Subversion Repositories – MLAB

/Modules/Mechanical/WINDGAUGE01A/CAD/ @ 4537   →   /Modules/Mechanical/WINDGAUGE01A/CAD/ @ 4538

Compare Path:	Rev
With Path:	Rev

/Modules/Mechanical/WINDGAUGE01A/CAD/SRC/WINDGAUGE01A_D01.scad
1,7 → 1,7
$fn=40; // model faces resolution.
include <../configuration.scad>
include <WINDGAUGE02A_D02.scad>
include <WINDGAUGE01A_D02.scad>
include <polyScrewThread_r1.scad>
PI=3.141592;
8,7 → 8,7
//Držák anemometru
module WINDGAUGE02A_D01()
module WINDGAUGE01A_D01()
{
difference()
{
49,7 → 49,7
//uchyt na sloupek
translate([0,D01_delka_tyce+(S01_prumer_vnitrni-S01_tolerance_zavit)/2+D01_material_pred_zavitem+D02_sila_materialu+(D02_prumer_obruby)/2,D02_vyska_uchytky/2])
rotate(a=[0,0,270])
WINDGAUGE02A_D02();
WINDGAUGE01A_D02();
}
60,7 → 60,7
}
}
WINDGAUGE02A_D01();
WINDGAUGE01A_D01();

/Modules/Mechanical/WINDGAUGE01A/CAD/SRC/WINDGAUGE01A_D02.scad
4,7 → 4,7
//Drzak na sloup - cast bez drzaku anemometru
module WINDGAUGE02A_D02(){
module WINDGAUGE01A_D02(){
difference()
{

/Modules/Mechanical/WINDGAUGE01A/CAD/SRC/WINDGAUGE01A_R01.scad
1,130 → 1,40
$fn=40; // model faces resolution.
$fn=100; // model faces resolution.
include <../configuration.scad>
include <polyScrewThread_r1.scad>
PI=3.141592;
WINDGAUGE01A_R01();
//Model lopatky
module WINDGAUGE01A_R01()
{
difference()
{
union()
{
//koule vrchní - kryt
translate([0,0,R01_vyska_preryti_statoru])
sphere(d = (S01_prumer_vnitrni/2+5*S01_sila_materialu)*2, $fn=100);
//spodní válec
cylinder (h = R01_vyska_preryti_statoru, r=S01_prumer_vnitrni/2+5*S01_sila_materialu, $fn=100);
//lopatka 1
translate([L01_hrana_drzaku_a/2,-(S01_prumer_vnitrni/2+2*S01_sila_materialu+L01_delka_uchytu+L01_prumer_lopatky/2),0])
lopatka();
//lopatka 2
rotate([0, 0, 120])
translate([L01_hrana_drzaku_a/2,-(S01_prumer_vnitrni/2+2*S01_sila_materialu+L01_delka_uchytu+L01_prumer_lopatky/2),0])
lopatka();
//lopatka 3
rotate([0, 0, 240])
translate([L01_hrana_drzaku_a/2,-(S01_prumer_vnitrni/2+2*S01_sila_materialu+L01_delka_uchytu+L01_prumer_lopatky/2),0])
lopatka();
}
//Odečet spodního válce
translate([0,0,-(S01_prumer_vnitrni/2+2*S01_sila_materialu)])
cylinder (h = R01_vyska_preryti_statoru+(S01_prumer_vnitrni/2+2*S01_sila_materialu), r=S01_prumer_vnitrni/2+4*S01_sila_materialu, $fn=100);
//odecet koule
translate([0,0,R01_vyska_preryti_statoru])
sphere(d = (S01_prumer_vnitrni/2+4*S01_sila_materialu)*2, $fn=100);
}
translate([0,0,R01_zavit_vyska+1])
difference()
{
//kužel
cylinder(h=10, r1=R03_prumer_zavitu/2+S01_sila_materialu, r2=5, center=false, $fn=100);
cylinder(h=10-2*S01_sila_materialu, r1=R03_prumer_zavitu/2, r2=5-S01_sila_materialu, center=false,$fn=100);
difference()
{
union()
{
//závit na ukotvení rotoru
//zakladni material
cylinder (h = (S01_prumer_vnitrni/2+2*S01_sila_materialu)+R01_vyska_preryti_statoru, r=(lozisko_prumer_vnejsi/2-1), $fn=100);
vyztuhy();
}
//vnitrni zavit
translate([0,0,-5])
screw_thread((11),3,55,R01_vyska_preryti_statoru+10,PI/2,2);
//za závitem aby to slo tisknout
translate([0,0,R01_vyska_preryti_statoru+5])
cylinder(h=(5), r1=(11)/2, r2=0, center=false, $fn=100);
}
}
module vyztuhy()
{
difference()
{
translate([0,0,R01_vyska_preryti_statoru])
cylinder(h=(S01_prumer_vnitrni/2+4*S01_sila_materialu), r1=(lozisko_prumer_vnejsi/2-1), r2=(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+4*S01_sila_materialu)-R01_vyska_preryti_statoru, center=false, $fn=100);
//vykousnutí 1
translate([S01_sila_materialu/2,S01_sila_materialu/2,R01_vyska_preryti_statoru-0.005])
cube([(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+4*S01_sila_materialu),(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+4*S01_sila_materialu),(S01_prumer_vnitrni/2+4*S01_sila_materialu)+0.01],center=false);
difference()
{
//válec na závit
cylinder (h = R01_zavit_vyska+1, r=R03_prumer_zavitu/2+S01_sila_materialu, $fn=100);
//odečet závitu
translate([0,0,-10])
screw_thread((R03_prumer_zavitu),S01_hloubka_zavitu,55,R01_zavit_vyska+12,PI/2,2);
//vykousnutí 2
rotate([0, 0, 90])
translate([S01_sila_materialu/2,S01_sila_materialu/2,R01_vyska_preryti_statoru-0.005])
cube([(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+4*S01_sila_materialu),(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+4*S01_sila_materialu),(S01_prumer_vnitrni/2+4*S01_sila_materialu)+0.01],center=false);
//vykousnutí 3
rotate([0, 0, 180])
translate([S01_sila_materialu/2,S01_sila_materialu/2,R01_vyska_preryti_statoru-0.005])
cube([(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+4*S01_sila_materialu),(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+4*S01_sila_materialu),(S01_prumer_vnitrni/2+4*S01_sila_materialu)+0.01],center=false);
//vykousnutí 4
rotate([0, 0, 270])
translate([S01_sila_materialu/2,S01_sila_materialu/2,R01_vyska_preryti_statoru-0.005])
cube([(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+4*S01_sila_materialu),(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+4*S01_sila_materialu),(S01_prumer_vnitrni/2+4*S01_sila_materialu)+0.01],center=false);
difference()
{
translate([0,0,R01_vyska_preryti_statoru])
sphere(d = (S01_prumer_vnitrni/2+12*S01_sila_materialu)*2, $fn=100);
translate([0,0,R01_vyska_preryti_statoru])
sphere(d = (S01_prumer_vnitrni/2+3*S01_sila_materialu)*2, $fn=100);
}
}
}
}
module lopatka()
{
difference()
{
union()
{
translate([0,0,L01_prumer_lopatky/2])
sphere(d = L01_prumer_lopatky, $fn=100);
translate([-L01_hrana_drzaku_a,0,0])
cube([L01_hrana_drzaku_a,L01_delka_uchytu+L01_prumer_lopatky/2+10,L01_hrana_drzaku_b],center=false);
//podpěra
translate([0,0,0])
cylinder(h=(L01_prumer_lopatky/2), r1=L01_prumer_lopatky/3.5, r2=L01_prumer_lopatky/2, center=false, $fn=100);
}
translate([0,0,L01_prumer_lopatky/2])
sphere(d = L01_prumer_lopatky-L01_sila_materialu_lopatky*2, $fn=100);
translate([0,-L01_prumer_lopatky,0])
cube([L01_prumer_lopatky+0.01,2*(L01_delka_uchytu+L01_prumer_lopatky/2+10),L01_prumer_lopatky],center=false);
}
//válec pro držení PCB
cylinder (h = R01_zavit_vyska+10, r=2, $fn=100);
}

/Modules/Mechanical/WINDGAUGE01A/CAD/SRC/WINDGAUGE01A_R02.scad
5,27 → 5,103
//Drzak rotoru se závitem
WINDGAUGE02A_R02();
module WINDGAUGE02A_R02()
WINDGAUGE01A_R02();
module WINDGAUGE01A_R02()
{
difference()
{
union()
{
//setihrana matice
//kužel na závit
cylinder(h=R02_zavit_vyska, r1=S01_prumer_vnitrni/2+5*S01_sila_materialu, r2=R03_prumer_zavitu/2+S01_sila_materialu, center=false,$fn=100);
//křídlo
translate([0,R02_vyska_kridla+R03_prumer_zavitu/2+S01_sila_materialu,0])
rotate([0, 90, 0])
difference()
{
union()
{
//závit
screw_thread((11-S01_tolerance_zavit),3,55,R01_vyska_preryti_statoru,PI/2,2);
//spodní podložka
translate([0,0,-R01_mezera_mezi_statorem_rotorem/2])
cylinder (h = R01_mezera_mezi_statorem_rotorem, r=(lozisko_prumer_vnitrni+2*lozisko_prekryv+2)/2, center = true, $fn=100);
}
//otvor
translate([0,0,-R01_mezera_mezi_statorem_rotorem-0.05])
cylinder (h = R01_vyska_preryti_statoru+R01_mezera_mezi_statorem_rotorem+0.1, r=prumer_osicky/2, $fn=100);
{
//zakladní materiál
translate([0,0,0])
cylinder (h = S01_sila_materialu, r=R02_vyska_kridla, $fn=100);
translate([-R02_vyska_kridla,0,-0.01])
cube([R02_vyska_kridla,R02_vyska_kridla,S01_sila_materialu+0.02],center=false);
translate([0,-R02_vyska_kridla,-0.01])
cube([R02_vyska_kridla,R02_vyska_kridla,S01_sila_materialu+0.02],center=false);
translate([0,0,-0.01])
cube([R02_vyska_kridla,R02_vyska_kridla,S01_sila_materialu+0.02],center=false);
translate([-R02_vyska_kridla,-R03_prumer_zavitu/2-S01_sila_materialu+3,-0.01])
cube([R02_vyska_kridla,R02_vyska_kridla,S01_sila_materialu+0.02],center=false);
}
}
//kvádr pod tyčí
translate([-R02_hrana_drzaku/2,-(R02_delka_vyrovnnavaci_tyce+R03_prumer_zavitu/2+S01_sila_materialu),0])
cube([R02_hrana_drzaku,R02_delka_vyrovnnavaci_tyce+R03_prumer_zavitu/2+S01_sila_materialu,R02_sila_materialu_pod_tyci],center=false);
//prední tyč
translate([0,0,5])
rotate([-90, 0, 180])
difference()
{
translate([0,0,0])
cylinder (h = R02_delka_vyrovnnavaci_tyce+R03_prumer_zavitu/2+S01_sila_materialu, r=R02_hrana_drzaku/2, $fn=100);
translate([-R02_hrana_drzaku/2,0,-0.01])
cube([R02_hrana_drzaku,R02_hrana_drzaku,R02_delka_vyrovnnavaci_tyce+R03_prumer_zavitu/2+S01_sila_materialu+0.02],center=false);
}
}
//spodní tyč pod křídlem
translate([-R02_hrana_drzaku/2,0,0])
cube([R02_hrana_drzaku,R02_delka_kridla+(S01_prumer_vnitrni/2+5*S01_sila_materialu)-R02_hrana_drzaku/2,S01_sila_materialu],center=false);
//zakulacení spodní tyče
translate([0,R02_delka_kridla+(S01_prumer_vnitrni/2+5*S01_sila_materialu)-R02_hrana_drzaku/2,0])
cylinder (h = S01_sila_materialu, r=R02_hrana_drzaku/2, $fn=100);
}
//odečet závitu
translate([0,0,-10])
screw_thread((R03_prumer_zavitu),S01_hloubka_zavitu,55,R04_zavit_vyska+R02_zavit_vyska+R01_zavit_vyska,PI/2,2);
//otvor na hlavu šroubu
translate([-(prumer_hlavy_sroubu+1)/2,-(R02_delka_vyrovnnavaci_tyce+R03_prumer_zavitu/2)+S01_sila_materialu,-0.01])
cube([prumer_hlavy_sroubu+1,vyska_hlavy_sroubu+1,R02_sila_materialu_pod_tyci+prumer_hlavy_sroubu/2+0.5],center=false);
//otvor na sroub - valec
translate([0,-(R02_delka_vyrovnnavaci_tyce+R03_prumer_zavitu/2)-(S01_sila_materialu)-0.01,R02_sila_materialu_pod_tyci])
rotate([-90, 0, 0])
cylinder (h = S01_sila_materialu+0.01, r=prumer_sroubu/2+0.2, $fn=100);
//otvor na sroub - valec pro zasunutí hlavy šroubu
translate([0,-(R02_delka_vyrovnnavaci_tyce+R03_prumer_zavitu/2)-0.01,R02_sila_materialu_pod_tyci])
rotate([-90, 0, 0])
cylinder (h = S01_sila_materialu+0.5, r=prumer_hlavy_sroubu/2+0.3, $fn=100);
//otvor pro vsunutí sroubu
translate([-(prumer_sroubu+0.2)/2,-(R02_delka_vyrovnnavaci_tyce+R03_prumer_zavitu/2)-S01_sila_materialu-0.01,-0.01])
cube([prumer_sroubu+0.2,2*S01_sila_materialu+0.2,R02_sila_materialu_pod_tyci],center=false);
}
}

/Modules/Mechanical/WINDGAUGE01A/CAD/SRC/WINDGAUGE01A_R04.scad
12,12 → 12,16
//závit
difference()
{
cylinder (h = R04_zavit_vyska+R04_zavit_vyska, r=R03_prumer_zavitu/2+S01_sila_materialu, $fn=100);
translate([0,0,-10])
screw_thread((R03_prumer_zavitu),S01_hloubka_zavitu,55,R04_zavit_vyska+R02_zavit_vyska+R01_zavit_vyska,PI/2,2);
}
union()
{
//materiál na závit
cylinder (h = R04_zavit_vyska, r=R03_prumer_zavitu/2+S01_sila_materialu, $fn=100);
//krycí válec
difference()
{
29,17 → 33,19
//Odečet spodního válce
translate([0,0,-0.005])
translate([0,0,S01_sila_materialu])
cylinder (h = R01_vyska_preryti_statoru+R04_zavit_vyska+0.01, r=S01_prumer_vnitrni/2+4*S01_sila_materialu, $fn=100);
}
}
translate([0,0,-10])
screw_thread((R03_prumer_zavitu),S01_hloubka_zavitu,55,R04_zavit_vyska+R02_zavit_vyska+R01_zavit_vyska,PI/2,2);
}
}

/Modules/Mechanical/WINDGAUGE01A/CAD/SRC/WINDGAUGE01A_S02.scad
6,9 → 6,9
//Hlavní válec
WINDGAUGE02A_S02();
WINDGAUGE01A_S02();
module WINDGAUGE02A_S02()
module WINDGAUGE01A_S02()
{
difference()
{

/Modules/Mechanical/WINDGAUGE01A/CAD/SRC/WINDGAUGE01A_S03.scad
6,7 → 6,7
//Držák na konektor RJ11
PI=3.141592;
module WINDGAUGE02A_S03()
module WINDGAUGE01A_S03()
{
difference()
{
25,5 → 25,5
WINDGAUGE02A_S03();
WINDGAUGE01A_S03();

/Modules/Mechanical/WINDGAUGE01A/CAD/assembly.scad
1,11 → 1,12
use <SRC/WINDGAUGE02A_D01.scad>
use <SRC/WINDGAUGE02A_D02.scad>
use <SRC/WINDGAUGE02A_R01.scad>
use <SRC/WINDGAUGE02A_R02.scad>
use <SRC/WINDGAUGE02A_R03.scad>
use <SRC/WINDGAUGE02A_S01.scad>
use <SRC/WINDGAUGE02A_S02.scad>
use <SRC/WINDGAUGE02A_S03.scad>
use <SRC/WINDGAUGE01A_D01.scad>
use <SRC/WINDGAUGE01A_D02.scad>
use <SRC/WINDGAUGE01A_R01.scad>
use <SRC/WINDGAUGE01A_R02.scad>
use <SRC/WINDGAUGE01A_R03.scad>
use <SRC/WINDGAUGE01A_R04.scad>
use <SRC/WINDGAUGE01A_S01.scad>
use <SRC/WINDGAUGE01A_S02.scad>
use <SRC/WINDGAUGE01A_S03.scad>
include <configuration.scad>
15,6 → 16,7
barva_R01 = "green";
barva_R02 = "yellow";
barva_R03 = "cyan";
barva_R04 = "cyan";
barva_S01 = "red";
barva_S02 = "green";
barva_S03 = "yellow";
21,7 → 23,7
posunuti_dilu=10; //posunuti dilu od sebe
posunuti_dilu=0; //posunuti dilu od sebe
difference()
{
union()
30,12 → 32,12
//-------------------------------------------------------------
//-------------------------------------------------------------
/*
color(barva_D01)
translate([0,0,0])
translate([0,0,-2*posunuti_dilu])
WINDGAUGE02A_D01();
*/
WINDGAUGE01A_D01();
//WINDGAUGE02A_D02 DRŽÁK druhy dil
//-------------------------------------------------------------
50,13 → 52,44
//-------------------------------------------------------------
color(barva_S01)
translate([0,0,0])
translate([0,0,S01_vyska+S01_sila_materialu+3*posunuti_dilu])
rotate(a=[0,180,0])
WINDGAUGE02A_S01();
WINDGAUGE01A_S01();
color(barva_S02)
WINDGAUGE01A_S02();
color(barva_S03)
translate([0,0,S01_vyska_spodniho_zavitu+S01_sila_drzaku_RJ11-0.3-4*posunuti_dilu])
WINDGAUGE01A_S03();
color(barva_R01)
translate([0,0,S01_vyska+2*S01_sila_materialu+3*posunuti_dilu+8*posunuti_dilu+R04_zavit_vyska+R02_zavit_vyska])
rotate(a=[0,0,0])
WINDGAUGE01A_R01();
color(barva_R02)
translate([0,0,S01_vyska+2*S01_sila_materialu+3*posunuti_dilu+6*posunuti_dilu+R04_zavit_vyska])
rotate(a=[0,0,0])
WINDGAUGE01A_R02();
color(barva_R03)
translate([0,0,S01_vyska+2*S01_sila_materialu+3*posunuti_dilu+3*posunuti_dilu])
WINDGAUGE01A_R03();
color(barva_R04)
translate([0,0,S01_vyska+2*S01_sila_materialu+3*posunuti_dilu+1*posunuti_dilu+R04_zavit_vyska])
rotate(a=[0,180,0])
WINDGAUGE01A_R04();
WINDGAUGE02A_S02();
//WINDGAUGE02A_L01 lopatka 1
//-------------------------------------------------------------
//-------------------------------------------------------------

/Modules/Mechanical/WINDGAUGE01A/CAD/configuration.scad
6,8 → 6,8
//WINDGAUGE02A_S02 - Parametry pro hlavni valec anemometru
S01_hloubka_zavitu=4;
S01_vyska=80; //80
S01_prumer_vnitrni=60;
S01_sila_materialu=1.3;
S01_prumer_vnitrni=46;
S01_sila_materialu=1.2;
S01_vyska_horni_zavit=10;
S01_vyska_spodniho_zavitu=10;
S01_sila_drzaku_RJ11=3; //vyška drážky
16,12 → 16,12
S01_tolerance_zavit=1.5;
//Rozměry ložiska se závity
LO_spodni_prumer=50;
LO_doraz_prumer=55;
LO_horni_prumer=10;
LO_spodni_prumer=22;
LO_doraz_prumer=44.3;
LO_horni_prumer=7.7;
LO_vyska_spodni_doraz=5;
LO_vyska_horni_doraz=10;
LO_vyska_dorazu=3;
LO_vyska_horni_doraz=9;
LO_vyska_dorazu=0;
76,7 → 76,7
D02_prumer_obruby=28;
D02_delka_celeho_uchytu=70;
D02_dotahova_vzdalenost=1.5;
D02_prumer_uchytneho_sroubu=6.2;
D02_prumer_uchytneho_sroubu=4.2;
//WINDGAUGE02A_R01 //rotor s prekritim statoru
R01_vyska_preryti_statoru=10;
94,6 → 94,11
R01_zavit_vyska=5;
R03_mezera_mezi_statorem_rotorem=3;
R02_delka_kridla=45;
R02_vyska_kridla=70;
R02_delka_vyrovnnavaci_tyce=35;
R02_hrana_drzaku=10;
R02_sila_materialu_pod_tyci=5;
110,4 → 115,3

/Modules/Mechanical/WINDGAUGE01A/CAD/print_data/P_WINDGAUGE01A_D01.scad
3,12 → 3,12
use <../SRC/polyScrewThread_r1.scad>
use <../SRC/WINDGAUGE02A_D01.scad>
use <../SRC/WINDGAUGE01A_D01.scad>
PI=3.141592;
WINDGAUGE02A_D01();
WINDGAUGE01A_D01();

/Modules/Mechanical/WINDGAUGE01A/CAD/print_data/P_WINDGAUGE01A_D02.scad
1,9 → 1,9
$fn=100; // model faces resolution.
include <../configuration.scad>
use <../SRC/WINDGAUGE02A_D02.scad>
use <../SRC/WINDGAUGE01A_D02.scad>
rotate([0, -90, 0])
translate([-D02_dotahova_vzdalenost,0,0])
WINDGAUGE02A_D02();
WINDGAUGE01A_D02();

/Modules/Mechanical/WINDGAUGE01A/CAD/print_data/P_WINDGAUGE01A_R01.scad
1,8 → 1,8
$fn=100; // model faces resolution.
include <../configuration.scad>
use <../SRC/WINDGAUGE02A_R01.scad>
use <../SRC/WINDGAUGE01A_R01.scad>
translate([0,0,0])
WINDGAUGE02A_R01();
WINDGAUGE01A_R01();

/Modules/Mechanical/WINDGAUGE01A/CAD/print_data/P_WINDGAUGE01A_R02.scad
1,8 → 1,8
$fn=100; // model faces resolution.
include <../configuration.scad>
use <../SRC/WINDGAUGE02A_R02.scad>
use <../SRC/WINDGAUGE01A_R02.scad>
translate([0,0,R01_mezera_mezi_statorem_rotorem])
WINDGAUGE02A_R02();
translate([0,0,0])
WINDGAUGE01A_R02();

/Modules/Mechanical/WINDGAUGE01A/CAD/print_data/P_WINDGAUGE01A_R03.scad
1,8 → 1,8
$fn=100; // model faces resolution.
include <../configuration.scad>
use <../SRC/WINDGAUGE02A_R03.scad>
use <../SRC/WINDGAUGE01A_R03.scad>
translate([0,0,S01_sila_materialu])
WINDGAUGE02A_R03();
translate([0,0,0])
WINDGAUGE01A_R03();

/Modules/Mechanical/WINDGAUGE01A/CAD/print_data/P_WINDGAUGE01A_R04.scad
1,9 → 1,9
$fn=100; // model faces resolution.
include <../configuration.scad>
use <../SRC/WINDGAUGE02A_R04.scad>
use <../SRC/WINDGAUGE01A_R04.scad>
//neni potřeba
translate([0,0,3/2*S01_sila_materialu])
rotate([0,180, 0])
WINDGAUGE02A_R04 ();
translate([0,0,0])
rotate([0,0, 0])
WINDGAUGE01A_R04 ();

/Modules/Mechanical/WINDGAUGE01A/CAD/print_data/P_WINDGAUGE01A_S01.scad
1,8 → 1,8
$fn=100; // model faces resolution.
include <../configuration.scad>
use <../SRC/WINDGAUGE02A_S01.scad>
use <../SRC/WINDGAUGE01A_S01.scad>
translate([0,0,0])
WINDGAUGE02A_S01();
WINDGAUGE01A_S01();

/Modules/Mechanical/WINDGAUGE01A/CAD/print_data/P_WINDGAUGE01A_S02.scad
1,7 → 1,7
$fn=100; // model faces resolution.
include <../configuration.scad>
use <../SRC/WINDGAUGE02A_S02.scad>
use <../SRC/WINDGAUGE01A_S02.scad>
use <../SRC/polyScrewThread_r1.scad>
9,4 → 9,4
translate([0,0,S01_vyska])
rotate([180,0, 0])
WINDGAUGE02A_S02();
WINDGAUGE01A_S02();

/Modules/Mechanical/WINDGAUGE01A/CAD/print_data/P_WINDGAUGE01A_S03.scad
1,9 → 1,9
$fn=100; // model faces resolution.
include <../configuration.scad>
use <../SRC/WINDGAUGE02A_S03.scad>
use <../SRC/WINDGAUGE01A_S03.scad>
use <../SRC/polyScrewThread_r1.scad>
translate([0,0,0])
rotate([0, 0, 0])
WINDGAUGE02A_S03();
WINDGAUGE01A_S03();