| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/WINDGAUGE01A_kryt_rotoru.scad |
|---|
| 0,0 → 1,18 |
| use <../configuration/kryt_rotoru.scad> |
| include <../configuration.scad> |
| color("yellow") |
| translate([0,0,0]) |
| kryt_rotoru(prumer_rotoru1,sila_materialu,prumer_sroubu); |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/WINDGAUGE01A_lopatky.scad |
|---|
| 0,0 → 1,19 |
| use <../configuration/lopatky.scad> |
| include <../configuration.scad> |
| color("yellow") |
| translate([0,(-prumer_lopatky/2-delka_uchytu_lopatky-hloubka_uchytu)/2,0]) |
| rotate(a = [0, 90, 0]) |
| lopatka(hloubka_uchytu,sila_uchytu,vyska_uchytu,tolerance_uchytu,prumer_lopatky,sila_materialu_lopatky,delka_uchytu_lopatky,hrana_uchytu_lopatky,prumer_rotoru1,prumer_sroubu); |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/WINDGAUGE01A_stator3.scad |
|---|
| 15,5 → 15,6 |
| translate([0,0,stator3_vyska/2]) |
| stator3(stator3_vyska,prumer_rotoru1,lozisko_vyska,sila_pod_loziskem,sila_materialu,vule1,stator3_sila_steny,stator3_vyska_prekryti,prumer_hlavy_sroubu,stator3_vzdalenost_od_steny,lozisko_vyska,prumer_sroubu,roztec_sroubu,uchyt_prumer_sroubu); |
| stator3(stator3_vyska,prumer_rotoru1,lozisko_vyska,sila_pod_loziskem,sila_materialu,vule1,stator3_sila_steny, |
| stator3_vyska_prekryti,prumer_hlavy_sroubu,stator3_vzdalenost_od_steny,lozisko_vyska,prumer_sroubu,roztec_sroubu,uchyt_prumer_sroubu,vyska_stator4,kabel_prumer); |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/WINDGAUGE01A_stator4.scad |
|---|
| 0,0 → 1,18 |
| use <../configuration/stator4.scad> |
| include <../configuration.scad> |
| color("yellow") |
| translate([0,0,vyska_stator4/2]) |
| stator4 (roztec_sroubu,uchyt_prumer_sroubu,vyska_stator4,sila_materialu,uchyt_vyska_matky,uchyt_prumer_orechu,kabel_prumer); |