Subversion Repositories – MLAB

/Modules/Mechanical/WINDGAUGE02A/CAD @ 4430   →   /Modules/Mechanical/WINDGAUGE02A/CAD/ @ 4431

Compare Path:	Rev
With Path:	Rev

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_D01.scad
0,0 → 1,120
$fn=40; // model faces resolution.
include <../configuration.scad>
use <zavity.scad>
module WINDGAUGE02A_S03(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu)
{
difference()
{
//translate([0,0,-(S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko)/2-10])
metric_thread (diameter=S01_prumer_zavitu-0.3, pitch=1, length=S01_vyska_komponentu_na_lozisko, internal=false, n_starts=6);
//otvory na ložisko
translate([0,0,lozisko_vyska/2])
cylinder (h = lozisko_vyska+0.01, r=(lozisko_prumer_vnejsi+0.2)/2, center = true, $fn=100);
translate([0,0,S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(lozisko_prumer_vnitrni+2*lozisko_prekryv+0.2)/2, center = true, $fn=100);
//otvor na šroub 1
translate([-20,0,vyska_hlavy_sroubu/2])
cylinder (h = vyska_hlavy_sroubu+0.01, r=(prumer_hlavy_sroubu+0.2)/2, center = true, $fn=100);
translate([-20,0,S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
//otvor na šroub 2
translate([20,0,vyska_hlavy_sroubu/2])
cylinder (h = vyska_hlavy_sroubu+0.01, r=(prumer_hlavy_sroubu+0.2)/2, center = true, $fn=100);
translate([20,0,S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
}
}
module stator3(stator3_vyska,prumer_rotoru1,lozisko_vyska,sila_pod_loziskem,sila_materialu,vule1,stator3_sila_steny,
stator3_vyska_prekryti,prumer_hlavy_sroubu,stator3_vzdalenost_od_steny,lozisko_vyska,prumer_sroubu,roztec_sroubu,uchyt_prumer_sroubu,vyska_stator4,kabel_prumer)
{
difference()
{
cylinder (h = stator3_vyska, r=(prumer_rotoru1)/2, center = true, $fn=100);
translate([0,0,(stator3_vyska-lozisko_vyska-sila_pod_loziskem)/2])
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=(prumer_rotoru1-2*sila_materialu-2*vule1-stator3_sila_steny)/2, center = true, $fn=100);
cylinder (h = stator3_vyska+0.1, r=(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-1)/2, center = true, $fn=100);
translate([0,0,(stator3_vyska-stator3_vyska_prekryti)/2])
difference()
{
cylinder (h = stator3_vyska_prekryti+0.1, r=(prumer_rotoru1+0.1)/2, center = true, $fn=100);
cylinder (h = stator3_vyska_prekryti+0.1, r=(prumer_rotoru1-2*sila_materialu-2*vule1)/2, center = true, $fn=100);
}
//otvory pro uchyceni stator 3
//otvor pro sroub 1
translate([0,(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,0])
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_sroubu/2, center = true, $fn=100);
translate([0,(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,2])
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_hlavy_sroubu/2, center = true, $fn=100);
//otvor pro sroub 2
translate([0,-(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,0])
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_sroubu/2, center = true, $fn=100);
translate([0,-(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,2])
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_hlavy_sroubu/2, center = true, $fn=100);
}
//dno stator3
translate([0,0,-(stator3_vyska-stator3_sila_steny)/2])
difference()
{
cylinder (h = stator3_sila_steny, r=(prumer_rotoru1)/2, center = true, $fn=100);
//otvory pro uchyceni stator 3
//otvor pro sroub 1
translate([0,(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,0])
cylinder (h = stator3_sila_steny+0.1, r=prumer_sroubu/2, center = true, $fn=100);
//otvor pro sroub 2
translate([0,-(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,0])
cylinder (h = stator3_sila_steny+0.1, r=prumer_sroubu/2, center = true, $fn=100);
//srouby pro uchycení anemometru
translate([roztec_sroubu/2,roztec_sroubu/2,0])
cylinder (h = stator3_sila_steny+0.1, r=uchyt_prumer_sroubu/2, center = true, $fn=100);
translate([-roztec_sroubu/2,roztec_sroubu/2,0])
cylinder (h = stator3_sila_steny+0.1, r=uchyt_prumer_sroubu/2, center = true, $fn=100);
translate([roztec_sroubu/2,-roztec_sroubu/2,0])
cylinder (h = stator3_sila_steny+0.1, r=uchyt_prumer_sroubu/2, center = true, $fn=100);
translate([-roztec_sroubu/2,-roztec_sroubu/2,0])
cylinder (h = stator3_sila_steny+0.1, r=uchyt_prumer_sroubu/2, center = true, $fn=100);
//dira na kabel
cylinder (h = vyska_stator4+0.1, r=(kabel_prumer/2+0.1), center = true, $fn=100);
}
}
WINDGAUGE02A_S03(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu);

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R01.scad
2,7 → 2,7
include <../configuration.scad>
module WINDGAUGE02A_R01(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky,vule_mezi_statorem_rotorem,R01_vyska_preryti_statoru,R01_sila_materialu_pro_prekriti)
module WINDGAUGE02A_R01(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky,vule_mezi_statorem_rotorem,R01_vyska_preryti_statoru,R01_sila_materialu_pro_prekriti,S01_sila_materialu)
{
difference()
{
9,7 → 9,7
union()
{
cylinder (h = R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti)/2, center = true, $fn=100);
cylinder (h = R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*S01_sila_materialu)/2, center = true, $fn=100);
//tvorba prekryti statoru
difference()
16,11 → 16,11
{
translate([0,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)+R01_vyska_preryti_statoru/2])
cylinder (h = R01_vyska_preryti_statoru, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti)/2, center = true, $fn=100);
cylinder (h = R01_vyska_preryti_statoru, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*S01_sila_materialu)/2, center = true, $fn=100);
translate([0,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)+R01_vyska_preryti_statoru/2])
cylinder (h = R01_vyska_preryti_statoru+0.1, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem)/2, center = true, $fn=100);
cylinder (h = R01_vyska_preryti_statoru+0.1, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*S01_sila_materialu)/2, center = true, $fn=100);
}
65,6 → 65,6
}
}
WINDGAUGE02A_R01(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky,vule_mezi_statorem_rotorem,R01_vyska_preryti_statoru,R01_sila_materialu_pro_prekriti);
WINDGAUGE02A_R01(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky,vule_mezi_statorem_rotorem,R01_vyska_preryti_statoru,R01_sila_materialu_pro_prekriti,S01_sila_materialu);

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R03.scad
4,19 → 4,19
//kryt_rotoru
module WINDGAUGE02A_R03(R03_sila_materialu,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,vule_mezi_statorem_rotorem,R01_sila_materialu_pro_prekriti,
R02_sila_mateiralu_pod_lopatkami)
R02_sila_mateiralu_pod_lopatkami,S01_sila_materialu)
{
//kopule
difference()
{
sphere(r = (R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*R03_sila_materialu)/2, $fn=100);
sphere(r = (R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*R03_sila_materialu+2*S01_sila_materialu)/2, $fn=100);
sphere(r = (R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti)/2+0.1, $fn=100);
sphere(r = (R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*S01_sila_materialu)/2+0.1, $fn=100);
translate([0,0,-(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*R03_sila_materialu)/2])
translate([0,0,-(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*R03_sila_materialu+2*S01_sila_materialu)/2])
cube(size = [(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*R03_sila_materialu), (R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*R03_sila_materialu), (R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*R03_sila_materialu)], center = true);
cube(size = [(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*R03_sila_materialu+2*S01_sila_materialu), (R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*R03_sila_materialu+2*S01_sila_materialu), (R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*R03_sila_materialu+2*S01_sila_materialu)], center = true);
}
29,11 → 29,11
translate([0,0,-
R02_sila_mateiralu_pod_lopatkami/2])
cylinder (h =
R02_sila_mateiralu_pod_lopatkami, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*R03_sila_materialu)/2, center = true, $fn=100);
R02_sila_mateiralu_pod_lopatkami, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*R03_sila_materialu+2*S01_sila_materialu)/2, center = true, $fn=100);
//válec pro vykrojení
translate([0,0,-R02_sila_mateiralu_pod_lopatkami/2])
cylinder (h = R02_sila_mateiralu_pod_lopatkami+0.01, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti)/2+0.01, center = true, $fn=100);
cylinder (h = R02_sila_mateiralu_pod_lopatkami+0.01, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*S01_sila_materialu)/2+0.01, center = true, $fn=100);
}
}
40,4 → 40,4
WINDGAUGE02A_R03(R03_sila_materialu,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,vule_mezi_statorem_rotorem,R01_sila_materialu_pro_prekriti,
R02_sila_mateiralu_pod_lopatkami);
R02_sila_mateiralu_pod_lopatkami,S01_sila_materialu);

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_S01.scad
3,8 → 3,13
use <zavity.scad>
module WINDGAUGE02A_S01(R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,S01_vyska_zuzene_casti)
module WINDGAUGE02A_S01(R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,S01_vyska_zuzene_casti,S01_vyska_na_elektroniku,S01_vyska_zavitu_na_nasroubovani_drzaku,S01_vyska_prechodu,vule_mezi_statorem_rotorem,S01_vyska_zavitu_na_nasroubovani_drzaku)
{
//zuzena cas komponentu
translate([0,0,(S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko+S01_vyska_zuzene_casti)/2+S01_vyska_prechodu])
difference()
{
cylinder (h = S01_vyska_zuzene_casti, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*S01_sila_materialu)/2, center = true, $fn=100);
20,93 → 25,39
difference()
{
cylinder (h = S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko, r=(S01_prumer_zavitu+2*S01_sila_materialu)/2, center = true, $fn=10);
metric_thread (diameter=S01_prumer_zavitu, pitch=1, length=S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko, internal=true, n_starts=6);
translate([0,0,(S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko+S01_vyska_prechodu)/2])
cylinder(h=S01_vyska_prechodu,r1=(S01_prumer_zavitu+2*S01_sila_materialu)/2, r2=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*S01_sila_materialu)/2, center=true);
}
}
translate([0,0,(S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko+S01_vyska_prechodu)/2])
cylinder(h=S01_vyska_prechodu,r1=(S01_prumer_zavitu)/2, r2=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem)/2, center=true);
module stator3(stator3_vyska,prumer_rotoru1,lozisko_vyska,sila_pod_loziskem,sila_materialu,vule1,stator3_sila_steny,
stator3_vyska_prekryti,prumer_hlavy_sroubu,stator3_vzdalenost_od_steny,lozisko_vyska,prumer_sroubu,roztec_sroubu,uchyt_prumer_sroubu,vyska_stator4,kabel_prumer)
{
difference()
{
cylinder (h = stator3_vyska, r=(prumer_rotoru1)/2, center = true, $fn=100);
translate([0,0,(stator3_vyska-lozisko_vyska-sila_pod_loziskem)/2])
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=(prumer_rotoru1-2*sila_materialu-2*vule1-stator3_sila_steny)/2, center = true, $fn=100);
}
cylinder (h = stator3_vyska+0.1, r=(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-1)/2, center = true, $fn=100);
//spodni cast se zavitem
translate([0,0,(stator3_vyska-stator3_vyska_prekryti)/2])
difference()
{
cylinder (h = S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko, r=(S01_prumer_zavitu+2*S01_sila_materialu)/2, center = true, $fn=100);
cylinder (h = stator3_vyska_prekryti+0.1, r=(prumer_rotoru1+0.1)/2, center = true, $fn=100);
translate([0,0,-(S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko)/2])
metric_thread (diameter=S01_prumer_zavitu, pitch=1, length=S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko+0.01, internal=true, n_starts=6);
cylinder (h = stator3_vyska_prekryti+0.1, r=(prumer_rotoru1-2*sila_materialu-2*vule1)/2, center = true, $fn=100);
}
//otvory pro uchyceni stator 3
//otvor pro sroub 1
translate([0,(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,0])
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_sroubu/2, center = true, $fn=100);
translate([0,(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,2])
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_hlavy_sroubu/2, center = true, $fn=100);
//otvor pro sroub 2
translate([0,-(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,0])
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_sroubu/2, center = true, $fn=100);
translate([0,-(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,2])
cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_hlavy_sroubu/2, center = true, $fn=100);
}
}
//dno stator3
translate([0,0,-(stator3_vyska-stator3_sila_steny)/2])
difference()
{
cylinder (h = stator3_sila_steny, r=(prumer_rotoru1)/2, center = true, $fn=100);
//otvory pro uchyceni stator 3
//otvor pro sroub 1
translate([0,(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,0])
cylinder (h = stator3_sila_steny+0.1, r=prumer_sroubu/2, center = true, $fn=100);
//WINDGAUGE02A_S01(R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,S01_vyska_zuzene_casti,S01_vyska_na_elektroniku,S01_vyska_zavitu_na_nasroubovani_drzaku,S01_vyska_prechodu,vule_mezi_statorem_rotorem,S01_vyska_zavitu_na_nasroubovani_drzaku);
//otvor pro sroub 2
translate([0,-(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,0])
cylinder (h = stator3_sila_steny+0.1, r=prumer_sroubu/2, center = true, $fn=100);
//srouby pro uchycení anemometru
translate([roztec_sroubu/2,roztec_sroubu/2,0])
cylinder (h = stator3_sila_steny+0.1, r=uchyt_prumer_sroubu/2, center = true, $fn=100);
translate([-roztec_sroubu/2,roztec_sroubu/2,0])
cylinder (h = stator3_sila_steny+0.1, r=uchyt_prumer_sroubu/2, center = true, $fn=100);
translate([roztec_sroubu/2,-roztec_sroubu/2,0])
cylinder (h = stator3_sila_steny+0.1, r=uchyt_prumer_sroubu/2, center = true, $fn=100);
translate([-roztec_sroubu/2,-roztec_sroubu/2,0])
cylinder (h = stator3_sila_steny+0.1, r=uchyt_prumer_sroubu/2, center = true, $fn=100);
//dira na kabel
cylinder (h = vyska_stator4+0.1, r=(kabel_prumer/2+0.1), center = true, $fn=100);
}
}
WINDGAUGE02A_S01(R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,S01_vyska_zuzene_casti);

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_S02.scad
0,0 → 1,60
$fn=40; // model faces resolution.
include <../configuration.scad>
use <zavity.scad>
module WINDGAUGE02A_S02(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,senzor_delka,senzor_sirka)
{
difference()
{
//translate([0,0,-(S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko)/2-10])
metric_thread (diameter=S01_prumer_zavitu-0.3, pitch=1, length=S01_vyska_komponentu_na_lozisko, internal=false, n_starts=6);
//otvory na ložisko
translate([0,0,lozisko_vyska/2])
cylinder (h = lozisko_vyska+0.01, r=(lozisko_prumer_vnejsi+0.2)/2, center = true, $fn=100);
translate([0,0,S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(lozisko_prumer_vnitrni+2*lozisko_prekryv+0.2)/2, center = true, $fn=100);
//otvor na šroub 1
translate([-senzor_delka/2,-senzor_sirka/2,vyska_matky/2])
cylinder (h = vyska_matky+0.01, r=(prumer_orechu+0.2)/2, center = true, $fn=100);
translate([-senzor_delka/2,-senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
//otvor na šroub 2
translate([senzor_delka/2,-senzor_sirka/2,vyska_matky/2])
cylinder (h = vyska_matky+0.01, r=(prumer_orechu+0.2)/2, center = true, $fn=100);
translate([senzor_delka/2,-senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
//otvor na šroub 3
translate([senzor_delka/2,senzor_sirka/2,vyska_matky/2])
cylinder (h = vyska_matky+0.01, r=(prumer_orechu+0.2)/2, center = true, $fn=100);
translate([senzor_delka/2,senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
//otvor na šroub 4
translate([-senzor_delka/2,senzor_sirka/2,vyska_matky/2])
cylinder (h = vyska_matky+0.01, r=(prumer_orechu+0.2)/2, center = true, $fn=100);
translate([-senzor_delka/2,senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
}
}
WINDGAUGE02A_S02(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,senzor_delka,senzor_sirka);

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_S03.scad
0,0 → 1,60
$fn=40; // model faces resolution.
include <../configuration.scad>
use <zavity.scad>
module WINDGAUGE02A_S03(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,vyska_hlavy_sroubu,prumer_hlavy_sroubu)
{
difference()
{
//translate([0,0,-(S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko)/2-10])
metric_thread (diameter=S01_prumer_zavitu-0.3, pitch=1, length=S01_vyska_komponentu_na_lozisko, internal=false, n_starts=6);
//otvory na ložisko
translate([0,0,lozisko_vyska/2])
cylinder (h = lozisko_vyska+0.01, r=(lozisko_prumer_vnejsi+0.2)/2, center = true, $fn=100);
translate([0,0,S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(lozisko_prumer_vnitrni+2*lozisko_prekryv+0.2)/2, center = true, $fn=100);
//otvor na šroub 1
translate([-senzor_delka/2,-senzor_sirka/2,vyska_hlavy_sroubu/2])
cylinder (h = vyska_hlavy_sroubu+0.01, r=(prumer_hlavy_sroubu+0.2)/2, center = true, $fn=100);
translate([-senzor_delka/2,-senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
//otvor na šroub 2
translate([senzor_delka/2,-senzor_sirka/2,vyska_hlavy_sroubu/2])
cylinder (h = vyska_hlavy_sroubu+0.01, r=(prumer_hlavy_sroubu+0.2)/2, center = true, $fn=100);
translate([senzor_delka/2,-senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
//otvor na šroub 3
translate([senzor_delka/2,senzor_sirka/2,vyska_hlavy_sroubu/2])
cylinder (h = vyska_hlavy_sroubu+0.01, r=(prumer_hlavy_sroubu+0.2)/2, center = true, $fn=100);
translate([senzor_delka/2,senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
//otvor na šroub 4
translate([-senzor_delka/2,senzor_sirka/2,vyska_hlavy_sroubu/2])
cylinder (h = vyska_hlavy_sroubu+0.01, r=(prumer_hlavy_sroubu+0.2)/2, center = true, $fn=100);
translate([-senzor_delka/2,senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
}
}
WINDGAUGE02A_S03(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,vyska_hlavy_sroubu,prumer_hlavy_sroubu);

/Modules/Mechanical/WINDGAUGE02A/CAD/configuration.scad
10,6 → 10,28
zapusteni_pomocne_trubicky=3;
vule_mezi_statorem_rotorem=2; //vůle mezi statorem a rotorem + sila materialu statoru
//rozmery modulu se senzorem
senzor_delka=20.32;
senzor_sirka=10.16;
//lozisko
lozisko_prumer_vnitrni=5;
lozisko_prumer_vnejsi=16;
lozisko_vyska=5;
lozisko_prekryv=1.5;
//parametry sroubu
prumer_sroubu=3.2;
prumer_hlavy_sroubu=6;
vyska_hlavy_sroubu=4;
vyska_matky=3;
sirka_matky=6.6;
sirka_matky_tol=0.175;
prumer_orechu=10;
//WINDGAUGE02A_S01
S01_vyska=5;
47,6 → 69,7
S01_vyska_zavitu_na_nasroubovani_drzaku=15;
S01_vyska_na_elektroniku=50;
S01_prumer_zavitu=70;
S01_vyska_prechodu=20;
56,25 → 79,7
prumer_rotoru1=70;
vyska_rotoru1=5;
vyska_rotoru2=5;
prumer_sroubu=3.2;
prumer_hlavy_sroubu=6;
vyska_hlavy_sroubu=4;
vyska_matky=3;
sirka_matky=6.6;
sirka_matky_tol=0.175;
prumer_orechu=10;
sila_materialu=2;
sila_materialu_vule=0.2;
hloubka_prekryti=0;
//lozisko
lozisko_prumer_vnitrni=5;
lozisko_prumer_vnejsi=16;
lozisko_vyska=5;
lozisko_prekryv=1.5;
//kryt rotoru
sila_materialu_krytu=1;

/Modules/Mechanical/WINDGAUGE02A/CAD/print_data/P_WINDGAUGE02A_S01.scad
0,0 → 1,10
$fn=100; // model faces resolution.
include <../configuration.scad>
use <../SRC/WINDGAUGE02A_S01.scad>
use <../SRC/zavity.scad>
translate([0,0,(S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko)/2])
WINDGAUGE02A_S01(R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,S01_vyska_zuzene_casti,S01_vyska_na_elektroniku,S01_vyska_zavitu_na_nasroubovani_drzaku,S01_vyska_prechodu,vule_mezi_statorem_rotorem,S01_vyska_zavitu_na_nasroubovani_drzaku);

/Modules/Mechanical/WINDGAUGE02A/CAD/print_data/P_WINDGAUGE02A_S02.scad
0,0 → 1,11
$fn=100; // model faces resolution.
include <../configuration.scad>
use <../SRC/WINDGAUGE02A_S02.scad>
use <../SRC/zavity.scad>
translate([0,0,S01_vyska_komponentu_na_lozisko])
rotate([0, 180, 0])
WINDGAUGE02A_S02(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu);