WebSVN – MLAB – /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/ Rev 4540 and /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/ Rev 4541 – Path Comparison

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_D01.scad
17,7 → 17,7
//výstuha
rotate ([0,-90,0])
linear_extrude (height = S01_sila_materialu, convexity = 10)
polygon(points=[[D02_vyska_uchytky/2,D01_delka_tyce+S01_prumer_vnitrni/2+D01_material_pred_zavitem+D02_sila_materialu],[0, D01_delka_tyce+S01_prumer_vnitrni/2+D01_material_pred_zavitem+D02_sila_materialu],[0,S01_prumer_vnitrni+D01_material_pred_zavitem],[D01_material_pod_zavitem,S01_prumer_vnitrni+D01_material_pred_zavitem]]);
polygon(points=[[D02_vyska_uchytky/2,D01_delka_tyce+S01_prumer_vnitrni/2+D01_material_pred_zavitem+D02_sila_materialu-1],[0, D01_delka_tyce+S01_prumer_vnitrni/2+D01_material_pred_zavitem+D02_sila_materialu-1],[0,S01_prumer_vnitrni/2+D01_material_pred_zavitem],[D01_material_pod_zavitem,S01_prumer_vnitrni/2+D01_material_pred_zavitem]]);

//zavit
translate([0,0,D01_material_pod_zavitem])
49,7 → 49,7
//uchyt na sloupek
translate([0,D01_delka_tyce+(S01_prumer_vnitrni-S01_tolerance_zavit)/2+D01_material_pred_zavitem+D02_sila_materialu+(D02_prumer_obruby)/2,D02_vyska_uchytky/2])
rotate(a=[0,0,270])
WINDGAUGE02A_D02();
WINDGAUGE02A_D02_2();

}

 /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_D02.scad
 ,7 → 2,6
 include <../configuration.scad>
 //Drzak na sloup - cast bez drzaku anemometru
 module WINDGAUGE02A_D02(){
 ,13 → 24,68
         //otvory na sroub
         translate([D02_dotahova_vzdalenost,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+     //drzak matky
+    translate([D02_dotahova_vzdalenost+D02_sila_materialu-D02_vyska_matky,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,D02_vyska_uchytky/4]){rotate([0,90,0]){ cylinder (h = D02_vyska_matky+0.01, r= (D02_sirka_matky+0.2)/2, $fn=6);}}
     translate([D02_dotahova_vzdalenost,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,-D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+     //drzak matky
+    translate([D02_dotahova_vzdalenost+D02_sila_materialu-D02_vyska_matky,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,-D02_vyska_uchytky/4]){rotate([0,90,0]){ cylinder (h = D02_vyska_matky+0.01, r= (D02_sirka_matky+0.2)/2, $fn=6);}}
         translate([D02_dotahova_vzdalenost,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),-D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+     //drzak matky
+    translate([D02_dotahova_vzdalenost+D02_sila_materialu-D02_vyska_matky,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),-D02_vyska_uchytky/4]){rotate([0,90,0]){ cylinder (h = D02_vyska_matky+0.01, r= (D02_sirka_matky+0.2)/2, $fn=6);}}
     translate([D02_dotahova_vzdalenost,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+     //drzak matky
+    translate([D02_dotahova_vzdalenost+D02_sila_materialu-D02_vyska_matky,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),D02_vyska_uchytky/4]){rotate([0,90,0]){ cylinder (h = D02_vyska_matky+0.01, r= (D02_sirka_matky+0.2)/2, $fn=6);}}
     }
 }
+module WINDGAUGE02A_D02_2(){
+difference()
+    {
+    union()
+        {
+        //základní válec
+        cylinder(h=D02_vyska_uchytky,r=(D02_prumer_obruby+2*D02_sila_materialu)/2,center=true);
+                //úchytové plošky
+        translate([D02_dotahova_vzdalenost+D02_sila_materialu/2,0,0]){cube([D02_sila_materialu,D02_delka_celeho_uchytu,D02_vyska_uchytky],center=true);}
+                }
+    //válec na odečet
+    cylinder(h=D02_vyska_uchytky+0.01,r=D02_prumer_obruby/2,center=true);
+    //kvádr na odecet
+        translate([D02_dotahova_vzdalenost-(D02_prumer_obruby+2*D02_sila_materialu)/2,0,0]){cube([D02_prumer_obruby+2*D02_sila_materialu,D02_prumer_obruby+2*D02_sila_materialu,D02_vyska_uchytky+0.01],center=true);}
+        //otvory na sroub
+        translate([D02_dotahova_vzdalenost,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+    translate([D02_dotahova_vzdalenost,(D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu,-D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+        translate([D02_dotahova_vzdalenost,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),-D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+    translate([D02_dotahova_vzdalenost,-((D02_delka_celeho_uchytu/2-D02_prumer_obruby/2-D02_sila_materialu)/2+D02_prumer_obruby/2+D02_sila_materialu),D02_vyska_uchytky/4]){rotate([0,90,0]){cylinder(h=D02_sila_materialu+0.01,r=D02_prumer_uchytneho_sroubu/2);}}
+    }
+}
 //WINDGAUGE02A_D02();

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_S01.scad
73,29 → 73,29
//otvory na hlavy sroubu v uchytu loziska
translate([-senzor_delka/2,-senzor_sirka/2,0])
{
cylinder (h = vyska_hlavy_sroubu, r= (prumer_hlavy_sroubu)/2, $fn=40);
translate([0,0,vyska_hlavy_sroubu])
cylinder (h = vyska_hlavy_sroubu+10, r= (prumer_hlavy_sroubu)/2, $fn=40);
translate([0,0,vyska_hlavy_sroubu+10])
cylinder(h=2+0.02, r1=(prumer_hlavy_sroubu)/2, r2=(prumer_sroubu+0.2)/2);
}

translate([-senzor_delka/2,senzor_sirka/2,0])
{
cylinder (h = vyska_hlavy_sroubu, r= (prumer_hlavy_sroubu)/2, $fn=40);
translate([0,0,vyska_hlavy_sroubu])
cylinder (h = vyska_hlavy_sroubu+10, r= (prumer_hlavy_sroubu)/2, $fn=40);
translate([0,0,vyska_hlavy_sroubu+10])
cylinder(h=2+0.02, r1=(prumer_hlavy_sroubu)/2, r2=(prumer_sroubu+0.2)/2);
}

translate([senzor_delka/2,-senzor_sirka/2,0])
{
cylinder (h = vyska_hlavy_sroubu, r= (prumer_hlavy_sroubu)/2, $fn=40);
translate([0,0,vyska_hlavy_sroubu])
cylinder (h = vyska_hlavy_sroubu+10, r= (prumer_hlavy_sroubu)/2, $fn=40);
translate([0,0,vyska_hlavy_sroubu+10])
cylinder(h=2+0.02, r1=(prumer_hlavy_sroubu)/2, r2=(prumer_sroubu+0.2)/2);
}

translate([senzor_delka/2,senzor_sirka/2,0])
{
cylinder (h = vyska_hlavy_sroubu, r= (prumer_hlavy_sroubu)/2, $fn=40);
translate([0,0,vyska_hlavy_sroubu])
cylinder (h = vyska_hlavy_sroubu+10, r= (prumer_hlavy_sroubu)/2, $fn=40);
translate([0,0,vyska_hlavy_sroubu+10])
cylinder(h=2+0.02, r1=(prumer_hlavy_sroubu)/2, r2=(prumer_sroubu+0.2)/2);
}
}
147,9 → 147,9
cylinder (h = R01_vyska_preryti_statoru+2lozisko_vyska+2S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r= (prumer_sroubu+0.2)/2, $fn=40);

translate([0,0,-0.01])
cylinder (h = vyska_hlavy_sroubu-S01_sila_materialu, r= (prumer_hlavy_sroubu)/2, $fn=40);
cylinder (h = vyska_hlavy_sroubu+10-S01_sila_materialu, r= (prumer_hlavy_sroubu)/2, $fn=40);

translate([0,0,vyska_hlavy_sroubu-S01_sila_materialu-0.02])
translate([0,0,vyska_hlavy_sroubu+10-S01_sila_materialu-0.02])
cylinder(h=2+0.02, r1=(prumer_hlavy_sroubu)/2, r2=(prumer_sroubu+0.2)/2);

}

Subversion Repositories – MLAB

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/ @ 4540 → /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/ @ 4541

Compare Path:	Rev
With Path:	Rev