WebSVN – MLAB – /Modules/Mechanical/AWSCREEN01A/CAD/SRC Rev 4542 and /Modules/Mechanical/AWSCREEN01A/CAD/SRC Rev 4543 – Path Comparison

/Modules/Mechanical/AWSCREEN01A/CAD/SRC/AWSCREEN01A_D04.scad
31,8 → 31,13
difference()
{
translate([0,0,D04_sila_materialu_na_konektor])
screw_thread(S01_prumer_zavitu-D01_material_za_zavitem-2*D03_tolerance_zavitu,4,55,D01_material_pod_zavitem,PI/2,2);
screw_thread(S01_prumer_zavitu-D01_material_za_zavitem-2*D03_tolerance_zavitu,4,55,D01_material_pod_zavitem+4,PI/2,2);


translate([0,0,D04_sila_materialu_na_konektor+D01_material_pod_zavitem])
cylinder (h = 5, r=(S01_prumer_zavitu-D01_material_za_zavitem-2*D03_tolerance_zavitu+10)/2, $fn=100);


cylinder (h = 0.01+D01_material_pod_zavitem+D04_sila_materialu_na_konektor, r=(S01_prumer_zavitu-D01_material_za_zavitem-2*D03_tolerance_zavitu-D01_material_za_zavitem)/2, $fn=100);
}

39,15 → 44,25
//materiál držáku konektoru
translate([0,0,D04_sila_materialu_na_konektor/2])
cube([D04_konenektor_x+12,(S01_prumer_zavitu-D01_material_za_zavitem-2*D03_tolerance_zavitu-D01_material_za_zavitem),D04_sila_materialu_na_konektor],true);

//materiál pro kryt konektoru
//spodní krychle
translate([0,-(S01_prumer_zavitu-D01_material_za_zavitem-2*D03_tolerance_zavitu)/4+5,D04_konenektor_z/2+D04_sila_materialu_na_konektor])
cube([D04_konenektor_x+6+2D03_tloustka_materialu,(S01_prumer_zavitu-D01_material_za_zavitem-2D03_tolerance_zavitu)/2,D04_konenektor_z],true);


//vrchní válec
translate([0,5,D04_sila_materialu_na_konektor+D04_konenektor_z])

rotate ([90,0,0])
cylinder (h = D04_konenektor_x+6+2D03_tloustka_materialu, r=(S01_prumer_zavitu-D01_material_za_zavitem-2D03_tolerance_zavitu)/4, $fn=100);
difference()
{
cylinder (h = (S01_prumer_zavitu-D01_material_za_zavitem-2D03_tolerance_zavitu)/2, r=(D04_konenektor_x+6+2D03_tloustka_materialu)/2, $fn=100);

translate([0,-(S01_prumer_zavitu-D01_material_za_zavitem-2D03_tolerance_zavitu)/4,(D04_konenektor_x+6+2D03_tloustka_materialu)/2])

cube([(S01_prumer_zavitu-D01_material_za_zavitem-2D03_tolerance_zavitu)/2,(S01_prumer_zavitu-D01_material_za_zavitem-2D03_tolerance_zavitu)/2,D04_konenektor_x+6+2*D03_tloustka_materialu],true);
}

}

64,13 → 79,19
cube([D04_konenektor_x+6,(S01_prumer_zavitu-D01_material_za_zavitem-2*D03_tolerance_zavitu-D01_material_za_zavitem)/2+8,D04_konenektor_z],true);

//odstranění vrchního válce
translate([0,1,D04_sila_materialu_na_konektor+D04_konenektor_z])
translate([0,5-D03_tloustka_materialu,D04_sila_materialu_na_konektor+D04_konenektor_z])

rotate ([90,0,0])
cylinder (h = D04_konenektor_x+6+2D03_tloustka_materialu, r=(S01_prumer_zavitu-D01_material_za_zavitem-2D03_tolerance_zavitu)/4-D03_tloustka_materialu, $fn=100);
difference()
{
cylinder (h = (S01_prumer_zavitu-D01_material_za_zavitem-2*D03_tolerance_zavitu)/2, r=(D04_konenektor_x+6)/2, $fn=100);
//odečtení půl válce
translate([0,-(S01_prumer_zavitu-D01_material_za_zavitem-2D03_tolerance_zavitu)/4,(D04_konenektor_x+6+2D03_tloustka_materialu)/2])

cube([(S01_prumer_zavitu-D01_material_za_zavitem-2D03_tolerance_zavitu)/2,(S01_prumer_zavitu-D01_material_za_zavitem-2D03_tolerance_zavitu)/2,D04_konenektor_x+6+2*D03_tloustka_materialu],true);
}



//otvor na senzor v držáku
translate([0,7,-2])
translate([0,0,(15+5.08)/2-(5.08+3.3+2)/2])
80,13 → 101,13

}

translate([0,7,(13+5.08)/2+D04_sila_materialu_na_konektor])
translate([0,7,(D04_vyska_drzaku_senzoru)/2])
difference()
{
cube([10.16+2D03_tloustka_materialu,3+2D03_tloustka_materialu,13+5.08],true);
translate([0,0,(15+5.08)/2-(5.08+3.3+2)/2-3])
cube([10.16,3,25],true);
translate([0,15,(15+5.08)/2-(3.3)/2-2])
cube([10.16+2D03_tloustka_materialu,3+2D03_tloustka_materialu,D04_vyska_drzaku_senzoru],true);

cube([10.16,3,D04_vyska_drzaku_senzoru+0.01],true);
translate([0,5,D04_vyska_drzaku_senzoru/2-3.08])
rotate ([90,0,0])
cylinder (h = 30, r=(3.3/2), $fn=100);
}

/Modules/Mechanical/AWSCREEN01A/CAD/SRC/AWSCREEN01A_D05.scad
24,8 → 24,8


//zavit
translate([0,0,D01_material_pod_zavitem])
screw_thread(S01_prumer_zavitu-2*D03_tolerance_zavitu,4,55,S01_vyska_komponentu_na_lozisko,PI/2,2);
translate([0,0,D01_material_pod_zavitem-2])
screw_thread(S01_prumer_zavitu-2*D03_tolerance_zavitu,4,55,S01_vyska_komponentu_na_lozisko+5,PI/2,2);


difference()
64,16 → 64,18

translate([0,D01_delka_tyce+S01_prumer_zavitu/2+D01_material_pred_zavitem+D02_sila_materialu+(D02_prumer_obruby)/2,D02_vyska_uchytky/2])
rotate(a=[0,0,270])
AWSCREEN01A_D06(D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu);
AWSCREEN01A_D06_2();

}

//otvor
translate([0,0,D01_material_pod_zavitem+S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+0.02, r=(S01_prumer_zavitu-2*D03_tolerance_zavitu-D01_material_za_zavitem)/2, center = true, $fn=100);
translate([0,0,D01_material_pod_zavitem-1+S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+2+0.02, r=(S01_prumer_zavitu-2*D03_tolerance_zavitu-D01_material_za_zavitem)/2, center = true, $fn=100);

//odecet vrchního závitu aby byl rovný
translate([0,0,D01_material_pod_zavitem+S01_vyska_komponentu_na_lozisko])


cylinder (h = S01_vyska_komponentu_na_lozisko+0.02, r=(S01_prumer_zavitu-2*D03_tolerance_zavitu)/2, $fn=100);
}
}

 /Modules/Mechanical/AWSCREEN01A/CAD/SRC/AWSCREEN01A_D06.scad
 ,32 → 5,84
 module AWSCREEN01A_D06(D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu){
-                difference(){
-                        union(){
-                //základní válec
-                    cylinder(h=D02_vyska_uchytky,r=(D02_prumer_obruby+2*D02_sila_materialu)/2,center=true);
-                                //úchytové plošky
-                                        translate([D02_dotahova_vzdalenost+D02_sila_materialu/2,0,0]){cube([D02_sila_materialu,D02_delka_celeho_uchytu,D02_vyska_uchytky],center=true);}
-                                }
-                //válec na odečet
-           cylinder(h=D02_vyska_uchytky+0.01,r=D02_prumer_obruby/2,center=true);
-            //kvádr na odecet
-                        translate([D02_dotahova_vzdalenost-(D02_prumer_obruby+2*D02_sila_materialu)/2,0,0]){cube([D02_prumer_obruby+2*D02_sila_materialu,D02_prumer_obruby+2*D02_sila_materialu,D02_vyska_uchytky+0.01],center=true);}
+                difference()
+    {
+    union()
+        {
+        //základní válec
+        cylinder(h=D02_vyska_uchytky,r=(D02_prumer_obruby+2*D02_sila_materialu)/2,center=true);
+                //úchytové plošky
+        translate([D02_dotahova_vzdalenost+D02_sila_materialu/2,0,0]){cube([D02_sila_materialu,D02_delka_celeho_uchytu,D02_vyska_uchytky],center=true);}
+                }
+    //válec na odečet
+    cylinder(h=D02_vyska_uchytky+0.01,r=D02_prumer_obruby/2,center=true);
+    //kvádr na odecet
+        translate([D02_dotahova_vzdalenost-(D02_prumer_obruby+2*D02_sila_materialu)/2,0,0]){cube([D02_prumer_obruby+2*D02_sila_materialu,D02_prumer_obruby+2*D02_sila_materialu,D02_vyska_uchytky+0.01],center=true);}
         //otvory na sroub
-                translate([D02_dotahova_vzdalenost,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+        translate([D02_dotahova_vzdalenost,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+     //drzak matky
+    translate([D02_dotahova_vzdalenost+D02_sila_materialu-D02_vyska_matky,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,D02_vyska_uchytky/4]){rotate([0,90,0]){ cylinder (h = D02_vyska_matky+0.01, r= (D02_sirka_matky+0.2)/2, $fn=6);}}
-                        translate([D02_dotahova_vzdalenost,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,-D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+    translate([D02_dotahova_vzdalenost,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,-D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+     //drzak matky
+    translate([D02_dotahova_vzdalenost+D02_sila_materialu-D02_vyska_matky,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,-D02_vyska_uchytky/4]){rotate([0,90,0]){ cylinder (h = D02_vyska_matky+0.01, r= (D02_sirka_matky+0.2)/2, $fn=6);}}
         translate([D02_dotahova_vzdalenost,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),-D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+     //drzak matky
+    translate([D02_dotahova_vzdalenost+D02_sila_materialu-D02_vyska_matky,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),-D02_vyska_uchytky/4]){rotate([0,90,0]){ cylinder (h = D02_vyska_matky+0.01, r= (D02_sirka_matky+0.2)/2, $fn=6);}}
-translate([D02_dotahova_vzdalenost,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+    translate([D02_dotahova_vzdalenost,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+     //drzak matky
+    translate([D02_dotahova_vzdalenost+D02_sila_materialu-D02_vyska_matky,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),D02_vyska_uchytky/4]){rotate([0,90,0]){ cylinder (h = D02_vyska_matky+0.01, r= (D02_sirka_matky+0.2)/2, $fn=6);}}
+    }
 }
-}
+module AWSCREEN01A_D06_2(){
+difference()
+    {
+    union()
+        {
+        //základní válec
+        cylinder(h=D02_vyska_uchytky,r=(D02_prumer_obruby+2*D02_sila_materialu)/2,center=true);
+                //úchytové plošky
+        translate([D02_dotahova_vzdalenost+D02_sila_materialu/2,0,0]){cube([D02_sila_materialu,D02_delka_celeho_uchytu,D02_vyska_uchytky],center=true);}
+                }
+    //válec na odečet
+    cylinder(h=D02_vyska_uchytky+0.01,r=D02_prumer_obruby/2,center=true);
+    //kvádr na odecet
+        translate([D02_dotahova_vzdalenost-(D02_prumer_obruby+2*D02_sila_materialu)/2,0,0]){cube([D02_prumer_obruby+2*D02_sila_materialu,D02_prumer_obruby+2*D02_sila_materialu,D02_vyska_uchytky+0.01],center=true);}
+        //otvory na sroub
+        translate([D02_dotahova_vzdalenost,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+    translate([D02_dotahova_vzdalenost,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,-D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+        translate([D02_dotahova_vzdalenost,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),-D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+    translate([D02_dotahova_vzdalenost,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+    }
+}

Subversion Repositories – MLAB

/Modules/Mechanical/AWSCREEN01A/CAD/SRC @ 4542 → /Modules/Mechanical/AWSCREEN01A/CAD/SRC @ 4543

Compare Path:	Rev
With Path:	Rev