WebSVN – MLAB – /Modules/Mechanical/WINDGAUGE01A/CAD/ Rev 4541 and /Modules/Mechanical/WINDGAUGE01A/CAD/ Rev 4542 – Path Comparison

 /Modules/Mechanical/WINDGAUGE01A/CAD/SRC/WINDGAUGE01A_D01.scad
 ,67 → 1,89
 $fn=40; // model faces resolution.
 include <../configuration.scad>
-include <WINDGAUGE01A_D02.scad>
-include <polyScrewThread_r1.scad>
-PI=3.141592;
+//Drzak na sloup - cast bez drzaku anemometru
+module WINDGAUGE01A_D01(){
+difference()
+    {
+    union()
+        {
+        //základní válec
+        cylinder(h=D02_vyska_uchytky,r=(D02_prumer_obruby+2*D02_sila_materialu)/2,center=true);
+                //úchytové plošky
+        translate([D02_dotahova_vzdalenost+D02_sila_materialu/2,0,0]){cube([D02_sila_materialu,D02_delka_celeho_uchytu,D02_vyska_uchytky],center=true);}
+                }
+    //válec na odečet
+    cylinder(h=D02_vyska_uchytky+0.01,r=D02_prumer_obruby/2,center=true);
+    //kvádr na odecet
+        translate([D02_dotahova_vzdalenost-(D02_prumer_obruby+2*D02_sila_materialu)/2,0,0]){cube([D02_prumer_obruby+2*D02_sila_materialu,D02_prumer_obruby+2*D02_sila_materialu,D02_vyska_uchytky+0.01],center=true);}
+        //otvory na sroub
+        translate([D02_dotahova_vzdalenost,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+     //drzak matky
+    translate([D02_dotahova_vzdalenost+D02_sila_materialu-D02_vyska_matky,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,D02_vyska_uchytky/4]){rotate([0,90,0]){ cylinder (h = D02_vyska_matky+0.01, r= (D02_sirka_matky+0.2)/2, $fn=6);}}
+    translate([D02_dotahova_vzdalenost,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,-D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+     //drzak matky
+    translate([D02_dotahova_vzdalenost+D02_sila_materialu-D02_vyska_matky,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,-D02_vyska_uchytky/4]){rotate([0,90,0]){ cylinder (h = D02_vyska_matky+0.01, r= (D02_sirka_matky+0.2)/2, $fn=6);}}
+        translate([D02_dotahova_vzdalenost,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),-D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+     //drzak matky
+    translate([D02_dotahova_vzdalenost+D02_sila_materialu-D02_vyska_matky,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),-D02_vyska_uchytky/4]){rotate([0,90,0]){ cylinder (h = D02_vyska_matky+0.01, r= (D02_sirka_matky+0.2)/2, $fn=6);}}
-//Držák anemometru
+    translate([D02_dotahova_vzdalenost,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+     //drzak matky
+    translate([D02_dotahova_vzdalenost+D02_sila_materialu-D02_vyska_matky,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),D02_vyska_uchytky/4]){rotate([0,90,0]){ cylinder (h = D02_vyska_matky+0.01, r= (D02_sirka_matky+0.2)/2, $fn=6);}}
+    }
+}
-module WINDGAUGE01A_D01()
-{
+module WINDGAUGE01A_D01_2(){
 difference()
     {
-    union()
-        {
-        //výstuha
-        rotate ([0,-90,0])
-            linear_extrude (height = S01_sila_materialu, convexity = 10)
-                polygon(points=[[D02_vyska_uchytky/2,D01_delka_tyce+S01_prumer_vnitrni/2+D01_material_pred_zavitem+D02_sila_materialu],[0, D01_delka_tyce+S01_prumer_vnitrni/2+D01_material_pred_zavitem+D02_sila_materialu],[0,S01_prumer_vnitrni+D01_material_pred_zavitem],[D01_material_pod_zavitem,S01_prumer_vnitrni+D01_material_pred_zavitem]]);
-        //zavit
-        translate([0,0,D01_material_pod_zavitem])
-            screw_thread(S01_prumer_vnitrni-S01_tolerance_zavit,4,55,S01_vyska_spodniho_zavitu,PI/2,2);
+    union()
+        {
+        //základní válec
+        cylinder(h=D02_vyska_uchytky,r=(D02_prumer_obruby+2*D02_sila_materialu)/2,center=true);
+                //úchytové plošky
+        translate([D02_dotahova_vzdalenost+D02_sila_materialu/2,0,0]){cube([D02_sila_materialu,D02_delka_celeho_uchytu,D02_vyska_uchytky],center=true);}
+                }
+    //válec na odečet
+    cylinder(h=D02_vyska_uchytky+0.01,r=D02_prumer_obruby/2,center=true);
+    //kvádr na odecet
+        translate([D02_dotahova_vzdalenost-(D02_prumer_obruby+2*D02_sila_materialu)/2,0,0]){cube([D02_prumer_obruby+2*D02_sila_materialu,D02_prumer_obruby+2*D02_sila_materialu,D02_vyska_uchytky+0.01],center=true);}
+        //otvory na sroub
+        translate([D02_dotahova_vzdalenost,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+    translate([D02_dotahova_vzdalenost,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,-D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+        translate([D02_dotahova_vzdalenost,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),-D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
-        //spodní valec
-        translate([0,0,D01_material_pod_zavitem/2])
-            cylinder (h = D01_material_pod_zavitem, r=(S01_prumer_vnitrni-S01_tolerance_zavit+D01_material_pred_zavitem*2)/2, center = true, $fn=100);
-        //uchyt na tyc
-        translate([0,D01_delka_tyce/2+(S01_prumer_vnitrni-S01_tolerance_zavit)/2+D01_material_pred_zavitem,D01_material_pod_zavitem/2])
-            cube([D01_sirka_tyce,D01_delka_tyce,D01_material_pod_zavitem],center=true);
-        //uchyt na tyc ovalna cast
-        translate([0,(S01_prumer_vnitrni-S01_tolerance_zavit)/2+D01_material_pred_zavitem,D01_material_pod_zavitem/2])
-            cube([D01_sirka_tyce,D01_material_za_zavitem+D01_material_pred_zavitem,D01_material_pod_zavitem],center=true);
-        //material kolem uchytu na sloupek
-        translate([0,D01_delka_tyce+(S01_prumer_vnitrni-S01_tolerance_zavit)/2+D01_material_pred_zavitem+(D02_sila_materialu+D02_prumer_obruby/2)/2-D02_dotahova_vzdalenost,D01_material_pod_zavitem/2])
-        difference()
-            {
-            cube([D01_sirka_tyce,D02_sila_materialu+D02_prumer_obruby/2,D01_material_pod_zavitem],center=true);
-            translate([0,D02_prumer_obruby/2-D02_dotahova_vzdalenost-D02_sila_materialu,0])
-                cylinder(h=D02_vyska_uchytky+0.01,r=D02_prumer_obruby/2,center=true);
-            }
-        //uchyt na sloupek
-        translate([0,D01_delka_tyce+(S01_prumer_vnitrni-S01_tolerance_zavit)/2+D01_material_pred_zavitem+D02_sila_materialu+(D02_prumer_obruby)/2,D02_vyska_uchytky/2])
-            rotate(a=[0,0,270])
-                WINDGAUGE01A_D02();
-        }
-    //otvor
-    translate([0,0,(D01_material_pod_zavitem+S01_vyska_spodniho_zavitu)/2])
-        cylinder (h = D01_material_pod_zavitem+S01_vyska_spodniho_zavitu+0.02, r=((S01_prumer_vnitrni-S01_tolerance_zavit)-2*D01_material_za_zavitem)/2, center = true, $fn=100);
+    translate([D02_dotahova_vzdalenost,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
     }
 }
-WINDGAUGE01A_D01();

 /Modules/Mechanical/WINDGAUGE01A/CAD/SRC/WINDGAUGE01A_D02.scad
 ,37 → 1,67
 $fn=40; // model faces resolution.
 include <../configuration.scad>
+include <WINDGAUGE01A_D01.scad>
+include <polyScrewThread_r1.scad>
+PI=3.141592;
-//Drzak na sloup - cast bez drzaku anemometru
-module WINDGAUGE01A_D02(){
+//Držák anemometru
+module WINDGAUGE01A_D02()
+{
 difference()
     {
-    union()
-        {
-        //základní válec
-        cylinder(h=D02_vyska_uchytky,r=(D02_prumer_obruby+2*D02_sila_materialu)/2,center=true);
-                //úchytové plošky
-        translate([D02_dotahova_vzdalenost+D02_sila_materialu/2,0,0]){cube([D02_sila_materialu,D02_delka_celeho_uchytu,D02_vyska_uchytky],center=true);}
-                }
-    //válec na odečet
-    cylinder(h=D02_vyska_uchytky+0.01,r=D02_prumer_obruby/2,center=true);
-    //kvádr na odecet
-        translate([D02_dotahova_vzdalenost-(D02_prumer_obruby+2*D02_sila_materialu)/2,0,0]){cube([D02_prumer_obruby+2*D02_sila_materialu,D02_prumer_obruby+2*D02_sila_materialu,D02_vyska_uchytky+0.01],center=true);}
-        //otvory na sroub
-        translate([D02_dotahova_vzdalenost,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
-    translate([D02_dotahova_vzdalenost,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,-D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
-        translate([D02_dotahova_vzdalenost,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),-D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+    union()
+        {
+        //výstuha
+        rotate ([0,-90,0])
+            linear_extrude (height = S01_sila_materialu, convexity = 10)
+                polygon(points=[[D02_vyska_uchytky/2,D01_delka_tyce+S01_prumer_vnitrni/2+D01_material_pred_zavitem+D02_sila_materialu-1],[0, D01_delka_tyce+S01_prumer_vnitrni/2+D01_material_pred_zavitem+D02_sila_materialu-1],[0,S01_prumer_vnitrni/2+D01_material_pred_zavitem],[D01_material_pod_zavitem,S01_prumer_vnitrni/2+D01_material_pred_zavitem]]);
+        //zavit
+        translate([0,0,D01_material_pod_zavitem])
+            screw_thread(S01_prumer_vnitrni-S01_tolerance_zavit,4,55,S01_vyska_spodniho_zavitu,PI/2,2);
-    translate([D02_dotahova_vzdalenost,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+        //spodní valec
+        translate([0,0,D01_material_pod_zavitem/2])
+            cylinder (h = D01_material_pod_zavitem, r=(S01_prumer_vnitrni-S01_tolerance_zavit+D01_material_pred_zavitem*2)/2, center = true, $fn=100);
+        //uchyt na tyc
+        translate([0,D01_delka_tyce/2+(S01_prumer_vnitrni-S01_tolerance_zavit)/2+D01_material_pred_zavitem,D01_material_pod_zavitem/2])
+            cube([D01_sirka_tyce,D01_delka_tyce,D01_material_pod_zavitem],center=true);
+        //uchyt na tyc ovalna cast
+        translate([0,(S01_prumer_vnitrni-S01_tolerance_zavit)/2+D01_material_pred_zavitem,D01_material_pod_zavitem/2])
+            cube([D01_sirka_tyce,D01_material_za_zavitem+D01_material_pred_zavitem,D01_material_pod_zavitem],center=true);
+        //material kolem uchytu na sloupek
+        translate([0,D01_delka_tyce+(S01_prumer_vnitrni-S01_tolerance_zavit)/2+D01_material_pred_zavitem+(D02_sila_materialu+D02_prumer_obruby/2)/2-D02_dotahova_vzdalenost,D01_material_pod_zavitem/2])
+        difference()
+            {
+            cube([D01_sirka_tyce,D02_sila_materialu+D02_prumer_obruby/2,D01_material_pod_zavitem],center=true);
+            translate([0,D02_prumer_obruby/2-D02_dotahova_vzdalenost-D02_sila_materialu,0])
+                cylinder(h=D02_vyska_uchytky+0.01,r=D02_prumer_obruby/2,center=true);
+            }
+        //uchyt na sloupek
+        translate([0,D01_delka_tyce+(S01_prumer_vnitrni-S01_tolerance_zavit)/2+D01_material_pred_zavitem+D02_sila_materialu+(D02_prumer_obruby)/2,D02_vyska_uchytky/2])
+            rotate(a=[0,0,270])
+                WINDGAUGE01A_D01_2();
+        }
+    //otvor
+    translate([0,0,(D01_material_pod_zavitem+S01_vyska_spodniho_zavitu)/2])
+        cylinder (h = D01_material_pod_zavitem+S01_vyska_spodniho_zavitu+0.02, r=((S01_prumer_vnitrni-S01_tolerance_zavit)-2*D01_material_za_zavitem)/2, center = true, $fn=100);
     }
 }
+WINDGAUGE01A_D02();
-//WINDGAUGE02A_D02();

 /Modules/Mechanical/WINDGAUGE01A/CAD/SRC/WINDGAUGE01A_R02.scad
 ,8 → 5,9
 //Drzak rotoru se závitem
 WINDGAUGE01A_R02();
 module WINDGAUGE01A_R02()
 ,32 → 20,11
         //kužel na závit
     cylinder(h=R02_zavit_vyska, r1=S01_prumer_vnitrni/2+5*S01_sila_materialu, r2=R03_prumer_zavitu/2+S01_sila_materialu, center=false,$fn=100);
-   //křídlo
-    translate([0,R02_vyska_kridla+R03_prumer_zavitu/2+S01_sila_materialu,0])
-    rotate([0, 90, 0])
-    difference()
-    {
-    //zakladní materiál
-        translate([0,0,0])
-    cylinder (h = S01_sila_materialu, r=R02_vyska_kridla, $fn=100);
-        translate([-R02_vyska_kridla,0,-0.01])
-     cube([R02_vyska_kridla,R02_vyska_kridla,S01_sila_materialu+0.02],center=false);
-        translate([0,-R02_vyska_kridla,-0.01])
-     cube([R02_vyska_kridla,R02_vyska_kridla,S01_sila_materialu+0.02],center=false);
-     translate([0,0,-0.01])
-     cube([R02_vyska_kridla,R02_vyska_kridla,S01_sila_materialu+0.02],center=false);
-      translate([-R02_vyska_kridla,-R03_prumer_zavitu/2-S01_sila_materialu+3,-0.01])
-     cube([R02_vyska_kridla,R02_vyska_kridla,S01_sila_materialu+0.02],center=false);
-    }
   //kvádr pod tyčí
-translate([-R02_hrana_drzaku/2,-(R02_delka_vyrovnnavaci_tyce+R03_prumer_zavitu/2+S01_sila_materialu),0])
+    translate([-R02_hrana_drzaku/2,-(R02_delka_vyrovnnavaci_tyce+R03_prumer_zavitu/2+S01_sila_materialu),0])
             cube([R02_hrana_drzaku,R02_delka_vyrovnnavaci_tyce+R03_prumer_zavitu/2+S01_sila_materialu,R02_sila_materialu_pod_tyci],center=false);
     //prední tyč
 ,16 → 48,25
     translate([0,R02_delka_kridla+(S01_prumer_vnitrni/2+5*S01_sila_materialu)-R02_hrana_drzaku/2,0])
     cylinder (h = S01_sila_materialu, r=R02_hrana_drzaku/2, $fn=100);
+//ližiny pro křídlo
-    }
+   translate([-(R02_sila_materialu_kridla+R02_sila_materialu_kridla_tolerance)/2,0,0])
+             rotate ([0,-90,0])
+            linear_extrude (height = S01_sila_materialu, convexity = 10)
+                polygon(points=[[0,R03_prumer_zavitu/2],[R02_zavit_vyska, R03_prumer_zavitu/2],[R02_zavit_vyska,R02_delka_kridla+(S01_prumer_vnitrni/2+5*S01_sila_materialu)-R02_hrana_drzaku/2],[0,R02_delka_kridla+(S01_prumer_vnitrni/2+5*S01_sila_materialu)-R02_hrana_drzaku/2]]);
+     translate([S01_sila_materialu+(R02_sila_materialu_kridla+R02_sila_materialu_kridla_tolerance)/2,0,0])
+             rotate ([0,-90,0])
+            linear_extrude (height = S01_sila_materialu, convexity = 10)
+                polygon(points=[[0,R03_prumer_zavitu/2],[R02_zavit_vyska, R03_prumer_zavitu/2],[R02_zavit_vyska,R02_delka_kridla+(S01_prumer_vnitrni/2+5*S01_sila_materialu)-R02_hrana_drzaku/2],[0,R02_delka_kridla+(S01_prumer_vnitrni/2+5*S01_sila_materialu)-R02_hrana_drzaku/2]]);
+    }
     //odečet závitu
    translate([0,0,-10])
-                screw_thread((R03_prumer_zavitu),S01_hloubka_zavitu,55,R04_zavit_vyska+R02_zavit_vyska+R01_zavit_vyska,PI/2,2);
+                screw_thread((R03_prumer_zavitu),S01_hloubka_zavitu,55,R04_zavit_vyska+R02_zavit_vyska+R01_zavit_vyska+10,PI/2,2);
    //otvor na hlavu šroubu

/Modules/Mechanical/WINDGAUGE01A/CAD/configuration.scad
99,6 → 99,8
R02_delka_vyrovnnavaci_tyce=35;
R02_hrana_drzaku=10;
R02_sila_materialu_pod_tyci=5;
R02_sila_materialu_kridla=1.2;
R02_sila_materialu_kridla_tolerance=0.2;



113,5 → 115,3

Subversion Repositories – MLAB

/Modules/Mechanical/WINDGAUGE01A/CAD/ @ 4541 → /Modules/Mechanical/WINDGAUGE01A/CAD/ @ 4542

Compare Path:	Rev
With Path:	Rev