/Modules/Mechanical/Boxes/BASEBOX02A/CAD/assembly.scad
1,7 → 1,6
use <configuration/sloupek.scad>
use <configuration/plbase.scad>
use <configuration/bocnice.scad>
use <uravena_celicka.scad>
use <configuration/otvory.scad>
use <configuration/text/Write.scad>
 
40,11 → 39,11
 
//základní plbase bez nožiček s nadpisem
 
translate([-((pocet_der2+2)*vzdalenost_der+2*vzdalenost_od_okraje)/2-tloustka_bocnice,-vzdalenost_od_okraje-tloustka_bocnice,vyska_bocnice/2])
translate([-((pocet_der2+2)*vzdalenost_der+2*vzdalenost_od_okraje)/2-tloustka_bocnice,-vzdalenost_od_okraje-tloustka_bocnice,10*vyska_bocnice/2])
rotate(a=[0,0,0])
{
plbase_bez_der_napis(pocet_der2+3,pocet_der1+3,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,tloustka_plbase,prekryti_der,box_jmeno);
plbase_bez_der_napis(pocet_der2+3,pocet_der1+3,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,tloustka_plbase,prekryti_der,box_jmeno,tloustka_bocnice);
}
 
/Modules/Mechanical/Boxes/BASEBOX02A/CAD/configuration/bocnice.scad
81,8 → 81,8
}
}
 
bocnice(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice);
 
 
 
 
/Modules/Mechanical/Boxes/BASEBOX02A/CAD/configuration/manufactury_conf.scad
1,7 → 1,7
$fn=20; // model faces resolution.
 
//Sroub - podpěra pro tisk sloupku
vyska_podpery=8;
vyska_podpery=12;
vyska_mat_pod_matici=3;
 
//Sroub - parametry
/Modules/Mechanical/Boxes/BASEBOX02A/CAD/configuration/plbase.scad
159,7 → 159,7
}
//PLBASE ZAKLADNI - bez der s napisem produktu
//------------------------------------------------------------
module plbase_bez_der_napis(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,tloustka_plbase,prekryti_der,box_jmeno){
module plbase_bez_der_napis(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,tloustka_plbase,prekryti_der,box_jmeno,tloustka_bocnice){
 
 
 
172,7 → 172,7
cylinder(r=radidus_hrany,h=0.1);
}
translate([radidus_hrany,radidus_hrany,0])
translate([ ((pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany)/2, ((pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany)/2, tloustka_plbase/2+1])
translate([ ((pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany)/2+tloustka_bocnice, ((pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany)/2+tloustka_bocnice, tloustka_plbase/2+1])
rotate([0,0,0])
write(box_jmeno,h=10,t=tloustka_plbase-1, space= 1.1, font = "Letters.dxf",center=true);
 
/Modules/Mechanical/Boxes/BASEBOX02A/CAD/configuration/sloupek.scad
100,13 → 100,13
translate([-tloustka_bocnice,-tloustka_bocnice,0])
difference () {
 
translate([-2*vzdalenost_od_okraje,-2*vzdalenost_od_okraje,0])
translate([-2*vzdalenost_od_okraje,-2*vzdalenost_od_okraje,-vyska_bocnice/2])
minkowski()
{
cube([(pocet_der1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*tloustka_bocnice+4*vzdalenost_od_okraje,(pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*tloustka_bocnice+4*vzdalenost_od_okraje,vyska_bocnice]); // base plastics brick
cylinder(r=radidus_hrany,h=0.1);
}
translate([tloustka_bocnice,tloustka_bocnice,-0.025])
translate([tloustka_bocnice,tloustka_bocnice,-vyska_bocnice/2-0.025])
minkowski()
{
cube([(pocet_der1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany,(pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany,vyska_bocnice+0.05]); // base plastics brick
/Modules/Mechanical/Boxes/BASEBOX02A/CAD/configuration.scad
11,10 → 11,10
vzdalenost_od_okraje = 8.88; //vzdalenost stredu upevnovaci diry od kraje desky
 
//mala hrana
pocet_der1 = 2; //pocet der desky, ponížené o 3
pocet_der1 = 0; //pocet der desky, ponížené o 3
 
//velka hrana
pocet_der2 = 20; //pocet der desky, ponížené o 3
pocet_der2 = 4; //pocet der desky, ponížené o 3
//*/
 
 
21,7 → 21,7
//OBECNE PARAMETRY KRABICKY
//------------------------------------------------------------
//BOCNICE
vyska_bocnice=40;
vyska_bocnice=30;
tloustka_bocnice=2;
 
//PLBASE PARAMETRY
/Modules/Mechanical/Boxes/BASEBOX02A/CAD/print_data/BASEBOX01A_plate3.scad
File deleted
/Modules/Mechanical/Boxes/BASEBOX02A/CAD/print_data/BASEBOX01A_plate4.scad
File deleted
\ No newline at end of file
/Modules/Mechanical/Boxes/BASEBOX02A/CAD/print_data/BASEBOX01A_PLBASE_top.scad
File deleted
\ No newline at end of file
/Modules/Mechanical/Boxes/BASEBOX02A/CAD/print_data/BASEBOX01A_upright.scad
File deleted
/Modules/Mechanical/Boxes/BASEBOX02A/CAD/print_data/BASEBOX01A_PLBASE_bottom.scad
File deleted
/Modules/Mechanical/Boxes/BASEBOX02A/CAD/print_data/BASEBOX01A_plate1.scad
File deleted
\ No newline at end of file
/Modules/Mechanical/Boxes/BASEBOX02A/CAD/print_data/BASEBOX01A_plate2.scad
File deleted
\ No newline at end of file
/Modules/Mechanical/Boxes/BASEBOX02A/CAD/print_data/BASEBOX02A.scad
0,0 → 1,24
use <../configuration/plbase.scad>
use <../configuration/sloupek.scad>
use <../configuration/bocnice.scad>
 
 
 
include <../configuration/manufactury_conf.scad>
include <../configuration.scad>
 
 
 
//BOCNICE
//-------------------------------------------------------------
translate([0,0,(vyska_bocnice/2)+tloustka_plbase])
bocnice(pocet_der1+2,pocet_der2+2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice);
 
 
//PLBASE SPODNI
//-------------------------------------------------------------
translate([-((pocet_der2+2)*vzdalenost_der+2*vzdalenost_od_okraje)/2-tloustka_bocnice,-vzdalenost_od_okraje-tloustka_bocnice,tloustka_plbase])
rotate(a=[180,0,90])
 
 
plbase(pocet_der1+3,pocet_der2+3,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,tloustka_plbase,prekryti_der,tloustka_bocnice);
/Modules/Mechanical/Boxes/BASEBOX02A/CAD/print_data/BASEBOX02A_PLBASE_top.scad
0,0 → 1,15
use <../configuration/plbase.scad>
 
 
 
include <../configuration/manufactury_conf.scad>
include <../configuration.scad>
 
 
translate([-((pocet_der2+2)*vzdalenost_der+2*vzdalenost_od_okraje)/2-tloustka_bocnice,-((pocet_der1+2)*vzdalenost_der+2*vzdalenost_od_okraje)/2-tloustka_bocnice,0])
rotate(a=[0,0,0])
{
plbase_bez_der_napis(pocet_der2+3,pocet_der1+3,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,tloustka_plbase,prekryti_der,box_jmeno,tloustka_bocnice);
}