| 0,0 → 1,47 |
|---|
| Generated by EAGLE CAM Processor 6.1.0 |
| |
| Photoplotter Info File: D:/Honza/MLAB/Modules/H_Bridge/DRV8835HB01A/SCH_PCB/smb.gpi |
| |
| Date : 19.3.2013 16:24:56 |
| Plotfile : D:/Honza/MLAB/Modules/H_Bridge/DRV8835HB01A/SCH_PCB/smb.gbr |
| Apertures : generated: |
| Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch |
| |
| Parameter settings: |
| |
| Emulate Apertures : no |
| Tolerance Draw + : 0.00 % |
| Tolerance Draw - : 0.00 % |
| Tolerance Flash + : 0.00 % |
| Tolerance Flash - : 0.00 % |
| Rotate : no |
| Mirror : no |
| Optimize : yes |
| Auto fit : yes |
| OffsetX : 0inch |
| OffsetY : 0inch |
| |
| Plotfile Info: |
| |
| Coordinate Format : 2.4 |
| Coordinate Units : Inch |
| Data Mode : Absolute |
| Zero Suppression : None |
| End Of Block : * |
| |
| Apertures used: |
| |
| Code Shape Size used |
| |
| D10 rectangle 0.0277inch x 0.0190inch 12 |
| D11 rectangle 0.0434inch x 0.0867inch 1 |
| D12 rectangle 0.0178inch x 0.0356inch 4 |
| D13 round 0.0437inch 3 |
| D14 square 0.1580inch 12 |
| D15 rectangle 0.0671inch x 0.0592inch 4 |
| D16 rectangle 0.0592inch x 0.0671inch 4 |
| D17 square 0.0730inch 21 |
| D18 rectangle 0.1084inch x 0.1064inch 2 |
| D19 rectangle 0.0631inch x 0.0789inch 4 |
| D20 round 0.2620inch 4 |
| |