| 0,0 → 1,62 |
|---|
| Generated by EAGLE CAM Processor 6.1.0 |
| |
| Photoplotter Info File: D:/Honza/MLAB_E/Modules/Drivers/HBSTEP01A/CAM_PROFI/V2.gpi |
| |
| Date : 25.6.2012 9:35:25 |
| Plotfile : D:/Honza/MLAB_E/Modules/Drivers/HBSTEP01A/CAM_PROFI/V2.PHO |
| Apertures : generated: |
| Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch |
| |
| Parameter settings: |
| |
| Emulate Apertures : no |
| Tolerance Draw + : 0.00 % |
| Tolerance Draw - : 0.00 % |
| Tolerance Flash + : 0.00 % |
| Tolerance Flash - : 0.00 % |
| Rotate : no |
| Mirror : no |
| Optimize : yes |
| Auto fit : yes |
| OffsetX : 0inch |
| OffsetY : 0inch |
| |
| Plotfile Info: |
| |
| Coordinate Format : 2.4 |
| Coordinate Units : Inch |
| Data Mode : Absolute |
| Zero Suppression : None |
| End Of Block : * |
| |
| Apertures used: |
| |
| Code Shape Size used |
| |
| D10 draw 0.0050inch 37 |
| D11 rectangle 0.0827inch x 0.0240inch 4 |
| D12 rectangle 0.0472inch x 0.0106inch 24 |
| D13 rectangle 0.1102inch x 0.2165inch 1 |
| D14 rectangle 0.0551inch x 0.0394inch 3 |
| D15 rectangle 0.0591inch x 0.0512inch 20 |
| D16 rectangle 0.0512inch x 0.0591inch 8 |
| D17 rectangle 0.0500inch x 0.1000inch 2 |
| D18 square 0.1500inch 12 |
| D19 square 0.0650inch 37 |
| D20 round 0.2540inch 4 |
| D21 rectangle 0.1161inch x 0.1063inch 2 |
| D22 square 0.0945inch 2 |
| D23 rectangle 0.0669inch x 0.0709inch 2 |
| D24 rectangle 0.0709inch x 0.0551inch 2 |
| D25 draw 0.0120inch 2814 |
| D26 round 0.0357inch 87 |
| D27 draw 0.0160inch 38 |
| D28 draw 0.0860inch 6 |
| D29 draw 0.0240inch 7 |
| D30 round 0.0396inch 11 |
| D31 draw 0.0500inch 52 |
| D32 draw 0.0400inch 12 |
| D33 draw 0.0320inch 7 |
| D34 round 0.0475inch 2 |
| D35 square 0.0396inch 2 |
| |