| /Modules/Mechanical/ISLHOLDER01A/CAD/SRC/ISLHOLDER01A_D05.scad |
|---|
| 24,6 → 24,10 |
| translate([0,D05_prumer_zkumavky_vnitrni/4,D05_vyska_podstavce/2]) |
| cube([D05_sirka_otvoru_na_kabel,D05_prumer_zkumavky_vnitrni/2,D05_vyska_podstavce+0.11],true); |
| rotate ([0,0,180]) |
| translate([0,D05_prumer_zkumavky_vnitrni*1/4,D05_vyska_podstavce/2]) |
| cube([D05_sirka_otvoru_na_kabel,D05_prumer_zkumavky_vnitrni/4,D05_vyska_podstavce+0.11],true); |
| } |
| } |
| /Modules/Mechanical/ISLHOLDER01A/CAD/SRC/ISLHOLDER01A_D06.scad |
|---|
| 0,0 → 1,23 |
| $fn=40; // model faces resolution. |
| include <../configuration.scad> |
| //Ucpávka |
| module ISLHOLDER01A_D06() |
| { |
| difference() |
| { |
| cylinder (h = D05_vyska_podstavce, r=D05_prumer_zkumavky_vnitrni/2, $fn=100); |
| translate([0,D05_prumer_zkumavky_vnitrni/4,D05_vyska_podstavce/2]) |
| cube([D05_sirka_otvoru_na_kabel,D05_prumer_zkumavky_vnitrni/2,D05_vyska_podstavce+0.11],true); |
| } |
| } |
| ISLHOLDER01A_D06(); |
| /Modules/Mechanical/ISLHOLDER01A/CAD/configuration.scad |
|---|
| 20,7 → 20,8 |
| //D02 - uchyt na sloup |
| D02_sila_materialu=5; |
| D02_vyska_uchytky=40; |
| D02_prumer_obruby=27; //3/4 trubka |
| D02_prumer_obruby=32; |
| //27mm - 3/4 trubka |
| D02_delka_celeho_uchytu=60; |
| D02_dotahova_vzdalenost=1.5; |
| D02_prumer_uchytneho_sroubu=4.2; |
| 28,7 → 29,7 |
| D02_vyska_matky=3; |
| D05_vyska_drzaku_senzoru=35; |
| D05_vyska_drzaku_senzoru=15; |
| D05_prumer_zkumavky_vnitrni=21.4; |
| D05_vyska_podstavce=10; |
| D05_sirka_otvoru_na_kabel=5; |
| /Modules/Mechanical/ISLHOLDER01A/CAD/configuration2.scad |
|---|
| 20,7 → 20,7 |
| //D04 - uchyt na sloup |
| D02_sila_materialu=4; |
| D02_vyska_uchytky=30; |
| D02_prumer_obruby=24.2; //pruměr zkumavky |
| D02_prumer_obruby=25; //pruměr zkumavky |
| D02_delka_celeho_uchytu=50; |
| D02_dotahova_vzdalenost=1.5; |
| D02_prumer_uchytneho_sroubu=4.2; |
| /Modules/Mechanical/ISLHOLDER01A/CAD/print_data/P_ISLHOLDER01A_D02.scad |
|---|
| 2,8 → 2,8 |
| include <../configuration.scad> |
| use <../SRC/ISLHOLDER01A_D02.scad> |
| rotate([0, -90, 0]) |
| translate([-D02_dotahova_vzdalenost,0,0]) |
| rotate([0, 0, 0]) |
| translate([0,0,D02_vyska_uchytky/2]) |
| ISLHOLDER01A_D02(); |
| /Modules/Mechanical/ISLHOLDER01A/CAD/print_data/P_ISLHOLDER01A_D04.scad |
|---|
| 2,8 → 2,8 |
| include <../configuration2.scad> |
| use <../SRC/ISLHOLDER01A_D04.scad> |
| rotate([0, -90, 0]) |
| translate([-D02_dotahova_vzdalenost,0,0]) |
| rotate([0, 0, 0]) |
| translate([0,0,D02_vyska_uchytky/2]) |
| ISLHOLDER01A_D04(); |
| /Modules/Mechanical/ISLHOLDER01A/CAD/print_data/P_ISLHOLDER01A_D06.scad |
|---|
| 0,0 → 1,9 |
| $fn=100; // model faces resolution. |
| include <../configuration2.scad> |
| use <../SRC/ISLHOLDER01A_D06.scad> |
| rotate([0, 0, 0]) |
| translate([0,0,0]) |
| ISLHOLDER01A_D06(); |