WebSVN – MLAB – /Modules/Mechanical/WINDGAUGE02A/ Rev 4523 and /Modules/Mechanical/WINDGAUGE02A/ Rev 4524 – Path Comparison

 /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_L01.scad
 ,12 → 1,138
 $fn=40; // model faces resolution.
 include <../configuration.scad>
+include <polyScrewThread_r1.scad>
+PI=3.141592;
 WINDGAUGE02A_L01();
 //Model lopatky
+module WINDGAUGE02A_L01()
+        {
+     difference()
+        {
+        union()
+        {
+//koule vrchní
+            translate([0,0,R01_vyska_preryti_statoru])
+sphere(d = (S01_prumer_vnitrni/2+3*S01_sila_materialu)*2, $fn=100);
+//spodní válec
+cylinder (h = R01_vyska_preryti_statoru, r=S01_prumer_vnitrni/2+3*S01_sila_materialu, $fn=100);
+//lopatka 1
+translate([-L01_hrana_drzaku_a/2,-(S01_prumer_vnitrni/2+2*S01_sila_materialu+L01_delka_uchytu+L01_prumer_lopatky/2),0])
+lopatka();
+//lopatka 2
+          rotate([0, 0, 120])
+translate([-L01_hrana_drzaku_a/2,-(S01_prumer_vnitrni/2+2*S01_sila_materialu+L01_delka_uchytu+L01_prumer_lopatky/2),0])
+lopatka();
+//lopatka 3
+         rotate([0, 0, 240])
+translate([-L01_hrana_drzaku_a/2,-(S01_prumer_vnitrni/2+2*S01_sila_materialu+L01_delka_uchytu+L01_prumer_lopatky/2),0])
+lopatka();
+    }
+ //Odečet spodního válce
+ translate([0,0,-(S01_prumer_vnitrni/2+2*S01_sila_materialu)])
+cylinder (h = R01_vyska_preryti_statoru+(S01_prumer_vnitrni/2+2*S01_sila_materialu), r=S01_prumer_vnitrni/2+2*S01_sila_materialu, $fn=100);
+ //odecet koule
+ translate([0,0,R01_vyska_preryti_statoru])
+sphere(d = (S01_prumer_vnitrni/2+2*S01_sila_materialu)*2, $fn=100);
+ }
+ difference()
+        {
+ union()
+            {
+        //závit na ukotvení rotoru
+                //zakladni material
+    cylinder (h = (S01_prumer_vnitrni/2+2*S01_sila_materialu)+R01_vyska_preryti_statoru, r=(lozisko_prumer_vnejsi/2-1), $fn=100);
+     vyztuhy();
+                }
+translate([0,0,-5])
+screw_thread((11-S01_tolerance_zavit),3,55,R01_vyska_preryti_statoru+10,PI/2,2);
+   }
+   }
+module vyztuhy()
+{
+    difference()
+        {
+ translate([0,0,R01_vyska_preryti_statoru])
+cylinder(h=(S01_prumer_vnitrni/2+3*S01_sila_materialu), r1=(lozisko_prumer_vnejsi/2-1), r2=(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+3*S01_sila_materialu)-R01_vyska_preryti_statoru, center=false, $fn=100);
+ //vykousnutí 1
+            translate([S01_sila_materialu/2,S01_sila_materialu/2,R01_vyska_preryti_statoru-0.005])
+cube([(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+3*S01_sila_materialu),(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+3*S01_sila_materialu),(S01_prumer_vnitrni/2+3*S01_sila_materialu)+0.01],center=false);
+//vykousnutí 2
+ rotate([0, 0, 90])
+            translate([S01_sila_materialu/2,S01_sila_materialu/2,R01_vyska_preryti_statoru-0.005])
+cube([(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+3*S01_sila_materialu),(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+3*S01_sila_materialu),(S01_prumer_vnitrni/2+3*S01_sila_materialu)+0.01],center=false);
+ //vykousnutí 3
+ rotate([0, 0, 180])
+            translate([S01_sila_materialu/2,S01_sila_materialu/2,R01_vyska_preryti_statoru-0.005])
+cube([(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+3*S01_sila_materialu),(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+3*S01_sila_materialu),(S01_prumer_vnitrni/2+3*S01_sila_materialu)+0.01],center=false);
+ //vykousnutí 4
+ rotate([0, 0, 270])
+        translate([S01_sila_materialu/2,S01_sila_materialu/2,R01_vyska_preryti_statoru-0.005])
+cube([(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+3*S01_sila_materialu),(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+3*S01_sila_materialu),(S01_prumer_vnitrni/2+3*S01_sila_materialu)+0.01],center=false);
+ difference()
+        {
+ translate([0,0,R01_vyska_preryti_statoru])
+sphere(d = (S01_prumer_vnitrni/2+12*S01_sila_materialu)*2, $fn=100);
+            translate([0,0,R01_vyska_preryti_statoru])
+sphere(d = (S01_prumer_vnitrni/2+3*S01_sila_materialu)*2, $fn=100);
+ }
+ }
+ }
+module lopatka()
+      {
+          difference()
+        {
+ union()
+        {
+        translate([0,0,L01_prumer_lopatky/2])
+         sphere(d = L01_prumer_lopatky, $fn=100);
+         translate([0,0,0])
+            cube([L01_hrana_drzaku_a,L01_delka_uchytu+L01_prumer_lopatky/2+10,L01_hrana_drzaku_b],center=false);
+      }
+ translate([0,0,L01_prumer_lopatky/2])
+         sphere(d = L01_prumer_lopatky-L01_sila_materialu_lopatky*2, $fn=100);
+      translate([-L01_prumer_lopatky+0.01,-L01_prumer_lopatky,0])
+  cube([L01_prumer_lopatky+0.01,2*(L01_delka_uchytu+L01_prumer_lopatky/2+10),L01_prumer_lopatky],center=false);
+ }
+ }
+//starý model
+/*
 module WINDGAUGE02A_L01()
         union()

 /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R02.scad
 ,64 → 1,40
-$fn=40; // model faces resolution.
+$fn=100; // model faces resolution.
 include <../configuration.scad>
 include <polyScrewThread_r1.scad>
 PI=3.141592;
+WINDGAUGE02A_R02();
 module WINDGAUGE02A_R02()
     {
-        difference()
+        //setihrana matice
+          difference()
         {
-   union()
+            union()
             {
-                cylinder (h = R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2, center = true, $fn=100);
-      //valec pod zavitem
-    translate([0,0,(L01_hloubka_zapusteni_drzaku+R02_sila_mateiralu_pod_lopatkami)/2])
-        cylinder (h = L01_hloubka_zapusteni_drzaku+L01_hrana_drzaku_b-1, r=(prumer_osicky+3*S01_sila_materialu)/2, $fn=100);
-                //zavit
-        translate([0,0,L01_hloubka_zapusteni_drzaku+L01_hrana_drzaku_b+(L01_hloubka_zapusteni_drzaku+R02_sila_mateiralu_pod_lopatkami)/2-3])
-      screw_thread(prumer_osicky+3*S01_sila_materialu,S01_hloubka_zavitu,55,2*R02_vyska_matky+3,PI/2,2);
+        //závit
+    screw_thread((11-S01_tolerance_zavit),3,55,R01_vyska_preryti_statoru,PI/2,2);
-}
-//otvor pro lopatku 1
-            rotate(a=[0,0,0])
+    //spodní podložka
+            translate([0,0,-R01_mezera_mezi_statorem_rotorem/2])
+    cylinder (h = R01_mezera_mezi_statorem_rotorem, r=(lozisko_prumer_vnitrni+2*lozisko_prekryv+2)/2, center = true, $fn=100);
+                }
-           translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2-L01_hloubka_zapusteni-L01_sila_zapusteni_drzaku/2,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-L01_hloubka_zapusteni_drzaku/2])
-                cube([L01_sila_zapusteni_drzaku+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,L01_hloubka_zapusteni_drzaku],true);
-  //otvor pro lopatku 2
-            rotate(a=[0,0,120])
-           translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2-L01_hloubka_zapusteni-L01_sila_zapusteni_drzaku/2,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-L01_hloubka_zapusteni_drzaku/2])
-                cube([L01_sila_zapusteni_drzaku+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,L01_hloubka_zapusteni_drzaku],true);
+ //otvor
+translate([0,0,-R01_mezera_mezi_statorem_rotorem-0.05])
+cylinder (h = R01_vyska_preryti_statoru+R01_mezera_mezi_statorem_rotorem+0.1, r=prumer_osicky/2, $fn=100);
+ }
-    //otvor pro lopatku 3
-            rotate(a=[0,0,240])
-           translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2-L01_hloubka_zapusteni-L01_sila_zapusteni_drzaku/2,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-L01_hloubka_zapusteni_drzaku/2])
-                cube([L01_sila_zapusteni_drzaku+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,L01_hloubka_zapusteni_drzaku],true);
-      //otvor na hřídelku
-  cylinder (h = R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku+0.1+60, r=prumer_osicky/2, center = true, $fn=100);
- /*
-  //otvor pro pomocnou trubicku
-    translate([0,0,-(((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-zapusteni_pomocne_trubicky/2)])
-  cylinder (h = zapusteni_pomocne_trubicky, r=prumer_pomocne_trubicky/2, center = true, $fn=100);
-*/
-}
 }
-WINDGAUGE02A_R02();

 /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R05.scad
 ,6 → 1,16
 $fn=40; // model faces resolution.
 include <../configuration.scad>
+include <polyScrewThread_r1.scad>
+PI=3.141592;
 module WINDGAUGE02A_R05()
     {
         //setihrana matice

 /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_S02.scad
 ,7 → 26,17
 //spodní doraz
-cylinder (h = S01_sila_materialu, r=S01_prumer_vnitrni/2+S01_sila_materialu, $fn=100);
+cylinder (h = S01_sila_materialu, r=S01_prumer_vnitrni/2+S01_sila_materialu, $fn=100);
+//krycí ovál - usnadnění povolení
+difference()
+        {
+cylinder (h = R01_vyska_preryti_statoru+5, r=S01_prumer_vnitrni/2+3/2*S01_sila_materialu, $fn=100);
+cylinder (h = R01_vyska_preryti_statoru+5+0.01, r=S01_prumer_vnitrni/2+S01_sila_materialu, $fn=100);
+ }
 }
 //odstranění vnitřní výplně
 ,35 → 43,64
   translate([0,0,S01_sila_materialu])
 cylinder (h = S01_vyska_horni_zavit+0.01, r=S01_prumer_vnitrni/2-S01_hloubka_zavitu/2-S01_sila_materialu, $fn=100);
-            //otvor na pruchod hridelky
+            //otvor na ložisko
   translate([0,0,S01_sila_materialu/2])
-  cylinder (h = S01_sila_materialu+0.01, r=(lozisko_prumer_vnitrni+0.2)/2+lozisko_prekryv, center = true, $fn=100);
-  //otvor na šroub 1
+  cylinder (h = S01_sila_materialu+0.01, r=(lozisko_prumer_vnejsi+0.2)/2, center = true, $fn=100);
+ //otvory na hlavu šroubu ve dně
+  //otvor na hlavu šroubu 1
  translate([-senzor_delka/2,-senzor_sirka/2,(lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky)/2])
-  cylinder (h = lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
+  cylinder (h = lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r=(prumer_hlavy_sroubu)/2, center = true, $fn=100);
 //otvor na šroub 2
  translate([senzor_delka/2,-senzor_sirka/2,(lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky)/2])
-  cylinder (h = lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
+ cylinder (h = lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r=(prumer_hlavy_sroubu)/2, center = true, $fn=100);
 //otvor na šroub 3
  translate([senzor_delka/2,senzor_sirka/2,(lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky)/2])
-  cylinder (h = lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
+ cylinder (h = lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r=(prumer_hlavy_sroubu)/2, center = true, $fn=100);
 //otvor na šroub 4
  translate([-senzor_delka/2,senzor_sirka/2,(lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky)/2])
-  cylinder (h = lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
+   cylinder (h = lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r=(prumer_hlavy_sroubu)/2, center = true, $fn=100);
 }
-translate([0,0,lozisko_vyska/2+S01_sila_materialu])
+//otvor na ložisko
    difference()
   {
- cylinder (h = lozisko_vyska, r=(lozisko_prumer_vnejsi+2*S01_sila_materialu)/2, center = true, $fn=100);
- cylinder (h = lozisko_vyska+0.01, r=(lozisko_prumer_vnejsi+0.2)/2, center = true, $fn=100);
+translate([0,0,(R01_vyska_preryti_statoru+2*lozisko_vyska)/2+S01_sila_materialu])
+ cylinder (h = R01_vyska_preryti_statoru+2*lozisko_vyska, r=(lozisko_prumer_vnejsi+2*S01_sila_materialu)/2, center = true, $fn=100);
+ translate([0,0,(R01_vyska_preryti_statoru+2*lozisko_vyska)/2+S01_sila_materialu])
+      cylinder (h = R01_vyska_preryti_statoru+2*lozisko_vyska+0.01, r=(lozisko_prumer_vnejsi+0.2)/2, center = true, $fn=100);
+//otvory na hlavy sroubu v uchytu loziska
+ translate([-senzor_delka/2,-senzor_sirka/2,0])
+     {
+ cylinder (h = vyska_hlavy_sroubu, r= (prumer_hlavy_sroubu)/2, $fn=40);
+ translate([0,0,vyska_hlavy_sroubu])
+ cylinder(h=2+0.02, r1=(prumer_hlavy_sroubu)/2, r2=(prumer_sroubu+0.2)/2);
+     }
+  translate([-senzor_delka/2,senzor_sirka/2,0])
+{
+ cylinder (h = vyska_hlavy_sroubu, r= (prumer_hlavy_sroubu)/2, $fn=40);
+ translate([0,0,vyska_hlavy_sroubu])
+ cylinder(h=2+0.02, r1=(prumer_hlavy_sroubu)/2, r2=(prumer_sroubu+0.2)/2);
+     }
+  translate([senzor_delka/2,-senzor_sirka/2,0])
+{
+ cylinder (h = vyska_hlavy_sroubu, r= (prumer_hlavy_sroubu)/2, $fn=40);
+ translate([0,0,vyska_hlavy_sroubu])
+ cylinder(h=2+0.02, r1=(prumer_hlavy_sroubu)/2, r2=(prumer_sroubu+0.2)/2);
+     }
+   translate([senzor_delka/2,senzor_sirka/2,0])
+{
+ cylinder (h = vyska_hlavy_sroubu, r= (prumer_hlavy_sroubu)/2, $fn=40);
+ translate([0,0,vyska_hlavy_sroubu])
+ cylinder(h=2+0.02, r1=(prumer_hlavy_sroubu)/2, r2=(prumer_sroubu+0.2)/2);
+     }
 }
 difference()
 ,8 → 122,12
 translate([-senzor_delka/2,senzor_sirka/2,0])
 SLOUPEK();
     }
- translate([0,0,S01_sila_materialu])
-  cylinder (h = lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r=(lozisko_prumer_vnejsi+0.2)/2, $fn=100);
+ translate([0,0,0])
+  cylinder (h = R01_vyska_preryti_statoru+2*lozisko_vyska+S01_sila_materialu, r=(lozisko_prumer_vnejsi+0.2)/2, $fn=100);
+ //doraz loziska
+translate([0,0,(R01_vyska_preryti_statoru+2*lozisko_vyska)+S01_sila_materialu+8/2])
+cylinder(h=8, r1=(lozisko_prumer_vnejsi+0.2)/2, r2=0, center=true);
 }
 ,7 → 134,6
 }
 }
 ,18 → 144,26
 translate([0,0,S01_sila_materialu])
 difference () {
-    cylinder (h = lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky, r= sirka_matky/2+S01_sila_materialu, $fn=20);
+    cylinder (h = R01_vyska_preryti_statoru+2*lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky, r= sirka_matky/2+S01_sila_materialu, $fn=20);
-       translate([0,0,lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky-vyska_matky])
+       translate([0,0,R01_vyska_preryti_statoru+2*lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky-vyska_matky])
             cylinder (h = vyska_matky+0.01, r= (sirka_matky+0.2)/2, $fn=6);
     translate([0,0,-0.01])
-            cylinder (h = lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r= (prumer_sroubu+0.2)/2, $fn=10);
-        }
+            cylinder (h = R01_vyska_preryti_statoru+2*lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r= (prumer_sroubu+0.2)/2, $fn=40);
+    translate([0,0,-0.01])
+            cylinder (h = vyska_hlavy_sroubu-S01_sila_materialu, r= (prumer_hlavy_sroubu)/2, $fn=40);
+    translate([0,0,vyska_hlavy_sroubu-S01_sila_materialu-0.02])
+    cylinder(h=2+0.02, r1=(prumer_hlavy_sroubu)/2, r2=(prumer_sroubu+0.2)/2);
+        }
   }

/Modules/Mechanical/WINDGAUGE02A/CAD/configuration.scad
29,7 → 29,7

//lozisko
lozisko_prumer_vnitrni=4.9;
lozisko_prumer_vnejsi=16.2;
lozisko_prumer_vnejsi=16.1;
lozisko_vyska=5;
lozisko_prekryv=1.5;

64,7 → 64,7
L01_hrana_drzaku_a=10;
L01_hrana_drzaku_b=3;
L01_tolerance_drzaku=0.4;
L01_delka_uchytu=20;
L01_delka_uchytu=5;
L01_prumer_lopatky=40;
L01_sila_materialu_lopatky=0.9;

90,9 → 90,11


//WINDGAUGE02A_R01 //rotor s prekritim statoru
R01_vyska_preryti_statoru=20;
R01_vyska_preryti_statoru=10;
R01_sila_materialu_pro_prekriti=1.3;
R01_mezera_mezi_statorem_rotorem=3;


//WINDGAUGE02A_R02 //rotor spodni dil

R02_sila_mateiralu_pod_lopatkami=1.3;

Subversion Repositories – MLAB

/Modules/Mechanical/WINDGAUGE02A/ @ 4523 → /Modules/Mechanical/WINDGAUGE02A/ @ 4524

Compare Path:	Rev
With Path:	Rev