| 10,101 → 10,111 |
|---|
| |
| include <configuration.scad> |
| |
| |
| |
| barva_krytu = "yellow"; |
| barva_rotor1 = "cyan"; |
| barva_rotor2 = "red"; |
| barva_rotor2 = "green"; |
| barva_rotor3 = "green"; |
| barva_rotor4 = "yellow"; |
| barva_stator1 = "cyan"; |
| barva_stator2 = "red"; |
| barva_stator3 = "green"; |
| barva_stator4 = "yellow"; |
| barva_lopatky = "yellow"; |
| |
| |
| posunuti_dilu=10; //posunuti dilu od sebe |
| |
| //KRYT ROTORU |
| //------------------------------------------------------------- |
| //------------------------------------------------------------- |
| color(barva_krytu) |
| translate([0,0,posunuti_dilu*4+(vyska_rotoru1-hloubka_prekryti)/2+vyska_uchytu+tolerance_uchytu+vyska_rotoru2]) |
| kryt_rotoru(prumer_rotoru1,sila_materialu,vyska_rotoru1); |
| |
| translate([0,0,posunuti_dilu*4+(vyska_rotoru1-hloubka_prekryti)/2+vyska_uchytu+tolerance_uchytu+vyska_rotoru2]) |
| kryt_rotoru(prumer_rotoru1,sila_materialu,prumer_sroubu,vyska_rotoru1); |
| |
| |
| |
| //ROTOR1 |
| //------------------------------------------------------------- |
| //------------------------------------------------------------- |
| color(barva_rotor1) |
| translate([0,0,posunuti_dilu*3+(vyska_rotoru1-hloubka_prekryti)/2+vyska_uchytu+tolerance_uchytu+vyska_rotoru2/2]) |
| rotor1(prumer_rotoru1,vyska_rotoru1,prumer_sroubu,vyska_matky,prumer_orechu,sila_materialu,sila_materialu_vule,hloubka_prekryti,hloubka_uchytu,sila_uchytu,vyska_uchytu,tolerance_uchytu); |
| |
| translate([0,0,posunuti_dilu*3+(vyska_rotoru1-hloubka_prekryti)/2+vyska_uchytu+tolerance_uchytu+vyska_rotoru2/2]) |
| rotor1(prumer_rotoru1,vyska_rotoru1,prumer_sroubu,vyska_matky,prumer_orechu,sila_materialu,sila_materialu_vule,hloubka_prekryti,hloubka_uchytu,sila_uchytu,vyska_uchytu,tolerance_uchytu); |
| |
| |
| //ROTOR2 |
| //------------------------------------------------------------- |
| //------------------------------------------------------------- |
| color(barva_rotor2) |
| translate([0,0,0]) |
| rotor2 (vyska_rotoru2,prumer_rotoru1,vyska_kryti,sila_materialu,stator1_sila,vyska_matky,vzdalenost_rot_stat,lozisko_prumer_vnitrni,lozisko_prekryv,sila_pod_loziskem,delka_hridele,lozisko_vyska,sirka_matky_tol,sirka_matky,hloubka_uchytu,vyska_rotoru1,prumer_sroubu,vyska_matky,prumer_orechu,vzdalenost_rot_stat2,sirka_matky_tol); |
| translate([0,0,0]) |
| rotor2 (vyska_rotoru2,prumer_rotoru1,vyska_kryti,sila_materialu,stator1_sila,vyska_matky,vzdalenost_rot_stat,lozisko_prumer_vnitrni,lozisko_prekryv,sila_pod_loziskem,delka_hridele,lozisko_vyska,sirka_matky_tol,sirka_matky,hloubka_uchytu,vyska_rotoru1,prumer_sroubu,vyska_matky,prumer_orechu,vzdalenost_rot_stat2,sirka_matky_tol); |
| |
| |
| //ROTOR3 |
| //------------------------------------------------------------- |
| //------------------------------------------------------------- |
| color(barva_rotor3) |
| translate([0,0,-posunuti_dilu*3-(vyska_rotoru2/2+vyska_matky+vzdalenost_rot_stat+stator1_sila+(lozisko_vyska+sila_pod_loziskem)+((sila_pod_loziskem+delka_hridele+2)/2)-sila_pod_loziskem)]) |
| translate([0,0,-posunuti_dilu*3-(vyska_rotoru2/2+vyska_matky+vzdalenost_rot_stat+stator1_sila+(lozisko_vyska+sila_pod_loziskem)+((sila_pod_loziskem+delka_hridele+2)/2)-sila_pod_loziskem)]) |
| rotor3 (sila_pod_loziskem,delka_hridele,lozisko_prumer_vnitrni,lozisko_prekryv); |
| |
| |
| rotor3 (sila_pod_loziskem,delka_hridele,lozisko_prumer_vnitrni,lozisko_prekryv); |
| |
| //ROTOR4 |
| //------------------------------------------------------------- |
| //------------------------------------------------------------- |
| color(barva_rotor4) |
| translate([0,0,-posunuti_dilu*4-(vyska_rotoru2/2+vyska_matky+vzdalenost_rot_stat+stator1_sila+(lozisko_vyska+sila_pod_loziskem)+((sila_pod_loziskem+delka_hridele+2))-sila_pod_loziskem+(vyska_pod_magnetem+magnet_zapusteni)/2)]) |
| rotate(a = [0, 180, 0]) |
| rotor4 (vyska_pod_magnetem,magnet_zapusteni,magnet_prumer,vyska_hlavy_sroubu,prumer_hlavy_sroubu,prumer_sroubu); |
| translate([0,0,-posunuti_dilu*4-(vyska_rotoru2/2+vyska_matky+vzdalenost_rot_stat+stator1_sila+(lozisko_vyska+sila_pod_loziskem)+((sila_pod_loziskem+delka_hridele+2))-sila_pod_loziskem+(vyska_pod_magnetem+magnet_zapusteni)/2)]) |
| rotate(a = [0, 180, 0]) |
| rotor4 (vyska_pod_magnetem,magnet_zapusteni,magnet_prumer,vyska_hlavy_sroubu,prumer_hlavy_sroubu,prumer_sroubu); |
| |
| |
| |
| |
| |
| |
| |
| color(barva_rotor3) |
| //STATOR1 |
| //------------------------------------------------------------- |
| //------------------------------------------------------------- |
| color(barva_stator1) |
| translate([0,0,-posunuti_dilu-(vyska_rotoru2/2+vyska_matky+vzdalenost_rot_stat+stator1_sila/2)]) |
| |
| stator1(stator1_sila,lozisko_prumer_vnejsi,sirka_matky,lozisko_prumer_vnitrni,lozisko_prekryv,prumer_sroubu); |
| |
| |
| |
| //stator2 |
| color(barva_rotor3) |
| translate([0,0,-posunuti_dilu*2-(vyska_rotoru2/2+vyska_matky+vzdalenost_rot_stat+stator1_sila+(lozisko_vyska+sila_pod_loziskem)/2)]) |
| |
| stator2(lozisko_vyska,sila_pod_loziskem,prumer_rotoru1,sila_materialu,vule1,stator3_sila_steny,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv, |
| //STATOR2 |
| //------------------------------------------------------------- |
| //------------------------------------------------------------- |
| color(barva_stator2) |
| translate([0,0,-posunuti_dilu*2-(vyska_rotoru2/2+vyska_matky+vzdalenost_rot_stat+stator1_sila+(lozisko_vyska+sila_pod_loziskem)/2)]) |
| stator2(lozisko_vyska,sila_pod_loziskem,prumer_rotoru1,sila_materialu,vule1,stator3_sila_steny,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv, |
| prumer_sroubu, |
| lozisko_vyska,vzdalenost_der_x,vzdalenost_der_y,vyska_hlavy_sroubu,prumer_hlavy_sroubu,prumer_rotoru1,stator3_vzdalenost_od_steny); |
| |
| |
| color(barva_rotor3) |
| translate([0,0,-posunuti_dilu*6-(vyska_rotoru2/2+vyska_matky+vzdalenost_rot_stat+stator1_sila+stator3_vyska/2)]) |
| //STATOR3 |
| //------------------------------------------------------------- |
| //------------------------------------------------------------- |
| color(barva_stator3) |
| translate([0,0,-posunuti_dilu*6-(vyska_rotoru2/2+vyska_matky+vzdalenost_rot_stat+stator1_sila+stator3_vyska/2)]) |
| stator3(stator3_vyska,prumer_rotoru1,lozisko_vyska,sila_pod_loziskem,sila_materialu,vule1,stator3_sila_steny, |
| stator3_vyska_prekryti,prumer_hlavy_sroubu,stator3_vzdalenost_od_steny,lozisko_vyska,prumer_sroubu,roztec_sroubu,uchyt_prumer_sroubu,vyska_stator4,kabel_prumer); |
| stator3_vyska_prekryti,prumer_hlavy_sroubu,stator3_vzdalenost_od_steny,lozisko_vyska,prumer_sroubu,roztec_sroubu,uchyt_prumer_sroubu,vyska_stator4,kabel_prumer); |
| |
| //stator4 |
| |
| translate([0,0,-posunuti_dilu*7-(vyska_rotoru2/2+vyska_matky+vzdalenost_rot_stat+stator1_sila+stator3_vyska+vyska_stator4/2)]) |
| rotate(a = [180, 0, 0]) |
| stator4 (roztec_sroubu,uchyt_prumer_sroubu,vyska_stator4,sila_materialu,uchyt_vyska_matky,uchyt_prumer_orechu,kabel_prumer); |
| //STATOR4 |
| //------------------------------------------------------------- |
| //------------------------------------------------------------- |
| color(barva_stator4) |
| translate([0,0,-posunuti_dilu*7-(vyska_rotoru2/2+vyska_matky+vzdalenost_rot_stat+stator1_sila+stator3_vyska+vyska_stator4/2)]) |
| rotate(a = [180, 0, 0]) |
| stator4 (roztec_sroubu,uchyt_prumer_sroubu,vyska_stator4,sila_materialu,uchyt_vyska_matky,uchyt_prumer_orechu,kabel_prumer); |
| |
| |
| //lopatky |
| //LOPATKY |
| //------------------------------------------------------------- |
| //------------------------------------------------------------- |
| |
| //lopatka 1 |
| rotate(a = [0, 0, 90]) |
| translate([sila_uchytu/2,-prumer_lopatky/2-delka_uchytu_lopatky-hloubka_uchytu-prumer_rotoru1/2+hloubka_uchytu,posunuti_dilu+vyska_rotoru2/2+vyska_uchytu/2]) |
| //LOPATKA1 |
| color(barva_lopatky) |
| rotate(a = [0, 0, 90]) |
| translate([sila_uchytu/2,-prumer_lopatky/2-delka_uchytu_lopatky-hloubka_uchytu-prumer_rotoru1/2+hloubka_uchytu,posunuti_dilu+vyska_rotoru2/2+vyska_uchytu/2]) |
| lopatka(hloubka_uchytu,sila_uchytu,vyska_uchytu,tolerance_uchytu,prumer_lopatky,sila_materialu_lopatky,delka_uchytu_lopatky,hrana_uchytu_lopatky,prumer_rotoru1,prumer_sroubu); |
| |
| lopatka(hloubka_uchytu,sila_uchytu,vyska_uchytu,tolerance_uchytu,prumer_lopatky,sila_materialu_lopatky,delka_uchytu_lopatky,hrana_uchytu_lopatky,prumer_rotoru1,prumer_sroubu); |
| //LOPATKA2 |
| color(barva_lopatky) |
| rotate(a = [0, 0, 210]) |
| translate([sila_uchytu/2,-prumer_lopatky/2-delka_uchytu_lopatky-hloubka_uchytu-prumer_rotoru1/2+hloubka_uchytu,posunuti_dilu+vyska_rotoru2/2+vyska_uchytu/2]) |
| lopatka(hloubka_uchytu,sila_uchytu,vyska_uchytu,tolerance_uchytu,prumer_lopatky,sila_materialu_lopatky,delka_uchytu_lopatky,hrana_uchytu_lopatky,prumer_rotoru1,prumer_sroubu); |
| |
| //lopatka 2 |
| rotate(a = [0, 0, 210]) |
| translate([sila_uchytu/2,-prumer_lopatky/2-delka_uchytu_lopatky-hloubka_uchytu-prumer_rotoru1/2+hloubka_uchytu,posunuti_dilu+vyska_rotoru2/2+vyska_uchytu/2]) |
| //LOPATKA2 |
| color(barva_lopatky) |
| rotate(a = [0, 0, 330]) |
| translate([sila_uchytu/2,-prumer_lopatky/2-delka_uchytu_lopatky-hloubka_uchytu-prumer_rotoru1/2+hloubka_uchytu,posunuti_dilu+vyska_rotoru2/2+vyska_uchytu/2]) |
| lopatka(hloubka_uchytu,sila_uchytu,vyska_uchytu,tolerance_uchytu,prumer_lopatky,sila_materialu_lopatky,delka_uchytu_lopatky,hrana_uchytu_lopatky,prumer_rotoru1,prumer_sroubu); |
| |
| lopatka(hloubka_uchytu,sila_uchytu,vyska_uchytu,tolerance_uchytu,prumer_lopatky,sila_materialu_lopatky,delka_uchytu_lopatky,hrana_uchytu_lopatky,prumer_rotoru1,prumer_sroubu); |
| |
| //lopatka 3 |
| rotate(a = [0, 0, 330]) |
| translate([sila_uchytu/2,-prumer_lopatky/2-delka_uchytu_lopatky-hloubka_uchytu-prumer_rotoru1/2+hloubka_uchytu,posunuti_dilu+vyska_rotoru2/2+vyska_uchytu/2]) |
| |
| lopatka(hloubka_uchytu,sila_uchytu,vyska_uchytu,tolerance_uchytu,prumer_lopatky,sila_materialu_lopatky,delka_uchytu_lopatky,hrana_uchytu_lopatky,prumer_rotoru1,prumer_sroubu); |
| |
| |
| |
| |
| |
| //SLOUPKY |
| //------------------------------------------------------------ |
| //sloupek 1 |