| 0,0 → 1,43 |
|---|
| Generated by EAGLE CAM Processor 6.1.0 |
| |
| Photoplotter Info File: D:/Honza/MLAB_E/Modules/Drivers/HBSTEP01A/CAM_PROFI/M1.gpi |
| |
| Date : 25.6.2012 9:35:25 |
| Plotfile : D:/Honza/MLAB_E/Modules/Drivers/HBSTEP01A/CAM_PROFI/M1.PHO |
| Apertures : generated: |
| Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch |
| |
| Parameter settings: |
| |
| Emulate Apertures : no |
| Tolerance Draw + : 0.00 % |
| Tolerance Draw - : 0.00 % |
| Tolerance Flash + : 0.00 % |
| Tolerance Flash - : 0.00 % |
| Rotate : no |
| Mirror : no |
| Optimize : yes |
| Auto fit : yes |
| OffsetX : 0inch |
| OffsetY : 0inch |
| |
| Plotfile Info: |
| |
| Coordinate Format : 2.4 |
| Coordinate Units : Inch |
| Data Mode : Absolute |
| Zero Suppression : None |
| End Of Block : * |
| |
| Apertures used: |
| |
| Code Shape Size used |
| |
| D10 square 0.1620inch 12 |
| D11 square 0.0770inch 37 |
| D12 round 0.2660inch 4 |
| D13 round 0.0477inch 87 |
| D14 round 0.0516inch 11 |
| D15 round 0.0595inch 2 |
| D16 square 0.0516inch 2 |
| |