5,6 → 5,7 |
vyska_rotoru2=5; |
prumer_sroubu=3.2; |
vyska_matky=3; |
sirka_matky=6; |
prumer_orechu=10; |
sila_materialu=3; |
sila_materialu_vule=0.2; |
16,6 → 17,14 |
lozisko_vyska=5; |
lozisko_prekryv=1.5; |
|
//stator1 |
stator1_sila=2; |
|
//stator1 |
sila_pod_loziskem=1; |
|
|
|
//nastevní rotoru2 |
vyska_kryti=5; |
|
25,56 → 34,41 |
vyska_uchytu=10; |
tolerance_uchytu=0.1; |
|
difference() |
{ |
union () |
{ |
|
cylinder (h = vyska_rotoru2, r=prumer_rotoru1/2, center = true, $fn=100); |
|
|
|
|
//kryci kroužek |
translate([0,0,-(vyska_rotoru2)/2-(vyska_kryti)/2]) |
komponent2(); |
|
} |
|
//otvory pro uchyceni krytky rotoru |
translate([0,0,hloubka_prekryti/2]) |
cylinder (h = vyska_rotoru1+0.1, r=prumer_sroubu/2, center = true, $fn=100); |
|
translate([0,0,-(vyska_rotoru1-hloubka_prekryti)/2+vyska_matky/2]) |
cylinder (h = vyska_matky+0.1, r=prumer_orechu/2, center = true, $fn=100); |
|
difference() |
{ |
cylinder (h = stator1_sila, r=(lozisko_prumer_vnejsi+10+sirka_matky)/2, center = true, $fn=100); |
|
//otvor pro uchyceni prvni lopatky |
translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,0]) |
cylinder (h = vyska_rotoru1+0.1, r=prumer_sroubu/2, center = true, $fn=100); |
|
translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,-(vyska_rotoru2)/2+vyska_matky/2]) |
cylinder (h = vyska_matky+0.1, r=prumer_orechu/2, center = true, $fn=100); |
//otvor pro hridel rotoru |
translate([0,0,0]) |
cylinder (h = stator1_sila+0.1, r=(lozisko_prumer_vnitrni+2*lozisko_prekryv+2)/2, center = true, $fn=100); |
|
//otvor pro uchyceni druhe lopatky |
rotate(a=[0,0,120]) |
translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,0]) |
cylinder (h = vyska_rotoru1+0.1, r=prumer_sroubu/2, center = true, $fn=100); |
|
|
//otvor pro sroub 1 |
translate([(lozisko_prumer_vnejsi+prumer_sroubu+5)/2,0,0]) |
cylinder (h = stator1_sila+0.1, r=prumer_sroubu/2, center = true, $fn=100); |
|
//otvor pro sroub 2 |
rotate(a=[0,0,120]) |
translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,-(vyska_rotoru2)/2+vyska_matky/2]) |
cylinder (h = vyska_matky+0.1, r=prumer_orechu/2, center = true, $fn=100); |
translate([(lozisko_prumer_vnejsi+prumer_sroubu+5)/2,0,0]) |
|
//otvor pro uchyceni treti lopatky |
rotate(a=[0,0,240]) |
translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,0]) |
cylinder (h = vyska_rotoru1+0.1, r=prumer_sroubu/2, center = true, $fn=100); |
cylinder (h = stator1_sila+0.1, r=prumer_sroubu/2, center = true, $fn=100); |
|
//otvor pro sroub 3 |
rotate(a=[0,0,240]) |
translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,-(vyska_rotoru2)/2+vyska_matky/2]) |
cylinder (h = vyska_matky+0.1, r=prumer_orechu/2, center = true, $fn=100); |
translate([(lozisko_prumer_vnejsi+prumer_sroubu+5)/2,0,0]) |
|
} |
cylinder (h = stator1_sila+0.1, r=prumer_sroubu/2, center = true, $fn=100); |
|
|
|
81,16 → 75,10 |
|
|
|
module komponent2() |
{ |
difference () |
{ |
cylinder (h = vyska_kryti, r=(prumer_rotoru1/2), center = true, $fn=100); |
} |
|
cylinder (h = vyska_kryti+0.1, r=(prumer_rotoru1/2-sila_materialu), center = true, $fn=100); |
|
|
|
} |
|
} |
|