Problem with comparison.
| /Modules/Mechanical/Boxes/BASEBOX02A/CAD/assembly.scad |
|---|
| 0,0 → 1,50 |
| use <src/sloupek.scad> |
| use <src/plbase.scad> |
| use <src/bocnice.scad> |
| use <src/spodni_kryt.scad> |
| use <src/otvory.scad> |
| use <src/text/Write.scad> |
| use <upravena_bocnice.scad> |
| include <src/manufactury_conf.scad> |
| include <configuration.scad> |
| include <src/otvory_conf.scad> |
| barva_dno_bocnice = "cyan"; |
| barva_spodni_kryt = "green"; |
| barva_plbase_horni = "yellow"; |
| posuv_dilu=0; //pro složeni krabičky zadat 0 pro rozebrání zdat 10 |
| //BOCNICE SE DNEM |
| //------------------------------------------------------------- |
| color(barva_dno_bocnice) |
| upravena_bocnice(); |
| //PLBASE HORNI |
| //------------------------------------------------------------- |
| translate([0,0,5*posuv_dilu]) |
| color(barva_plbase_horni) |
| translate([0,0,vyska_bocnice/2-tloustka_plbase/2]) |
| rotate(a=[0,0,0]) |
| { |
| plbase_vrchni_kryt_pro_odecet(pocet_der1-1,pocet_der2-1,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice,plbase_tolerance_horni,tloustka_plbase); |
| } |
| //SPODNÍ KRYT |
| //------------------------------------------------------------- |
| translate([0,0,-5*posuv_dilu]) |
| color(barva_spodni_kryt) |
| translate([0,0,-vyska_bocnice/2-2*tloustka_plbase]) |
| spodni_kryt(pocet_der1-1,pocet_der2-1,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice); |