/Modules/Mechanical/Boxes/AWSBOX01A/CAD/SRC/AWSBOX01A_D01.scad
0,0 → 1,47
$fn=40; // model faces resolution.
 
pocet_der1=5;
pocet_der2=6;
radidus_hrany=5;
vzdalenost_der=10.16;
vzdalenost_od_okraje=vzdalenost_der/2;
prumer_sroubu=3.4;
tloustka_plbase=2;
prekryti_der=-2;
 
plbase(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,tloustka_plbase,prekryti_der);
 
module plbase(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,tloustka_plbase,prekryti_der){
 
difference () {
//union () {
translate([radidus_hrany,radidus_hrany,0])
minkowski()
{
cube([(pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany,tloustka_plbase]); // base plastics brick
cylinder(r=radidus_hrany,h=0.1);
}
 
for (i = [0:1:pocet_der1-1]) {
for (a = [0:1:pocet_der2-1]) {
translate([vzdalenost_od_okraje+vzdalenost_der*i,vzdalenost_od_okraje+vzdalenost_der*a, (tloustka_plbase-prekryti_der)/2]) // center top screw
cylinder(((tloustka_plbase-prekryti_der)), d=prumer_sroubu, center=true);
}
}
translate([vzdalenost_od_okraje,vzdalenost_od_okraje, (tloustka_plbase/2)]) // center top screw
cylinder(((tloustka_plbase+0.3)), d=prumer_sroubu, center=true);
translate([vzdalenost_od_okraje+(pocet_der1-1)*vzdalenost_der,vzdalenost_od_okraje, (tloustka_plbase/2)]) // center top screw
cylinder(((tloustka_plbase+0.3)), d=prumer_sroubu, center=true);
 
translate([vzdalenost_od_okraje+(pocet_der1-1)*vzdalenost_der,vzdalenost_od_okraje+(pocet_der2-1)*vzdalenost_der, (tloustka_plbase/2)]) // center top screw
cylinder(((tloustka_plbase+0.3)), d=prumer_sroubu, center=true);
translate([vzdalenost_od_okraje,vzdalenost_od_okraje+(pocet_der2-1)*vzdalenost_der, (tloustka_plbase/2)]) // center top screw
cylinder(((tloustka_plbase+0.3)), d=prumer_sroubu, center=true);
}
}
/Modules/Mechanical/Boxes/AWSBOX01A/CAD/assembly.scad
0,0 → 1,77
use <SRC/AWSCREEN01A_D01.scad>
use <SRC/AWSCREEN01A_D02.scad>
use <SRC/AWSCREEN01A_D03.scad>
use <SRC/AWSCREEN01A_D04.scad>
use <SRC/AWSCREEN01A_D05.scad>
use <SRC/AWSCREEN01A_D06.scad>
 
include <configuration.scad>
 
 
barva_D02 = "cyan";
barva_D03 = "yellow";
barva_D04 = "green";
barva_D05 = "yellow";
barva_D06 = "cyan";
 
 
 
 
posunuti_dilu=0; //posunuti dilu od sebe
difference()
{
union()
{
//AWSCREEN01A_D05 DRŽÁK
//-------------------------------------------------------------
//-------------------------------------------------------------
color(barva_D05)
translate([0,0,0])
AWSCREEN01A_D05(S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,D01_material_pod_zavitem,D01_material_za_zavitem,D01_material_pred_zavitem,D01_delka_tyce,D01_sirka_tyce,D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu,D03_tolerance_zavitu);
//AWSCREEN01A_D06 DRŽÁK druhy dil
//-------------------------------------------------------------
//-------------------------------------------------------------
color(barva_D06)
translate([0,S01_prumer_zavitu/2+D01_material_pred_zavitem+D01_delka_tyce+D02_prumer_obruby/2+D02_sila_materialu+10,D02_vyska_uchytky/2])
rotate(a=[0,0,90])
AWSCREEN01A_D06(D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu);
//AWSCREEN01A_D04 uchyt na senzor
//-------------------------------------------------------------
//-------------------------------------------------------------
color(barva_D04)
translate([0,0,-D04_sila_materialu_na_konektor-2*posunuti_dilu])
AWSCREEN01A_D04();
//AWSCREEN01A_D03 klasicky dil
//-------------------------------------------------------------
//-------------------------------------------------------------
color(barva_D03)
translate([0,0,D01_material_pod_zavitem+4*posunuti_dilu])
AWSCREEN01A_D03(D03_vyska_zavitu,D03_tolerance_zavitu,D03_material_za_zavitem,D03_polomer_zavitu,D03_polomer_stitu,D03_tloustka_materialu,D03_vyska_stitu,D03_pocet_vyztuh,screen_bevel);
color(barva_D03)
translate([0,0,D01_material_pod_zavitem+D03_vyska_stitu+5*posunuti_dilu])
AWSCREEN01A_D03(D03_vyska_zavitu,D03_tolerance_zavitu,D03_material_za_zavitem,D03_polomer_zavitu,D03_polomer_stitu,D03_tloustka_materialu,D03_vyska_stitu,D03_pocet_vyztuh,screen_bevel);
 
//AWSCREEN01A_D02 zakoncovaci dil
//-------------------------------------------------------------
//-------------------------------------------------------------
color(barva_D02)
translate([0,0,D01_material_pod_zavitem+2*D03_vyska_stitu+6*posunuti_dilu])
AWSCREEN01A_D02(D03_vyska_zavitu,D03_tolerance_zavitu,D03_material_za_zavitem,D03_polomer_zavitu,D03_polomer_stitu,D03_tloustka_materialu,D03_vyska_stitu,D03_pocet_vyztuh,screen_bevel);
}
//prurez
translate([-D03_polomer_stitu,-D03_polomer_stitu,0])
cube([D03_polomer_stitu*2,D03_polomer_stitu,3*D03_polomer_stitu],false);
}
/Modules/Mechanical/Boxes/AWSBOX01A/CAD/configuration.scad
0,0 → 1,54
$fn=40; // model faces resolution.
 
//OBECNE PARAMETRY
//----------------------------------------------------------------
//----------------------------------------------------------------
 
 
//AWSCREEN01A_D03 -stredni díl
D03_vyska_zavitu=5;
D03_tolerance_zavitu=0.75; //tolerance s poloměru
D03_material_za_zavitem=2;
D03_polomer_zavitu=22.5;
D03_polomer_stitu=37.5;
D03_tloustka_materialu=1.1;
D03_vyska_stitu=15;
D03_pocet_vyztuh=3;
screen_bevel = 20;
PI=3.141592;
 
//AWSCREEN01A_D04
D04_sila_materialu_na_konektor=3;
D04_konenektor_x=12.3;
D04_konenektor_y=19;
D04_konenektor_z=5; //vyska krytu
D04_vyska_drzaku_senzoru=28;
 
 
//AWSCREEN01A_D05 //uchyt velky
D01_material_pod_zavitem=5;
D01_material_za_zavitem=3;
D01_material_pred_zavitem=2;
D01_delka_tyce=40;
D01_sirka_tyce=10;
S01_vyska_komponentu_na_lozisko=D03_vyska_zavitu;
S01_prumer_zavitu=2*D03_polomer_zavitu;
 
 
//AWSCREEN01A_D06 //uchyt na sloup
D02_sila_materialu=4;
D02_vyska_uchytky=40;
D02_prumer_obruby=27; //3/4 trubka
D02_delka_celeho_uchytu=70;
D02_dotahova_vzdalenost=1.5;
D02_prumer_uchytneho_sroubu=6.2;
D02_sirka_matky=9.2; //pro M4
D02_vyska_matky=3;