasterWriteI2C1(i2c_adr<<1 | 0x01); |
| #endif |
| } |
| void NewF () { |
| Prep_rd(135); |
| #if defined (UBW) |
| R135 = ReadI2C(); |
| R135 |= 0x40; // set New Data bit |
| StopI2C(); |
| IdleI2C(); |
| StartI2C(); |
| IdleI2C(); |
| WriteI2C(i2c_adr<<1); |
| WriteI2C(135); //REG |
| WriteI2C(R135); |
| StopI2C(); |
| IdleI2C(); |
| #elif defined (UBW32) |
| R135 = MasterReadI2C1(); |
| R135 |= 0x40; // set New Data bit |
| StopI2C1(); |
| IdleI2C1(); |
| StartI2C1(); |
| IdleI2C1(); |
| MasterWriteI2C1(i2c_adr<<1); |
| MasterWriteI2C1(135); //REG |
| MasterWriteI2C1(R135); |
| StopI2C1(); |
| IdleI2C1(); |
| #endif |
| } |
| void RunFreqProg(double f) |
| { |
| double rfreq_fraction; |
| unsigned long rfreq_integer_part; |
| unsigned long rfreq_fraction_part; |
| const float FDCO_MAX = 5670; //MHz |
| const float FDCO_MIN = 4850; |
| // Register finding the lowest DCO frequenty - code from Fred |
| unsigned char xHS_DIV; |
| unsigned int xN1; |
| unsigned int xN; |
| // Registers to save the found dividers |
| unsigned char sHS_DIV=0; |
| unsigned char sN1=0; |
| unsigned int sN=0; // Total dividing |
| unsigned int N0; // Total divider needed (N1 * HS_DIV) |
| // Find the total division needed. |
| // It is always one too low (not in the case reminder is zero, reminder not used here). |
| N0 = FDCO_MIN / (float) f; |
| sN = 11*128; |
| for(xHS_DIV = 11; xHS_DIV > 3; xHS_DIV--) |
| { |
| // Skip the unavailable divider's |
| if (xHS_DIV == 8 || xHS_DIV == 10) |
| continue; |
| // Calculate the needed low speed divider |
| xN1 = N0 / xHS_DIV + 1; |
| if (xN1 > 128) |
| continue; |
| // Skip the unavailable divider's |
| if (xN1 != 1 && (xN1 & 1) == 1) |
| xN1 += 1; |
| xN = xHS_DIV * xN1; |
| if (sN > xN) |
| { |
| sN = xN; |
| sN1 = xN1; |
| sHS_DIV = xHS_DIV; |
| } |
| }; |
| validCombo = 0; |
| if (sHS_DIV == 0) return; // no valid dividers found |
| rfreq = f * (double) sN; // DCO freq |
| if ((float)rfreq > FDCO_MAX) return; // calculated DCO freq > max |
| validCombo = 1; |
| // rfreq is a 38 bit number, MSB 10 bits integer portion, and LSB 28 fraction |
| // in the Si570 registers, tempBuf[1] has 6 bits, and tempBuf[2] has 4 bits of the integer portion |
| rfreq /= fcryst_double; // DCO divided by fcryst |
| rfreq_integer_part = rfreq; |
| rfreq_fraction = rfreq - rfreq_integer_part; |
| rfreq_fraction_part = rfreq_fraction * (1L << 28); |
| sHS_DIV -= 4; |
| sN1 -= 1; |
| tempBuf[0] = (sHS_DIV << 5) | (sN1 >> 2); |
| tempBuf[1] = (sN1 & 3) << 6; |
| tempBuf[1] |= ((rfreq_integer_part >> 4) & 0x3f); |
| tempBuf[2] = ((rfreq_integer_part & 0x0f) << 4) | (rfreq_fraction_part >> 24); |
| tempBuf[3] = rfreq_fraction_part >> 16; |
| tempBuf[4] = rfreq_fraction_part >> 8; |
| tempBuf[5] = rfreq_fraction_part; |
| } |
| void SetNewFreq() |
| { int i; |
| double freq_double; |
| double delta_freq; |
| if(validCombo) |
| { |
| Freeze(); // freeze DCO |
| for (i=7; i<=12; i++){ //Data to Si570 |
| #if defined (UBW) |
| StartI2C(); |
| IdleI2C(); |
| WriteI2C(i2c_adr<<1); |
| WriteI2C(i); //specify register |
| WriteI2C(tempBuf[i-7]); // new data to registers |
| StopI2C(); |
| IdleI2C(); |
| #elif defined (UBW32) |
| StartI2C1(); |
| IdleI2C1(); |
| MasterWriteI2C1(i2c_adr<<1); |
| MasterWriteI2C1(i); //specify register |
| MasterWriteI2C1(tempBuf[i-7]); // new data to registers |
| StopI2C1(); |
| IdleI2C1(); |
| #endif |
| } |
| Unfreeze (); // thaw (unfreeze) |
| // check for smooth tune range |
| freq_double = Freq_From_Register(fcryst_double); |
| if (freq_double >= Old_freq_double) delta_freq = freq_double - Old_freq_double; |
| else delta_freq = Old_freq_double - freq_double; |
| if (((delta_rfreq / Old_rfreq ) > Smooth_double) || (delta_freq > 0.5)){ |
| NewF (); // indicate new freq. This will cause a pause in the Si570 output |
| Old_rfreq = rfreq; |
| Old_freq_double = freq_double; |
| }; |
| // set filters, using set freq without offset and multiplier |
| if (abpf_flag) Set_BPF((float) set_frequency); |
| Set_LPF((float)set_frequency); |
| }; // valid combo |
| } |
| double Freq_From_Register(double fcryst){ // side effects: rfreq and delta_rfreq are set |
| double freq_double; |
| unsigned char n1; |
| unsigned char hsdiv; |
| unsigned long rfreq_integer_portion, rfreq_fraction_portion; |
| // Now find out the current rfreq and freq |
| hsdiv = ((tempBuf[0] & 0xE0) >> 5) + 4; |
| n1 = ((tempBuf[0] & 0x1f ) << 2 ) + ((tempBuf[1] & 0xc0 ) >> 6 ); |
| // if(n1 == 0) n1 = 1; |
| // else if((n1 & 1) !=0) n1 += 1; |
| n1 += 1; |
| rfreq_integer_portion = ((unsigned long)(tempBuf[1] & 0x3f)) << 4 | |
| ((unsigned long)(tempBuf[2] & 0xf0)) >> 4; |
| rfreq_fraction_portion = ((unsigned long) (tempBuf[2] & 0x0f)) << 24; |
| rfreq_fraction_portion += ((unsigned long)(tempBuf[3])) << 16; |
| rfreq_fraction_portion += ((unsigned long)(tempBuf[4])) << 8; |
| rfreq_fraction_portion += ((unsigned long)(tempBuf[5])); |
| rfreq = (double)rfreq_integer_portion + ((double)rfreq_fraction_portion / (1L << 28)); |
| if (rfreq >= Old_rfreq) delta_rfreq = rfreq - Old_rfreq; |
| else delta_rfreq = Old_rfreq - rfreq; |
| freq_double = fcryst * rfreq / (double) hsdiv / (double) n1; |
| return (freq_double); |
| } |
| void Set_BPF(float freq){ // note the freq used is the Si570 freq |
| #if defined(YAS) |
| if (freq < FilterSwitchOver[0]) {BPF_S2 = 0;BPF_S1 = 0; BPF_S0 = 0;} |
| else if (freq < FilterSwitchOver[1]) {BPF_S2 = 0; BPF_S1=0;BPF_S0=1;} |
| else if (freq < FilterSwitchOver[2]) {BPF_S2 = 0;BPF_S1=1;BPF_S0=0;} |
| else if (freq < FilterSwitchOver[3]) {BPF_S2 = 0; BPF_S1 = 1; BPF_S0 = 1;} |
| else if (freq < FilterSwitchOver[4]) {BPF_S2 = 1; BPF_S1 = 0; BPF_S0 = 0;} |
| else if (freq < FilterSwitchOver[5]) {BPF_S2 = 1; BPF_S1 = 0; BPF_S0 = 1;} |
| else if (freq < FilterSwitchOver[6]) {BPF_S2 = 1; BPF_S1 = 1; BPF_S0 = 0;} |
| else {BPF_S2 = 1;BPF_S1=1; BPF_S0=1;}; |
| #else |
| if (freq < FilterSwitchOver[0]) {BPF_S1 = 0; BPF_S0 = 0;} |
| else if (freq < FilterSwitchOver[1]) {BPF_S1=0;BPF_S0=1;} |
| else if (freq < FilterSwitchOver[2]) {BPF_S1=1;BPF_S0=0;} |
| else {BPF_S1=1; BPF_S0=1;}; |
| #endif |
| } |
| void Set_LPF(float freq){ |
| unsigned char LPF_select; |
| LPF_0 = 0; |
| LPF_1 = 0; |
| LPF_2 = 0; |
| #if defined(YAS) |
| if (freq < LPFSwitchOver[0]) {LPF_0 = 0; LPF_1 = 0; LPF_2 = 0; LPF_select = 0x01;} |
| else if (freq < LPFSwitchOver[1]) {LPF_0 = 1; LPF_1 = 0; LPF_2 = 0; LPF_select = 0x02;} |
| else if (freq < LPFSwitchOver[2]) {LPF_0 = 0; LPF_1 = 1; LPF_2 = 0; LPF_select = 0x04;} |
| else if (freq < LPFSwitchOver[3]) {LPF_0 = 1; LPF_1 = 1; LPF_2 = 0; LPF_select = 0x08;} |
| else if (freq < LPFSwitchOver[4]) {LPF_0 = 0; LPF_1 = 0; LPF_2 = 1; LPF_select = 0x10;} |
| else if (freq < LPFSwitchOver[5]) {LPF_0 = 1; LPF_1 = 0; LPF_2 =1; LPF_select = 0x20;} |
| else if (freq < LPFSwitchOver[6]) {LPF_0 = 0; LPF_1 = 1; LPF_2 = 1; LPF_select = 0x40;} |
| else {LPF_0 = 1; LPF_1 = 1; LPF_2 = 1; LPF_select = 0x80;}; |
| #else |
| LPF_3 = 0; |
| LPF_4 = 0; |
| LPF_5 = 0; |
| LPF_6 = 0; |
| if (freq < LPFSwitchOver[0]) {LPF_0 = 1; LPF_select = 0x01;} |
| else if (freq < LPFSwitchOver[1]) {LPF_1 = 1; LPF_select = 0x02;} |
| else if (freq <= LPFSwitchOver[2]) {LPF_2 = 1; LPF_select = 0x04;} |
| else if (freq < LPFSwitchOver[3]) {LPF_3 = 1; LPF_select = 0x08;} |
| else if (freq < LPFSwitchOver[4]) {LPF_4 = 1; LPF_select = 0x10;} |
| else if (freq < LPFSwitchOver[5]) {LPF_5 = 1; LPF_select = 0x20;} |
| else if (freq < LPFSwitchOver[6]) {LPF_6 = 1; LPF_select = 0x40;} |
| else {LPF_6 = 1; LPF_select = 0x80;}; |
| #endif |
| // Now use i2c bus to switch LPF |
| #if defined (UBW) |
| StartI2C(); |
| IdleI2C(); |
| WriteI2C(PCF8574 << 1); |
| WriteI2C(LPF_select); |
| StopI2C(); |
| IdleI2C(); |
| #elif defined (UBW32) |
| StartI2C1(); |
| IdleI2C1(); |
| MasterWriteI2C1(PCF8574 << 1); |
| MasterWriteI2C1(LPF_select); |
| StopI2C1(); |
| IdleI2C1(); |
| #endif |
| } |
| void SetFrequency(double f) |
| { |
| // introduce the offset and mul here |
| RunFreqProg((f - ((double)f_sub.qw / (double)(1L << 21))) * (double)f_mul.qw/(double)(1L <<21)); |
| SetNewFreq(); |
| } |
| void Set_Freq_Handler(void){ // 4 byte freq value in avr_freq format |
| BYTE i; |
| if (command_buffer[current_command_out].wCount == 4){ |
| for (i=0; i<4; i++) avr_freq.bytes[i] = command_buffer[current_command_out].data[i]; |
| set_frequency = (double) avr_freq.qw / (double)(1L << 21); |
| SetFrequency(set_frequency); |
| } |
| } |
| void Set_Register_Handler(void){ // 6 byte register value |
| unsigned char i; |
| if (command_buffer[current_command_out].wCount == 6){ |
| for (i=0; i<6; i++) tempBuf[i] = command_buffer[current_command_out].data[i]; |
| set_frequency = Freq_From_Register(DEFAULT_FCRYST); |
| SetFrequency(set_frequency); |
| } |
| } |
| void Set_Cal_Handler(void){ |
| // 4 bytes of fcryst freq in avr_freq format |
| int i; |
| if (command_buffer[current_command_out].wCount == 4){ |
| for (i=0; i<4; i++)fcryst_freq.bytes[i] = command_buffer[current_command_out].data[i]; |
| fcryst_double = (double) fcryst_freq.qw / (double)(1L << 24); |
| #if defined(UBW) |
| for (i=0; i<4; i++){ |
| Write_b_eep (i+F_CAL_DONE+1, fcryst_freq.bytes[i]); |
| Busy_eep (); |
| }; |
| #elif defined (UBW32) |
| DataEEWrite( (unsigned int) fcryst_freq.qw, (F_CAL_DONE + 1)); |
| #endif |
| #if defined (UBW) |
| Write_b_eep(F_CAL_DONE, F_CAL_DONE_VALUE); |
| Busy_eep(); |
| #elif defined (UBW32) |
| DataEEWrite(F_CAL_DONE_VALUE, F_CAL_DONE); |
| #endif |
| }; |
| } |
| void Set_Init_Freq_Handler(void) |
| { |
| #if defined (UBW) |
| unsigned char i; |
| #else |
| unsigned int i; |
| #endif |
| if (command_buffer[current_command_out].wCount == 4){ |
| for (i=0; i<4; i++) avr_freq.bytes[i] = command_buffer[current_command_out].data[i]; |
| #if defined (UBW) |
| for (i=0; i<4; i++){ |
| Write_b_eep((i + F_INIT_FREQ +1), avr_freq.bytes[i]); |
| Busy_eep(); |
| }; |
| #elif defined (UBW32) |
| DataEEWrite( (unsigned int) avr_freq.qw, (F_INIT_FREQ +1)); |
| #endif |
| #if defined (UBW) |
| Write_b_eep(F_INIT_FREQ, F_INIT_FREQ_VALUE); |
| Busy_eep(); |
| #elif defined (UBW32) |
| DataEEWrite(F_INIT_FREQ_VALUE, F_INIT_FREQ); |
| #endif |
| }; |
| } |
| void Set_Sub_Mul_Handler(void) |
| { |
| #if defined (UBW) |
| unsigned char i; |
| #else |
| unsigned int i; |
| #endif |
| avr_freq_t old_f_mul; |
| offset_t old_f_sub; |
| double filter_value; |
| if (command_buffer[current_command_out].wCount == 8){ |
| old_f_sub = f_sub; // save old values first |
| old_f_mul = f_mul; |
| for (i=0; i<4; i++) f_sub.bytes[i] = command_buffer[current_command_out].data[i]; |
| for (i=0; i<4; i++) f_mul.bytes[i] = command_buffer[current_command_out].data[i+4]; |
| #if defined (UBW) |
| for (i=0; i<4; i++){ |
| Write_b_eep((i + F_SUB_MUL +1), f_sub.bytes[i]); |
| Busy_eep(); |
| }; |
| for (i=0; i<4; i++){ |
| Write_b_eep((i + F_SUB_MUL +5), f_mul.bytes[i]); |
| Busy_eep(); |
| }; |
| #elif defined (UBW32) |
| DataEEWrite( (unsigned int) f_sub.qw, (F_SUB_MUL +1)); |
| DataEEWrite( (unsigned int) f_mul.qw, (F_SUB_MUL +5)); |
| #endif |
| #if defined (UBW) |
| Write_b_eep(F_SUB_MUL, F_SUB_MUL_VALUE); |
| Busy_eep(); |
| #elif defined (UBW32) |
| DataEEWrite(F_SUB_MUL_VALUE, F_SUB_MUL); |
| #endif |
| // Now update the filter switchover points as well |
| for (i = 0; i < (NUM_BPF - 1); i++){ |
| // get back filter_value in Mhz |
| filter_value = FilterSwitchOver[i] / (old_f_mul.qw / ((double) (1L << 21))) / 4 + (old_f_sub.qw / ((double) (1L << 21))); |
| // now convert to new translated values |
| FilterSwitchOver[i] = (filter_value - (f_sub.qw / (double)(1L << 21))) * (f_mul.qw / (double)(1L << 21)) * 4; |
| FilterCrossOver[i] = Switch2Cross(FilterSwitchOver[i]); |
| }; |
| for (i = 0; i < 7; i++){ |
| // get back filter_value in Mhz |
| filter_value = LPFSwitchOver[i] / (old_f_mul.qw / ((double) (1L << 21))) / 4 + (old_f_sub.qw / ((double) (1L << 21))); |
| // now convert to new translated values |
| LPFSwitchOver[i] = (filter_value - (f_sub.qw / (double)(1L << 21))) * (f_mul.qw / (double)(1L << 21)) * 4; |
| LPFCrossOver[i] = Switch2Cross(LPFSwitchOver[i]); |
| }; |
| }; // if wCount == 8 |
| } |
| void Set_Smooth_Handler(void) |
| { |
| WORD_VAL w; |
| unsigned int i; |
| if (command_buffer[current_command_out].wCount == 2){ // 2 bytes of Smooth Tune value in ppm |
| w.v[0] = command_buffer[current_command_out].data[0]; |
| w.v[1] = command_buffer[current_command_out].data[1]; |
| Smooth_double = (double) w.Val / 1000000L; |
| #if defined (UBW) |
| for (i=0; i<2; i++){ |
| Write_b_eep (i+F_SMOOTH+1, w.v[i]); |
| Busy_eep (); |
| }; |
| #elif defined (UBW32) |
| DataEEWrite( (unsigned int) w.Val, (i + F_SMOOTH + 1)); |
| #endif |
| #if defined (UBW) |
| Write_b_eep(F_SMOOTH, F_SMOOTH_VALUE); |
| Busy_eep(); |
| #elif defined (UBW32) |
| DataEEWrite( F_SMOOTH_VALUE, F_SMOOTH); |
| #endif |
| } |
| } |
| /** EOF user.c ***************************************************************/ |
| /Modules/Clock/CLKGEN01B/SW/DG8SAQ synthesiser_Emulator/user.h |
|---|
| 0,0 → 1,197 |
| /********************************************************************* |
| * |
| * Microchip USB C18 Firmware Version 1.2 |
| * |
| ********************************************************************* |
| * FileName: user.h |
| * Dependencies: See INCLUDES section below |
| * Processor: PIC18 |
| * Compiler: C18 3.11+ |
| * Company: Microchip Technology, Inc. |
| * |
| * Software License Agreement |
| * |
| * The software supplied herewith by Microchip Technology Incorporated |
| * (the Company) for its PICmicro® Microcontroller is intended and |
| * supplied to you, the Companys customer, for use solely and |
| * exclusively on Microchip PICmicro Microcontroller products. The |
| * software is owned by the Company and/or its supplier, and is |
| * protected under applicable copyright laws. All rights are reserved. |
| * Any use in violation of the foregoing restrictions may subject the |
| * user to criminal sanctions under applicable laws, as well as to |
| * civil liability for the breach of the terms and conditions of this |
| * license. |
| * |
| * THIS SOFTWARE IS PROVIDED IN AN AS IS CONDITION. NO WARRANTIES, |
| * WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED |
| * TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| * PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, |
| * IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR |
| * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. |
| * |
| * Author Date Comment |
| *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * Rawin Rojvanit 11/19/04 Original. |
| * Rawin Rojvanit 05/14/07 Minor updates. |
| ********************************************************************/ |
| #ifndef PICDEM_FS_DEMO_H |
| #define PICDEM_FS_DEMO_H |
| /** I N C L U D E S **********************************************************/ |
| /** D E F I N I T I O N S ****************************************************/ |
| // For custom LPF switchover points |
| #define ALEX |
| //#define K5OOR |
| //#define MARC |
| // YAS is defined in the HardwareProfile - UBW.h, if needed |
| #if defined(YAS) |
| #define NUM_BPF 8 |
| #else |
| #define NUM_BPF 4 |
| #endif |
| #define INIT_SI570_ON_STARTUP |
| #define VERSION_MAJOR 16 |
| #define VERSION_MINOR 04 |
| #define DEFAULT_I2C_ADDRESS 0x55 |
| #define PCF8574 0x39 // A2 A1 A0 -> 0 0 1 |
| #define F_CAL_DONE 0 // EEPROM position of F_CAL_DONE flag. 4 bytes follow. |
| #define F_CAL_DONE_VALUE 0x55 |
| #define DEFAULT_FCRYST 114.285 |
| //#if defined(UBW) |
| #define F_INIT_FREQ 5 // 4 bytes follow |
| //#elif defined(UBW32) |
| //#define F_INIT_FREQ 2 // fcryst 4 bytes all stored in one 32 bit slot |
| //#endif |
| #define F_INIT_FREQ_VALUE 0x55 |
| #define DEFAULT_INIT_FREQ 56.32 |
| #if defined(UBW) |
| #define F_SMOOTH 10 // 2 bytes follow |
| #elif defined(UBW32) |
| #define F_SMOOTH 4 // 1 slot follow |
| #endif |
| #define F_SMOOTH_VALUE 0x55 |
| #define DEFAULT_SMOOTH 3500 // ppm |
| #define F_SUB_MUL_VALUE 0x55 |
| #define DEFAULT_SUB 0.0 |
| #define DEFAULT_MUL 1.0 |
| #if defined(UBW) |
| #define F_SUB_MUL 13 // 8 bytes follow |
| #elif defined(UBW32) |
| #define F_SUB_MUL 6 // 2 slots follow |
| #endif |
| #if defined(UBW) |
| #define F_CROSS_OVER 22 // 32 bytes follow |
| #elif defined(UBW32) |
| #define F_CROSS_OVER 9 // 16 words stored in 16 (unsigned int) slots |
| #endif |
| #define F_CROSS_OVER_VALUE 0x55 |
| #if defined(UBW) |
| #define F_BLINK_LED 55 |
| #elif defined(UBW32) |
| #define F_BLINK_LED 26 |
| #endif |
| /** S T R U C T U R E S ******************************************************/ |
| extern BYTE i2c_adr; |
| extern BYTE command; |
| extern BYTE replybuf[8]; |
| extern WORD wCount; |
| #define COMMAND_BUFFER_SIZE 16 |
| #define DATA_PACKET_SIZE 6 |
| typedef struct COMMAND_BUFFER |
| { |
| BYTE command; |
| WORD wCount; |
| BYTE data[DATA_PACKET_SIZE]; |
| } COMMAND_BUFFER_t; |
| extern COMMAND_BUFFER_t command_buffer[COMMAND_BUFFER_SIZE]; |
| extern BYTE current_command_in, current_command_out; |
| extern BYTE command_count; |
| extern double set_frequency; |
| extern unsigned char tempBuf[8]; |
| typedef union _avr_freq |
| { |
| unsigned long qw; |
| unsigned char bytes[4]; |
| } avr_freq_t; |
| extern avr_freq_t avr_freq, fcryst_freq; //frequency [MHz]*2^21 |
| // fcryst freq [MHz]*2^24 |
| extern avr_freq_t f_mul; // mul for set freq in 11.21 format |
| typedef union _offset |
| { |
| long qw; // signed offset in 11.21 format |
| unsigned char bytes[4]; |
| } offset_t; |
| extern offset_t f_sub; |
| extern unsigned char registers[6]; |
| extern BYTE abpf_flag; |
| extern double Smooth_double; |
| extern double fcryst_double; |
| extern WORD_VAL FilterCrossOver[8]; // 11.5 bit value Mhz |
| extern float FilterSwitchOver[7]; |
| extern WORD_VAL LPFCrossOver[8]; |
| extern float LPFSwitchOver[7]; |
| /** P U B L I C P R O T O T Y P E S *****************************************/ |
| void UserInit(void); |
| void ProcessIO(void); |
| void Set_Freq_Handler(void); |
| void Set_Register_Handler(void); |
| void Set_Cal_Handler(void); |
| void Set_Init_Freq_Handler(void); |
| void Set_Smooth_Handler(void); |
| void Set_Sub_Mul_Handler(void); |
| void Reset_Si570(void); |
| void Freeze (void); |
| void Unfreeze (void); |
| void Prep_rd (unsigned short); |
| void WriteBk (void); |
| void NewF (void); |
| void SetNewFreq(void); |
| void ReadRegs(void); |
| void ReadStartUpConfiguration(void); |
| void RunFreqProg(double); |
| void SetFrequency(double); |
| void Set_BPF(float); |
| void Set_LPF(float); |
| float Cross2Switch(WORD_VAL); |
| WORD_VAL Switch2Cross(float); |
| double Freq_From_Register(double); |
| void Read_Command_Into_Buffer(void); |
| void USBCheckUserRequest(void); |
| void USBCheckUBWRequest(void); |
| #endif //PICDEM_FS_DEMO_H |