WebSVN – MLAB – /Modules/Mechanical/AWSCREEN01A/CAD Rev 4507 and /Modules/Mechanical/AWSCREEN01A/CAD Rev 4508 – Path Comparison

/Modules/Mechanical/AWSCREEN01A/CAD/SRC/AWSCREEN01A_D02.scad
47,7 → 47,7
difference () {
cylinder (h=5,r1=D03_polomer_zavitu ,r2=1,$fn=100);
translate ([0,0,-0.01/2])
cylinder (h=5,r1=D03_polomer_zavitu-D03_tloustka_materialu ,r2=0,$fn=100);
cylinder (h=5-D03_tloustka_materialu,r1=D03_polomer_zavitu-D03_tloustka_materialu ,r2=0,$fn=100);


}

 /Modules/Mechanical/AWSCREEN01A/CAD/SRC/AWSCREEN01A_D04.scad
 ,30 → 1,62
 $fn=40; // model faces resolution.
 include <../configuration.scad>
 include <polyScrewThread_r1.scad>
-include <AWSCREEN01A_D03.scad>
-module AWSCREEN01A_D04(D03_vyska_zavitu,D03_tolerance_zavitu,D03_material_za_zavitem,D03_polomer_zavitu,D03_polomer_stitu,D03_tloustka_materialu,D03_vyska_stitu,D03_pocet_vyztuh,screen_bevel,D04_vyska_na_elektroniku,D04_vyska_zavitu,D04_vyska_zavitu_pro_drzak_elektorniky)
+AWSCREEN01A_D04();
+module AWSCREEN01A_D04()
     {
-     translate ([0,0,0])
-    // screen upper rim
-     translate ([0,0,D04_vyska_zavitu+D04_vyska_na_elektroniku])
-    difference () {
-        screw_thread((D03_polomer_zavitu-D03_tolerance_zavitu)*2,4,55,D03_vyska_zavitu,PI/2,2);
+difference()
+        {
+union()
+   {
+    difference()
+        {
+ translate([0,0,0])
+cylinder (h = D04_sila_materialu_na_konektor, r=(S01_prumer_zavitu+2*D01_material_pred_zavitem)/2, $fn=100);
+      }
-     cylinder (h=0.01+D03_vyska_zavitu,r = D03_polomer_zavitu-4,$fn=100);
-    }
-     difference () {
-    cylinder (h=D04_vyska_zavitu+D04_vyska_na_elektroniku,r = D03_polomer_zavitu + D03_material_za_zavitem,$fn=100);
-    translate ([0,0,D04_vyska_zavitu])
-     cylinder (h=0.01+D04_vyska_na_elektroniku,r = D03_polomer_zavitu-2,$fn=100);
-     translate ([0,0,-0.1])
-    screw_thread(D03_polomer_zavitu*2,4,55,D04_vyska_zavitu+4,PI/2,2);
-    }
-      }
- AWSCREEN01A_D04(D03_vyska_zavitu,D03_tolerance_zavitu,D03_material_za_zavitem,D03_polomer_zavitu,D03_polomer_stitu,D03_tloustka_materialu,D03_vyska_stitu,D03_pocet_vyztuh,screen_bevel,D04_vyska_na_elektroniku,D04_vyska_zavitu,D04_vyska_zavitu_pro_drzak_elektorniky);
+     difference()
+        {
+    translate([0,0,D04_sila_materialu_na_konektor])
+ screw_thread(S01_prumer_zavitu-D01_material_za_zavitem-2*D03_tolerance_zavitu,4,55,D01_material_pod_zavitem,PI/2,2);
+            cylinder (h = 0.01+D01_material_pod_zavitem+D04_sila_materialu_na_konektor, r=(S01_prumer_zavitu-D01_material_za_zavitem-2*D03_tolerance_zavitu-D01_material_za_zavitem)/2, $fn=100);
+}
+}
+//otvor na konektor
+ translate([0,-(S01_prumer_zavitu-D01_material_za_zavitem-2*D03_tolerance_zavitu-D01_material_za_zavitem-2)/2+D04_konenektor_y/2,-0.01])
+cube([D04_konenektor_x,D04_konenektor_y,18],true);
+//dotvoření otvoru
+//pro nasunutí ve spodní části
+ translate([0,-(S01_prumer_zavitu-D01_material_za_zavitem-2*D03_tolerance_zavitu-D01_material_za_zavitem)/2,-0.01])
+cube([D04_konenektor_x,D04_konenektor_y,18],true);
+ translate([0,-(S01_prumer_zavitu-D01_material_za_zavitem-2*D03_tolerance_zavitu-D01_material_za_zavitem)/2,D04_sila_materialu_na_konektor+D01_material_pod_zavitem/2])
+cube([D04_konenektor_x+6,D04_konenektor_y,D01_material_pod_zavitem],true);
+}
+translate([0,7,(15+5.08)/2+D04_sila_materialu_na_konektor])
+difference()
+        {
+cube([10.16+2*D03_tloustka_materialu,3+2*D03_tloustka_materialu,15+5.08],true);
+translate([0,0,(15+5.08)/2-(5.08+3.3+2)/2])
+cube([10.16,3,5.08+3.3+2],true);
+            translate([0,15,(15+5.08)/2-(3.3)/2-2])
+            rotate ([90,0,0])
+            cylinder (h = 30, r=(3.3/2), $fn=100);
+            }
+}

/Modules/Mechanical/AWSCREEN01A/CAD/SRC/AWSCREEN01A_D05.scad
8,7 → 8,7



module AWSCREEN01A_D05(S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,D01_material_pod_zavitem,D01_material_za_zavitem,D01_material_pred_zavitem,D01_delka_tyce,D01_sirka_tyce,D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu)
module AWSCREEN01A_D05(S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,D01_material_pod_zavitem,D01_material_za_zavitem,D01_material_pred_zavitem,D01_delka_tyce,D01_sirka_tyce,D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu,D03_tolerance_zavitu)
{

difference()
15,15 → 15,31
{

union()
{
{
//výstuha
//translate ([0,0,-D03_tloustka_materialu/2])
rotate ([0,-90,0])
linear_extrude (height = D03_tloustka_materialu, convexity = 10)
polygon(points=[[D02_vyska_uchytky/2,D01_delka_tyce+S01_prumer_zavitu/2+D01_material_pred_zavitem+D02_sila_materialu],[0, D01_delka_tyce+S01_prumer_zavitu/2+D01_material_pred_zavitem+D02_sila_materialu],[0,D03_polomer_stitu+D01_material_pred_zavitem],[D01_material_pod_zavitem,D03_polomer_stitu+D01_material_pred_zavitem]]);


//zavit
translate([0,0,D01_material_pod_zavitem])
screw_thread(S01_prumer_zavitu-0.5,4,55,S01_vyska_komponentu_na_lozisko,PI/2,2);
screw_thread(S01_prumer_zavitu-2*D03_tolerance_zavitu,4,55,S01_vyska_komponentu_na_lozisko,PI/2,2);


difference()
{
//spodní valec
translate([0,0,D01_material_pod_zavitem/2])
cylinder (h = D01_material_pod_zavitem, r=(S01_prumer_zavitu+D01_material_pred_zavitem*2)/2, center = true, $fn=100);

translate([0,0,-4])
screw_thread(S01_prumer_zavitu-D01_material_za_zavitem,4,55,D01_material_pod_zavitem+8,PI/2,2);


}

//uchyt na tyc
translate([0,D01_delka_tyce/2+S01_prumer_zavitu/2+D01_material_pred_zavitem,D01_material_pod_zavitem/2])
cube([D01_sirka_tyce,D01_delka_tyce,D01_material_pod_zavitem],center=true);
53,13 → 69,15
}

//otvor
translate([0,0,(D01_material_pod_zavitem+S01_vyska_komponentu_na_lozisko)/2])
cylinder (h = D01_material_pod_zavitem+S01_vyska_komponentu_na_lozisko+0.02, r=(S01_prumer_zavitu-2*D01_material_za_zavitem)/2, center = true, $fn=100);
translate([0,0,D01_material_pod_zavitem+S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+0.02, r=(S01_prumer_zavitu-2*D03_tolerance_zavitu-D01_material_za_zavitem)/2, center = true, $fn=100);



}
}

AWSCREEN01A_D05(S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,D01_material_pod_zavitem,D01_material_za_zavitem,D01_material_pred_zavitem,D01_delka_tyce,D01_sirka_tyce,D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu);
AWSCREEN01A_D05(S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,D01_material_pod_zavitem,D01_material_za_zavitem,D01_material_pred_zavitem,D01_delka_tyce,D01_sirka_tyce,D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu,D03_tolerance_zavitu);

 /Modules/Mechanical/AWSCREEN01A/CAD/assembly.scad
 ,7 → 7,7
 include <configuration.scad>
-barva_D01 = "yellow";
 barva_D02 = "cyan";
 barva_D03 = "yellow";
 barva_D04 = "green";
 ,8 → 17,11
-posunuti_dilu=10; //posunuti dilu od sebe
+posunuti_dilu=0; //posunuti dilu od sebe
+difference()
+        {
+union()
+        {
 //AWSCREEN01A_D05  DRŽÁK
 //-------------------------------------------------------------
 //-------------------------------------------------------------
 ,7 → 28,7
 color(barva_D05)
     translate([0,0,0])
-        AWSCREEN01A_D05(S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,D01_material_pod_zavitem,D01_material_za_zavitem,D01_material_pred_zavitem,D01_delka_tyce,D01_sirka_tyce,D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu);
+        AWSCREEN01A_D05(S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,D01_material_pod_zavitem,D01_material_za_zavitem,D01_material_pred_zavitem,D01_delka_tyce,D01_sirka_tyce,D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu,D03_tolerance_zavitu);
 //AWSCREEN01A_D06  DRŽÁK druhy dil
 ,26 → 40,38
         AWSCREEN01A_D06(D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu);
-//AWSCREEN01A_D04  stator velky dil
+//AWSCREEN01A_D04 uchyt na senzor
 //-------------------------------------------------------------
 //-------------------------------------------------------------
-color(barva_D04)
-    translate([0,0,D01_material_pod_zavitem+2*posunuti_dilu])
-AWSCREEN01A_D04(D03_vyska_zavitu,D03_tolerance_zavitu,D03_material_za_zavitem,D03_polomer_zavitu,D03_polomer_stitu,D03_tloustka_materialu,D03_vyska_stitu,D03_pocet_vyztuh,screen_bevel,D04_vyska_na_elektroniku,D04_vyska_zavitu,D04_vyska_zavitu_pro_drzak_elektorniky);
+ color(barva_D04)
+    translate([0,0,-D04_sila_materialu_na_konektor-2*posunuti_dilu])
+          AWSCREEN01A_D04();
-//AWSCREEN01A_D03
+//AWSCREEN01A_D03 klasicky dil
 //-------------------------------------------------------------
 //-------------------------------------------------------------
 color(barva_D03)
-    translate([0,0,D04_vyska_zavitu+D04_vyska_na_elektroniku+D01_material_pod_zavitem+4*posunuti_dilu])
+    translate([0,0,D01_material_pod_zavitem+4*posunuti_dilu])
           AWSCREEN01A_D03(D03_vyska_zavitu,D03_tolerance_zavitu,D03_material_za_zavitem,D03_polomer_zavitu,D03_polomer_stitu,D03_tloustka_materialu,D03_vyska_stitu,D03_pocet_vyztuh,screen_bevel);
 color(barva_D03)
-    translate([0,0,D04_vyska_zavitu+D04_vyska_na_elektroniku+D01_material_pod_zavitem+6*posunuti_dilu+D03_vyska_stitu])
+    translate([0,0,D01_material_pod_zavitem+D03_vyska_stitu+5*posunuti_dilu])
-          AWSCREEN01A_D03(D03_vyska_zavitu,D03_tolerance_zavitu,D03_material_za_zavitem,D03_polomer_zavitu,D03_polomer_stitu,D03_tloustka_materialu,D03_vyska_stitu,D03_pocet_vyztuh,screen_bevel);
+          AWSCREEN01A_D03(D03_vyska_zavitu,D03_tolerance_zavitu,D03_material_za_zavitem,D03_polomer_zavitu,D03_polomer_stitu,D03_tloustka_materialu,D03_vyska_stitu,D03_pocet_vyztuh,screen_bevel);
+ //AWSCREEN01A_D02 zakoncovaci dil
+//-------------------------------------------------------------
+//-------------------------------------------------------------
+ color(barva_D02)
+    translate([0,0,D01_material_pod_zavitem+2*D03_vyska_stitu+6*posunuti_dilu])
+          AWSCREEN01A_D02(D03_vyska_zavitu,D03_tolerance_zavitu,D03_material_za_zavitem,D03_polomer_zavitu,D03_polomer_stitu,D03_tloustka_materialu,D03_vyska_stitu,D03_pocet_vyztuh,screen_bevel);
+ }
+//prurez
+ translate([-D03_polomer_stitu,-D03_polomer_stitu,0])
+    cube([D03_polomer_stitu*2,D03_polomer_stitu,3*D03_polomer_stitu],false);
+ }

/Modules/Mechanical/AWSCREEN01A/CAD/configuration.scad
9,8 → 9,8
D03_vyska_zavitu=5;
D03_tolerance_zavitu=0.75; //tolerance s poloměru
D03_material_za_zavitem=2;
D03_polomer_zavitu=15;
D03_polomer_stitu=30;
D03_polomer_zavitu=22.5;
D03_polomer_stitu=37.5;
D03_tloustka_materialu=1.4;
D03_vyska_stitu=15;
D03_pocet_vyztuh=3;
18,17 → 18,17
PI=3.141592;

//AWSCREEN01A_D04
D04_vyska_na_elektroniku=2;
D04_vyska_zavitu=15;
D04_vyska_zavitu_pro_drzak_elektorniky=5;
D04_sila_materialu_na_konektor=3;
D04_konenektor_x=12.3;
D04_konenektor_y=19;

//AWSCREEN01A_D05 //uchyt velky
D01_material_pod_zavitem=10;
D01_material_pod_zavitem=5;
D01_material_za_zavitem=5;
D01_material_pred_zavitem=3;
D01_material_pred_zavitem=2;
D01_delka_tyce=40;
D01_sirka_tyce=20;
S01_vyska_komponentu_na_lozisko=D04_vyska_zavitu-D04_vyska_zavitu_pro_drzak_elektorniky;
D01_sirka_tyce=10;
S01_vyska_komponentu_na_lozisko=D03_vyska_zavitu;
S01_prumer_zavitu=2*D03_polomer_zavitu;

/Modules/Mechanical/AWSCREEN01A/CAD/print_data/P_AWSCREEN01A_D04.scad
5,6 → 5,6
rotate([0, 0, 0])


AWSCREEN01A_D04(D03_vyska_zavitu,D03_tolerance_zavitu,D03_material_za_zavitem,D03_polomer_zavitu,D03_polomer_stitu,D03_tloustka_materialu,D03_vyska_stitu,D03_pocet_vyztuh,screen_bevel,D04_vyska_na_elektroniku,D04_vyska_zavitu,D04_vyska_zavitu_pro_drzak_elektorniky);
AWSCREEN01A_D04();

/Modules/Mechanical/AWSCREEN01A/CAD/print_data/P_AWSCREEN01A_D05.scad
8,7 → 8,7

PI=3.141592;

AWSCREEN01A_D05(S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,D01_material_pod_zavitem,D01_material_za_zavitem,D01_material_pred_zavitem,D01_delka_tyce,D01_sirka_tyce,D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu);
AWSCREEN01A_D05(S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,D01_material_pod_zavitem,D01_material_za_zavitem,D01_material_pred_zavitem,D01_delka_tyce,D01_sirka_tyce,D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu,D03_tolerance_zavitu);

Subversion Repositories – MLAB

/Modules/Mechanical/AWSCREEN01A/CAD @ 4507 → /Modules/Mechanical/AWSCREEN01A/CAD @ 4508

Compare Path:	Rev
With Path:	Rev