| 0,0 → 1,281 |
|---|
| $fn=40; // model faces resolution. |
| include <WINDGAUGE02A_D02.scad> |
| |
| //WINDGAUGE02A_D01 //uchyt velky |
| D01_material_pod_zavitem=5; |
| D01_material_za_zavitem=3; |
| D01_material_pred_zavitem=2; |
| D01_delka_tyce=60; |
| D01_sirka_tyce=10; |
| |
| //WINDGAUGE02A_D02 //uchyt na sloup |
| D02_sila_materialu=5; |
| D02_vyska_uchytky=40; |
| D02_prumer_obruby=27; //3/4 trubka |
| D02_delka_celeho_uchytu=60; |
| D02_dotahova_vzdalenost=1.5; |
| D02_prumer_uchytneho_sroubu=4.2; |
| D02_sirka_matky=9.2; //pro M4 |
| D02_vyska_matky=3; |
| |
| |
| pocet_der1=10; |
| pocet_der2=3; |
| radidus_hrany=5; |
| vzdalenost_der=10.16; |
| vzdalenost_od_okraje=vzdalenost_der/2; |
| prumer_sroubu=3.4; |
| tloustka_plbase=2; |
| prekryti_der=-2; |
| |
| D02_vyska_boxu_pod_plbase=6; |
| D02_vyska_boxu_nad_plbase=60; |
| D02_zapusteni_spodniho_krytu=10; |
| D02_sila_materialu=1.2; |
| D02_dolerance_na_zasunuti=0.4; //tolerance je pro obě strany |
| |
| drzak_sroubu_hloubka=15; |
| drzak_sroubu_vyska=10; |
| matka_vyska=3; |
| |
| |
| |
| |
| |
| plbase(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,tloustka_plbase,prekryti_der); |
| |
| module plbase(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,tloustka_plbase,prekryti_der){ |
| |
| difference () { |
| union () { |
| |
| //uchyt na sloup |
| translate([((pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje+2*radidus_hrany+2*D02_sila_materialu+D02_dolerance_na_zasunuti)/2,-D02_prumer_obruby/2-2.5-D02_dotahova_vzdalenost/2,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-1*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu-D02_vyska_uchytky/2]) |
| rotate([0,0,90]) |
| WINDGAUGE02A_D02(5); |
| |
| |
| translate([radidus_hrany,radidus_hrany,0]) |
| minkowski() |
| { |
| cube([(pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*D02_sila_materialu+D02_dolerance_na_zasunuti,D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase+2*D02_sila_materialu,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu]); // base plastics brick |
| cylinder(r=radidus_hrany,h=0.1); |
| } |
| |
| //válce |
| //vrchní zakulacení 1 |
| translate([((pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*D02_sila_materialu+D02_dolerance_na_zasunuti)/2+radidus_hrany,radidus_hrany,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu]) |
| |
| rotate([0,90,0]) |
| cylinder(h=(pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*D02_sila_materialu+D02_dolerance_na_zasunuti, r=radidus_hrany, center=true); |
| |
| //vrchní zakulacení 2 |
| translate([((pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*D02_sila_materialu+D02_dolerance_na_zasunuti)/2+radidus_hrany,radidus_hrany+D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase+2*D02_sila_materialu,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu]) |
| |
| rotate([0,90,0]) |
| cylinder(h=(pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*D02_sila_materialu+D02_dolerance_na_zasunuti, r=radidus_hrany, center=true); |
| |
| //vrchní zakulacení 3 |
| translate([radidus_hrany,radidus_hrany+(D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase+2*D02_sila_materialu)/2,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu]) |
| |
| rotate([0,90,90]) |
| cylinder(h=D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase+2*D02_sila_materialu, r=radidus_hrany, center=true); |
| |
| //vrchní zakulacení 4 |
| translate([radidus_hrany+(pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*D02_sila_materialu+D02_dolerance_na_zasunuti,radidus_hrany+(D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase+2*D02_sila_materialu)/2,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu]) |
| |
| rotate([0,90,90]) |
| cylinder(h=D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase+2*D02_sila_materialu, r=radidus_hrany, center=true); |
| |
| //zakulacení koule |
| //1 |
| translate([radidus_hrany+(pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*D02_sila_materialu+D02_dolerance_na_zasunuti,D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase+2*D02_sila_materialu+radidus_hrany,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu]) |
| |
| |
| sphere(d = 2*radidus_hrany, center=true, $fn=100); |
| |
| //2 |
| translate([radidus_hrany+(pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*D02_sila_materialu+D02_dolerance_na_zasunuti,radidus_hrany,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu]) |
| |
| |
| sphere(d = 2*radidus_hrany, center=true, $fn=100); |
| |
| //3 |
| translate([radidus_hrany,radidus_hrany,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu]) |
| |
| |
| sphere(d = 2*radidus_hrany, center=true, $fn=100); |
| |
| |
| |
| |
| //4 |
| translate([radidus_hrany,D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase+2*D02_sila_materialu+radidus_hrany,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu]) |
| |
| sphere(d = 2*radidus_hrany, center=true, $fn=100); |
| |
| |
| //vrchní kvádr |
| translate([radidus_hrany,radidus_hrany,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu]) |
| |
| cube([(pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*D02_sila_materialu+D02_dolerance_na_zasunuti,D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase+2*D02_sila_materialu,radidus_hrany]); |
| |
| } |
| |
| //odečet spodního kvádru |
| |
| translate([D02_sila_materialu+D02_dolerance_na_zasunuti+radidus_hrany,D02_sila_materialu+radidus_hrany,-0.005]) |
| minkowski() |
| { |
| cube([(pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany,D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu+0.01]); // base plastics brick |
| cylinder(r=radidus_hrany,h=0.1); |
| } |
| |
| //odečet vrchního kvádru |
| |
| translate([radidus_hrany,radidus_hrany,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu]) |
| |
| cube([(pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*D02_sila_materialu+D02_dolerance_na_zasunuti,D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase+2*D02_sila_materialu,radidus_hrany-D02_sila_materialu]); |
| |
| //válce odečet |
| //vrchní zakulacení 1 |
| translate([((pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*D02_sila_materialu+D02_dolerance_na_zasunuti)/2+radidus_hrany,radidus_hrany,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu]) |
| |
| rotate([0,90,0]) |
| cylinder(h=(pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*D02_sila_materialu+D02_dolerance_na_zasunuti, r=radidus_hrany-D02_sila_materialu, center=true); |
| |
| //vrchní zakulacení 2 |
| translate([((pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*D02_sila_materialu+D02_dolerance_na_zasunuti)/2+radidus_hrany,radidus_hrany+D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase+2*D02_sila_materialu,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu]) |
| |
| rotate([0,90,0]) |
| cylinder(h=(pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*D02_sila_materialu+D02_dolerance_na_zasunuti, r=radidus_hrany-D02_sila_materialu, center=true); |
| |
| //vrchní zakulacení 3 |
| translate([radidus_hrany,radidus_hrany+(D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase+2*D02_sila_materialu)/2,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu]) |
| |
| rotate([0,90,90]) |
| cylinder(h=D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase+2*D02_sila_materialu, r=radidus_hrany-D02_sila_materialu, center=true); |
| |
| //vrchní zakulacení 4 |
| translate([radidus_hrany+(pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*D02_sila_materialu+D02_dolerance_na_zasunuti,radidus_hrany+(D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase+2*D02_sila_materialu)/2,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu]) |
| |
| rotate([0,90,90]) |
| cylinder(h=D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase+2*D02_sila_materialu, r=radidus_hrany-D02_sila_materialu, center=true); |
| |
| //zakulacení koule odečet |
| //1 |
| translate([radidus_hrany+(pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*D02_sila_materialu+D02_dolerance_na_zasunuti,D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase+2*D02_sila_materialu+radidus_hrany,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu]) |
| |
| |
| sphere(d = 2*radidus_hrany-2*D02_sila_materialu, center=true, $fn=100); |
| |
| //2 |
| translate([radidus_hrany+(pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*D02_sila_materialu+D02_dolerance_na_zasunuti,radidus_hrany,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu]) |
| |
| |
| sphere(d = 2*radidus_hrany-2*D02_sila_materialu, center=true, $fn=100); |
| |
| //3 |
| translate([radidus_hrany,radidus_hrany,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu]) |
| |
| |
| sphere(d = 2*radidus_hrany-2*D02_sila_materialu, center=true, $fn=100); |
| |
| |
| |
| |
| //4 |
| translate([radidus_hrany,D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase+2*D02_sila_materialu+radidus_hrany,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany+D02_zapusteni_spodniho_krytu]) |
| |
| sphere(d = 2*radidus_hrany-2*D02_sila_materialu, center=true, $fn=100); |
| |
| } |
| //lišty na zasunutí plbase |
| translate([D02_sila_materialu,D02_sila_materialu+D02_vyska_boxu_pod_plbase-(2*D02_sila_materialu+tloustka_plbase+D02_dolerance_na_zasunuti)/2,D02_zapusteni_spodniho_krytu]) |
| |
| lista(); |
| |
| |
| translate([(pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje+2*D02_sila_materialu+D02_dolerance_na_zasunuti-D02_sila_materialu,D02_sila_materialu+D02_vyska_boxu_pod_plbase-(2*D02_sila_materialu+tloustka_plbase+D02_dolerance_na_zasunuti)/2+radidus_hrany,D02_zapusteni_spodniho_krytu]) |
| rotate([0,0,180]) |
| lista(); |
| |
| //drzáky spodního krytu |
| |
| translate([0,(D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase+2*D02_sila_materialu+2*radidus_hrany)/2-(prumer_sroubu+3*D02_sila_materialu)/2,D02_zapusteni_spodniho_krytu+matka_vyska]) |
| |
| drzak_sroubu(); |
| |
| |
| translate([(pocet_der1-1)*vzdalenost_der+2*vzdalenost_od_okraje+2*D02_sila_materialu+D02_dolerance_na_zasunuti,(D02_vyska_boxu_pod_plbase+D02_vyska_boxu_nad_plbase+2*D02_sila_materialu+2*radidus_hrany)/2+(prumer_sroubu+3*D02_sila_materialu)/2,D02_zapusteni_spodniho_krytu+matka_vyska]) |
| rotate([0,0,180]) |
| drzak_sroubu(); |
| } |
| |
| module lista(){ |
| translate([0,0,D02_sila_materialu]) |
| difference () { |
| |
| union () { |
| cube([D02_sila_materialu,2*D02_sila_materialu+tloustka_plbase+D02_dolerance_na_zasunuti,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany-2*D02_sila_materialu]); |
| |
| |
| translate([0,(2*D02_sila_materialu+tloustka_plbase+D02_dolerance_na_zasunuti)/2,0]) |
| |
| rotate([0,90,90]) |
| cylinder(h=2*D02_sila_materialu+tloustka_plbase+D02_dolerance_na_zasunuti, r=D02_sila_materialu, center=true); |
| |
| //vrchni zakulaceni |
| translate([0,(2*D02_sila_materialu+tloustka_plbase+D02_dolerance_na_zasunuti)/2,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany-2*D02_sila_materialu]) |
| rotate([0,90,90]) |
| cylinder(h=2*D02_sila_materialu+tloustka_plbase+D02_dolerance_na_zasunuti, r=D02_sila_materialu, center=true); |
| } |
| |
| |
| translate([0,D02_sila_materialu,-D02_sila_materialu]) |
| cube([D02_sila_materialu,tloustka_plbase+D02_dolerance_na_zasunuti,(pocet_der2-1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*radidus_hrany-D02_sila_materialu]); |
| |
| } |
| |
| |
| } |
| |
| |
| module drzak_sroubu(){ |
| translate([0,0,0]) |
| difference () { |
| |
| union () { |
| //spodní kvádr |
| cube([drzak_sroubu_hloubka,prumer_sroubu+3*D02_sila_materialu,drzak_sroubu_vyska]); |
| |
| |
| //vrchní kuzel |
| |
| translate([0,(prumer_sroubu+3*D02_sila_materialu)/2,drzak_sroubu_vyska]) |
| cylinder(h=drzak_sroubu_vyska, r1=drzak_sroubu_hloubka, r2=0, center=false); |
| } |
| |
| //otvor na šroub |
| translate([drzak_sroubu_hloubka-prumer_sroubu/2-1.5*D02_sila_materialu,(prumer_sroubu+3*D02_sila_materialu)/2,-0.001]) |
| cylinder(h=3*drzak_sroubu_vyska, r=prumer_sroubu/2, center=false); |
| |
| //odstranění kužele |
| difference () { |
| translate([-3/2*drzak_sroubu_hloubka,-3/2*drzak_sroubu_hloubka,0]) |
| |
| cube([3*drzak_sroubu_hloubka,3*drzak_sroubu_hloubka,3*drzak_sroubu_vyska]); |
| |
| cube([drzak_sroubu_hloubka,prumer_sroubu+3*D02_sila_materialu,3*drzak_sroubu_vyska]); |
| |
| |
| |
| |
| } |
| |
| } |
| } |
| |
| |
| |
| |