Problem with comparison.
| /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R05.scad |
|---|
| 0,0 → 1,35 |
| $fn=40; // model faces resolution. |
| include <../configuration.scad> |
| module WINDGAUGE02A_R05(vyska_pod_magnetem,magnet_zapusteni,magnet_prumer,vyska_hlavy_sroubu,prumer_hlavy_sroubu,prumer_sroubu,vyska_matky,sirka_matky,R05_sirka_matky,S01_sila_materialu) |
| { |
| //setihrana matice |
| difference() |
| { |
| //zakladni material |
| cylinder (h = 2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_zapusteni+vyska_matky, r= R05_sirka_matky/2, $fn=6); |
| //dira na matku |
| cylinder (h = vyska_matky+0.2, r= (sirka_matky+0.2)/2, $fn=6); |
| //otvor pro magnet |
| translate([0,0,(2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_zapusteni+vyska_matky)-magnet_zapusteni/2+0.01]) |
| cylinder (h = magnet_zapusteni+0.01, r=((magnet_prumer+0.2)/2), center = true, $fn=100); |
| //zapusteni uchytného sroubu |
| translate([0,0,(2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_zapusteni+vyska_matky)-vyska_hlavy_sroubu/2+0.1]) |
| cylinder (h = vyska_hlavy_sroubu+1, r=((prumer_hlavy_sroubu+0.2)/2), center = true, $fn=100); |
| //otvor pro sroub |
| translate([0,0,(2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_zapusteni+vyska_matky)/2+0.1]) |
| cylinder (h = (2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_zapusteni+vyska_matky)+0.1, r=(prumer_sroubu)/2, center = true, $fn=100); |
| } |
| } |
| WINDGAUGE02A_R05(vyska_pod_magnetem,magnet_zapusteni,magnet_prumer,vyska_hlavy_sroubu,prumer_hlavy_sroubu,prumer_sroubu,vyska_matky,sirka_matky,R05_sirka_matky,S01_sila_materialu); |