0,0 → 1,152 |
/** |
****************************************************************************** |
* @file stm32f10x_dbgmcu.c |
* @author MCD Application Team |
* @version V3.1.0 |
* @date 06/19/2009 |
* @brief This file provides all the DBGMCU firmware functions. |
****************************************************************************** |
* @copy |
* |
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS |
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE |
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY |
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING |
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE |
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. |
* |
* <h2><center>© COPYRIGHT 2009 STMicroelectronics</center></h2> |
*/ |
|
/* Includes ------------------------------------------------------------------*/ |
#include "stm32f10x_dbgmcu.h" |
|
/** @addtogroup STM32F10x_StdPeriph_Driver |
* @{ |
*/ |
|
/** @defgroup DBGMCU |
* @brief DBGMCU driver modules |
* @{ |
*/ |
|
/** @defgroup DBGMCU_Private_TypesDefinitions |
* @{ |
*/ |
|
/** |
* @} |
*/ |
|
/** @defgroup DBGMCU_Private_Defines |
* @{ |
*/ |
|
#define IDCODE_DEVID_Mask ((uint32_t)0x00000FFF) |
/** |
* @} |
*/ |
|
/** @defgroup DBGMCU_Private_Macros |
* @{ |
*/ |
|
/** |
* @} |
*/ |
|
/** @defgroup DBGMCU_Private_Variables |
* @{ |
*/ |
|
/** |
* @} |
*/ |
|
/** @defgroup DBGMCU_Private_FunctionPrototypes |
* @{ |
*/ |
|
/** |
* @} |
*/ |
|
/** @defgroup DBGMCU_Private_Functions |
* @{ |
*/ |
|
/** |
* @brief Returns the device revision identifier. |
* @param None |
* @retval Device revision identifier |
*/ |
uint32_t DBGMCU_GetREVID(void) |
{ |
return(DBGMCU->IDCODE >> 16); |
} |
|
/** |
* @brief Returns the device identifier. |
* @param None |
* @retval Device identifier |
*/ |
uint32_t DBGMCU_GetDEVID(void) |
{ |
return(DBGMCU->IDCODE & IDCODE_DEVID_Mask); |
} |
|
/** |
* @brief Configures the specified peripheral and low power mode behavior |
* when the MCU under Debug mode. |
* @param DBGMCU_Periph: specifies the peripheral and low power mode. |
* This parameter can be any combination of the following values: |
* @arg DBGMCU_SLEEP: Keep debugger connection during SLEEP mode |
* @arg DBGMCU_STOP: Keep debugger connection during STOP mode |
* @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode |
* @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted |
* @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted |
* @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted |
* @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted |
* @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted |
* @arg DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted |
* @arg DBGMCU_CAN1_STOP: Debug CAN2 stopped when Core is halted |
* @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when Core is halted |
* @arg DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped when Core is halted |
* @arg DBGMCU_TIM5_STOP: TIM5 counter stopped when Core is halted |
* @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted |
* @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted |
* @arg DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted |
* @arg DBGMCU_CAN2_STOP: Debug CAN2 stopped when Core is halted |
* @param NewState: new state of the specified peripheral in Debug mode. |
* This parameter can be: ENABLE or DISABLE. |
* @retval None |
*/ |
void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState) |
{ |
/* Check the parameters */ |
assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph)); |
assert_param(IS_FUNCTIONAL_STATE(NewState)); |
|
if (NewState != DISABLE) |
{ |
DBGMCU->CR |= DBGMCU_Periph; |
} |
else |
{ |
DBGMCU->CR &= ~DBGMCU_Periph; |
} |
} |
|
/** |
* @} |
*/ |
|
/** |
* @} |
*/ |
|
/** |
* @} |
*/ |
|
/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ |