Subversion Repositories – MLAB

/Modules/Mechanical/WINDGAUGE02A/CAD @ 4436   →   /Modules/Mechanical/WINDGAUGE02A/CAD/ @ 4437

Compare Path:	Rev
With Path:	Rev

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/zavity.scad
File deleted
\ No newline at end of file

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/kryt_rotoru.scad
File deleted

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/stator1.scad
File deleted

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/stator2.scad
File deleted

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/stator3.scad
File deleted

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/stator4.scad
File deleted

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/lopatky.scad
File deleted
\ No newline at end of file

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/rotor3.scad
File deleted

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/rotor2.scad
File deleted
\ No newline at end of file

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/rotor1.scad
File deleted

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_L01.scad
0,0 → 1,50
$fn=40; // model faces resolution.
include <../configuration.scad>
//Model lopatky
module WINDGAUGE02A_L01(L01_hloubka_zapusteni,L01_hloubka_zapusteni_drzaku,L01_sila_zapusteni_drzaku,L01_hrana_drzaku_a,L01_hrana_drzaku_b,L01_tolerance_drzaku,L01_delka_uchytu,L01_prumer_lopatky,L01_sila_materialu_lopatky)
union()
{
//prechod lopatka drzak
difference()
{
translate([-L01_hrana_drzaku_a/2,L01_prumer_lopatky/4,0])
cube([L01_hrana_drzaku_a,(L01_prumer_lopatky/2)+5,L01_hrana_drzaku_b],center=true);
sphere(d = L01_prumer_lopatky, $fn=100);
}
difference()
{
//lopatka
sphere(d = L01_prumer_lopatky, $fn=100);
sphere(d = L01_prumer_lopatky-2*L01_sila_materialu_lopatky, $fn=100);
translate([0,-L01_prumer_lopatky/2,-L01_prumer_lopatky/2])
cube(size = L01_prumer_lopatky);
}
//uchyt_lopatky - tycka
translate([-L01_hrana_drzaku_a/2,L01_prumer_lopatky/2+L01_delka_uchytu/2,0])
cube([L01_hrana_drzaku_a,L01_delka_uchytu,L01_hrana_drzaku_b],center=true);
//uchyt_lopatky - tycka v rotoru
translate([-L01_hrana_drzaku_a/2,L01_prumer_lopatky/2+L01_delka_uchytu+L01_hloubka_zapusteni/2,0])
cube([L01_hrana_drzaku_a,L01_hloubka_zapusteni,L01_hrana_drzaku_b],center=true);
//uchyt_lopatky - v rotoru
translate([-L01_hrana_drzaku_a/2,L01_prumer_lopatky/2+L01_delka_uchytu+L01_hloubka_zapusteni+L01_sila_zapusteni_drzaku/2,0])
cube([L01_hrana_drzaku_a,L01_sila_zapusteni_drzaku,L01_hrana_drzaku_b+2*L01_hloubka_zapusteni_drzaku],center=true);
}
// WINDGAUGE02A_L01(L01_hloubka_zapusteni,L01_hloubka_zapusteni_drzaku,L01_sila_zapusteni_drzaku,L01_hrana_drzaku_a,L01_hrana_drzaku_b,L01_tolerance_drzaku,L01_delka_uchytu,L01_prumer_lopatky,L01_sila_materialu_lopatky);

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R01.scad
65,6 → 65,6
}
}
WINDGAUGE02A_R01(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky,vule_mezi_statorem_rotorem,R01_vyska_preryti_statoru,R01_sila_materialu_pro_prekriti,S01_sila_materialu);
//WINDGAUGE02A_R01(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky,vule_mezi_statorem_rotorem,R01_vyska_preryti_statoru,R01_sila_materialu_pro_prekriti,S01_sila_materialu);

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R02.scad
1,46 → 1,46
$fn=40; // model faces resolution.
include <../configuration.scad>
module WINDGAUGE02A_R02(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky)
{
difference()
{
cylinder (h = R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2, center = true, $fn=100);
//otvor pro lopatku 1
rotate(a=[0,0,0])
translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2-L01_hloubka_zapusteni-L01_sila_zapusteni_drzaku/2,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-L01_hloubka_zapusteni_drzaku/2])
cube([L01_sila_zapusteni_drzaku+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,L01_hloubka_zapusteni_drzaku],true);
//otvor pro lopatku 2
rotate(a=[0,0,120])
translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2-L01_hloubka_zapusteni-L01_sila_zapusteni_drzaku/2,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-L01_hloubka_zapusteni_drzaku/2])
cube([L01_sila_zapusteni_drzaku+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,L01_hloubka_zapusteni_drzaku],true);
//otvor pro lopatku 3
rotate(a=[0,0,240])
translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2-L01_hloubka_zapusteni-L01_sila_zapusteni_drzaku/2,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-L01_hloubka_zapusteni_drzaku/2])
cube([L01_sila_zapusteni_drzaku+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,L01_hloubka_zapusteni_drzaku],true);
//otvor na hřídelku
cylinder (h = R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku+0.1, r=prumer_osicky/2, center = true, $fn=100);
//otvor pro pomocnou trubicku
translate([0,0,-(((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-zapusteni_pomocne_trubicky/2)])
cylinder (h = zapusteni_pomocne_trubicky, r=prumer_pomocne_trubicky/2, center = true, $fn=100);
}
}
WINDGAUGE02A_R02(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky);
$fn=40; // model faces resolution.
include <../configuration.scad>
module WINDGAUGE02A_R02(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky)
{
difference()
{
cylinder (h = R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2, center = true, $fn=100);
//otvor pro lopatku 1
rotate(a=[0,0,0])
translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2-L01_hloubka_zapusteni-L01_sila_zapusteni_drzaku/2,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-L01_hloubka_zapusteni_drzaku/2])
cube([L01_sila_zapusteni_drzaku+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,L01_hloubka_zapusteni_drzaku],true);
//otvor pro lopatku 2
rotate(a=[0,0,120])
translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2-L01_hloubka_zapusteni-L01_sila_zapusteni_drzaku/2,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-L01_hloubka_zapusteni_drzaku/2])
cube([L01_sila_zapusteni_drzaku+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,L01_hloubka_zapusteni_drzaku],true);
//otvor pro lopatku 3
rotate(a=[0,0,240])
translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2-L01_hloubka_zapusteni-L01_sila_zapusteni_drzaku/2,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-L01_hloubka_zapusteni_drzaku/2])
cube([L01_sila_zapusteni_drzaku+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,L01_hloubka_zapusteni_drzaku],true);
//otvor na hřídelku
cylinder (h = R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku+0.1, r=prumer_osicky/2, center = true, $fn=100);
//otvor pro pomocnou trubicku
translate([0,0,-(((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-zapusteni_pomocne_trubicky/2)])
cylinder (h = zapusteni_pomocne_trubicky, r=prumer_pomocne_trubicky/2, center = true, $fn=100);
}
}
//WINDGAUGE02A_R02(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky);

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R03.scad
39,5 → 39,4
}
WINDGAUGE02A_R03(R03_sila_materialu,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,vule_mezi_statorem_rotorem,R01_sila_materialu_pro_prekriti,
R02_sila_mateiralu_pod_lopatkami,S01_sila_materialu);
//WINDGAUGE02A_R03(R03_sila_materialu,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,vule_mezi_statorem_rotorem,R01_sila_materialu_pro_prekriti,R02_sila_mateiralu_pod_lopatkami,S01_sila_materialu);

/Modules/Mechanical/WINDGAUGE02A/CAD/print_data/P_WINDGAUGE02A_L01.scad
0,0 → 1,11
$fn=100; // model faces resolution.
include <../configuration.scad>
use <../SRC/WINDGAUGE02A_L01.scad>
translate([0,0,0])
rotate([0, 90, 0])
WINDGAUGE02A_L01(L01_hloubka_zapusteni,L01_hloubka_zapusteni_drzaku,L01_sila_zapusteni_drzaku,L01_hrana_drzaku_a,L01_hrana_drzaku_b,L01_tolerance_drzaku,L01_delka_uchytu,L01_prumer_lopatky,L01_sila_materialu_lopatky);

/Modules/Mechanical/WINDGAUGE02A/CAD/print_data/P_WINDGAUGE02A_R01.scad
0,0 → 1,9
$fn=100; // model faces resolution.
include <../configuration.scad>
use <../SRC/WINDGAUGE02A_R01.scad>
translate([0,0,R02_sila_mateiralu_pod_lopatkami])
WINDGAUGE02A_R01(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky,vule_mezi_statorem_rotorem,R01_vyska_preryti_statoru,R01_sila_materialu_pro_prekriti,S01_sila_materialu);

/Modules/Mechanical/WINDGAUGE02A/CAD/print_data/P_WINDGAUGE02A_R02.scad
0,0 → 1,9
$fn=100; // model faces resolution.
include <../configuration.scad>
use <../SRC/WINDGAUGE02A_R02.scad>
translate([0,0,R02_sila_mateiralu_pod_lopatkami])
WINDGAUGE02A_R02(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky);

/Modules/Mechanical/WINDGAUGE02A/CAD/print_data/P_WINDGAUGE02A_R03.scad
0,0 → 1,9
$fn=100; // model faces resolution.
include <../configuration.scad>
use <../SRC/WINDGAUGE02A_R03.scad>
translate([0,0,R02_sila_mateiralu_pod_lopatkami])
WINDGAUGE02A_R03(R03_sila_materialu,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,vule_mezi_statorem_rotorem,R01_sila_materialu_pro_prekriti,R02_sila_mateiralu_pod_lopatkami,S01_sila_materialu);

/Modules/Mechanical/WINDGAUGE02A/CAD/print_data/P_WINDGAUGE02A_S03.scad
2,10 → 2,10
include <../configuration.scad>
use <../SRC/WINDGAUGE02A_S03.scad>
use <../SRC/zavity.scad>
use <../SRC/polyScrewThread_r1.scad>
translate([0,0,S01_vyska_komponentu_na_lozisko])
rotate([0, 180, 0])
module WINDGAUGE02A_S03(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,vyska_hlavy_sroubu,prumer_hlavy_sroubu)
WINDGAUGE02A_S03(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,vyska_hlavy_sroubu,prumer_hlavy_sroubu);