/Modules/Mechanical/PLBASE1115/CAD/src/PLBASE1115.scad
0,0 → 1,51
 
pedestal_height = 2; // designed for use the MLAB standard 12mm screws.
mount_hole = 3.5;
clear = 0.175;
 
MLAB_grid_xoffset = 3.88;
MLAB_grid_yoffset = 4.2;
MLAB_grid = 10.16;
 
legs_height = 5;
 
$fn=20;
 
difference () {
minkowski()
{
cube([150,110,pedestal_height]); // base plastics brick
cylinder(r=5,h=0.1);
}
// MLAB grid holes
grid_list = [for (j = [MLAB_grid_xoffset : MLAB_grid: 150], i = [MLAB_grid_yoffset :MLAB_grid: 110]) [j, i] ];
for (j = grid_list) {
translate (concat(j, [0]))
cylinder (h = 2*pedestal_height, r= mount_hole/2);
}
}
 
translate ([MLAB_grid_xoffset, MLAB_grid_yoffset, 2])
difference () {
cylinder(r=MLAB_grid/2 + 0.3,h=legs_height);
cylinder(r=MLAB_grid/2 - 0.3,h=legs_height);
}
 
translate ([MLAB_grid_xoffset + 14*MLAB_grid, MLAB_grid_yoffset, 2])
difference () {
cylinder(r=MLAB_grid/2 + 0.3,h=legs_height);
cylinder(r=MLAB_grid/2 - 0.3,h=legs_height);
}
 
 
translate ([MLAB_grid_xoffset + 14*MLAB_grid, MLAB_grid_yoffset + 10*MLAB_grid, 2])
difference () {
cylinder(r=MLAB_grid/2 + 0.3,h=legs_height);
cylinder(r=MLAB_grid/2 - 0.3,h=legs_height);
}
 
translate ([MLAB_grid_xoffset, MLAB_grid_yoffset + 10*MLAB_grid, 2])
difference () {
cylinder(r=MLAB_grid/2 + 0.3,h=legs_height);
cylinder(r=MLAB_grid/2 - 0.3,h=legs_height);
}
/Modules/Mechanical/PLBASE1115/CAD/src/slic3r_config.ini
0,0 → 1,128
# generated by Slic3r 1.2.7-dev on Tue Feb 10 11:35:09 2015
avoid_crossing_perimeters = 0
bed_shape = 0x0,180x0,180x180,0x180
bed_temperature = 90
before_layer_gcode =
bottom_solid_layers = 3
bridge_acceleration = 1000
bridge_fan_speed = 0
bridge_flow_ratio = 1
bridge_speed = 10
brim_width = 0
complete_objects = 0
cooling = 1
default_acceleration = 500
disable_fan_first_layers = 0
dont_support_bridges = 1
duplicate_distance = 6
end_gcode = M104 S0 ; turn off nozzle\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nG1 Y170 F3000 ; move the print to the front\nM84 ; disable motors\n
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 90%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0
fan_always_on = 0
fan_below_layer_time = 5
filament_diameter = 1.75
fill_angle = 45
fill_density = 25%
fill_pattern = line
first_layer_acceleration = 500
first_layer_bed_temperature = 90
first_layer_extrusion_width = 200%
first_layer_height = 0.3
first_layer_speed = 60%
first_layer_temperature = 225
gap_fill_speed = 20
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 500
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 60
interface_shells = 0
layer_gcode =
layer_height = 0.3
max_fan_speed = 100
min_fan_speed = 50
min_print_speed = 15
min_skirt_length = 0
notes =
nozzle_diameter = 0.4
octoprint_apikey = B14197D3716442D4B0BB8F485877E31E
octoprint_host = 192.168.1.106:5000
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 500
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 45
perimeters = 2
post_process =
pressure_advance = 0
raft_layers = 0
resolution = 0
retract_before_travel = 2
retract_layer_change = 1
retract_length = 1.3
retract_length_toolchange = 3
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 60
seam_position = aligned
skirt_distance = 5
skirt_height = 1
skirts = 1
slowdown_below_layer_time = 20
small_perimeter_speed = 30
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 55
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = G28 ; home all axes\nG92 E0.0 ; reset extruder
support_material = 0
support_material_angle = 0
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 60
support_material_threshold = 0
temperature = 225
thin_walls = 1
threads = 4
toolchange_gcode =
top_infill_extrusion_width = 0
top_solid_infill_speed = 50
top_solid_layers = 3
travel_speed = 130
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
vibration_limit = 0
wipe = 0
xy_size_compensation = 0
z_offset = 0