Problem with comparison.
/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_S02.scad |
---|
0,0 → 1,65 |
$fn=40; // model faces resolution. |
include <../configuration.scad> |
include <polyScrewThread_r1.scad> |
PI=3.141592; |
module WINDGAUGE02A_S02(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,senzor_delka,senzor_sirka) |
{ |
difference() |
{ |
//translate([0,0,-(S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko)/2-10]) |
//metric_thread (diameter=S01_prumer_zavitu-0.3, pitch=1, length=S01_vyska_komponentu_na_lozisko, internal=false, n_starts=6); |
screw_thread(S01_prumer_zavitu-2.5,4,55,S01_vyska_komponentu_na_lozisko,PI/2,2); |
//otvory na ložisko |
translate([0,0,lozisko_vyska/2]) |
cylinder (h = lozisko_vyska+0.01, r=(lozisko_prumer_vnejsi+0.2)/2, center = true, $fn=100); |
translate([0,0,S01_vyska_komponentu_na_lozisko/2]) |
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(lozisko_prumer_vnitrni+2*lozisko_prekryv+0.2)/2, center = true, $fn=100); |
//otvor na šroub 1 |
translate([-senzor_delka/2,-senzor_sirka/2,vyska_matky/2]) |
cylinder (h = vyska_matky+0.01, r=(prumer_orechu+0.2)/2, center = true, $fn=100); |
translate([-senzor_delka/2,-senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2]) |
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100); |
//otvor na šroub 2 |
translate([senzor_delka/2,-senzor_sirka/2,vyska_matky/2]) |
cylinder (h = vyska_matky+0.01, r=(prumer_orechu+0.2)/2, center = true, $fn=100); |
translate([senzor_delka/2,-senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2]) |
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100); |
//otvor na šroub 3 |
translate([senzor_delka/2,senzor_sirka/2,vyska_matky/2]) |
cylinder (h = vyska_matky+0.01, r=(prumer_orechu+0.2)/2, center = true, $fn=100); |
translate([senzor_delka/2,senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2]) |
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100); |
//otvor na šroub 4 |
translate([-senzor_delka/2,senzor_sirka/2,vyska_matky/2]) |
cylinder (h = vyska_matky+0.01, r=(prumer_orechu+0.2)/2, center = true, $fn=100); |
translate([-senzor_delka/2,senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2]) |
cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100); |
} |
} |
WINDGAUGE02A_S02(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,senzor_delka,senzor_sirka); |