| 0,0 → 1,59 |
|---|
| Generated by EAGLE CAM Processor 6.1.0 |
| |
| Photoplotter Info File: D:/Honza/MLAB/Modules/Measuring/GPS01A/SCH_PCB/bot.gpi |
| |
| Date : 21.2.2013 12:31:43 |
| Plotfile : D:/Honza/MLAB/Modules/Measuring/GPS01A/SCH_PCB/bot.gbr |
| Apertures : generated: |
| Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch |
| |
| Parameter settings: |
| |
| Emulate Apertures : no |
| Tolerance Draw + : 0.00 % |
| Tolerance Draw - : 0.00 % |
| Tolerance Flash + : 0.00 % |
| Tolerance Flash - : 0.00 % |
| Rotate : no |
| Mirror : no |
| Optimize : yes |
| Auto fit : yes |
| OffsetX : 0inch |
| OffsetY : 0inch |
| |
| Plotfile Info: |
| |
| Coordinate Format : 2.4 |
| Coordinate Units : Inch |
| Data Mode : Absolute |
| Zero Suppression : None |
| End Of Block : * |
| |
| Apertures used: |
| |
| Code Shape Size used |
| |
| D10 draw 0.0040inch 98 |
| D11 rectangle 0.0315inch x 0.0709inch 28 |
| D12 rectangle 0.0220inch x 0.0780inch 8 |
| D13 round 0.0562inch 4 |
| D14 round 0.1500inch 2 |
| D15 square 0.0650inch 33 |
| D16 rectangle 0.1339inch x 0.0748inch 2 |
| D17 rectangle 0.0512inch x 0.0591inch 14 |
| D18 rectangle 0.0591inch x 0.0512inch 22 |
| D19 rectangle 0.1000inch x 0.0500inch 2 |
| D20 square 0.0591inch 4 |
| D21 rectangle 0.0551inch x 0.0394inch 15 |
| D22 round 0.1004inch 4 |
| D23 round 0.0886inch 1 |
| D24 square 0.0600inch 2 |
| D25 round 0.2540inch 4 |
| D26 draw 0.0339inch 2026 |
| D27 draw 0.0120inch 204 |
| D28 round 0.0317inch 454 |
| D29 draw 0.0240inch 42 |
| D30 draw 0.0100inch 7 |
| D31 draw 0.0080inch 4 |
| D32 draw 0.0080inch 1 |
| |