Subversion Repositories – MLAB

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC @ 4462   →   /Modules/Mechanical/WINDGAUGE02A/CAD/SRC @ 4465

Compare Path:	Rev
With Path:	Rev

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/P_WINDGAUGE02A_R04.scad
0,0 → 1,13
$fn=100; // model faces resolution.
include <../configuration.scad>
use <../SRC/WINDGAUGE02A_R04.scad>
translate([0,0,3/2*S01_sila_materialu])
rotate([0,180, 0])
WINDGAUGE02A_R04 (lozisko_prumer_vnitrni,lozisko_prekryv,S01_sila_materialu,prumer_sroubu);

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/P_WINDGAUGE02A_R05.scad
0,0 → 1,13
$fn=100; // model faces resolution.
include <../configuration.scad>
use <../SRC/WINDGAUGE02A_R05.scad>
translate([0,0,0])
rotate([0,0, 0])
WINDGAUGE02A_R05(vyska_pod_magnetem,magnet_zapusteni,magnet_prumer,vyska_hlavy_sroubu,prumer_hlavy_sroubu,prumer_sroubu,vyska_matky,sirka_matky,R05_sirka_matky,S01_sila_materialu);

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_D01.scad
8,7 → 8,7
module WINDGAUGE02A_D01(S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,D01_material_pod_zavitem,D01_material_za_zavitem,D01_material_pred_zavitem,D01_delka_tyce,D01_sirka_tyce,D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu)
module WINDGAUGE02A_D01(S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,D01_material_pod_zavitem,D01_material_za_zavitem,D01_material_pred_zavitem,D01_delka_tyce,D01_sirka_tyce,D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu,S01_tolerance_zavit)
{
difference()
18,7 → 18,7
{
//zavit
translate([0,0,D01_material_pod_zavitem])
screw_thread(S01_prumer_zavitu-0.5,4,55,S01_vyska_komponentu_na_lozisko,PI/2,2);
screw_thread(S01_prumer_zavitu-S01_tolerance_zavit,4,55,S01_vyska_komponentu_na_lozisko,PI/2,2);
//spodní valec
translate([0,0,D01_material_pod_zavitem/2])
59,7 → 59,7
}
}
WINDGAUGE02A_D01(S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,D01_material_pod_zavitem,D01_material_za_zavitem,D01_material_pred_zavitem,D01_delka_tyce,D01_sirka_tyce,D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu);
WINDGAUGE02A_D01(S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,D01_material_pod_zavitem,D01_material_za_zavitem,D01_material_pred_zavitem,D01_delka_tyce,D01_sirka_tyce,D02_sila_materialu,D02_vyska_uchytky,D02_prumer_obruby,D02_delka_celeho_uchytu,D02_dotahova_vzdalenost,D02_prumer_uchytneho_sroubu,S01_tolerance_zavit);

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R01.scad
65,6 → 65,6
}
}
//WINDGAUGE02A_R01(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky,vule_mezi_statorem_rotorem,R01_vyska_preryti_statoru,R01_sila_materialu_pro_prekriti,S01_sila_materialu);
WINDGAUGE02A_R01(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky,vule_mezi_statorem_rotorem,R01_vyska_preryti_statoru,R01_sila_materialu_pro_prekriti,S01_sila_materialu);

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R02.scad
33,11 → 33,11
//otvor na hřídelku
cylinder (h = R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku+0.1, r=prumer_osicky/2, center = true, $fn=100);
/*
//otvor pro pomocnou trubicku
translate([0,0,-(((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-zapusteni_pomocne_trubicky/2)])
cylinder (h = zapusteni_pomocne_trubicky, r=prumer_pomocne_trubicky/2, center = true, $fn=100);
*/
}
}

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R03.scad
39,4 → 39,4
}
//WINDGAUGE02A_R03(R03_sila_materialu,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,vule_mezi_statorem_rotorem,R01_sila_materialu_pro_prekriti,R02_sila_mateiralu_pod_lopatkami,S01_sila_materialu);
WINDGAUGE02A_R03(R03_sila_materialu,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,vule_mezi_statorem_rotorem,R01_sila_materialu_pro_prekriti,R02_sila_mateiralu_pod_lopatkami,S01_sila_materialu);

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R04.scad
1,47 → 1,28
$fn=40; // model faces resolution.
include <../configuration.scad>
//kryt_rotoru
//dutinka pro upevneni rotoru
module WINDGAUGE02A_R04 (sila_pod_loziskem,delka_hridele,lozisko_prumer_vnitrni,lozisko_prekryv)
//dilec do loziska
module WINDGAUGE02A_R04 (lozisko_prumer_vnitrni,lozisko_prekryv,S01_sila_materialu,prumer_sroubu)
{
difference()
{
//dotahovací kroužek
union()
{
translate([0,0,0])
cylinder (h = sila_pod_loziskem+delka_hridele+2, r=(lozisko_prumer_vnitrni+2*lozisko_prekryv)/2, center = true, $fn=100);
cylinder (h = sila_pod_loziskem+delka_hridele+2+0.1, r=((lozisko_prumer_vnitrni+0.2)/2), center = true, $fn=100);
}
cylinder (h = S01_sila_materialu, r=(lozisko_prumer_vnitrni+2*lozisko_prekryv)/2, center = true, $fn=100);
translate([0,0,S01_sila_materialu])
cylinder (h = S01_sila_materialu, r=(lozisko_prumer_vnitrni+2*lozisko_prekryv+2*S01_sila_materialu)/2, center = true, $fn=100);
translate([0,0,-2*S01_sila_materialu])
cylinder (h = lozisko_vyska, r=(lozisko_prumer_vnitrni/2), center = true, $fn=100);
}
translate([0,0,1/2*S01_sila_materialu-(lozisko_vyska)/2])
cylinder (h = 2*S01_sila_materialu+lozisko_vyska+0.1, r=((prumer_sroubu)/2), center = true, $fn=100);
}
module WINDGAUGE02A_R05(vyska_pod_magnetem,magnet_zapusteni,magnet_prumer,vyska_hlavy_sroubu,prumer_hlavy_sroubu,prumer_sroubu)
{
difference()
{
//segment pro sroub a magnet
translate([0,0,0])
cylinder (h = vyska_pod_magnetem+magnet_zapusteni, r=(magnet_prumer+5)/2, center = true, $fn=100);
//otvor pro magnet
translate([0,0,vyska_pod_magnetem/2+0.1])
cylinder (h = magnet_zapusteni, r=((magnet_prumer+0.2)/2), center = true, $fn=100);
//zapusteni uchytného sroubu
translate([0,0,(vyska_pod_magnetem-vyska_hlavy_sroubu-1)/2+0.1])
cylinder (h = vyska_hlavy_sroubu+1, r=((prumer_hlavy_sroubu+0.2)/2), center = true, $fn=100);
//otvor pro sroub
cylinder (h = vyska_pod_magnetem+magnet_zapusteni+0.1, r=(prumer_sroubu)/2, center = true, $fn=100);
}
}
//WINDGAUGE02A_R03(R03_sila_materialu,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,vule_mezi_statorem_rotorem,R01_sila_materialu_pro_prekriti,R02_sila_mateiralu_pod_lopatkami,S01_sila_materialu);
}
WINDGAUGE02A_R04 (lozisko_prumer_vnitrni,lozisko_prekryv,S01_sila_materialu,prumer_sroubu);

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R05.scad
0,0 → 1,35
$fn=40; // model faces resolution.
include <../configuration.scad>
module WINDGAUGE02A_R05(vyska_pod_magnetem,magnet_zapusteni,magnet_prumer,vyska_hlavy_sroubu,prumer_hlavy_sroubu,prumer_sroubu,vyska_matky,sirka_matky,R05_sirka_matky,S01_sila_materialu)
{
//setihrana matice
difference()
{
//zakladni material
cylinder (h = 2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_zapusteni+vyska_matky, r= R05_sirka_matky/2, $fn=6);
//dira na matku
cylinder (h = vyska_matky+0.2, r= (sirka_matky+0.2)/2, $fn=6);
//otvor pro magnet
translate([0,0,(2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_zapusteni+vyska_matky)-magnet_zapusteni/2+0.01])
cylinder (h = magnet_zapusteni+0.01, r=((magnet_prumer+0.2)/2), center = true, $fn=100);
//zapusteni uchytného sroubu
translate([0,0,(2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_zapusteni+vyska_matky)-vyska_hlavy_sroubu/2+0.1])
cylinder (h = vyska_hlavy_sroubu+1, r=((prumer_hlavy_sroubu+0.2)/2), center = true, $fn=100);
//otvor pro sroub
translate([0,0,(2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_zapusteni+vyska_matky)/2+0.1])
cylinder (h = (2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_zapusteni+vyska_matky)+0.1, r=(prumer_sroubu)/2, center = true, $fn=100);
}
}
WINDGAUGE02A_R05(vyska_pod_magnetem,magnet_zapusteni,magnet_prumer,vyska_hlavy_sroubu,prumer_hlavy_sroubu,prumer_sroubu,vyska_matky,sirka_matky,R05_sirka_matky,S01_sila_materialu);

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_S01.scad
16,11 → 16,11
{
cylinder (h = S01_vyska_zuzene_casti, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*S01_sila_materialu)/2, center = true, $fn=100);
translate([0,0,S01_vyska_zuzene_casti-R02_sila_mateiralu_pod_lopatkami-S01_vyska_komponentu_na_lozisko])
translate([0,0,-S01_vyska_zuzene_casti/2+S01_vyska_zuzene_casti-R02_sila_mateiralu_pod_lopatkami-S01_vyska_komponentu_na_lozisko])
screw_thread((R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*S01_sila_materialu),S01_hloubka_zavitu,55,S01_vyska_zuzene_casti+0.01,PI/2,2);
translate([0,0,-(S01_vyska_zuzene_casti-R02_sila_mateiralu_pod_lopatkami-S01_vyska_komponentu_na_lozisko)/2])
translate([0,0,-(S01_vyska_zuzene_casti/2)+(S01_vyska_zuzene_casti-R02_sila_mateiralu_pod_lopatkami-S01_vyska_komponentu_na_lozisko)/2])
cylinder (h = S01_vyska_zuzene_casti-R02_sila_mateiralu_pod_lopatkami-S01_vyska_komponentu_na_lozisko+0.01, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem)/2, center = true, $fn=100);
57,7 → 57,8
screw_thread(S01_prumer_zavitu,4,55,S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko+0.01,PI/2,2);
}
}
}
64,6 → 65,6
WINDGAUGE02A_S01(R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,S01_vyska_zuzene_casti,S01_vyska_na_elektroniku,S01_vyska_zavitu_na_nasroubovani_drzaku,S01_vyska_prechodu,vule_mezi_statorem_rotorem,S01_vyska_zavitu_na_nasroubovani_drzaku);
//WINDGAUGE02A_S01(R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,S01_vyska_zuzene_casti,S01_vyska_na_elektroniku,S01_vyska_zavitu_na_nasroubovani_drzaku,S01_vyska_prechodu,vule_mezi_statorem_rotorem,S01_vyska_zavitu_na_nasroubovani_drzaku);

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_S02.scad
6,7 → 6,7
PI=3.141592;
module WINDGAUGE02A_S02(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,senzor_delka,senzor_sirka,S01_tolerance_zavit)
module WINDGAUGE02A_S02(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,senzor_delka,senzor_sirka,S01_tolerance_zavit,sirka_matky,magnet_vyska)
{
union()
{
44,19 → 44,37
//otvory na ložisko
translate([0,0,lozisko_vyska/2+S01_sila_materialu])
difference()
{
{
cylinder (h = lozisko_vyska, r=(lozisko_prumer_vnejsi+2*S01_sila_materialu)/2, center = true, $fn=100);
cylinder (h = lozisko_vyska+0.01, r=(lozisko_prumer_vnejsi+0.2)/2, center = true, $fn=100);
}
difference()
{
union()
{
//uchyty na modul
//sloupek 1
translate([-senzor_delka/2,-senzor_sirka/2,0])
SLOUPEK();
}
translate([senzor_delka/2,-senzor_sirka/2,0])
SLOUPEK();
translate([senzor_delka/2,senzor_sirka/2,0])
SLOUPEK();
translate([-senzor_delka/2,senzor_sirka/2,0])
SLOUPEK();
}
translate([0,0,S01_sila_materialu])
cylinder (h = lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r=(lozisko_prumer_vnejsi+0.2)/2, $fn=100);
}
64,26 → 82,28
}
}
//sloupek na senzor
module SLOUPEK()
{
translate([0,0,S01_sila_materialu])
difference () {
cylinder (h = lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky, r= sirka_matky/2+S01_sila_materialu, $fn=20);
translate([0,0,lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky-vyska_matky])
cylinder (h = vyska_matky+0.01, r= (sirka_matky+0.2)/2, $fn=6);
WINDGAUGE02A_S02(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,senzor_delka,senzor_sirka,S01_tolerance_zavit);
translate([0,0,-0.01])
cylinder (h = lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r= (prumer_sroubu+0.2)/2, $fn=10);
}
}
WINDGAUGE02A_S02(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,senzor_delka,senzor_sirka,S01_tolerance_zavit,sirka_matky,magnet_vyska);