| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/WINDGAUGE01A_kryt_rotoru.scad |
|---|
| File deleted |
| \ No newline at end of file |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/WINDGAUGE01A_stator1.scad |
|---|
| File deleted |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/WINDGAUGE01A_stator2.scad |
|---|
| File deleted |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/WINDGAUGE01A_stator3.scad |
|---|
| File deleted |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/WINDGAUGE01A_stator4.scad |
|---|
| File deleted |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/WINDGAUGE01A_lopatky.scad |
|---|
| File deleted |
| \ No newline at end of file |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/WINDGAUGE01A_rotor1.scad |
|---|
| File deleted |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/WINDGAUGE01A_rotor2.scad |
|---|
| File deleted |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/WINDGAUGE01A_rotor3.scad |
|---|
| File deleted |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/WINDGAUGE01A_rotor4.scad |
|---|
| File deleted |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/P_WINDGAUGE01A_D01.scad |
|---|
| 0,0 → 1,15 |
| $fn=100; // model faces resolution. |
| include <../configuration.scad> |
| use <../SRC/polyScrewThread_r1.scad> |
| use <../SRC/WINDGAUGE02A_D01.scad> |
| PI=3.141592; |
| WINDGAUGE02A_D01(); |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/P_WINDGAUGE01A_D02.scad |
|---|
| 0,0 → 1,9 |
| $fn=100; // model faces resolution. |
| include <../configuration.scad> |
| use <../SRC/WINDGAUGE02A_D02.scad> |
| rotate([0, -90, 0]) |
| translate([-D02_dotahova_vzdalenost,0,0]) |
| WINDGAUGE02A_D02(); |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/P_WINDGAUGE01A_R01.scad |
|---|
| 0,0 → 1,8 |
| $fn=100; // model faces resolution. |
| include <../configuration.scad> |
| use <../SRC/WINDGAUGE02A_R01.scad> |
| translate([0,0,0]) |
| WINDGAUGE02A_R01(); |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/P_WINDGAUGE01A_R02.scad |
|---|
| 0,0 → 1,8 |
| $fn=100; // model faces resolution. |
| include <../configuration.scad> |
| use <../SRC/WINDGAUGE02A_R02.scad> |
| translate([0,0,R01_mezera_mezi_statorem_rotorem]) |
| WINDGAUGE02A_R02(); |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/P_WINDGAUGE01A_R03.scad |
|---|
| 0,0 → 1,8 |
| $fn=100; // model faces resolution. |
| include <../configuration.scad> |
| use <../SRC/WINDGAUGE02A_R03.scad> |
| translate([0,0,S01_sila_materialu]) |
| WINDGAUGE02A_R03(); |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/P_WINDGAUGE01A_R04.scad |
|---|
| 0,0 → 1,9 |
| $fn=100; // model faces resolution. |
| include <../configuration.scad> |
| use <../SRC/WINDGAUGE02A_R04.scad> |
| //neni potřeba |
| translate([0,0,3/2*S01_sila_materialu]) |
| rotate([0,180, 0]) |
| WINDGAUGE02A_R04 (); |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/P_WINDGAUGE01A_S01.scad |
|---|
| 0,0 → 1,8 |
| $fn=100; // model faces resolution. |
| include <../configuration.scad> |
| use <../SRC/WINDGAUGE02A_S01.scad> |
| translate([0,0,0]) |
| WINDGAUGE02A_S01(); |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/P_WINDGAUGE01A_S02.scad |
|---|
| 0,0 → 1,12 |
| $fn=100; // model faces resolution. |
| include <../configuration.scad> |
| use <../SRC/WINDGAUGE02A_S02.scad> |
| use <../SRC/polyScrewThread_r1.scad> |
| PI=3.141592; |
| translate([0,0,S01_vyska]) |
| rotate([180,0, 0]) |
| WINDGAUGE02A_S02(); |
| /Modules/Mechanical/WINDGAUGE01A/CAD/print_data/P_WINDGAUGE01A_S03.scad |
|---|
| 0,0 → 1,9 |
| $fn=100; // model faces resolution. |
| include <../configuration.scad> |
| use <../SRC/WINDGAUGE02A_S03.scad> |
| use <../SRC/polyScrewThread_r1.scad> |
| translate([0,0,0]) |
| rotate([0, 0, 0]) |
| WINDGAUGE02A_S03(); |