| 0,0 → 1,51 |
|---|
| Generated by EAGLE CAM Processor 6.4.0 |
| |
| Photoplotter Info File: D:/Honza/MLAB/Modules/CommSerial/USBI2S01A/SCH/smb.gpi |
| |
| Date : 16.3.2014 11:25:43 |
| Plotfile : D:/Honza/MLAB/Modules/CommSerial/USBI2S01A/SCH/smb.gbr |
| Apertures : generated: |
| Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch |
| |
| Parameter settings: |
| |
| Emulate Apertures : no |
| Tolerance Draw + : 0.00 % |
| Tolerance Draw - : 0.00 % |
| Tolerance Flash + : 0.00 % |
| Tolerance Flash - : 0.00 % |
| Rotate : no |
| Mirror : no |
| Optimize : yes |
| Auto fit : yes |
| OffsetX : 0inch |
| OffsetY : 0inch |
| |
| Plotfile Info: |
| |
| Coordinate Format : 2.4 |
| Coordinate Units : Inch |
| Data Mode : Absolute |
| Zero Suppression : None |
| End Of Block : * |
| |
| Apertures used: |
| |
| Code Shape Size used |
| |
| D10 draw 0.0157inch 32 |
| D11 square 0.1417inch 1 |
| D12 round 0.2620inch 4 |
| D13 rectangle 0.0493inch x 0.0671inch 2 |
| D14 round 0.1143inch 3 |
| D15 rectangle 0.0671inch x 0.0493inch 4 |
| D16 round 0.0642inch 4 |
| D17 round 0.1580inch 2 |
| D18 rectangle 0.0828inch x 0.1419inch 2 |
| D19 rectangle 0.0590inch x 0.0470inch 26 |
| D20 rectangle 0.0470inch x 0.0590inch 18 |
| D21 square 0.0730inch 56 |
| D22 rectangle 0.0671inch x 0.0592inch 2 |
| D23 rectangle 0.1261inch x 0.0356inch 1 |
| D24 rectangle 0.0592inch x 0.0671inch 2 |
| |