| 0,0 → 1,49 |
|---|
| Generated by EAGLE CAM Processor 6.1.0 |
| |
| Photoplotter Info File: D:/Honza/MLAB/Modules/Measuring/LCM01A/SCH_PCB/bot.gpi |
| |
| Date : 21.11.2012 21:12:30 |
| Plotfile : D:/Honza/MLAB/Modules/Measuring/LCM01A/SCH_PCB/bot.gbr |
| Apertures : generated: |
| Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch |
| |
| Parameter settings: |
| |
| Emulate Apertures : no |
| Tolerance Draw + : 0.00 % |
| Tolerance Draw - : 0.00 % |
| Tolerance Flash + : 0.00 % |
| Tolerance Flash - : 0.00 % |
| Rotate : no |
| Mirror : no |
| Optimize : yes |
| Auto fit : yes |
| OffsetX : 0inch |
| OffsetY : 0inch |
| |
| Plotfile Info: |
| |
| Coordinate Format : 2.4 |
| Coordinate Units : Inch |
| Data Mode : Absolute |
| Zero Suppression : None |
| End Of Block : * |
| |
| Apertures used: |
| |
| Code Shape Size used |
| |
| D10 rectangle 0.0866inch x 0.0236inch 8 |
| D11 rectangle 0.0591inch x 0.0512inch 18 |
| D12 rectangle 0.0512inch x 0.0591inch 4 |
| D13 rectangle 0.1000inch x 0.0500inch 10 |
| D14 square 0.0650inch 14 |
| D15 round 0.2540inch 4 |
| D16 rectangle 0.0827inch x 0.0591inch 4 |
| D17 rectangle 0.0580inch x 0.0140inch 16 |
| D18 rectangle 0.0354inch x 0.0157inch 5 |
| D19 draw 0.0160inch 1651 |
| D20 round 0.0396inch 51 |
| D21 draw 0.0240inch 40 |
| D22 draw 0.0120inch 9 |
| |