| 0,0 → 1,46 |
|---|
| Generated by EAGLE CAM Processor 6.5.0 |
| |
| Photoplotter Info File: C:/Chroust/Zaloha/MLAB/Modules/CommSerial/I2CHUB02B/SCH_PCB/smb.gpi |
| |
| Date : 11.12.2014 11:34:35 |
| Plotfile : C:/Chroust/Zaloha/MLAB/Modules/CommSerial/I2CHUB02B/SCH_PCB/smb.gbr |
| Apertures : generated: |
| Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch |
| |
| Parameter settings: |
| |
| Emulate Apertures : no |
| Tolerance Draw + : 0.00 % |
| Tolerance Draw - : 0.00 % |
| Tolerance Flash + : 0.00 % |
| Tolerance Flash - : 0.00 % |
| Rotate : no |
| Mirror : no |
| Optimize : yes |
| Auto fit : yes |
| OffsetX : 0inch |
| OffsetY : 0inch |
| |
| Plotfile Info: |
| |
| Coordinate Format : 2.4 |
| Coordinate Units : Inch |
| Data Mode : Absolute |
| Zero Suppression : None |
| End Of Block : * |
| |
| Apertures used: |
| |
| Code Shape Size used |
| |
| D10 rectangle 0.0218inch x 0.0690inch 24 |
| D11 square 0.0730inch 68 |
| D12 rectangle 0.0592inch x 0.0671inch 32 |
| D13 rectangle 0.0671inch x 0.0592inch 12 |
| D14 rectangle 0.0749inch x 0.0789inch 10 |
| D15 round 0.2620inch 4 |
| D16 rectangle 0.0560inch x 0.0960inch 3 |
| D17 rectangle 0.1497inch x 0.0946inch 1 |
| D18 rectangle 0.1064inch x 0.1084inch 2 |
| D19 rectangle 0.0580inch x 0.1080inch 2 |
| |